Foam Concentrate Catalogue Catálogo Espumógeno

Transcription

1 Foam Concentrate Catalogue Catálogo Espumógeno Edition / Edición: 01/2018

2 Proteínico / Protein FOAMIN P3 FOAMIN P6 Fluoroproteínico / Fluoroprotein APIROL FX3 C APIROL FX6 C UNIVEX 3-3 SUPER UNIVEX 3-6 SUPER Fluoroproteínico Filmante / FFFP Fluoroprotein HYDREX 3 HYDREX 6 Sintético / Synthetic PLUREX M PLUREX TF3 AFFF / AFFF-AR HYDRAL 1 PLUS HYDRAL T1 HYDRAL 3C HYDRAL T3 HYDRAL 3S HYDRAL 6C HYDRAL 6S HYDRAL 6 UL HYDRAL 1S HYDRAL 3 CEX HYDRAL 3 FP HYDRAL 6 CEX HYDRAL AR 3-6M HYDRAL AR UL HYDRAL AR 3-3M HYDRAL AR 3-3S+ HYDRAL AR 1-1 FP

3 FOAMIN P3 FOAM CONCENTRATE Application FOAMIN P3 Protein Foam Concentrate is intended for use on Class B hydrocarbon fuels having low water solubility such as various crude oils, gasoline, diesel fuels, aviation fuels, etc. It is not suitable for use on fuels having appreciable water solubility (polar solvents), i.e., methyl and ethyl alcohol, acetone and methyl ethyl ketone. This concentrate can be used only with air aspirating type discharge devices. It can also be used with foam compatible dry chemical extinguishing agents without regard to the order of application, to provide even greater fire protection capability. Protein foam concentrate at 3% for hydrocarbons fires FOAMIN P3 Protein Foam Concentrate is formulated from hydrolysed protein, foam stabilizers (metal salts), bactericide, corrosion inhibitors, freezing point depressants and solvents. It is transported and stored as a concentrate to provide ease of use and considerable savings in weight and space. It is intended for use as a 3% proportioned solution either in fresh, salt or hard water. The correct proportioning ratio is 3 parts of concentrate to 97 parts of water. FOAMIN P3 can be used by most conventional foam equipment such as: Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductor Fixed or handline nozzles or monitors with fixed induction/ pick up tubes Approvals El FOAMIN P3 is approved or listed according to: UL-162 IMO Msc Circ. 582 Two fire extinguishing mechanisms are in effect when using FOAMIN P3. First, a foam blanket is formed which works to prevent the release of fuel vapour. Second, the water content of the foam provides a cooling effect. Performance FOAMIN P3 is measured against specifications and standards such as Underwriters Laboratories Standard UL 162, latest edition. When used with fresh or salt water or water of any hardness at the correct dilution and with most conventional foam making equipment, the expansion ratio will vary depending on the performance characteristics of the equipment. Air aspirating discharge devices produce expansion ratios from 8 to 1 to 12 to 1 depending primarily on type and flow rate. In general, the higher the flow rate the higher the expansion ratio. Thus, monitors and foam chambers normally produce higher expansion ratios than foam water sprinkler heads and hand held type nozzles. Typical expansion ratios for foam chambers are in the range of 5 to 1 to 7 to 1, and for foam water sprinkler heads in the range of 3 to 1 to 6 to 1. Storage and shelf life FOAMIN P3 Protein foam has an operational temperature range of 10 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or pails) within the temperature limits specified, or in equipment recommended by the manufacturer as part of the foam system, the shelf life of FOAMIN P3 Protein Foam Concentrate is generally in excess of 10 years. If the product is frozen during storage or transportation, thawing will render the product completely usable. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

4 FOAMIN P3 FOAM CONCENTRATE Safety and handling See our corresponding Material Safety data sheet. Propiedades típicas FOAMIN P3 P 3% Compatibility There are no specifications or standards which address the subject of compatibility of different manufacturer s brands of protein foam concentrates. In an emergency or if the manufacturer has supporting test data to substantiate that the mixture meets the same requirements as the individual component concentrates, they may be mixed together in the same storage vessel. Different types of foam concentrates, i.e., AFFF and Protein base should not be mixed under any circumstances. Quality insurance FOAMIN P3 as with all SABO Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is anufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Fire Classes Shape and color Smell Density (20ºC) A y B Brown, clear liquid Characteristic, Protein 1,16 + 0,02 [g/ml] ph (concentrate, 20ºC) Viscosity 20ºC ,0 [mm 2 /s] Sediment (EN 1568) 0,25 [%] Admixing ratio 3 [% Vol.] Expansion ratio (EN ) 7,0 Drain time 25% (20ºC, EN ) Drain time 50% (20ºC, EN ) Expansion 5:00 9:00 Low, (Medium) Freezing point Pour point Reccomended storage / usage temperature -15 [ºC] -12 [ºC] -10 a +60 [ºC] Ordering information FOAMIN P3 can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F603321C1 25 Litre can F603321D1 200 Litre drum F603321T Litre tote F603321B1 Bulk (Litre) Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

5 DATA SHEET FOAMIN P6 Foam Concentrate Regular protein foam concentrate at 6% for hydrocarbons fires FOAMIN P6 Protein Foam Concentrate is formulated from hydrolysed protein, foam stabilizers (metal salts), bactericide, corrosion inhibitors, freezing point depressants and solvents. It is transported and stored as a concentrate to provide ease of use and considerable savings in weight and space. It is intended for use as a 6% proportioned solution either in fresh, salt or hard water. The correct proportioning ratio is 6 parts of concentrate to 94 parts of water. Two fire extinguishing mechanisms are in effect when using FOAMIN P6. First, a foam blanket is formed which works to prevent the release of fuel vapour. Second, the water content of the foam provides a cooling effect. Performance When used with fresh or salt water or water of any hardness at the correct dilution and with most conventional foam making equipment, the expansion ratio will vary depending on the performance characteristics of the equipment. Air aspirating discharge devices produce expansion ratios from 8 to 1 to 12 to 1 depending primarily on type and flow rate. In general, the higher the flow rate the higher the expansion ratio. Therefore, monitors and foam chambers normally produce higher expansion ratios than foam water sprinkler heads and hand held type nozzles. Typical expansion ratios for foam chambers are in the range of 5 to 1 to 7 to 1, and for foam water sprinkler heads in the range of 3 to 1 to 6 to 1. Application FOAMIN P6 Protein Foam Concentrate is intended for use on Class B hydrocarbon fuels having low water solubility such as various crude oils, gasoline, diesel fuels, etc. It is not suitable for use on fuels having appreciable water solubility (polar solvents), i.e., methyl and ethyl alcohol, acetone and methyl ethyl ketone. This concentrate can be used only with air aspirating type discharge devices. It can also be used with foam compatible dry chemical extinguishing agents without regard to the order of application, to provide even greater fire protection capability. FOAMIN P6 can be used by most conventional foam equipment such as: n Balance pressure pump proportioning equipment n Bladder tank and related proportioners n Around-the-pump proportioners n Fixed and portable In-line venturi type inductor n Fixed or handline nozzles or monitors with fixed induction/ pick up tubes Approvals FOAMIN P6 is approved or listed according to: n IMO MSC Circ. 582 n UNI 9493 by Ministry of Interior Italy

6 Storage and shelf life FOAMIN P6 Protein foam has an operational temperature range of 10 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or pails) within the temperature limits specified, or in equipment recommended by the manufacturer as part of the foam system, the shelf life of FOAMIN P6 Protein foam concentrate is generally in excess of 10 years. If the product is frozen during storage or transportation, thawing will render the product completely usable. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. For more specific information, please at: sabofoam.levate@tycoint.com Safety and handling See our corresponding Material Safety data sheet. Compatibility There are no specifications or standards which address the subject of compatibility of different manufacturer s brands of protein foam concentrates. In an emergency or if the manufacturer has supporting test data to substantiate that the mixture meets the same requirements as the individual component concentrates, they may be mixed together in the same storage vessel. Different types of foam concentrates, i.e., AFFF and protein base should not be mixed under any circumstances. Quality Assurance FOAMIN P6 as with all TYCO Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Typical properties n FOAMIN P6 P 6% n Fire Classes A and B n Shape and colour Brown, clear liquid n Smell Characteristic, Protein n Density (20 C) 1.16 ±0.02 [g/ml] n ph (concentrate, 20 C) n Viscosity 20 C 6.0 ±4.0 [mm 2 /s] n Sediment (EN 1568) 0.25 [%] n Admixing ratio 6 [% Vol.] n Expansion Ratio (EN ) 7.0 n Drain Time 25%, 5:00 (20 C, EN ) n Drain Time 50%, 9:00 (20 C, EN ) n Expansion Low, (Medium) n Freezing Point -15 [ C] n Pour Point -12 [ C] n Recommended storage/ -10 to +60 [ C] Usage temperature Ordering information FOAMIN P6 can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). Part No. n F606322C1 n F606322D1 n F606322T1 n F606322B1 25 Litre can 200 Litre drum 1000 Litre tote

7 APIROL FX3 C 3% ESPUMÓGENO APIROL FX3 C 3% Fluoroprotein Foam Concentrate combines hydrolyzed protein with fluorochemical surfactants, foam stabilizers (metal salts), bactericide, corrosion inhibitors, freeze point depressants and solvents to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires. This protein-based foam concentrate is intended for forceful or gentle firefighting applications at 3% solution in fresh, salt, or hard water. APIROL FX3 C foam solution utilizes two suppression mechanisms: n The foam blanket blocks oxygen supply to the fuel and suppresses fuel vapor. Protein based foam agents produce a foam blanket with very good heat stability and burn-back resistance. n The water content of the foam solution produces a cooling effect for additional fire suppression. TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density ph Refractive Index Viscosity* Clear brown liquid 1.12 ± 0.02 g/ml minimum 6.0 ± 4.0 cst Sediment** 0.1% Pour Point 12 C Freeze Point 15 C *Cannon-Fenske viscometer **EN1568:2008 protocol The environmentally-mindful APIROL FX3 C 3% Fluoroprotein Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the EC6 U.S. Environmental Protection Agency 2010/15 PFOA Stewardship Program. NVIRO-MINDED FORMULA Approvals, Listings, and Standards APIROL FX3 C 3% Fluoroprotein Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n UL Standard 162, Foam Liquid Concentrates n EN 1568:2008 Parts 1, 3 n IMO MSC.1/Circ.1312 n MED Modules B and D Application EN APIROL FX3 C 3% Fluoroprotein Concentrate is intended for use on Class B hydrocarbon fuel fires with low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels with appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. This concentrate can be used only with air aspirating type discharge devices. APIROL FX3 C 3% Fluoroprotein Concentrate can be ideal for fixed, semi-fixed, and emergency response firefighting applications such as: n Hydrocarbon fuel storage tanks n Hydrocarbon fuel industrial/processing facilities n Flammable liquid containment areas n Docks and on-board marine systems n Low temperature operations Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

8 Foaming Properties APIROL FX3 C 3% Fluoroprotein Concentrate may be effectively applied using most conventional air aspirating foam discharge equipment at a 3% dilution with fresh, salt, or hard water. The expansion ratio will vary depending on the performance characteristics of the equipment. Air aspirating discharge devices produce expansion ratios from 6:1 to 12:1, depending on the type of device and flow rate. Typical expansion ratios for foam chambers are in range of 5:1 to 7:1. TYPICAL FOAM CHARACTERISTICS (Fresh and Salt Water) Proportioning Rate 3% Expansion Ratio % Drain Time (min:sec) 5:00 50% Drain Time (min:sec) 9:00 **per EN , 2008 protocol Proportioning The recommended operational temperature range for APIROL FX3 C 3% Fluoroprotein Concentrate is 10 C to 60 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with a fixed eductor/pick-up tubes Storage and Handling APIROL FX3 C 3% Fluoroprotein Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the recommended foam system equipment as outlined in SABO Española Products Technical Bulletin Storage of Foam Concentrates. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of APIROL FX3 C Concentrate can be maximized through optimal storage conditions and proper handling. SABO FOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing APIROL FX3 C Concentrate with other fluoroprotein foam concentrates for long-term storage is not recommended. Different types of foam concentrates (i.e. AFFFs and fluoroproteins) should not be mixed together under any circumstances. Use in conjunction with comparable 3% fluoroprotein firefighting foam products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted APIROL FX3 C 3% Fluoroprotein Concentrate. Certain materials such as black iron piping are also not recommended for use due to the corrosiveness and solids content of protein-based agents. Please refer to SABO Española Products Technical Bulletin Acceptable Materials of Construction for recommendations and guidance regarding compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection APIROL FX3 C 3% Fluoroprotein Concentrate should be inspected periodically in accordance with NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to SABO Española Foam Analytical Services or other qualified laboratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance APIROL FX3 C 3% Fluoroprotein Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information APIROL FX3 C 3% Concentrate is available in pails, drums, totes, or bulk shipment. Shipping Container Part No. Weight Volume F503378C1 25 L Pail kg m 3 F503378D1 200 L Drum kg m 3 F503378T L Tote 1100 kg m 3 Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

9 APIROL FX6 C 6% ESPUMÓGENO APIROL FX6 C 6% Fluoroprotein Foam Concentrate combines hydrolyzed protein with fluorochemical surfactants, foam stabilizers (metal salts), bactericide, corrosion inhibitors, freeze point depressants and solvents to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires. This protein-based foam concentrate is intended for forceful or gentle firefighting applications at 6% solution in fresh, salt, or hard water. APIROL FX6 C foam solution utilizes two suppression mechanisms: n The foam blanket blocks oxygen supply to the fuel and suppresses fuel vapor. Protein based foam agents produce a foam blanket with very good heat stability and burn-back resistance. n The water content of the foam solution produces a cooling effect for additional fire suppression. TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density ph Refractive Index Viscosity* Clear brown liquid 1.11 ± 0.02 g/ml minimum 4.5 ± 2.0 cst Sediment** 0.1% Pour Point 12 C Freeze Point 15 C *Cannon-Fenske viscometer **EN1568:2008 protocol The environmentally-mindful APIROL FX6 C 6% Fluoroprotein Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. Environmental Protection Agency EC6 2010/15 PFOA Stewardship Program. NVIRO-MINDED FORMULA Approvals, Listings, and Standards APIROL FX6 C 6% Fluoroprotein Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n UL Standard 162, Foam Liquid Concentrates n EN 1568:2008 Parts 1, 3 Application EN APIROL FX6 C 6% Fluoroprotein Concentrate is intended for use on Class B hydrocarbon fuel fires with low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels with appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. This concentrate can be used only with air aspirating type discharge devices. APIROL FX6 C Concentrate can be ideal for fixed, semi-fixed, and emergency response firefighting applications such as: n Hydrocarbon fuel storage tanks n Hydrocarbon fuel industrial and processing facilities n Flammable liquid containment areas n Docks and on-board marine systems n Low temperature operations Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

10 Foaming Properties APIROL FX6 C 6% Fluoroprotein Concentrate may be effectively applied using most conventional air aspirating foam discharge equipment at a 6% dilution with fresh, salt, or hard water. The expansion ratio will vary depending on the performance characteristics of the equipment. Air aspirating discharge devices produce expansion ratios from 6:1 to 12:1, depending on the type of device and flow rate. Typical expansion ratios for foam chambers are in range of 5:1 to 7:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 6% Expansion Ratio % Drain Time (min:sec) 5:00 50% Drain Time (min:sec) 9:00 **per EN , 2008 protocol Proportioning The recommended operational temperature range for APIROL FX6 C 6% Fluoroprotein Concentrate is 10 C to 60 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes Storage and Handling APIROL FX6 C 6% Fluoroprotein Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the recommended foam system equipment as outlined in SABO Española Products Technical Bulletin Storage of Foam Concentrates. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of APIROL FX6 C Concentrate can be maximized through optimal storage conditions and proper handling. SABO FOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing APIROL FX6 C Concentrate with other fluoroprotein foam concentrates for long-term storage is not recommended. Different types of foam concentrates (i.e. AFFFs and fluoroproteins) should not be mixed together under any circumstances. Use in conjunction with comparable 6% fluoroprotein firefighting foam products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted APIROL FX6 C 6% Fluoroprotein Concentrate. Certain materials such as black iron piping are also not recommended for use due to the corrosiveness and solids content of protein-based agents. Please refer to SABO Española Products Technical Bulletin Acceptable Materials of Construction for recommendations and guidance regarding compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection APIROL FX6 C 6% Fluoroprotein Concentrate should be inspected periodically in accordance with NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to SABO Española Products Foam Analytical Services or other qualified laboratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance APIROL FX6 C 6% Fluoroprotein Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information APIROL FX6 C 6% Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part No. Weight Volume F506379C2 20 L Pail 22.1 kg m 3 F506379C1 25 L Pail kg m 3 F506379D1 200 L Drum kg m 3 F506379T L Tote 1100 kg m 3 For bulk orders consult Account Representative. Safety Data Sheets (SDS) are available at Note: The converted values in this document are for dimensional reference only and do not reflect an actual measurement. SABO FOAM, APIROL, and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

11 UNIVEX 3X3 SUPER FOAM CONCENTRATE Application UNIVEX 3x3 Super AR-Fluoroprotein Foam Concentrate is intended for use on any Class B flammable liquids both on hydrocarbon fuels having low water solubility (crude oils, gasoline, diesel fuels, aviation fuels, etc.) and is also suitable for use on polar solvent fuels having water solubility (Acetone, Isopropanol, and MTBE). This concentrate can be used only with air aspirating type discharge devices. Newtonian low viscosity alcohol-resistant fluoroprotein (FP-AR) foam concentrate for 3% application on both hydrocarbon fires and polar liquid fires UNIVEX 3x3 Super is a totally new formulated universal foam for severe and diversified marine applications. It is a superior alcohol resistant fluoroprotein foam concentrate (FP-AR) for extinguishing flammable hydrocarbon and polar solvent liquid fires at a unique 3% induction ratio. UNIVEX 3x3 Super protein base provides highly stable foams with drainage times that do not suffer from extreme heat conditions in large tank fires. Unlike other alcohol resistant like AR-AFFF foam concentrates, it has the fluidity and low viscosity of a regular protein foam concentrate. UNIVEX 3x3 Super is the right choice for maximum safety and cost-effectiveness for hydrocarbons and polar solvent fires. It can also be used with foam compatible dry chemical extinguishing agents without regard to the order of application, to provide even greater fire protection capability. UNIVEX 3x3 Super can be used by most conventional foam equipment such as: Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Fixed or handline nozzles with fixed induction/pick up tubes Approvals UNIVEX 3x3 Super is tested and approved according to: IMO MSC Circ 1312 Type Approval MED B-D (Marine Equipment Directive) UNI 9493 (Minister of Interior Italy) GESIP 2.5 L/m2/min (France) Performance UNIVEX 3x3 Super is measured against latest specifications and standards such as IMO circular 1312 on Heptane, Acetone and Isopropanol (IPA). When used with fresh or salt water or water of any hardness at the correct dilution and with most conventional foam making equipment, the expansion ratio will vary depending on the performance characteristics of the equipment. Air aspirating discharge devices produce expansion ratios from 6:1 to 12:1 depending primarily on type and flow rate. In general, the higher the flow rate the higher the expansion ratio. Typical expansion ratios for air aspirating foam nozzles are in the range of 5:1 to 7:1, and for foam water monitors in the range of 4:1 to 8:1. We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

12 UNIVEX 3X3 SUPER FOAM CONCENTRATE Storage and shelf life UNIVEX 3x3 Super has an operational temperature range of 13 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or pails) within the temperature limits specified, or in equipment recommended by the manufacturer as part of the foam system, the shelf life of UNIVEX 3x3 Super Fluoroprotein foam concentrate is generally in excess of 10 years. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and handling See our corresponding Material Safety data sheet. Compatibility Typical properties UNIVEX 3X3 Super Fire classes Shape and colour Smell Density (20ºC) FP AR 3X3 B Brown, clear liquid Characteristic, Protein 1,13 + 0,02 [g/ml] ph (concentrate, 20ºC) Viscosity 20ºC ,0 [mm 2 /s] Sediment (EN 1568) 0,25 [%] Admixing ratio 3 [% Vol.] Expansion ratio (EN ) 7,0 Drain Time 25% (20ºC, EN ) Drain Time 50% (20ºC, EN ) Expansion 5:00 9:00 Baja, (Media) There are no specifications or standards which address the subject of compatibility of different manufacturer s brands of fluoroprotein alcohol resistant foam concentrates. In an emergency or if the manufacturer has supporting test data to substantiate that the mixture meets the same requirements as the individual component concentrates, they may be mixed together in the same storage vessel. Freezing Point Pour point Recommended storage/ Usage temperature -18 [ºC] -15 [ºC] -13 a +60 [ºC] Different types of foam concentrates, i.e., AFFF and Fluoro- Protein Alcohol Resistant base should not be mixed under any circumstances.. Quality insurance UNIVEX 3x3 Super as with all TYCO Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed.therefore guaranteed. Ordering information UNIVEX 3x3 Super can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery). F513353C1 25 Litre can F513353D1 200 Litre drum F513353T Litre tote We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

13 UNIVEX 3X6 SUPER FOAM CONCENTRATE Application UNIVEX 3x6 Super AR-Fluoroprotein Foam Concentrate is intended for use on any Class B flammable liquids both on hydrocarbon fuels having low water solubility (crude oils, gasoline, diesel fuels, aviation fuels, etc.) and is also suitable for use on Polar solvent fuels having water solubility (Acetone, Isopropanol, and MTBE) at the appropriate concentration. This concentrate can be used only with air aspirating type discharge devices. Newtonian low viscosity fluoroprotein Alcohol-Resistant (FP-AR) foam concentrate for 3% application on hydrocarbon fires and 6% on polar liquid fires UNIVEX 3x6 Super is a totally new formulated universal foam for severe and diversified Marine applications. It is a superior alcohol resistant fluoroprotein foam concentrate (FP-AR) for extinguishing flammable hydrocarbon and polar solvent liquid fires at 3% induction ratio on Hydrocarbon fires and at 6% induction ratio on Polar solvent and Alcohol fires. UNIVEX 3x6 Super protein base provides highly stable foams with drainage times that do not suffer from extreme heat conditions in large tank fires. Unlike other alcohol resistant like AR-AFFF foam concentrates, it has the fluidity and low viscosity of a regular protein foam concentrate. It can also be used with foam compatible dry chemical extinguishing agents without regard to the order of application, to provide even greater fire protection capability. UNIVEX 3x6 Super can be used by most conventional foam equipment such as: Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Approvals UNIVEX 3x6 Super is tested and approved according to: IMO MSC Circ Type Approval MED B - D (Marine Equipment Directive) EN1568:2008 Part 3 and 4 UNIVEX 3x6 Super is the right choice for maximum safety and cost effectiveness for hydrocarbons and polar solvent fires. Performance UNIVEX 3x6 Super is measured against latest specifications and standards such as IMO circular 1312 on Heptane, Acetone and Isopropanol (IPA). When used with fresh or salt water or water at the correct dilution and with most conventional foam making equipment, the expansion ratio will vary depending on the performance characteristics of the equipment. Air aspirating discharge devices produce expansion ratios from 6:1 to 12:1 depending primarily on type and flow rate. In general, the higher the flow rate the higher the expansion ratio. Typical expansion ratios for air aspirating foam nozzles are in the range of 5:1 to 7:1, and for foam water monitors in the range of 4:1 to 8:1. Storage and shelf life UNIVEX 3x6 Super has an operational temperature range of 10 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or pails) within the temperature limits specified, or in equipment recommended by the manufacturer as part of the foam system, the shelf life of UNIVEX 3x6 Super Fluoroprotein foam concentrate is generally in excess of 10 years. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance.. We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

14 UNIVEX 3X6 SUPER FOAM CONCENTRATE Safety and handling See our corresponding Material Safety data sheet. Typical properties UNIVEX 3X6 Super FP AR 3X6 Compatibility There are no specifications or standards which address the subject of compatibility of different manufacturer s brands of fluoroprotein alcohol resistant foam concentrates. In an emergency or if the manufacturer has supporting test data to substantiate that the mixture meets the same requirements as the individual component concentrates, they may be mixed together in the same storage vessel. Different types of foam concentrates, i.e., AFFF and Fluoroprotein Alcohol Resistant base should not be mixed under any circumstances. Quality insurance UNIVEX 3x6 Super as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Fire Classes Shape and colour Smell Density (20ºC) B Brown, clear liquid Characteristic, Protein 1,12 + 0,02 [g/ml] ph (concentrate, 20ºC/ IMO 3.5) Viscosity20ºC (IMO 3.4) ,0 [mm 2 /s] Sediment (IMO 3.3) 0,25 [%] Admixing ratio 3 [% Vol.] 6 [% Vol.] Expansion ratio (EN ) Drain Time 25% (20ºC, EN ) Drain Time 50% (20ºC, EN ) Expansion Freezing point 4:30 7:00 8:00 12:00 Baja, (Media) -15 [ºC] Pour point Recommended storage/ Usage temperature -12 [ºC] -10 a +60 [ºC] Ordering information UNIVEX 3x6 Super can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery). F516355C1 25 Litre can F516355D1 200 Litre drum F516355T Litre tote We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

15 HYDREX 3 FOAM CONCENTRATE Application HYDREX 3 is intended for use on Class B hydrocarbon fuels being classified as non-water miscible (so called non polar fuels) such as various crude oils, gasoline, diesel fuels, aviation fuels and hydrocarbons with low water solubility such as MTBE or Bio-fuels with a maximum content of 15% ethanol. HYDREX 3 is ideal for fast extinguishing of spills, Airport emergency response, Efficient Oil tank storage protection, fixed spray protection systems First class film forming fluoroprotein foam concentrate for 3% application on hydrocarbons fires HYDREX 3 is a Film Forming Fluoroprotein foam concentrate (FFFP) based on hydrolysed protein, fluorosurfactants blending, stabiliser salts and glycol ethers for use at 3% induction ratio. An intense research work including many laboratory and full scale fire tests routed to the outstanding sealing and extinguishing performance of HYDREX 3. Compare to other protein based foams HYDREX 3 produces an extremely fast spreading aqueous film, that acts as a vapour suppressor as well as a lubricant helping the foam blanket to rapidly cover all surfaces. The remarkable stability of the protein foam provides a long resistance to re-ignition. The result is a very effective agent with an outstanding performance in extinguishment and securing a fire scenario. Performance The foam produced by HYDREX 3 can be used either with air aspirating or non-aspirating type discharge devices. Sea water can be used without an increase in the application rate. A common application with (foam compatible) Dry chemical powders to achieve a maximum fire performance is possible. HYDREX 3 can be used by most conventional foam equipment such as: Balance pressure pump proportioning equipment Bladder tank and related proportioners Fixed and portable In-line venturi type inductor Fixed or handline nozzles or Monitors with fixed induction/ pick up tubes Approvals HYDREX 3 is approved or listed according to: UL-162 Latest edition EN 1568: 2000 Part. 3 GESIP 2L/m2/min (France) HYDREX 3 is measured against highest specifications and standards such as Underwriters Laboratories Standard UL 162, latest edition and EN 1568 part 3. On spills or large hydrocarbon fires, the foam immediately forms an aqueous film on the surface of the fuel. The spreading film covers the fuel to extinguish the fire and prevents hydrocarbon evaporation. This leads to a superior burn back resistance. The tough structure of the protein based foam enhances its stability on the fuel. The foam has a much higher fuel tolerance than other regular fluoroprotein foams. In case of injuries of the foam blanket it shows very good healing capabilities closing any defect very quickly. Additionally it provides a cooling function on the fuel by enclosed water and makes the water float on fuel surfaces in spite of it s usually higher density. We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

16 HYDREX 3 FOAM CONCENTRATE Storage and shelf life HYDREX 3 film forming fluoroprotein foam has an operational temperature range of 10 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or pails) within the temperature limits specified, or in equipment recommended by the manufacturer as part of the foam system, the shelf life of HYDREX 3 foam concentrate is generally about 10 years. If the product is frozen during storage or transportation, thawing will render the product completely usable. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin for storage recommendation. Safety and handling See our corresponding Material Safety data sheet. Compatibility There are no specifications or standards which address the subject of compatibility of different manufacturer s brands of film forming fluoroprotein foam concentrates. In an emergency or if the manufacturer has supporting test data to substantiate that the mixture meets the same requirements as the individual component concentrates, they may be mixed together in the same storage vessel. Different types of foam concentrates, i.e., AFFF and Film Forming FluoroProtein base should not be mixed under any circumstances. Quality insurance HYDREX 3 as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Typical properties HYDREX 3 FPPP 3% Fire Classes Shape and colour Smell Density (20ºC) A and B Brown, clear liquid Characteristic, Protein 1,16 + 0,02 [g/ml] ph (concentrate, 20ºC) Viscosity 20ºC ,0 [mm 2 /s] Sediment (EN 1568) 0,25 [%] Admixing ratio 3 [% Vol.] Expansion ratio (EN ) 7,0 Drain Time 25% (20ºC, EN ) Drain Time 50% (20ºC, EN ) Expansion Freezing Point Pour Point Recommended storage/ Usaged temperature Ordering information 2:30 4:00 Low, (Medium) -15 [ºC] -12 [ºC] -10 a +60 [ºC] HYDREX 3 can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F403325C1 25 Litre can F403325D1 200 Litre drum F403325T Litre tote F403325B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

17 HYDREX 6 FOAM CONCENTRATE Application HYDREX 6 is intended for use on Class B hydrocarbon fuels being classified as non-water miscible (so called non polar fuels) such as various crude oils, gasoline, diesel fuels, aviation fuels and hydrocarbons with low water solubility such as MTBE or Bio-fuels with a maximum content of 15% ethanol. HYDREX 6 is ideal for fast extinguishing of spills, Airport emergency response, Efficient Oil tank storage protection, fixed spray protection systems First class film forming fluoroprotein foam concentrate for 6% application on hydrocarbons fires HYDREX 6 is a Film Forming Fluoroprotein foam concentrate (FFFP) based on hydrolysed protein, fluorosurfactants blending, stabiliser salts and glycol ethers for use at 6% induction ratio. An intense research work including many laboratory and full scale fire tests routed to the outstanding sealing and extinguishing performance of HYDREX 6. Compare to other protein based foams HYDREX 6 produces an extremely fast spreading aqueous film, that acts as a vapour suppressor as well as a lubricant helping the foam blanket to rapidly cover all surfaces. The remarkable stability of the protein foam provides a long resistance to re-ignition. The result is a very effective agent with an outstanding performance in extinguishment and securing a fire scenario. Performance The foam produced by HYDREX 6 can be used either with air aspirating or non-aspirating type discharge devices. Sea water can be used without an increase in the application rate. A common application with (foam compatible) Dry chemical powders to achieve a maximum fire performance is possible. HYDREX 6 can be used by most conventional foam equipment such as: Balance pressure pump proportioning equipment Bladder tank and related proportioners Fixed and portable In-line venturi type inductor Fixed or handline nozzles or Monitors with fixed induction/ pick up tubes Approvals HYDREX 6 is approved or listed according to: EN 1568: 2000 Part. 3 UNI 9493 (Minister of Interior Italy) GESIP 2L/m2/min (France) HYDREX 6 is measured against highest specifications and standards such as EN 1568 part 3. On spills or large hydrocarbon fires, the foam immediately forms an aqueous film on the surface of the fuel. The spreading film covers the fuel to extinguish the fire and prevents hydrocarbon evaporation. This leads to a superior burn back resistance. The tough structure of the protein based foam enhances its stability on the fuel. The foam has a much higher fuel tolerance than other regular fluoroprotein foams. In case of injuries of the foam blanket it shows very good healing capabilities closing any defect very quickly. Additionally it provides a cooling function on the fuel by enclosed water and makes the water float on fuel surfaces in spite of it s usually higher density. We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

18 HYDREX 6 FOAM CONCENTRATE Storage and shelf life HYDREX 6 film forming fluoroprotein foam has an operational temperature range of 10 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or pails) within the temperature limits specified, or in equipment recommended by the manufacturer as part of the foam system, the shelf life of HYDREX 6 foam concentrate is generally about 10 years. If the product is frozen during storage or transportation, thawing will render the product completely usable. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin for storage recommendation. Safety and handling See our corresponding Material Safety data sheet. Compatibility There are no specifications or standards which address the subject of compatibility of different manufacturer s brands of film forming fluoroprotein foam concentrates. In an emergency or if the manufacturer has supporting test data to substantiate that the mixture meets the same requirements as the individual component concentrates, they may be mixed together in the same storage vessel. Different types of foam concentrates, i.e., AFFF and Film Forming FluoroProtein base should not be mixed under any circumstances. Quality insurance HYDREX 6 as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Typical properties HYDREX 6 FPPP 6% Fire Classes Shape and colour Smell Density (20ºC) A and B Brown, clear liquid Characteristic, Protein 1,16 + 0,02 [g/ml] ph (concentrate, 20ºC) Viscosity 20ºC ,0 [mm 2 /s] Sediment (EN 1568) 0,25 [%] Admixing ratio 6 [% Vol.] Expansion ratio (EN ) 7,0 Drain Time 25% (20ºC, EN ) Drain Time 50% (20ºC, EN ) Expansion Freezing Point Pour Point Recommended storage/ Usaged temperature Ordering information 2:30 4:00 Low, (Medium) -15 [ºC] -12 [ºC] -10 a +60 [ºC] HYDREX 6 can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F406326C1 25 Litre can F406326D1 200 Litre drum F406326T Litre tote F406326B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

19 PLUREX M FOAM CONCENTRATE Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Fixed or handline nozzles with fixed induction/pick up tubes Application Multi-purpose high expansion foam concentrate at 3% on hydrocarbons PLUREX M High Expansion Foam Concentrate is a synthetic based formulation comprised of hydrocarbon surfactants, solvents, and stabilizers for use with low, medium and high expansion foam generators. PLUREX M High Expansion Foam Concentrate can be used to produce foam with expansion ratios ranging from 50:1 to 1000:1 depending upon the type of generator and its operating pressure. When used with high expansion generators, recommended proportioning is at 3% (3 Litres PLUREX M concentrate with 97 litre water). Performance PLUREX M is measured against the latest specifications of the European Standard EN1568:2008 edition and marine IMO standard Msc 670. Testing on both standards has allowed rigorous testing with both fresh and salt water to meet the required performances. The performance of PLUREX M foam concentrate when used at High-Expansion will vary depending upon the performance characteristics of the equipment. Expansion ratios through high expansion generators typically are between 200:1 and 1000:1. For this reason, it is important for the proper design of a high expansion system that the PLUREX M foam Concentrate be specifically tested with the foam generators. Medium expansion foam generators typically deliver expansion ratios between 50:1 and 200:1. PLUREX M High Expansion Foam Concentrate is a tremendously flexible firefighting agent, used in fighting Class A, Class B, and LNG fires both indoors and outdoors. It is used only with air aspirating foam discharge devices except when used as a wetting agent on Class A fuels. PLUREX M High Expansion Foam Concentrate, when used with high expansion generators, is capable of totally flooding large rooms and enclosures allowing it to effectively extinguish horizontal and vertical (three-dimensional) fires. High expansion foam is also effective in reducing vapour concentrations downwind from unignited LNG and other hazardous low boiling point gaseous products such as ammonia spills. When used with medium expansion foam equipment, PLUREX M forms a foam blanket which prevents the release of fuel vapor and also provides additional cooling due to the higher water content. Medium expansion foam has benefits in outdoor applications because the foam is less affected by wind conditions. PLUREX M is ideal for fixed high expansion systems such as warehouse total flooding protection pump rooms, LNG pits, Fire Brigades daily applications, and aircraft hangars. The foam produced by PLUREX M extinguishes hydrocarbon fires best when applied gently by gentle application. Approvals PLUREX M is approved or listed according to: EN 1568:2008 Part. 2 IMO MSC Circ. 670 GOST-R (Russian) PLUREX M can be used by most conventional foam equipment such as: We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

20 PLUREX M FOAM CONCENTRATE Storage and shelf life PLUREX M has an operational temperature range of 8 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of PLUREX M concentrate is about years. The factors affecting shelf life and stability for PLUREX agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Eco-Toxicology and Disposal PLUREX M is environmentally safe and rapidly biodegradable. PLUREX M does not contain any fluorosurfactant and is therefore considered as a fluorine free foam. Safety and handling See our corresponding Material Safety data sheet. Inspection As with any fire extinguishing agent, PLUREX M should be inspected periodically. NFPA 11 or EN requires that foam concentrate samples be submitted to the manufacturer or other qualified laboratory for quality condition testing at least annually. Contact us for further information on annual inspection. For more specific information, please at : comercial@sabo-esp.com Quality insurance PLUREX M as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Typical properties PLUIREX M Multi-purpose Hi-ex foam 3% Fire Classes Shape and color Smell Density (20ºC) ph (concentrate, 20ºC) Viscosity 20ºC A and B Clear liquid, brown Characteristic, surfactant-alike 1,06 ± 0,02 [g/ml] 7.0 ± 1,0 7.0 ± 2,0 [mm 2 /s] Sediment (EN 1568) 0,1 [%] Admixing ratio Expansion 3 [% Vol.] Medium Exp As per standard EN 1568:1 Expansion Ratio (EN ) Drain Time 25%, (20 C) [min:s] Drain time 50%, (20 C) [min:s] Freezing Point Pour Point Recommended storage/ Usage temperature Ordering information High Exp EN 1568:2 IMO 670 Low Exp EN 1568:3 IMO :1 800:1 9:1 10:00 10:00 8:00 NA NA 15:00-13 [ºC] -10 [ºC] -8 a +60 [ºC] PLUREX M can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F203358C1 25 Litre drum F203358D1 200 Litre tote F203358T Litre drum F203358B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

21 PLUREX TF3 PLUREX TF3 ESPUMÓGENO Foam Concentrate Training Foam 3 or 6% PLUREX TF3 TRAINING Foam has been carefully formulated to allow firefighters the ability to conduct training with their own foam proportioning and generating equipment, while minimizing the effects of such training on the environment. It has foam expansion and drainage characteristics very similar to conventional 3% or 6% AFFF products. This is in contrast to other training foams on the market that simulate the expansion but have drain times far quicker than real firefighting foam. Using SABO Training Foam allows the user to determine both how much foam will be generated and how long the foam blanket will likely remain. The product has been formulated with surfactants and other chemicals commonly found in household products such as shampoo and dish washing detergents. It is safe to handle, is readily biodegradable and has low orders of aquatic toxicity. PLUREX TF3 Training Foam contains no fluorochemicals or fluorosurfactants. None of the components are reportable under current European regulations. Please check with local authority regarding use of this product and discharge to the environment. Application PLUREX TF3 Training Foam is not intended for live fire training or for actual firefighting operations. See your SABO FOAM professional if you require live fire training. It may be used with all conventional proportioning and discharge devices as well as specialized products such as Compressed Air Foam generating equipment or systems (CAFS). As stated earlier, the foam characteristics, in terms of expansion ratio and foam drainage rates, will be very similar to conventional 3% or 6% AFFF products. This allows users to conduct operational training with regard to equipment set up, application techniques, and foam containment. It also allows users to determine the foam quality and range of different types of discharge devices at different operating pressures. Compatibility PLUREX TF3 Training Foam SHOULD NOT be mixed, stored, or used with any other type of foam concentrate. Proportioning and application equipment should be flushed clean after use and before using different foam concentrate types. Typical Properties PLUREX TF3 Shape and color Density (25 C) Training Foam ph (concentrate, 25 C) Viscosity 20 C Light yellow to Amber liq ±0.015 [g/ml] 1.4 [mm²/s] Refractive index ± Admixing ratio Surface Surface Recommended storage/usage temperature 3 or 6 [% Vol.] 27 [dynes/cm] 28 [dynes/cm] 2 to +50 [ C] Storage and Shelf Life PLUREX TF3 Concentrate should be stored and used within a temperature range 2 C to 50 C. Storage in the original polyethylene shipping containers or other containers approved by SABO FOAM that minimize evaporation should result in a shelf life of 10 or more years. Containers should be kept tightly closed until use to both prevent evaporation and to minimize any contamination that might promote natural biodegradation of the product (PLUREX TF3 is readily biodegradable). If the product is frozen during storage or transportation, thawing will render the product completely useable. Mixing after freeze/thaw cycling is recommended. For more information on shelf life and materials of construction when using or storing training foam concentrate, ask your SABO FOAM supplier for related technical bulletins. Quality assurance PLUREX TF3 as with all SABO Products is subject to a very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

22 PLUREX TF3 PLUREX TF3 ESPUMÓGENO Foam Concentrate Environmental Information Aquatic Toxicity PLUREX TF3 Training Foam has been formulated to minimize the impact of AFFF discharges to an aquatic ecosystem. The levels of toxicity to both fish and lower organisms on the aquatic food chain are very low. Evaluations were conducted on the concentrate on both fingerling Rainbow Trout (a very sensitive fish species) and Daphnia magna (a water flea low on the aquatic food chain). Results of these tests are given as LC50 values (lethal concentration to 50% of the test population over a given time frame). It is common practice to conduct fish toxicity tests over a 96 hour exposure period and to conduct Daphnia tests over a 48 hour exposure period. The results of the testing are given below: 96 Hour LC50 Value for 1.78 g/l Fingerling Rainbow Trout (1,780 ppm) 48 Hour LC50 Value for 1.9 g/l Daphnia magna (1,900 ppm) The above data are for the concentrate. Since it is rare for the concentrate to be released directly to the environment, we can estimate the aquatic toxicity of the three percent or six percent working solution by using a dilution factor of 33 for 3% and 16.7 for 6%. 3% WORKING SOLUTION 96 Hour LC50 Value for 58.7 g/l Fingerling Rainbow Trout (58,700 ppm) 48 Hour LC50 Value 62.7 g/l for Daphnia magna (62,700 ppm) 6% WORKING SOLUTION 96 Hour LC50 Value for 29.7 g/l Fingerling Rainbow Trout (29,700 ppm) 48 Hour LC50 Value for 31.7 g/l Daphnia magna (31,700 ppm) The end result is that the working solutions of PLUREX TF3 can be considered practically non-toxic in aquatic ecosystems. Biodegradability Biodegradability of a chemical is a measure of how readily that chemical is broken down in the environment (typically by bacteria and fungi) into carbon dioxide and water or other components that are "generally regarded as safe" (GRAS). In determining the biodegradability potential of a chemical or mixture of chemicals, industries often times look at and compare two related analytical tests. The first test, Chemical Oxygen Demand (COD), is a measure of how much oxygen would be required to convert the chemicals to their most oxidized state. The second test, Biochemical Oxygen Demand (BOD), is a measure of how much oxygen will be used up by bacteria and other microorganisms over a given time period (usually 5 to 30 days). food source, which also consumes dissolved oxygen in the water as part of their metabolic process. The ratio of BOD to COD determines the theoretical biodegradability of a chemical or chemical mixture. If the BOD/ COD ratio is greater than 0.50 (50%), the chemical or chemical mixture is considered to be readily biodegradable. PLUREX TF3 Training Foam has BOD/COD ratios well above the 50% value. BOD and COD values for the concentrate and 3% and 6% working solutions are listed below. The subscript after the BOD represents the time frame in number of days over which the test was conducted. Longer times give the bacteria and other microorganisms more time to breakdown the chemicals and result in higher uses of the dissolved oxygen. PLUREX TF3 TRAINING FOAM CONCENTRATE Test Results Ratio (BOD/COD) COD 146,400 ppm BOD5 64,971 ppm BOD10 108,039 ppm BOD20 155,416 ppm % WORKING SOLUTION Test Results Ratio (BOD/COD) COD 8,300 ppm BOD5 4,611 ppm BOD10 5,623 ppm BOD20 11,756 ppm % WORKING SOLUTION Test Results Ratio (BOD/COD) COD 3,900 ppm BOD5 2,507 ppm BOD10 2,632 ppm BOD20 3,331 ppm Nutrient Loading PLUREX TF3 Training Foam contains no nitrogen or phosphorous compounds. As such, it will not contribute to nutrient loading in either an aquatic or terrestrial ecosystem. Disposal PLUREX TF3 contains no ingredients that are reportable under European regulations. Care should be taken to prevent discharges of foam solutions or the concentrate into waterways wherever possible. After checking with the proper authorities at the treatment plant, it is often permissible to discharge to a waste treatment works. It may be necessary to meter the discharge at a rate that is acceptable to the plant operators in order to prevent excessive foaming that could upset the normal operation of the plant. Ordering Information PLUREX TF3 Training Foam can be supplied in cans, drums or totes. Part No. F203368C1 Part No. F203368D1 Part No. F203368T1 25 Liter can 200 Liter drum 1000 Liter tote Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

23 HYDRAL 1 PLUS FOAM CONCENTRATE Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Fixed or handline nozzles with fixed induction/pick up tubes Application HYDRAL 1 PLUS is ideal for fixed foam system application on land base projects, foam water sprinkler systems, pumping stations, aircraft hangars and tank protection for both air aspirating and nonaspirating nozzles. Aqueous Film-Forming Foam (AFFF) concentrate at 1% for hydrocarbon fires HYDRAL 1 PLUS is an aqueous film forming foam concentrates (AFFF) based on fluorosurfactants, hydrocarbon tensides and glycol ethers for use at 1% induction ratio. AFFF is a synthetic concentrate comprised of detergent and fluorocarbon surfactant that form foam with the inherent ability to produce a vapour suppressing aqueous film on the surface of the hydrocarbon fuels. Performance The foam produced by HYDRAL 1 PLUS extinguishes hydrocarbon fires by either forceful or gentle application. HYDRAL 1 PLUS is compatible with all foam-compatible dry chemical extinguishing powders. Sea water can be used without an increase in the application rate. Approvals HYDRAL 1 PLUS is approved or listed according to: EN 1568: 2008 Part 1, Part 2 and Part 3 GOST-R (Russia) Meet EPA 2015 directive HYDRAL 1 PLUS is measured against the highest specifications and standards such as the European EN 1568 latest edition AFFF provides a rapid flame knock down on class B fires involving hydrocarbon fuels such as oil, petroleum and aviation fuels. On application, the foam spreads rapidly to form an aqueous film and foam blanket. The aqueous film suppresses the release of fuel vapours. The foam blanket effectively excludes oxygen from the fuel surface, extinguishing the fire and preventing re-ignition. Additionally it provides a cooling function on the fuel by enclosed water and makes the water float on fuel surfaces in spite of it s usually higher density. HYDRAL 1 PLUS can be used by most conventional foam equipment such as: We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

24 HYDRAL 1 PLUS FOAM CONCENTRATE Storage and shelf life HYDRAL 1 PLUS has an operational temperature range of -5 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. Typical properties HYDRAL 1 PLUS AFFF 1% Fire Classes A and B When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL 1 PLUS Concentrate is about years. Shape and color Smell Pale yellow clear liquid Characteristic, surfactant-alike The factors affecting shelf life and stability for HYDRAL agents are discussed in detail in our Technical Bulletin for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and handling See our corresponding Material Safety data sheet. Compatibility Tests have been performed with HYDRAL Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Refer to our Technical Bulletin 13B: addressing acceptable materials of construction for use with HYDRAL foam concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. Please first consult SABO for specific guidelines concerning materials of construction. For more information, please at : comercial@sabo-esp.com Quality insurance HYDRAL 1 PLUS as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Density (20ºC) 1,06 ± 0,02 [g/ml] ph (concentrate, 20ºC) 7.5 ± 0,5 Viscosity (20ºC) 6.0 ± 1,0 [mm 2 /s] Sediment (EN 1568) 0,1 [%] Admixing ratio 1 [% Vol.] Expansion Ratio (EN ) 6,0 Drain Time 25%, (20 C, EN ) Drain time 50%, (20 C, EN ) Expansion Pour Point Recommended storage/ Usaged temperature Ordering information 2:30 [min:s] 4:00 [min:s] Low, Medium -8 [ºC] -5 a +60 [ºC] HYDRAL 1 PLUS can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F101360C1 25 Litre drum F101360D1 200 Litre tote F101360T Litre tote F101360B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

25 HYDRAL T1 FOAM CONCENTRATE HYDRAL T1 can be used by most conventional foam equipment such as: Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Application Premium performance Aqueous Film-Forming Foam (AFFF) concentrate at 1% Freeze Protected to -29 C for hydrocarbon fires HYDRAL T1 is an aqueous film forming foam concentrates (AFFF) based on fluorosurfactants, hydrocarbon tensides and glycol ethers for use at 1% induction ratio. AFFF is a synthetic concentrate comprised of detergent and fluorocarbon surfactant that form foam with the inherent ability to produce a vapour suppressing aqueous film on the surface of the hydrocarbon fuels. Performance HYDRAL T1is measured against the highest specification and standards such as UL-162 standard latest edition. It also meets the 60 seconds extinguishing time required to pass the ICAO level B performance. It is also measured against the latest specifications of the European Standard EN 1568:2008 edition achieving the highest rating on Water immiscible fuel et low expansion (Part 3). HYDRAL T1 is ideal for sprinkler systems, process plants, pumping stations, aircraft hangars, tank protection and for non-air-aspirating discharge device like handline nozzles. The foam produced by HYDRAL T1 extinguishes hydrocarbon fires by either forceful or soft application. HYDRAL T1 is compatible with all foam-compatible dry chemical extinguishing powders. Sea water can be used without an increase in the application rate. Approvals HYDRAL T1 is approved and tested according to: EN-1568 : 2008 Part 3 UL-162 Complies with EPA 2015 Stewardship Program ICAO Level B AFFF provides a rapid flame knock down on class B fires involving hydrocarbon fuels such as oil, petroleum and aviation fuels. On application, the foam spreads rapidly to form an aqueous film and foam blanket. The aqueous film suppresses the release of fuel vapours. The foam blanket effectively excludes oxygen from the fuel surface, extinguishing the fire and preventing re-ignition. Additionally it provides a cooling function on the fuel by enclosed water and makes the water float on fuel surfaces in spite of it s usually higher density. We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

26 HYDRAL T1 FOAM CONCENTRATE Storage and shelf life HYDRAL T1 has an operational temperature range of 26 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL T1 Concentrate is about years. The factors affecting shelf life and stability for HYDRAL agents are discussed in detail in our Technical Bulletin for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and handling See our corresponding Material Safety data sheet. Compatibility Tests have been performed with HYDRAL Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Refer to our Technical Bulletin, addressing acceptable materials of construction for use with SABOFOAM concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. Please first consult SABO for specific guidelines concerning materials of construction. For more information, please at: comercial@sabo-esp.com Quality insurance HYDRAL T1 as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Typical properties HYDRAL T1 AFFF 1% Fire Classes Shape and color Smell Density (20ºC) A and B Pale yellow clear liquid Characteristic, surfactant-alike 1,05 ± 0,02 [g/ml] ph (concentrate, 20ºC) 7,5 ± 0,5 Viscosity 20ºC 4.0 ± 1,0 [mm 2 /s] Sediment (EN 1568) 0,1 [%] Admixing ratio 1 [% Vol.] Expansion Ratio (EN ) 7,0 Drain Time 25%, (20 C, EN ) Expansion Freezing Point Pour Point* Recommended storage/ Usage temperature 3:00 [min:s] Low, Medium -29 [ºC] -29 [ºC] -26 to +60 [ºC] *-18 C following UL-162 listing standard criteria. Ordering information HYDRAL T1 can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F101347C1 25 Litre drum F101347D1 200 Litre drum F101347T Litre tote F101347B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

27 HYDRAL 3C 3% AFFF ESPUMÓGENO SABOFOAM HYDRAL 3 C 3% AFFF (Aqueous Film-Forming Foam) Concentrate combines fluoro and hydrocarbon-surfactant technologies to provide effective fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for forceful or gentle firefighting applications at 3% solution in fresh, salt, or hard water. HYDRAL 3 C 3% AFFF foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel. n Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface. n The water content of the foam solution produces a cooling effect for additional fire suppression. TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density Yellow Liquid 1.02 ± 0.02 g/ml ph Refractive Index Viscosity* Spreading Coefficient minimum 2.0 ± 0.5 cst Sediment** 0.25 % Pour Point -5 C Freeze Point -8 C *Cannon-Fenske viscometer at 20 C **EN 1568:2008 protocol 3 dynes/cm minimum at 3% dilution The environmentally-mindful HYDRAL 3 C 3% AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. Environmental Protection Agency 2010/15 PFOA Stewardship Program. EC6 NVIRO-MINDED FORMULA Approvals, Listings and Standards The concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n EN 1568:2008 Parts 1,3 EN 1568 Application HYDRAL 3 C 3% AFFF Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels having appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL 3 C 3% AFFF Concentrate can be ideal for fixed, semifixed and emergency response firefighting applications such as: n Fuel or chemical storage tanks n Industrial chemical and petroleum processing facilities n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment n Aircraft hangars Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

28 Foaming Properties HYDRAL 3 C 3% AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at a 3% dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium. HYDRAL 3 C 3% AFFF Concentrate requires low energy to foam and the foam solution may be applied with aspirating and nonaspirating discharge devices. Aspirating discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Non-aspirating devices, such as handline water fog/stream nozzles or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 3% Expansion Ratio 8 25% Drain Time (min:sec) 2:30 50% Drain Time (min:sec) 4:00 **per EN , 2008 protocol Proportioning The recommended operational temperature range for HYDRAL 3 C 3% AFFF Concentrate is 0 C to 60 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes For immediate use: The concentrate may also be diluted with fresh or salt water to a 3% pre-mix solution. For delayed use: Consult Sabo Española Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only). Storage and Handling HYDRAL 3 C 3% AFFF Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the foam system equipment recommended by Sabo Española Technical Services. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of HYDRAL 3 C 3% AFFF Concentrate can be maximized through optimal storage conditions and proper handling. SABOFOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing HYDRAL 3 C 3% AFFF Concentrate with other foam concentrates for long-term storage is not recommended. Use in conjunction with comparable 3% AFFF products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted HYDRAL 3 C 3% AFFF Concentrate. Please contact Sabo Española Technical Services for recommendations and guidance regard-ing compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection HYDRAL 3 C 3% AFFF Concentrate should be inspected periodically in accordance with any of the following standards: NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to Sabo Española Foam Analytical Services or other qualified laboratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance HYDRAL 3 C 3% AFFF Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information HYDRAL 3 C 3% AFFF Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part Number Weight Volume F103369C1 25 L Pail kg m³ (60 lb) (1.16 ft³) F103369D1 200 L Drum kg m³ (481 lb) (8.74 ft³) F103369T L Tote 1100 kg m³ (2447 lb) (49.36 ft³) Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

29 HYDRAL T3 FOAM CONCENTRATE Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Fixed or handline nozzles with fixed induction/pick up tubes Application Premium performance Aqueous Film-Forming Foam (AFFF) concentrate at 3% for hydrocarbon fires HYDRAL T3 is a high quality aqueous film forming foam concentrates (AFFF) based on fluorosurfactants, hydrocarbon tensides and glycol ethers for use at 3% concentration. AFFF is a synthetic concentrate comprised of detergent and fluorocarbon surfactant that form foam with the inherent ability to produce a vapour suppressing aqueous film on the surface of the hydrocarbon fuels. Performance AFFF provides a rapid flame knock down on class B fires involving hydrocarbon fuels such as oil, petroleum and aviation fuels. HYDRAL T3 is ideal for sprinkler systems, process plants, pumping stations, aircraft hangars, tank protection and for non-air-aspirating hand line nozzles. The foam produced by HYDRAL T3 extinguishes hydrocarbon fires by either forceful or soft application. HYDRAL T3 is compatible with all foam-compatible dry chemical extinguishing powders. Sea water can be used without an increase in the application rate. Approvals HYDRAL T3 is approved and tested according to: EN-1568 : 2008 Part 1 and Part 3 IMO Msc. Circ MED B ICAO Level B On application, the foam spreads rapidly to form an aqueous film and foam blanket. The aqueous film suppresses the release of fuel vapours. The foam blanket effectively excludes oxygen from the fuel surface, extinguishing the fire and preventing re-ignition. Additionally it provides a cooling function on the fuel by enclosed water and makes the water float on fuel surfaces in spite of it s usually higher density. HYDRAL T3 can be used by most conventional foam equipment such as: We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

30 HYDRAL T3 FOAM CONCENTRATE Storage and shelf life HYDRAL T3 has an operational temperature range of 12 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL T3 Concentrate is about years. The factors affecting shelf life and stability for HYDRAL agents are discussed in detail in our Technical Bulletin for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and handling See our corresponding Material Safety data sheet. Compatibility Tests have been performed with HYDRAL Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Typical properties HYDRAL T3 AFFF 3% Fire Classes Shape and color Smell Density (20ºC) A and B Pale yellow clear liquid Characteristic, surfactant-alike 1,04 ± 0,02 [g/ml] ph (concentrate, 20ºC) 7,5 ± 0,5 Viscosity 20ºC 4.0 ± 1,0 [mm 2 /s] Sediment (EN 1568) 0,1 [%] Admixing ratio 3 [% Vol.] Expansion Ratio (EN ) 8,0 Drain Time 25%, (20 C, EN ) Drain time 50%, (20 C, EN ) Expansion Freezing Point 2:30 [min:s] 4:00 [min:s] Low, Medium -18 [ºC] Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Refer to our Technical Bulletin, addressing acceptable materials of construction for use with SABOFOAM concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. Pour Point Recommended storage/ Usage temperature Ordering information -15 [ºC] -12 to +60 [ºC] Please first consult SABO for specific guidelines concerning materials of construction. For more information, please at: comercial@sabo-esp.com Quality insurance HYDRAL T3 as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. HYDRAL T3 can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F103345C1 25 Litre drum F103345D1 200 Litre drum F103345T Litre tote F103345B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

31 HYDRAL 3S 3% AFFF ESPUMÓGENO SABOFOAM HYDRAL 3S 3% AFFF (Aqueous Film-Forming Foam) Concentrate combines fluoro- and hydrocarbonsurfactant technologies to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for firefighting applications at 3% solution in fresh, salt, or hard water. HYDRAL 3S foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel n Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface n The water content of the foam solution produces a cooling effect for additional fire suppression TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density ph Refractive Index Viscosity* Spreading Coefficient Pale Yellow Liquid 1.01 ± 0.02 g/ml minimum 2 ± 1 cst Sediment** 0.25 % Pour Point -2 C Freeze Point -4 C *Cannon-Fenske viscometer at 20 C **EN 1568:2008 protocol 3 dynes/cm minimum at 3% dilution The environmentally-mindful HYDRAL 3S 3% AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of EC6 the U.S. Environmental Protection Agency 2010/15 PFOA Stewardship Program. NVIRO-MINDED FORMULA Approvals, Listings and Standards HYDRAL 3S 3% AFFF Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n UL Standard 162, Foam Liquid Concentrates Application HYDRAL 3S 3% AFFF Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels having appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL 3S Concentrate can be ideal for fixed, semi-fixed and emergency response firefighting applications such as: n Fuel or chemical storage tanks n Industrial chemical and petroleum processing facilities n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment n Aircraft hangars Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

32 Foaming Properties HYDRAL 3S 3% AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at a 3% dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium. HYDRAL 3S Concentrate requires low energy to foam and the foam solution may be applied with aspirating and non-aspirating discharge devices. Aspirating discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Non-aspirating devices, such as handline water fog/stream nozzles or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 3% Expansion Ratio 7 25% Drain Time (min:sec) 2:30 50% Drain Time (min:sec) 4:30 **per EN , 2008 protocol Proportioning The recommended operational temperature range for HYDRAL 3S 3% AFFF Concentrate is 2 C to 49 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes For immediate use: The concentrate may also be diluted with fresh or salt water to a 3% pre-mix solution. For delayed use: Consult Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only). Storage and Handling HYDRAL 3S 3% AFFF Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the foam system equipment recommended in SABO Española Products Technical Bulletin Storage of Foam Concentrates. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of HYDRAL 3S Concentrate can be maximized through optimal storage conditions and proper handling. SABOFOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing HYDRAL 3S Concentrate with other foam concentrates for long-term storage is not recommended. Use in conjunction with comparable 3% AFFF products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted HYDRAL 3S 3% AFFF Concentrate. Please refer to SABO Española Products Technical Bulletin Acceptable Materials of Construction for recommendations and guidance regarding compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection HYDRAL 3S 3% AFFF Concentrate should be inspected periodically in accordance with any of the following standards: NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to SABO Española Products Foam Analytical Services or other qualified labo-ratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance HYDRAL 3S 3% AFFF Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information HYDRAL 3S 3% AFFF Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part Number Weight Volume F103374C1 25 L Pail kg m³ (60 lb) (1.16 ft³) F103374D1 200 L Drum kg m³ (481 lb) (8.74 ft³) F103374T L Tote 1100 kg m³ (2447 lb) (49.36 ft³) Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

33 HYDRAL 6C 6% AFFF ESPUMÓGENO SABOFOAM HYDRAL 6 C 6% AFFF (Aqueous Film-Forming Foam Concentrate) combines fluoro and hydrocarbon-surfactant technologies to provide effective fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for forceful or gentle firefighting applications at 6% solution in fresh, salt, or hard water. HYDRAL 6 C 6% AFFF foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel. n Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface. n The water content of the foam solution produces a cooling effect for additional fire suppression. TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density ph Refractive Index Viscosity* Spreading Coefficient Pale Yellow Liquid 1.02 ± 0.02 g/ml minimum 1.8 ± 0.5 cst Sediment** 0.25 % Pour Point -5 C Freeze Point -8 C *Cannon-Fenske viscometer at 20 C **EN 1568:2008 protocol 3 dynes/cm minimum at 6% dilution The environmentally-mindful HYDRAL 6 C 6% AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. Environmental Protection Agency 2010/15 PFOA Stewardship Program. EC6 NVIRO-MINDED FORMULA Approvals, Listings and Standards The concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n EN: 1568:2008 Parts 1,3 n ICAO Level B EN 1568 Application HYDRAL 6 C 6% AFFF Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels having appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL 6 C 6% AFFF Concentrate can be ideal for fixed, semifixed and emergency response firefighting applications such as: n Fuel or chemical storage tanks n Industrial chemical and petroleum processing facilities n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment n Aircraft hangars Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

34 Foaming Properties HYDRAL 6 C 6% AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at a 6% dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium. HYDRAL 6 C 6% AFFF Concentrate requires low energy to foam and the foam solution may be applied with aspirating and nonaspirating discharge devices. Aspirating discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Non-aspirating devices, such as handline water fog/stream nozzles or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 6% Expansion Ratio 8 25% Drain Time (min:sec) 2:30 50% Drain Time (min:sec) 4:00 **per EN , 2008 protocol Proportioning The recommended operational temperature range for HYDRAL 6 C 6% AFFF Concentrate is 0 C to 60 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes For immediate use: The concentrate may also be diluted with fresh or salt water to a 6% pre-mix solution. For delayed use: Consult Sabo Española Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only). Storage and Handling HYDRAL 6 C 6% AFFF Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the foam system equipment recommended by Sabo Espalola Technical Services. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of HYDRAL 6 C 6% AFFF Concentrate can be maximized through optimal storage conditions and proper handling. SABOFOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing HYDRAL 6 C 6% AFFF Concentrate with other foam concentrates for long-term storage is not recommended. Use in conjunction with comparable 6% AFFF products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted HYDRAL 6 C 6% AFFF Concentrate. Please contact Sabo EspañolaTechnical Services for recommendations and guidance regard-ing compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection HYDRAL 6 C 6% AFFF Concentrate should be inspected periodically in accordance with any of the following standards: NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to Sabo Española Foam Analytical Services or other qualified laboratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance HYDRAL 6 C 6% AFFF Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information HYDRAL 6 C 6% AFFF Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part Number Weight Volume F106371C2 20 L Pail 22.1 kg m³ (48.7 lb) (1.00 ft³) F106371C1 25 L Pail kg m³ (60 lb) (1.16 ft³) F106371D1 200 L Drum kg m³ (481 lb) (8.74 ft³) F106371T L Tote 1100 kg m³ (2447 lb) (49.36 ft³) Note: The converted values in this document are provided for dimensional reference only and do not reflect an actual measurement. SABOFOAM, HYDRAL and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

35 HYDRAL 6S 6% AFFF ESPUMÓGENO SABOFOAM HYDRAL 6S 6% AFFF (Aqueous Film-Forming Foam) Concentrate combines fluoro- and hydrocarbonsurfactant technologies to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for firefighting applications at 6% solution in fresh, salt, or hard water. HYDRAL 6S foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel n Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface n The water content of the foam solution produces a cooling effect for additional fire suppression TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density ph Refractive Index Viscosity* Spreading Coefficient Pale Yellow Liquid 1.01 ± 0.02 g/ml minimum 2 ± 1 cst Sediment** 0.25 % Pour Point -1 C Freeze Point -3 C *Cannon-Fenske viscometer at 20 C **EN 1568:2008 protocol 3 dynes/cm minimum at 6% dilution The environmentally-mindful HYDRAL 6S 6% AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. Environmental Protection EC6 Agency 2010/15 PFOA Stewardship Program. NVIRO-MINDED FORMULA Approvals, Listings and Standards HYDRAL 6S 6% AFFF Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n UL Standard 162, Foam Liquid Concentrates Application HYDRAL 6S 6% AFFF Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels having appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL 6S Concentrate can be ideal for fixed, semi-fixed and emergency response firefighting applications such as: n Fuel or chemical storage tanks n Industrial chemical and petroleum processing facilities n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment n Aircraft hangars Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

36 Foaming Properties HYDRAL 6S 6% AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at a 6% dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium. HYDRAL 6S Concentrate requires low energy to foam and the foam solution may be applied with aspirating and non-aspirating discharge devices. Aspirating discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Non-aspirating devices, such as handline water fog/stream nozzles or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 6% Expansion Ratio 7 25% Drain Time (min:sec) 2:30 50% Drain Time (min:sec) 4:30 **per EN , 2008 protocol Proportioning The recommended operational temperature range for HYDRAL 6S 6% AFFF Concentrate is 2 C to 49 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes For immediate use: The concentrate may also be diluted with fresh or salt water to a 6% pre-mix solution. For delayed use: Consult Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only). Storage and Handling HYDRAL 6S 6% AFFF Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the foam system equipment recommended in SABO Española Products Technical Bulletin Storage of Foam Concentrates. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of HYDRAL 6S Concentrate can be maximized through optimal storage conditions and proper handling. SABOFOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing HYDRAL 6S Concentrate with other foam concentrates for long-term storage is not recommended. Use in conjunction with comparable 6% AFFF products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted HYDRAL 6S 6% AFFF Concentrate. Please refer to SABO Española Products Technical Bulletin Acceptable Materials of Construction for recommendations and guidance regarding compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection HYDRAL 6S 6% AFFF Concentrate should be inspected periodically in accordance with any of the following standards: NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to SABO Española Products Foam Analytical Services or other qualified labo-ratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance HYDRAL 6S 6% AFFF Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information HYDRAL 6S 6% AFFF Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part Number Weight Volume F106376C2 20 L Pail 22.1 kg m³ (48.7 lb) (1.00 ft³) F106376C1 25 L Pail kg m³ (60 lb) (1.16 ft³) F106376D1 200 L Drum kg m³ (481 lb) (8.74 ft³) F106376T L Tote 1100 kg m³ (2447 lb) (49.36 ft³) For bulk orders consult Account Representative Safety Data Sheet (SDS) available at Note: The converted values in this document are provided for dimensional reference only and do not reflect actual measurement. SABOFOAM, HYDRAL and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

37 HYDRAL 6 (UL) FOAM CONCENTRATE Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Fixed or handline nozzles with fixed induction/pick up tubes Application HYDRAL 6 (UL) is ideal for sprinkler system application, process plants, pumping stations, aircraft hangars and tank protection and for non-air-aspirating handline nozzles. The foam produced by HYDRAL 6 (UL) extinguishes hydrocarbon fires by either forceful or soft application. Premium performance Aqueous Film-Forming Foam (AFFF) concentrate at 6% for hydrocarbon fires HYDRAL 6 (UL) is an aqueous film forming foam concentrates (AFFF) based on fluorosurfactants, hydrocarbon tensides and glycol ethers for use at 6% induction ratio. HYDRAL 6 (UL) is compatible with all foam-compatible dry chemical extinguishing powders. Sea water can be used without an increase in the application rate. Approvals HYDRAL 6 (UL) is approved or listed according to: UL-162 Listed AFFF is a synthetic concentrate comprised of detergent and fluorocarbon surfactant that form foam with the inherent ability to produce a vapour suppressing aqueous film on the surface of the hydrocarbon fuels. Performance HYDRAL 6 (UL) is measured against highest specifications and standards such as UL-162 standard. AFFF provides a rapid flame knock down on class B fires involving hydrocarbon fuels such as oil, petroleum and aviation fuels. On application, the foam spreads rapidly to form an aqueous film and foam blanket. The aqueous film suppresses the release of fuel vapour. The foam blanket effectively excludes oxygen from the fuel surface, extinguishing the fire and preventing re-ignition. Additionally it provides a cooling function on the fuel by enclosed water and makes the water float on fuel surfaces in spite of it s usually higher density. HYDRAL 6 (UL) can be used by most conventional foam equipment such as: Storage and shelf life HYDRAL 6 (UL) has an operational temperature range of 20 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL 6 (UL) Concentrate is about years. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

38 HYDRAL 6 (UL) FOAM CONCENTRATE Safety and handling See our corresponding Material Safety data sheet. Typical properties HYDRAL 6 (UL) AFFF 6% Fire Classes A and B Compatibility Shape and color Pale yellow clear liquid Tests have been performed with HYDRAL Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Refer to our Technical Bulletin, addressing acceptable materials of construction for use with SABOFOAM concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. Please first consult SABO for specific guidelines concerning materials of construction. For more information, please at: comercial@sabo-esp.com Quality insurance HYDRAL 6 (UL) as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Smell Density (20ºC) Characteristic, surfactant-alike 1,02 ± 0,02 [g/ml] ph (concentrate, 20ºC) 7,5 ± 0,5 Viscosity 20ºC 3.0 ± 1,0 [mm 2 /s] Sediment (EN 1568) 0,1 [%] Admixing ratio 6 [% Vol.] Expansion Ratio (EN ) 8,0 Drain Time 25%, (20 C, EN ) Drain time 50%, (20 C, EN ) Expansion Freezing Point Pour Point Recommended storage/ Usaged temperature 2:30 [min:s] 4:00 [min:s] Low, (Medium) -20 [ºC] -18 [ºC] -15 a +60 [ºC] Ordering information HYDRAL 6 (UL) can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F106309C1 25 Litre drum F106309D1 200 Litre drum F106309T Litre tote F106309B1 Bulk (Litre) We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

39 HYDRAL 1S 1% AFFF ESPUMÓGENO SABOFOAM HYDRAL 1S 1% AFFF (Aqueous Film-Forming Foam) Concentrate combines fluoro- and hydrocarbon-surfactant technologies to provide superior fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for firefighting applications at 1% solution in fresh, salt, or hard water. HYDRAL 1S foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel n Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface n The water content of the foam solution produces a cooling effect for additional fire suppression TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density ph Refractive Index Viscosity* Spreading Coefficient Pale Yellow Liquid 1.02 ± 0.02 g/ml minimum 5 ± 2 cst Sediment** 0.25 % Pour Point -4 C Freeze Point -6 C *Cannon-Fenske viscometer at 20 C **EN 1568:2008 protocol 3 dynes/cm minimum at 1% dilution The environmentally-mindful HYDRAL 1S 1% AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomerbased process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the EC6 U.S. Environmental Protection Agency 2010/15 PFOA Stewardship Program. NVIRO-MINDED FORMULA Approvals, Listings and Standards HYDRAL 1S 1% AFFF Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n UL Standard 162, Foam Liquid Concentrates Application HYDRAL 1S 1% AFFF Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels having appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL 1S Concentrate can be ideal for fixed, semi-fixed and emergency response firefighting applications such as: n Fuel or chemical storage tanks n Industrial chemical and petroleum processing facilities n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment n Aircraft hangars Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

40 Foaming Properties HYDRAL 1S 1% AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at a 1% dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium. HYDRAL 1S Concentrate requires low energy to foam and the foam solution may be applied with aspirating and non-aspirating discharge devices. Aspirating discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Non-aspirating devices, such as handline water fog/stream nozzles or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 1% Expansion Ratio 7 25% Drain Time (min:sec) 2:30 50% Drain Time (min:sec) 4:30 **per EN , 2008 protocol Proportioning The recommended operational temperature range for HYDRAL 1S 1% AFFF Concentrate is 2 C to 49 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes For immediate use: The concentrate may also be diluted with fresh or salt water to a 1% pre-mix solution. For delayed use: Consult Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only). Storage and Handling HYDRAL 1S 1% AFFF Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the foam system equipment recommended in SABO Española Products Technical Bulletin Storage of Foam Concentrates. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of HYDRAL 1S Concentrate can be maximized through optimal storage conditions and proper handling. SABOFOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing HYDRAL 1S Concentrate with other foam concentrates for long-term storage is not recommended. Use in conjunction with comparable 1% AFFF products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted HYDRAL 1S 1% AFFF Concentrate. Please refer to SABO Española Products Technical Bulletin Acceptable Materials of Construction for recommendations and guidance regarding compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection HYDRAL 1S 1% AFFF Concentrate should be inspected periodically in accordance with any of the following standards: NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to SABO Española Products Foam Analytical Services or other qualified laboratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance HYDRAL 1S 1% AFFF Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information HYDRAL 1S 1% AFFF Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part Number Weight Volume F101373C1 25 L Pail kg m³ (60 lb) (1.16 ft³) F101373D1 200 L Drum kg m³ (481 lb) (8.74 ft³) F101373T L Tote 1100 kg m³ (2447 lb) (49.36 ft³) Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

41 HYDRAL 3 CEX AFFF 3% ESPUMÓGENO SABOFOAM HYDRAL 3 CEX 3% AFFF (Aqueous Film-Forming Foam) Concentrate combines fluoro and hydrocarbon-surfactant technologies to provide cost-effective fire and vapor suppression for Class B hydrocarbon fuel fires. This synthetic foam concentrate is intended for firefighting applications at 3% solution in fresh, salt, or hard water. HYDRAL 3 CEX 3% AFFF foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel. n Liquid drains from the foam blanket and forms an aqueous film that suppresses fuel vapor and seals the fuel surface. n The water content of the foam solution produces a cooling effect for additional fire suppression. TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Density Yellow Liquid 1.02 ± 0.02 g/ml ph Refractive Index Viscosity* Spreading Coefficient minimum 2.0 ± 0.5 cst Sediment** 0.25 % Pour Point -5 C Freeze Point -8 C *Cannon-Fenske viscometer at 20 C **EN 1568:2008 protocol 3 dynes/cm minimum at 3% dilution The environmentally-mindful HYDRAL 3 CEX 3% AFFF Concentrate formulation contains short-chain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used in the concentrate meet the goals of the U.S. Environmental Protection Agency 2010/15 PFOA Stewardship EC6 Program. NVIRO-MINDED FORMULA Application HYDRAL 3 CEX 3% AFFF Concentrate is intended for use on Class B hydrocarbon fuel fires having low water solubility such as crude oils, gasolines, diesel fuels, and aviation fuels. It is not suitable for use on polar fuels having appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL 3 CEX 3% AFFF Concentrate can be ideal for fixed, semi-fixed and emergency response firefighting applications such as: n Fuel or chemical storage tanks n Industrial chemical and petroleum processing facilities n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment n Aircraft hangars Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

42 Foaming Properties HYDRAL 3 CEX 3% AFFF Concentrate may be effectively applied using most conventional foam discharge equipment at a 3% dilution with fresh, salt, or hard water. For optimum performance, water hardness should not exceed 500 ppm expressed as calcium and magnesium. HYDRAL 3 CEX 3% AFFF Concentrate requires low energy to foam and the foam solution may be applied with aspirating and non-aspirating discharge devices. Aspirating discharge devices typically produce expansion ratios from 3.5:1 to 10:1, depending on the type of device and the flow rate. Non-aspirating devices, such as handline water fog/stream nozzles or standard sprinkler heads, typically produce expansion ratios from 2:1 to 4:1. Medium-expansion discharge devices typically produce expansion ratios from 20:1 to 60:1. TYPICAL FOAM CHARACTERISTICS** (Fresh and Salt Water) Proportioning Rate 3% Expansion Ratio 8 25% Drain Time (min:sec) 2:30 50% Drain Time (min:sec) 4:00 **per EN , 2008 protocol Proportioning The recommended operational temperature range for HYDRAL 3 CEX 3% AFFF Concentrate is -2 C to 60 C. This foam concentrate can be correctly proportioned using most conventional, properly calibrated, in-line proportioning equipment such as: n Balanced and in-line balanced pressure pump proportioners n Balanced pressure bladder tanks and ratio flow controllers n Around-the-pump type proportioners n Fixed or portable in-line venturi type proportioners n Handline nozzles with fixed eductor/pick-up tubes For immediate use: The concentrate may also be diluted with fresh or salt water to a 3% pre-mix solution. For delayed use: Consult SABO Española Technical Services for guidance regarding suitability of a stored pre-mix solution (fresh water only). Storage and Handling HYDRAL 3 CEX 3% AFFF Concentrate should be stored in the original supplied package (HDPE totes, drums, or pails) or in the foam system equipment recommended by SABO Española Technical Services. The product should be maintained within the recommended temperature range. If the concentrate freezes during transport or storage, full product serviceability can be restored upon thaw with gentle re-mixing. Factors affecting the foam concentrate s long-term effectiveness include temperature exposure and cycling, storage container characteristics, air exposure, evaporation, dilution, and contamination. The effective life of HYDRAL 3 CEX 3% AFFF Concentrate can be maximized through optimal storage conditions and proper handling. SABOFOAM concentrates have demonstrated effective firefighting performance with contents stored in the original package under proper conditions for more than 10 years. Mixing HYDRAL 3 CEX 3% AFFF Concentrate with other foam concentrates for long-term storage is not recommended. Use in conjunction with comparable 3% AFFF products for immediate incident response is appropriate. Materials of Construction Compatibility To help avoid corrosion, galvanized pipe and fittings should never be used in contact with undiluted HYDRAL 3 CEX 3% AFFF Concentrate. Please contact SABO Española Services for recommendations and guidance regard-ing compatibility of foam concentrate with common materials of construction in the firefighting foam industry. Inspection HYDRAL 3 CEX 3% AFFF Concentrate should be inspected periodically in accordance with any of the following standards: NFPA 11, EN , or other relevant standard. A representative concentrate sample should be sent to SABO Española Foam Analytical Services or other qualified laboratory for quality analysis per the applicable standard. An annual inspection and sample analysis is typically sufficient, unless the product has been exposed to unusual conditions. Quality Assurance HYDRAL 3 CEX 3% AFFF Concentrate is subject to stringent quality controls throughout production, from incoming raw materials inspection to finished product testing, and is manufactured in an ISO 9001:2008 certified facility. Ordering Information HYDRAL 3 CEX 3% AFFF Concentrate is available in pails, drums, totes or bulk shipment. Shipping Container Part Number Weight Volume F103370C1 25 L Pail kg m³ (60 lb) (1.16 ft³) F103370D1 200 L Drum kg m³ (481 lb) (8.74 ft³) F103370T L Tote 1100 kg m³ (2447 lb) (49.36 ft³) Note: The converted values in this document are provided for dimensional reference only and do not reflect an actual measurement. SABOFOAM, HYDRAL and the product names listed in this material are marks and/or registered marks. Unauthorized use is strictly prohibited. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

43 HYDRAL AR 3-6 M FOAM CONCENTRATE Balance pressure pump proportioning equipment Bladder tank and related proportioners Around-the-pump proportioners Fixed and portable In-line venturi type inductors Fixed or handline nozzles with fixed induction/pick up tubes Application High performance Alcohol Resistant Aqueous Film-Forming Foam concentrate (AR-AFFF) for hydrocarbons applications at 3% and polar solvent fires at 6% HYDRAL AR 3-6 M is a high quality AR-AFFF synthetic foam concentrate based on surfactant, fluorosurfactant, polymer and fluoropolymer. The foam forms a film of water on hydrocarbons and in addition a polymer film on polar solvents. HYDRAL AR 3-6 M, alcohol resistant and aqueous film forming foam (AFFF) concentrate, is ideally suitable for extinguishing fires involving polar and/or foam-destroying liquids such as alcohols, esters, ketones, amines and also hydrocarbon fires involving petrol, fuel or oil. Performance HYDRAL AR 3-6 M is measured against the highest specifications and standards such as the European EN1568 latest edition 2008 and the new IMO Msc 1312 Marine standard tested on both Heptane, Acetone and IPA fuels. For fires involving foam miscible liquids we recommend a proportioning rate of 6% (v/v) of HYDRAL AR 3-6 M and a gentle indirect application of the foam, for example using foam deflectors so that the polymer film can become fully effective. HYDRAL AR 3-6 M is a non-newtonian fluid that is both pseudoplastic and thixotropic. Because of these properties, dynamic viscosity will decrease as shear increases. HYDRAL AR 3-6 M can be used with both air aspirating and nonaspirating discharge devices. To provide even greater fire protection capability, it may be used with dry chemical extinguishing agents disregard to the order of application. Due to the velocity of the dry chemical discharge, care must be taken not to submerge the polymeric membrane below the fuel surface. It has been tested using sea water and can be used without an increase in the application rate. When used with fresh, salt or hard water at the correct dilution with most conventional foam making equipment, the expansion will vary depending on the performance characteristics of the equipment. HYDRAL AR 3-6 M is used wherever it is essential to extinguish a fire rapidly to save human lives and to avoid high material losses. Examples for its use are Chemical plants, refineries, tank farms, ships, drilling rigs and any flammable liquid storage installations. Approvals HYDRAL AR 3-6 M is approved and listed according to: EN 1568:2008 Part 3 and Part 4 IMO MSC Circ HYDRAL AR 3-6 M is also especially suitable to extinguish rapidly large surface hydrocarbon fires; the foam has excellent flow properties at a reduced proportioning rate of 3% (v/v) and can be applied by forceful application direct onto the fuel surface. HYDRAL AR 3-6 M can be used by most conventional foam equipment such as: We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

44 HYDRAL AR 3-6 M FOAM CONCENTRATE Storage and shelf life HYDRAL AR 3-6 M has an operational temperature range of -8 C and +50 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. Typical properties HYDRAL AR 3-6 M Fire Classes AR-AFFF 3x6 A and B When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL AR 3-6 M Concentrate is about years. The factors affecting shelf life and stability for SABO FOAM agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and handling See our corresponding Material Safety data sheet. Compatibility Tests have been performed with HYDRAL Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Refer to our Technical Bulletin, addressing acceptable materials of construction for use with SABOFOAM concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. Please first consult SABO for specific guidelines concerning materials of construction. For more information, please at: comercial@sabo-esp.com Quality insurance HYDRAL AR 3-6 M as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Shape and color Smell Density (20ºC) Yellow clear liquid Characteristic, surfactantalike 1,04 ± 0,02 [g/ml] ph (concentrate, 20ºC) 7.5 ± 0,5 Viscosity 20ºC (*) 1100 ± 200 [Cps] Sediment (EN 1568) 0,1 [%] Admixing ratio Expansion Ratio (EN ) Drain Time 25%, (20 C, EN ) Drain time 50%, (20 C, EN ) Expansion Freezing Point Pour Point Recommended storage/ Usage temperature 3 [% Vol.] AFFF 6 [% Vol.] AR 7,0 9,0 5:00 [min:s] 9:00 [min:s] Low, Medium, (High) -13 [ºC] -10 [ºC] -8 a +60 [ºC] * Brookfield speed 60 rpm, spindle #3 Ordering information 10:00 [min:s] 15:00 [min:s] HYDRAL AR 3-6 M can be supplied in cans, drums, totes or Bulk (contact us for Bulk delivery details). F116364C1 25 Litre drum F116364D1 200 Litre drum F116364T Litre tote We reserved the right to improve our products within the tolerances being compliant to approvals without prior notice. Sabo Española

45 DATA SHEET HYDRAL AR (UL) Foam Concentrate High performance Alcohol resistant / aqueous film-forming foam (AR-AFFF) concentrate for hydrocarbons at 3% and polar solvent fires at 6% HYDRAL AR is a high quality synthetic foam concentrate based on surfactant, fluorosurfactant, polymer and fluoropolymer. The foam forms a film of water on hydrocarbons and in addition a polymer film on polar solvents. HYDRAL AR, alcohol resistant (AR) and aqueous film forming foam (AFFF) concentrate, is ideally suitable for extinguishing fires involving polar and/or foam-destroying liquids such as alcohols, esters, ketones, amines and also hydrocarbon fires involving petrol, fuel or oil. Performance HYDRAL AR is measured against highest specifications and standards such as Underwriters Laboratories Standard UL 162, latest edition. For fires involving foam-destroying liquids we recommend a proportioning rate of 6% (v/v) of HYDRAL AR and a gentle indirect application of the foam, for example using foam deflectors so that the polymer film can become fully effective. Application HYDRAL AR is used wherever it is essential to extinguish a fire rapidly to save human lives and to avoid high material losses. Examples for its use include chemical plants, refineries, tank farms, ships, drilling rigs and any flammable liquid storage installations. HYDRAL AR is also very effective when subsurface injection is used to fight tank fires. Due to its fluorinated surfactants content the foam absorbs only small quantities of hydrocarbons. HYDRAL AR is compatible with all foam-compatible dry chemical extinguishing powders. Sea water can be used without an increase in the application rate. Approvals HYDRAL AR is approved or listed according to: n UL-162 Listed Latest edition HYDRAL AR is especially suitable to extinguish rapidly large surface hydrocarbon fires; the foam has excellent flow properties at a proportioning rate of 3% (v/v) and can be applied direct to the fire surface. HYDRAL AR can be used by most conventional foam equipment such as: n Balance pressure pump proportioning equipment n Bladder tank and related proportioners n Around-the-pump proportioners n Fixed and portable In-line venturi type inductors n Fixed or handline nozzles with fixed induction/pick up tubes

46 Storage and shelf life HYDRAL AR has an operational temperature range of 12 C and +60 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL AR Concentrate is about years. The factors affecting shelf life and stability for SABOFOAM agents are discussed in detail in our Technical Bulletin for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and handling See our corresponding Material Safety data sheet. Materials of Constructions Compatibility Tests have been performed with HYDRAL Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Typical properties n HYDRAL AR n Fire Classes n Shape and colour n Smell n Density (20 C) AR-AFFF 3x6 A and B Pale yellow clear liquid Characteristic, surfactant-alike n ph (concentrate, 20 C) 7.5 ±0.5 n Viscosity 20 C (*) 1.06 ±0.02 [g/ml] 1800 ±200 [Cps] n Sediment (EN 1568) 0.1 [%] n Admixing ratio 3 [% Vol.] 6 [% Vol.] AFFF AR n Expansion Ratio (EN ) n Drain Time 25%, 7:00 15:00 (20 C, EN ) [min:s] n Drain Time 50%, 11:00 25:00 (20 C, EN ) [min:s] [min:s] n Expansion n Freezing Point n Pour Point n Recommended storage/ Usage temperature * Brookfield speed 60 rpm, spindle #3 Ordering information Low, Medium, (High) -18 [ C] -15 [ C] -12 to +60 [ C] HYDRAL AR can be supplied in cans, drums or totes. Refer to our Technical Bulletin, addressing acceptable materials of construction for use with SABOFOAM concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. Part No. n F116318C1 n F116318D1 n F116318T1 25 Litre drum 200 Litre drum 1000 Litre tote Quality Assurance HYDRAL AR as with all SABO Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed.

47 DATA SHEET HYDRAL AR 3-3M AFFF ESPUMÓGENO Multi-Application Alcohol resistant / aqueous film-forming foam (AR-AFFF) concentrate for unique concentration at 3% for both hydrocarbons and polar solvent fires. HYDRAL AR 3-3 M is a newly formulated fire fighting foam agent for multi-application using latest chemistry technology from special fluorochemical and hydrocarbon surfactants, a high molecular weight polymer, and solvents. It is intended for use as a 3% proportioned solution (3% = 3 litres of foam with 97 litres of water) on both polar solvent and hydrocarbon fuels in fresh, salt or hard water. Performance HYDRAL AR 3-3 M is measured against the highest specifications and standards such as the European EN1568 latest edition 2008, the new IMO MSC 1312 Marine standard and ICAO level B performance that allow this foam to be used against CAP 437 standard on helideck platforms onboard Chemical tankers using a unique foam agent all across. There are three fire extinguishing mechanisms in effect when using HYDRAL AR 3-3 M on either a conventional Class B hydrocarbon fuel such as gasoline, diesel fuel, etc., or a Class B polar solvent (water miscible fuel) such as methyl alcohol, acetone, etc. First, an aqueous film is formed in the case of a conventional hydrocarbon fuel, or a polymeric membrane in the case of a polar solvent fuel. This film or membrane forms a barrier to help prevent the release of fuel vapour. Second, regardless of the fuel type, a foam blanket is formed which excludes oxygen and from which drains the liquids that form the film or the polymeric membrane. Third, the water content of the foam produces a cooling effect. Application HYDRAL AR 3-3 M can be used by most conventional foam equipment such as: n Balance pressure pump proportioning equipment n Bladder tank and related proportioners n Fixed and portable In-line venturi type inductors n Fixed or handline nozzles with fixed induction/pick up Multi-Application Alcohol resistant / Aqueous film-forming AFFF-AR foam concentrate for unique concentration at 3% for both hydrocarbons and Polar solvent fires. HYDRAL AR 3-3 M is a non-newtonian fluid that is both pseudoplastic and thixotropic. Because of these properties, dynamic viscosity will decrease as shear increases. HYDRAL AR 3-3 M can be used with both air aspirating and non-aspirating discharge devices. To provide even greater fire protection capability, it may be used with dry chemical extinguishing agents disregard to the order of application. Due to the velocity of the dry chemical discharge, care must be taken not to submerge the polymeric membrane below the fuel surface. HYDRAL AR 3-3 M has been tested using sea water and can be used without an increase in the application rate. When used with fresh, salt or hard water at the correct dilution with most conventional foam making equipment, the expansion will vary depending on the performance characteristics of the equipment. Aspirating discharge devices produce expansion ratios of 5:1 to 10:1 depending primarily on type of aspirating device and flow rate. Non-aspirating devices such as handline water fog/stream nozzles or standard sprinkler heads give expansion ratios of 2:1 to 4:1. Medium expansion discharge devices produce typical expansion ratios between 20:1 to 60:1 depending primarily upon type of device and operating conditions. Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

48 Approvals The fire performance of HYDRAL AR 3-3 M is measured and listed according to: n EN1568 : 2008 Part 1, 2, 3 and 4 n IMO MSC Circ and MED B - D n ICAO Level B n GOST-R (Russia) n Meet EPA 2015 directive Storage and Shelf Life HYDRAL AR 3-3 M has an operational temperature range of 8 C and +50 C. Limited exposure to temperatures above +60 C does not affect the firefighting performance. When stored in the packaging supplied (polyethylene drums or cans) or in equipment recommended by the manufacturer as part of the foam system and within the temperature limits specified, the shelf life of HYDRAL AR 3-3 M Concentrate is about years. The factors affecting shelf life and stability for SABO agents are discussed in detail in our Technical Bulletin 11B for storage recommendation. If the product is frozen during storage or transportation, the concentrate should be thawed and used without any degeneration of the performance. Safety and Handling See our corresponding Material Safety data sheet. Quality Assurance HYDRAL AR 3-3 M as with all SABO ESPAÑOLA Products is subject to very stringent quality controls throughout all stages of production, from incoming raw to the complete product and is manufactured in an ISO 9001:2008 controlled facility. Quality assurance is therefore guaranteed. Typical Properties n HYDRAL AR 3-3 M n Fire Classes n Shape and colour n Smell n Density (20 C) AFFF-AR 3x3 A and B Pale yellow clear liquid Characteristic, surfactant-alike n ph (concentrate, 20 C) 7.5 ±0.5 n Viscosity 20 C (*) 1.05 ±0.02 [g/ml] 1800 ±200 [Cps] n Sediment (EN 1568) 0.1 [%] n Admixing ratio n Expansion Ratio (EN ) 8.0 n Drain Time 25%, (20 C, EN ) n Drain Time 50%, (20 C, EN ) n Expansion n Freezing Point n Pour Point n Recommended storage/ Usage temperature * Brookfield speed 60 rpm, spindle #3 Ordering Information 3 [% Vol.] 6:00 [min:s] 10:00 [min:s] Low, Medium, (High) -13 [ C] -10 [ C] -8 to +50 [ C] HYDRAL AR 3-3 M can be supplied in cans, drums or totes. Part No. Materials of Constructions Compatibility Tests have been performed with SABO Concentrate verifying its compatibility with standard carbon steel black pipe and pipe manufactured from various stainless steel or brass compounds. Alternative pipe, fittings, and valves may be used in some cases if acceptable to the customer and/or the authority having jurisdiction. Refer to our Technical Bulletin 13B, addressing acceptable materials of construction for use with SABO foam concentrates. Galvanized pipe and fittings must not be used in areas where undiluted concentrate will contact them since corrosion will result. n F113359C2 n F113359C1 n F113359D1 n F113359T1 20 Litre drum 25 Litre drum 200 Litre tote 1000 Litre tote Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española

49 HYDRAL AR 3-3 S+ ESPUMOGENO SABOFOAM HYDRAL AR 3-3 S+ AR-AFFF (Alcohol Resistant Aqueous Film-Forming Foam) Low Viscosity Concentrate combines fluoro- and hydrocarbon-surfactant technologies to provide superior fire and vapor suppression for Class B, polar solvent and hydrocarbon fuel fires. The low viscosity of this concentrate enables ease of proportioning in a wide range of equipment such as in-line eductors, balanced pressure systems, built-in systems aboard ARFF (Aircraft Rescue and Fire Fighting) and other emergency response vehicles. This synthetic foam concentrate is intended for forceful or gentle firefighting application at 3% solution for hydrocarbon fuels and gentle firefighting application at 3% solution for polar solvent fuels in fresh, salt, or hard water. HYDRAL AR 3-3 S+ foam solution utilizes three suppression mechanisms intended for rapid fire knockdown and superior burnback resistance: n The foam blanket blocks oxygen supply to the fuel. n Liquid drains from the foam blanket and forms either: An aqueous film on a hydrocarbon fire, or A polymeric membrane on a polar solvent fire which suppresses the vapor and seals the fuel surface n The water content of the foam solution produces a cooling effect for additional fire suppression. TYPICAL PHYSIOCHEMICAL PROPERTIES AT 20 C Appearance Yellow Gelled Liquid Density ph Refractive Index Viscosity* 1.03 ± 0.02 g/ml minimum 1000 ± 300 cps Sediment** 0.25% Spreading Coefficient Pour Point -12 C Freeze Point -14 C *Brookfield Viscometer Spindle #4, speed 60 rpm **EN 1568:2008 protocol 3 dynes/cm minimum at 3% dilution HYDRAL AR 3-3 S+ Concentrate is a non-newtonian fluid that is both pseudoplastic and thixotropic. Due to these properties, dynamic viscosity will decrease as shear increases. The environmentally-mindful HYDRAL AR 3-3 S+ AR-AFFF Concentrate formulation contains shortchain, C-6 fluorochemicals manufactured using a telomer-based process. The telomer process produces no PFOS, and these C-6 materials do not breakdown to yield PFOA. The fluorochemicals used EC6 in the concentrate meet the goals of the U.S. Environmental Protection Agency 2010/15 PFOA Stewardship Program. NVIRO-MINDED FORMULA Approvals, Listings, and Standards HYDRAL AR 3-3 S+ AR-AFFF Concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: n UL Standard 162, Foam Liquid Concentrate UL listed for use with an extensive array of proportioning and discharge equipment, including sprinklers as required by NFPA 16. n EN 1568:2008 Parts 3, 4 Application EN HYDRAL AR 3-3 S+ AR-AFFF Concentrate is intended for use on both types of Class B fires: hydrocarbon fuels with low water solubility, such as crude oils, gasolines, diesel fuels, and aviation fuels; and polar solvent fuels with appreciable water solubility, such as methyl and ethyl alcohol, acetone, and methyl ethyl ketone. The concentrate also has excellent wetting properties that can effectively combat Class A fires. It may also be used in conjunction with dry chemical agents to provide even greater fire suppression performance. HYDRAL AR 3-3 S+ Concentrate can be ideal for emergency response and semi-fixed firefighting applications such as: n Industrial chemical and petroleum processing facilities n Fuel or chemical storage tanks n Truck/rail loading and unloading facilities n Flammable liquid containment areas n Mobile equipment Reservamos el derecho de mejorar nuestros productos sin previo aviso, dentro de las tolerancias y en conformidad con las homologaciones de SABO Española