A Calder pump for every process application crankshafts are fitted to Triplex or Quintuplex, vertical or horizontal reciprocating plunger pumps.

Transcription

1 Features of our process pumps Certification Hazardous area rating to meet the Zone 1 or Zone 2 requirements of your site. Stainless-steel noise enclosures meet the most stringent noise requirements of current health and safety regulations. Discharge pulsation dampers that are compliant with BS D.I.N 3.1.b or D.I.N 3.1.c material certification where required. Compliance with the new Pressure Equipment Directive (PED). ATEX, NACE, A.P.I.674 and NORSOK compliance. Tank cleaning Process CIP systems in the food and pharmaceutical industry DNV Hazardous Area Certification. Heavy industrial manufacturing plants Fluid end materials in cast steel, ductile iron, aluminium bronze, 316L stainless steel and super Duplex stainless steel. Construction with precision-engineered components provides high-mechanical efficiency, Get in touch typically up to 90 percent. Suction and discharge valves are selected to suit the particular process application. High-pressure pump seals/packing can be To find out more about the solution that is right for your process needs, please get in touch: equipped with secondary leak detection and nitrogen flush. Hardwearing plungers are carefully selected to suit the pumped liquid. Relief valves, pressure bypass valves and pressure regulators provide essential safety protection. Instruments monitor and measure every aspect of the installation. Control systems range from DOL to variable speed inverter drives. Heavy-duty power ends and forged steel By telephone: +44 (0) By fax: +44 (0) By post: Calder Ltd, Gregory's Bank, Worcester, WR3 8AB, UK. By pumps@calder.co.uk Or visit our website: A Calder pump for every process application crankshafts are fitted to Triplex or Quintuplex, vertical or horizontal reciprocating plunger pumps. Some pumps incorporate a built-in gear reducer and others rely on external V-belt or gearbox drive. High pressure reciprocating plunger pumps

2 Features of our process pumps Certification Hazardous area rating to meet the Zone 1 or Zone 2 requirements of your site. Stainless-steel noise enclosures meet the most stringent noise requirements of current health and safety regulations. Discharge pulsation dampers that are compliant with BS D.I.N 3.1.b or D.I.N 3.1.c material certification where required. Compliance with the new Pressure Equipment Directive (PED). ATEX, NACE, A.P.I.674 and NORSOK compliance. Tank cleaning DNV Hazardous Area Certification. Process CIP systems in the food and pharmaceutical industry Fluid end materials in cast steel, ductile iron, aluminium bronze, 316L stainless steel and super Duplex stainless steel. Construction with precision-engineered components provides high-mechanical efficiency, typically up to 90 percent. Suction and discharge valves are selected to suit the particular process application. High-pressure pump seals/packing can be equipped with secondary leak detection and nitrogen flush. Hardwearing plungers are carefully selected to suit the pumped liquid. Relief valves, pressure bypass valves and pressure regulators provide essential safety protection. Instruments monitor and measure every aspect of the installation. Control systems range from DOL to variable speed inverter drives. Heavy-duty power ends and forged steel crankshafts are fitted to Triplex or Quintuplex, vertical or horizontal reciprocating plunger pumps. Some pumps incorporate a built-in gear reducer and others rely on external V-belt or gearbox drive.

3 A Calder pump for every process application Pumping a fluid under pressure calls for experience and technical competance of the pump manufacturer and the process expertise of the Offshore process client. If you choose less than the best, your system will soon develop endless problems, high maintenance costs, loss of productivity and perhaps even an emergency situation where people s lives are put at risk. De-ionised water This is where Calder s team of professionals excel. No matter what fluid or process is involved, we will devise a safe, high-pressure, process control solution that offers uncompromised quality and safety with unprecedented value for money. Offshore process Choose the best In keeping with the finest traditions of British engineering, Calder prides itself Calder highpressure pump applications No fluid is too challenging from heavy viscous slurries and volatile hydrocarbons to fluids that are corrosive, erosive, flammable or Drilling Unit Marine Riser Flexible Riser on delivering robust, high-quality, high-pressure process pumping equipment that is engineered with the latest corrosion-resistant materials and designed to give reliable and continuous duty under arduous conditions. Working together Pumping process fluids reliably and safely requires more than just a highpressure pump and driver. Working in partnership with you, the client, Calder gets involved in a project from the start and ensures that every aspect of the pumping process is engineered perfectly to provide you with a safe, fit for purpose solution that gives long-term reliability. include: Condensate and hydrocarbons Sea water and produced water injection Cuttings re-injection Methanol and glycol Water hydraulics Reverse osmosis Acidising Cuttings injection downright difficult, Calder s engineers are equal to them all. Whether the process Noise enclosure Around the clock Our involvement does not stop with the installation. Once we have installed and commissioned the system, we offer service contracts that give peace of mind to the most critical of processes. All in all, we fully expect that the Mud pumping and well kill Homogenising Oil transfer Pressure testing requirement is 5kW properly engineered, selected and installed reciprocating plunger pumping Reverse Osmosis or 1500kW, 50 bar or 3500 bar, low flow or high flow, diesel or electrically driven, Re-injection Well Head and BOP system that we can provide for you will surpass your expectations. Experience counts Calder has over 20 years of experience designing, innovating, manufacturing and installing reciprocating plunger pumps and systems for Calder will deliver a a wide range of process applications. Cuttings Injection, oil transfer, tailor-made solutionsthat meets and exceeds your Cement Slurry Injection Well Perforations Condensate spike, Butane propellant fill, Glycol dehydration, Methanol Injection, Reverse osmosis, High-pressure de-scaling, Power fluid pumping and water hydraulics are indicative of our application experience. Plant designers and operators select Calder high-pressure pumps for their high expectation. Cuttings injection Water management efficiency, proven durability, excellent reliability and low maintenance

4 Automotive Installation with noise hood Robot manipulation All over the world In fact, our client portfolio is our best reference over a thousand Calder pumps are operating worldwide, with 15-year-old systems working as well today as when they were first installed. From systems that automatically clean the paint shop in vehicle production lines to applications that pump liquids or gases for chemical companies such as ICI, we create permanent pumping solutions that are crucial to the manufacturing industry. Precision-engineered components Although most of the high pressure process systems devised by Calder are bespoke to our clients needs, they are constructed from standard yet precision-engineered components and tested to the very highest levels of performance and reliability. When you consider all of the features built into the Calder unit, especially the remarkable Hammelmann pump, you will quickly realise that no other high-pressure pump can come close to, let alone match, the innovation, energy-efficiency and dependability. Seal of approval Our pump control systems can be elaborate or straightforward, according to the needs of the process. From the complexity of a 350kW variable speed drive system, controlled remotely by a PLC for use in a Zone 1 hazardous environment, to the simplicity of a start-and-stop button, Calder have the expertise to engineer a control system that will meet your most demanding requirements. Calder are a fully accredited ISO and ISO company. All critical activities, such as design, engineering, assembly and testing are carried out in house. In addition, the majority of European, Norwegian, British and US general standards, certification requirements and regulations are regularly used and incorporated into our designs as and when specified and required by our clients. Pumping liquids and gases in manufacturing process, cleaning large scale industrial sites

5 Calder Ltd. Prescott Drive Warndon Worcester WR4 9NE United Kingdom web: Phone: Fax: (0) (0) A Calder pump for every process application High pressure reciprocating plunger pumps