THESIS. Organized to Meet a Part of the Requirements to Achieve the Master Degree of Mechanical Engineering Department

Transcription

1 INFLUENCE OF VOLUME AND ANGLE ATTACK OF PELTON TURBINE BUCKET ON THE EFFICIENCY OF MICRO HYDRO THESIS Organized to Meet a Part of the Requirements to Achieve the Master Degree of Mechanical Engineering Department By: Mohammed Meqdad Saleh Alnakhlani S POSTGRADUATE PROGRAM SEBELAS MARET UNIVERSITY SURAKARTA 2014

2

3

4

5 MOHAMMED MEQDAD SALEH ALNAKHLANI, Student Number: S INFLUENCE OF VOLUME AND ANGLE ATTACK OF PELTON TURBINE BUCKET ON THE EFFICIENCY OF MICRO HYDRO Supervisor I: Dr. Dwi Aries Himawanto, S.T., M.T. Supervisor II: D Danardono Dwi Prija T, S.T., M.T., Ph.D. Thesis: Mechanical Engineering Department, Graduate School, Sebelas Maret University. Abstract Pelton turbine is an engine that facilitates continuous power as a wheel or a rotor continually turns due to the pressure of fast moving water through the bucket, where a bucket receives water from the surging nozzle. The objective of this research was to investigate the highest efficiency among different types of pelton turbine through the modification of bucket volume, bucket angle attack. The experiment was conducted at Energy Conversion Laboratory of Sebelas Maret University. The comparative study among the different parameters shows that the value of maximum efficiency was 19.58%, which was obtained at +15% bucket size and 92 o angle of attack. It was gained likely due to the collision produced by the jet water in the middle of the bucket, in which the water loading occupied the large area on the surface of the bucket and promoted the increasing speed. It is expected that the result on the appropriate size and angle attack of bucket of this experiment can be manufactured in the future or develop it for achieving maximum pelton turbine efficiency. Keywords: Pelton Turbine, Bucket volume, Bucket Angle Attack, Efficiency.

6 PREFACE Foremost, I would like to express my gratitude to my supervisors Dr. Dwi Aries Himawanto, S.T., M.T for his continuous support during my master study and research, I am extremely grateful for his patience, motivation and enthusiasm to convey his immense knowledge. He was very helpful for me in the all time of my research and writing of this thesis. Besides to the head of mechanical engineering department Dr. Techn Suyitno, ST. MT, I would also like to thank the rest of my thesis committee D Danardono Dwi Prija T, S.T., M.T., Ph.D for his encouragement, teaching and insightful comments. My sincere thanks also go to my classmates in UNS University for their stimulating discussions and helping. And last but not least, I would also like to dedicate this work to my beloved parents and my family for their moral and financial supports, I am totally convinced that I would never come to exist and have succeeded without them. Thank you all. Sincerely. Surakarta, November 2014

7 LIST OF CONTENTS TITLE... i APPROVAL PAGE... ii AUTENTICATION... iii ORIGINALITY AND PUBLICATION STATEMENT... iv ABSTRACT... v PREFACE... vi LIST OF CONTENTS... vii LIST OF FIGURES... ix LIST OF TABLES... x CHAPTER I INTRODUCTION Background of the study Problem Statement Research Limitation Objectives Significance of the Study... 3 CHAPTER II LITERATURE REVIEW Study Literature Basic Theory Micro Hydro Bucket... 9 CHAPTER III RESEARCH METHODOLOGY Materials and Equipment Methods and Scheme of Research Data Analysis CHAPTER IV RESULT AND ANALYSIS Head Measurement Water Flow Rate Measurement Triangle Velocity Electric Power and Efficiency Measurement... 24

8 CHAPTER V CONCLUSION AND SUGGESTION Conclusion Suggestion REFERENCES Curriculum Vitae... 32

9 LIST OF FIGURE Figure 2.1 Impulse turbine... 7 Figure 2.2 Reaction turbine... 8 Figure 2.3 Schematic diagram of micro hydro electric power plant... 9 Figure 2.4 Schematized view of a pelton turbine Figure 2.5 Pelton turbine bucket Figure 3.1 Installation pelton turbine test Figure 3.2 Flow Chart of Research Figure 3.3 Standard pelton turbine bucket Figure 3.4 New design of pelton turbine buckets Figure 3.5 Pelton turbine testing scheme Figure 4.1 Relation between opening valve and the head Figure 4.2 Triangle velocity in pelton turbine bucket Figure 4.3 A view of the relation between the flow rate and efficiency at different bucket size and angle attack Figure 4.4 A view of the relation between the flow rate and rpm at different bucket size and angle attack Figure 4.5 Jet water... 29

10 LIST OF TABLE Table 2.1 Classification of hydropower by size... 7 Table 2.2 Impulse and reaction turbine... 8 Table 4.1 Head calculations for several opening valve Table 4.2 Water flow rate calculations for several opening valve Table 4.3 The results of jet water efficiency for three type of bucket Table 4.4 The results of different parameters obtained from standard bucket size and 90 angle attack Table 4.5 The results of different parameters obtained from +15% bucket size and 92 angle attack Table 4.6 The results of different parameters obtained from -15% bucket size and 88 angle attack... 26