SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification

Transcription

1 Page: 1 Compilation date: 27/07/2018 Revision date: 07/2021 Revision No: 8 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: Product code: SDSGBMOD 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of substance / mixture: CEPE_PW_04_v1: Professional painting, indoor brush/roller. CEPE_PW_03a_v1: Professional spray painting, indoor (Level 1). PROC10: Roller application or brushing PROC11: Non industrial spraying Consumer application of coatings. PC-PNT-2: Paints and coatings (including tinters for deco mixing systems) for decorative architectural use e.g. of interior and exterior surfaces of buildings and fixtures. Includes varnishes and wood stains Details of the supplier of the safety data sheet Company name: Farrow & Ball Uddens Estate Wimborne Dorset BH21 7NL UK Tel: + 44 (0) customer.services@farrow-ball.com 1.4. Emergency telephone number Emergency tel: + 44 (0) (Mon-Fri 08:30-17:30) (office hours only) Section 2: Hazards identification 2.1. Classification of the substance or mixture Classification under CLP: Most important adverse effects: -: EUH208 Contains 1,2-benzisothiazolin-3-one, a mixture of: 5-chloro-2-methyl-2h-isothiazol-3-one [ec no ] and 2-methyl-2h-isothiazol-3-one [ec no ]. May produce an allergic reaction Label elements Label elements: Hazard statements: EUH208: Contains 1,2-benzisothiazolin-3-one, a mixture of: 5-chloro-2-methyl-2hisothiazol-3-one [ec no ] and 2-methyl-2h-isothiazol-3-one [ec no ]. May produce an allergic reaction.

2 Precautionary statements: 2.3. Other hazards Other hazards: PBT: SAFETY DATA SHEET P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P103: Read label before use. This product is not identified as a PBT/vPvB substance. Page: 2 Section 3: Composition/information on ingredients 3.2. Mixtures Hazardous ingredients: TITANIUM DIOXIDE - REACH registered number(s): EINECS CAS PBT / WEL CLP Classification Percent Substance with a Community workplace exposure limit. CALCIUM/ MAGNESIUM CARBONATE % Substance with a Community workplace exposure limit % SILICON DIOXIDE Substance with a Community workplace exposure limit % Contains: The data quoted is for an untinted white base. Section 4: First aid measures 4.1. Description of first aid measures Skin contact: Eye contact: Ingestion: Inhalation: Wash immediately with plenty of soap and water. Bathe the eye with running water for 15 minutes. Wash out mouth with water Most important symptoms and effects, both acute and delayed Skin contact: Eye contact: Ingestion: Inhalation: Delayed / immediate effects: There may be mild irritation at the site of contact. There may be irritation and redness. There may be irritation of the throat. No symptoms Indication of any immediate medical attention and special treatment needed Immediate / special treatment:

3 Page: 3 Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers Special hazards arising from the substance or mixture Exposure hazards: 5.3. Advice for fire-fighters Advice for fire-fighters: Wear self-contained breathing apparatus. Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Refer to section 8 of SDS for personal protection details. Turn leaking containers leakside up to prevent the escape of liquid. Mark out the contaminated area with signs and prevent access to unauthorised personnel Environmental precautions Environmental precautions: Do not discharge into drains or rivers. Contain the spillage using bunding Methods and material for containment and cleaning up Clean-up procedures: Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method Reference to other sections Reference to other sections: Refer to section 8 of SDS. Section 7: Handling and storage 7.1. Precautions for safe handling Handling requirements: Do not use or store this product by hanging the container on a hook. Ensure good ventilation during application and drying. Do not get in eyes, on skin, or on clothing. See Section 8 for personal protection Conditions for safe storage, including any incompatibilities Storage conditions: Suitable packaging: Store in a cool, well ventilated area. Keep container tightly closed. The floor of the storage room must be impermeable to prevent the escape of liquids Specific end use(s) Specific end use(s): Section 8: Exposure controls/personal protection

4 Page: Control parameters Workplace exposure limits: DNEL/PNEC Values DNEL / PNEC 8.2. Exposure controls Engineering measures: The floor of the storage room must be impermeable to prevent the escape of liquids. CEPE_PW_03a_v1: 30% = general room ventilation (e.g. open windows). CEPE_PW_04_v1: 30% = general room ventilation (e.g. open windows). Respiratory protection: Respiratory protection not required. CEPE_PW_03A_v1: Not Required. CEPE_PW_04_v1: Not Required. Hand protection: Protective gloves. Nitrile rubber. (EN 374). Eye protection: Safety glasses. (EN 166). Skin protection: Protective clothing. Environmental: Prevent from entering in public sewers or the immediate environment. Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State: Emulsion Colour: Various Odour: Barely perceptible odour Evaporation rate: Slow Oxidising: Non-oxidising (by EC criteria) Solubility in water: Miscible Boiling point/range C: 100 Melting point/range C: Flammability limits %: lower: upper: Flash point C: >100 Part.coeff. n-octanol/water: Autoflammability C: Vapour pressure: Relative density: g/cc ph: VOC g/l: 4 g/l a (30 g/l) 9.2. Other information Other information: Section 10: Stability and reactivity Reactivity Reactivity: Stable under recommended transport or storage conditions Chemical stability Chemical stability: Stable under normal conditions.

5 Page: Possibility of hazardous reactions Hazardous reactions: Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below Conditions to avoid Conditions to avoid: Heat Incompatible materials Materials to avoid: Strong oxidising agents. Strong acids Hazardous decomposition products Haz. decomp. products: Section 11: Toxicological information Information on toxicological effects Excluded hazards for substance: Hazard Route Basis Acute toxicity (ac. tox. 4) - No hazard: calculated Acute toxicity (ac. tox. 3) - No hazard: calculated Acute toxicity (ac. tox. 2) - No hazard: calculated Acute toxicity (ac. tox. 1) - No hazard: calculated Skin corrosion/irritation - No hazard: calculated Serious eye damage/irritation - No hazard: calculated Respiratory/skin sensitisation - No hazard: calculated Germ cell mutagenicity - No hazard: calculated Carcinogenicity - No hazard: calculated Reproductive toxicity - No hazard: calculated STOT-single exposure - No hazard: calculated STOT-repeated exposure - No hazard: calculated Aspiration hazard - No hazard: calculated Symptoms / routes of exposure Skin contact: Eye contact: Ingestion: Inhalation: Delayed / immediate effects: Other information: There may be mild irritation at the site of contact. There may be irritation and redness. There may be irritation of the throat. No symptoms. Section 12: Ecological information

6 Page: Toxicity Ecotoxicity values: Persistence and degradability Persistence and degradability: Not biodegradable Bioaccumulative potential Bioaccumulative potential: Bioaccumulation potential Mobility in soil Mobility: Readily absorbed into soil Results of PBT and vpvb assessment PBT identification: This product is not identified as a PBT/vPvB substance Other adverse effects Other adverse effects: Section 13: Disposal considerations Waste treatment methods Disposal operations: Disposal should be in accordance with local, state or national legislation. Recovery operations: Recycling/reclamation of other inorganic materials. Waste code number: Disposal of packaging: Dispose of as normal industrial waste. Metal containers may be recycled. NB: The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. Section 14: Transport information Transport class: This product does not require a classification for transport. Section 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture Specific regulations: Global Chemical Inventory Status: One or more components of this product are not included in the following inventories. These may be polymers (of which monomers are included) and as such are exempt from registration: European Union EINECS - European Inventory of Existing Chemical Substances, Chemical Safety Assessment Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture by the supplier. Section 16: Other information

7 Page: 7 Other information Other information: Phrases used in s.2 and s.3: Legal disclaimer: This safety data sheet is prepared in accordance with Commission Regulation (EC) No 1272/2008. EUH208: Contains <name of sensitising substance>. May produce an allergic reaction. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any damage resulting from handling or from contact with the above product. [final page]