Curriculum Vitae. Dr. Arun Kumar Tiwari

Transcription

1 Curriculum Vitae Dr. Ph.D (Thermal and Fluid Engg.) Associate Professor and Associate Dean(DSW) Department of Mechanical Engineering Institute of Engineering & Technology Dr APJ Abdul Kalam Technical, Uttar Pradesh, Lucknow , India. Phone: , s: arun_tiwari25@yahoo.co.in Broad area of specialization: Mechanical Engineering Specific areas of specialization: Nanofluids, Solar Thermal, Heat exchanger. Academic Credentials: Ph.D. (Thermal and Fluid Engineering), IIT (BHU), Varanasi (2013) Thesis: Performance analysis of plate heat exchanger using nanofluids. M.Tech. Alternate Hydro Energy system, IIT-Roorkee (2004) B.Tech. Mechanical Engineering, BIET, Jhansi (2000) Professional Experience: Associate Professor, Department of Mechanical Engineering, I.E.T, lucknow (2017 contd.) Professor, Department of Mechanical Engineering,, ( ) Associate Professor, Department of Mechanical Engineering,, ( ) Reader, Department of Mechanical Engineering,, ( ). Lecturer, Department of Mechanical Engineering, ITM, ( ) Administrative Responsibilities: Associate Dean (DSW), Dr APJ Abdul Kalam Technical, Lucknow (2017 contd.) Training & Placement officer, Institute of Engineering & Technology, Lucknow (2017 contd.) Warden, Bhabha Hostel, Institute of Engineering & Technology, Lucknow (2017 contd.) Associate Dean(Research & Development),,. ( ) Member, IQAC,,. ( ) Coordinator, Accreditation committee Mechanical Engineering (NAAC) ( ) Member, BOS, BIET Jhansi (2013 contd.) Member, BOS,,. ( ) Member, Academic council,,. ( ) Member, Research Promotion Cell,( ) Member, DRC,( ) Incharge, Fluid Mechanics and Fluid Machines Lab( ) Member, Ph.D Admission committee,( ) UG Project co-ordinator( ) Academic supervision: Doctoral Degree (Ph.D.) Mr. Sujeet Kumar Verma, Performance analysis of solar collector using nanofluids, at G.L.A. in Joint Guidence with Prof D.S. Chauhan Vice-Chancellor G.L.A (Awarded 2017). Mr. Anuj Kumar Sharma, An investigation on performance of hybrid nanoparticle enriched cutting fluids in turning operation, at IIT(ISM) Dhanbad in Joint Guidence with Dr. A. R. Dixit, Department of Mechanical Engineering, IIT(ISM) Dhanbad (Awarded 2017). Mr. Vikas Kumar, Experimental investigation on the heat transfer enhancement of hybrid nanofluids in a plate heat exchanger at IIT(ISM) Dhanbad in Joint Guidence with Dr. S. K. Ghosh, Department of Mechanical Engineering, IIT(ISM) Dhanbad (Awarded 2017). Mr. Ravindra Pratap Singh, Investigation of heat transfer and pressure drop characteristics of nanofluids in double- tube heat exchanger, at G.L.A.

2 Mr. Naveen Kumar Gupta, Experimental investigation of nanofluids on heat pipe thermal performance at IIT(ISM) Dhanbad in Joint Guidence with Dr. S. K. Ghosh, Department of Mechanical Engineering, IIT(ISM) Dhanbad. Academic supervision: Master of Technology (M.Tech) Mr. Pawan Kumar Agrawal, Thermal analysis of flat plate solar collector using nanofluids, at G.L.A (completed-2015) Mr. Divyanshu Kumar, Performance of heat exchanger using nanofluids, at G.L.A (completed-2015) Achievements and Awards: GATE qualified. All India Residential Scholarship awarded by Govt. of India. Reviewer, International Journal of Heat and Mass Transfer (Elsevier Publications). Reviewer, Renewable & Sustainable Energy Reviews (Elsevier Publications). Reviewer, Energy Conversion and Management (Elsevier Publications). Reviewer, Experimental Heat Transfer (Taylor & Francis Publications). Reviewer, Neural Computing and Applications (Springer Publications). Reviewer, Heat Transfer - Asian Research (Wiley Publications). Reviewer, Applied Thermal Engineering (Elsevier Publications). Reviewer, Powder Technology (Elsevier Publications). Reviewer, Journal of Mechanical Engineering Science Reviewer, Energy (Elsevier Publications). Reviewer, Heat Transfer Research Reviewer, International Journal of Exergy Research Projects: S.N. Title of the Project Funding Agency Duration From To Grant/Amount mobilized (Rs. lakhs) Principal Investigator /Co- Investigator Ongoing/ Completed* 1 Performance of solar collector using nanofluids 2 Study on direct absorption collector based on nanofluids May,2014 April, July,2015 June, Completed Completed 3 Role of nanofluids in augmenting the thermal performance of solar collectors 4 Investigation of heat transfer and pressure-drop characteristics of hybrid nanofluids in double-tube and plate heat exchanger Jan.2017 Dec Jan.2017 Dec Ongoing Ongoing

3 Research Article published/communicated: Journals: SCI Journals Published: 21 Non-SCI Journals Published: 04 SCI Journals under review: 04 Conference: International Conference: 25 National Conference: 07 Citation Report Total Citation: 602 h-index: 13 i10-index: 14 [23] A.K, Performance Enhancement of Solar Collectors: A Review, Energy Conversion and Management (accepted), Publisher: Elsevier (SCI). Impact factor: 4.380, 5-year Impact factor: [22] A.K., Ghosh P., Sarkar J., Experimental exergy analysis of plate heat exchanger using various nanofluids, International Journal of Heat and Mass Transfer (accepted), Publisher: Elsevier Science (SCI). Impact factor: [21] S, A.K., Experimental exergy analysis of a shell and tube heat exchanger using different baffle angles and nanofluids, Energy Conversion and Management (accepted), Publisher: Elsevier (SCI). Impact factor: [20] Sharma A.K., A.K., Dixit A.R., Dixit A.R., Singhc M., Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation, tribology international 119( 2018) [19] Gupta N. K., A.K., Ghosh S. K., Heat transfer mechanisms in heat pipes using nanofluids- A-Review, Experimental Thermal and Fluid Science, 90 (2018) ,Publisher: Elsevier (SCI). Impact factor: [18] Sharma A.K.,Singh R.K., Dixit A.R., A.K., Novel uses of alumina-mos 2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel, Journal of Manufacturing Processes 30 (2017) , Publisher: Elsevier (SCI). Impact factor: [17] Singh R.K., Sharma A.K., Dixit A.R., A.K., Pramanik A.,Mandal A., Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning, Journal of Cleaner Production 162 (2017) , Publisher: Elsevier (SCI). Impact factor: [16] Verma S.K., A.K., Chauhan D.S., Experimental evaluation flat plate collector using nanofluid, Energy Conversion and Management 134 (2017) , Publisher: Elsevier (SCI). Impact factor: [15] Kumar V, A.K., Ghosh S. K., Effect of variable spacing on performance of plate heat exchanger using nanofluids, Energy 114(2016) , Publisher: Elsevier (SCI). Impact factor: 2.739, 5-year Impact factor: [14] Verma S.K., A.K., Chauhan D.S., Performance augmentation in flat plate solar collector using MgO/water nanofluid, Energy Conversion and Management 124 (2016) , Publisher: Elsevier (SCI). Impact factor: [13] Sharma A.K., A.K.,Dixit A.R., Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A review, Journal of Cleaner Production 127 (2016) 1-18, Publisher: Elsevier (SCI). Impact factor: [12] Kumar V, A.K., Ghosh S. K., Effect of chevron angle on heat transfer performance in plate heat exchanger using ZnO/water nanofluid, Energy Conversion and Management 118(2016) ,Publisher: Elsevier (SCI). Impact factor: [11] Sharma A.K., A.K.,Dixit A.R., Rheological Behaviour of Nanofluids: A Review, Renewable & Sustainable Energy Reviews, 53(2016) ,Publisher: Elsevier (SCI).Impact factor:

4 [10] Kumar V, A.K., Ghosh S. K.,application of nanofluids in plate heat exchanger: a review, Energy Conversion and Management 105 (2015) , Publisher: Elsevier (SCI). Impact factor: [9] Sharma A.K., A.K., Dixit A.R., Progress of nanofluids application in machining: A review, Materials and Manufacturing Processes, 30(2015) Publisher: Taylor & Francis (SCI), Impact factor: [8] A.K., Ghosh P., Sarkar J., Particle concentration levels of various nanofluids in plate heat exchanger for best performance, International Journal of Heat and Mass Transfer 89(2015) , Publisher: Elsevier Science (SCI). Impact factor: [7] Verma S.K., A.K., Progress of Nanofluid Application in Solar Collectors: A Review, Energy Conversion and Management 100 (2015) , Publisher: Elsevier (SCI). Impact factor: [6] A.K., Ghosh P., Sarkar J., Experimental investigation on combined energetic and exergetic performances of a corrugated plate heat exchanger, International Journal of Exergy, 15 (2014) , (SCI), Publisher:Inderscience. Impact factor: [5] A.K., Ghosh P., Sarkar J. Dahiya H., Parekh J., Numerical investigation of heat transfer and fluid flow in plate heat exchanger using nanofluids, International Journal of Thermal Sciences (SCI), 85 (2014) ,Publisher:Elsevier. Impact factor: (ranked 2 th on the science direct top 25 most downloaded papers of the journal). [4] A.K., Ghosh P., Sarkar J., Solar water heating using nanofluids- a comprehensive overview and environmental impact analysis, International Journal of Emerging Technology and Advanced Engineering, 3(3), , [3] A.K., Ghosh P., Sarkar J., Investigation of thermal conductivity and viscosity of nanofluids, Journal of Environmental Research and Development, 7(2), , Impact factor: [2] A.K., Ghosh P., Sarkar J., Heat transfer and pressure drop characteristics of CeO 2 /water nanofluid in plate heat exchanger, Applied Thermal Engineering, 57 (2013) Publisher: Elsevier (SCI). Impact factor: [1] A.K., Ghosh P., Sarkar J., Performance comparison of the plate heat exchanger using different nanofluids, Experimental Thermal and Fluid Science, 49 (2013) Publisher: Elsevier (SCI). Impact factor: (Consecutive three times ranked 5 th, 8 th and 17 th on the sciencedirect top 25 most downloaded papers of the journal). Conference papers presented/communicated: [27] Sharma A.K., A.K., Dixit A.R., Investigation into Performance of SiO 2 Nanoparticle Based Cutting Fluid in Machining Process:4 th International conference on Materials processing and characterization, GRIET Hyderabad, India, 12 th -13 th March 2016, Materials Today: Proceedings, Publisher: Elsevier. [26] Kumar.V., A.K.,Ghosh S.K., Characterization and performance of nanofluids in plate heat exchanger: 4 th International conference on Materials processing and characterization, GRIET Hyderabad, India, 12 th -13 th March 2016, Materials Today: Proceedings, Publisher: Elsevier. [25] Verma S.K., A.K., Characterization of Nanofluids as an advanced heat transporting medium for Energy Systems.:4 th International conference on Materials processing and characterization, GRIET Hyderabad, India, 12 th -13 th March 2016, Materials Today: Proceedings, Publisher: Elsevier. [24] Kumar.V., A.K.,Ghosh S.K., Heat transfer augmentation in plate heat exchanger using nanofluid: 17 th Indian Society of Mechanical Engineers (ISME) Conference on Advances in Mechanical Engineering, IIT Delhi, India, October 3 rd -4 th, [23]Verma S.K., A.K.,Performance Analysis of Flat-Plate Solar Collector using Nanofluids :International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama, India, July 8 th -10 th,materials Today: Proceedings, Publisher: Elsevier.

5 [22] Sharma A.K., A.K.,Dixit A.R., Characterization of TiO 2, Al 2 O 3 and SiO 2 Nanoparticle based Cutting Fluids: International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama, India, July 8 th -10 th,materials Today: Proceedings, Publisher: Elsevier. [21] Sharma A.K., Singh R, K., Dixit A.R., A.K., Characterization and Experimental investigation of Al 2 O 3 nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quantity lubrication (MQL): International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama, India, July 8 th -10 th, Materials Today: Proceedings, Publisher: Elsevier. [20] Sharma A.K., Singh R, K., Dixit A.R., A.K.,Tribological investigation of nanoparticle enriched cutting fluid in machining: International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama, India, July 8 th -10 th, Materials Today: Proceedings,Publisher: Elsevier. [19] Bajaj R., A.K.,Dixit A.R., Progress of micro/nano powder mixed electric discharge machining: A Review: International conference on Recent Advances in Nano-Science and Technology (RAINSAT-2015), Sathyabama, India, July 8 th -10 th,materials Today: Proceedings,Publisher: Elsevier. [18] Verma S.K., A.K., Application of Nanoparticles in Solar collectors: A Review, 4 th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015) ,Publisher: Elsevier. [17] Bajaj R., A.K.,Dixit A.R., Current trends in electric discharge machining using micro and nano powder materials- A Review, 4 th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015 ) ,Publisher: Elsevier. [16] Sharma A.K., A.K.,Dixit A.R., Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique- A Review,4 th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015) ,Publisher: Elsevier. [15] Sharma A.K., A.K.,Dixit A.R., Mechanism of Nanoparticles functioning and Effects in Machining Processes:A Review, 4 th International Conference on Materials Processing and Characterization, Materials Today: Proceedings 2 (2015) ,Publisher: Elsevier. [14] Verma S.K., A.K., application of nanofluids in direct absorbing solar collector: a review: International Conference On Science Technology & Management, YMCA, New Delhi, 1 Feb [13] Vikas Kumar, A.K.,, Subrata Kumar Ghosh Implementation of nanofluids in plate heat exchanger: A Review : International Conference On Science Technology & Management, YMCA, New Delhi, 1 Feb [12] A.K.,.,Thermal performance of shell and tube heat exchanger using nanofluids:2 nd International Conference on Recent Devlopement In Mechanical,Production,Industrial and Automobile Engineering(ICMPIAE 2015),Chandigarh, India, 4 th January [11] A.K.,., Enhancement of heat transfer by using nanofluids in a heat exchanger:2 nd International Conference on Recent Devlopement In Mechanical,Production,Industrial and Automobile Engineering(ICMPIAE 2015),Chandigarh, India, 4 th January [10] D. Kumar, A.K., S. Verma, Thermal analysis using nanofluid in a shell & tube heat exchanger a review: 4 th International conference on emerging paradigms and practices in global technology, National Institute of Technology (NIT), Hamirpur, India, 22 th -24 th December [9] P.K.Agrawal, A.K., S. Verma, Improvement of efficiency of flat-plate solar collector using nanofluids in a solar water heater system: 4 th International conference on emerging paradigms and practices in global technology, National Institute of Technology (NIT), Hamirpur, India, 22 th -24 th December 2014.

6 [8] A.K., V. Kumar, P. Ghosh, J. Sarkar, Energetic and exergetic performances of Al 2 O 3 /water nanofluid in plate heat exchanger: Proceedings of the 22 th National and 11th International ISHMT- ASME Heat and Mass Transfer Conference, December 28-31, 2013, IIT Kharagpur, India. [7] A.K., P. Ghosh, J. Sarkar, Solar water heating using nanofluids- a comprehensive overview and environmental impact analysis: International Conference on Energy Resources and Technologies for Sustainable Developmen, BES Univesity Shibpur Howrah, India., February [6] V. Kumar, A.K., Numerical Investigation of Plate Heat Exchanger, in: A National Conference On Emerging Trends in Mechanical & Electrical Engineering (paper code ME- 222),Integral Lucknow (U.P.) India, June 12-13, [5] A.K., P. Ghosh, J. Sarkar, A review on application of nanofluids in solar water heating systems, in: A National Conference On Advances in Mechanical Engineering & Emerging Technologies (paper code - S01:17 AMEET-054), Kamla Nehru Institute of Technology (K. N. I.T) Sultanpur (U.P.) India, April 07-08, [4] V. Kumar, A.K., Application and challenges of nanofluids, in: A National Conference On Advances in Mechanical Engineering & Emerging Technologies (paper code - S01:28 AMEET-075), Kamla Nehru Institute of Technology (K. N. I.T) Sultanpur (U.P.) India, April 07-08, [3] A.K., P. Ghosh, J. Sarkar, Performance analysis of a flat plate solar collectors using Al 2 O 3 /water nanofluid in: An International Conference on Energy Security, Global Warming and Sustainable Climate, Banaras Hindu (BHU), Varanasi,India, February 07-09, [1] A. K., P. Ghosh, J. Sarkar, Modeling of Thermal Conductivity of Al 2 O 3 /water Nanofluid using Neural Network, in: National Conference on Artificial Intelligence: Agent, Theory and Applications, AIATA-2011, IIT (BHU), Varanasi,India, 9th -11th December 2011, pp Workshop/Conference attended: Attended One Week TEQIP-II Sponsored National Workshop on Advanced Computational Fluid Dynamics ACFD-2014 Organised by Department of Applied Mechanics MNNIT Allahabad,28June- 02July, 2014 Attended Two Week ISTE Workshop on Fluid Mechanics Organised by IIT Kharagpur through National Mission on Education (MHRD,Govt. of India),20 May- May 30,2014. Attended seven days Workshop on Technical Communication For Research Scholars Organised by Department of Extension Education, Institute of Agricultural Science, Banaras Hindu (BHU), Varanasi,India, May 05-11, Attended three days conference in: Conference on Mechanical Engineering and technology (COMET 2012),Department of Mechanical Engineering, IIT (BHU), Varanasi,India, March 02-04, Attended two days conference in: 25th National Convention of metallurgical and materials engineers (IEI) and national seminar Design and development of materials for advanced technologies (DMAT-2012),Department of Metallurgical Engineering, IIT (BHU), Varanasi,India, January 23-24, References Prof. J. P. Dwivedi, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India.Mobile: ,E:Mail-jpd@bhu.ac.in Prof. V. P. Singh, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India. Mobile: , vp_singh56@yahoo.co.in Prof. Pradyumna Ghosh, Department of Mechanical Engineering, Indian Institute of Technology (BHU), Varanasi, India. Mobile: , pghosh.mec@iitbhu.ac.in Date Place: Lucknow ( )