PERISTALTIC METERING PUMPS SINCE 1957

Transcription

1 PERISTALTIC METERING PUMPS SINCE 1957

2 WHY STENNER PERISTALTIC METERING PUMPS? RELIABLE & REPEATABLE INJECTION Stenner s self-priming pumps provide accurate dosing and output reproducibility within 2%. The pump head has a 3-point roller design that acts like a check valve to help prevent backflow, siphoning, overdosing and loss of prime. UNIQUE TUBE REPLACEMENT Stenner s QuickPro pump line and the Econ pump line each offer patented pump heads specifically designed for quick and easy tube replacement. LESS DOWN TIME The pumps are self-priming and do not lose prime from off-gassing solutions. De-gassing valves are not required. All pump components are easily accessible for timely servicing. PRACTICAL DESIGN Solutions are contained in the pump tube without exposure to air or the moving parts. The pump can run dry without damage and prime when the tank is re-filled. Check valves are not needed in the pump head.

3 MARKETS & APPLICATIONS Water Conditioning Disinfection, Oxidation, ph control Residential and Commercial Water Wells Commercial Pool & Aquatic Facilities Sanitation, ph Control Hotels, Sports Facilities, Condos Water & Wastewater Well & Surface Water Treatment, Odor & Stain Control, Wastewater Treatment City Water Facilities, Wastewater Treatment Plants Industrial Process Treatment of Process Water, Injection of Additives Manufacturing Plants, Processing Facilities Animal Health Water Line Sanitation, Acidification, Biofilm Reduction Livestock Farms, Hatcheries, Breeding Facilities, Private Water Supplies Water Treatment Legionella Prevention, Corrosion & Scale Control, Algae, ph Control Cooling Towers In Commercial & Industrial Buildings Irrigation & Horticulture Fertilizers, Line Cleaners, ph Adjustment Agricultural Farms, Nurseries, Turf Farms Metal Finishing Plating Bath Treatment, Wastewater ph Control Metal Processing Plants, Manufacturers Specialty Stenner refers to the specialty market as unique or niche applications such as the injection of additives for reefs, biotech research or photography. Food & Beverage Drain Line Maintenance, Drain Field Maintenance Commercial Kitchens, Convenience Stores Car Wash Water Reclamation, Injection of detergents, waxes, tire cleaners, rust inhibitors Car rental facilities, car & truck washes

4 QuickPro PUMPS Time tested, professionally approved Classic Series Electro-Mechanical The original Classic Series pump has been revised and enhanced since 1957 while keeping the well-engineered design intact. This versatile electro-mechanical pump is easy to service or to convert to another model and remains the most popular with installers. Common installations include wired to a well pump pressure switch, activated by a controller or activated by a water meter for proportional dosing. Single Head Adjustable 5%-100%, 2.5% increments or fixed output models Up to 40 gpd / 100 psi (151.4 lpd / 6.9 bar) Up to 85 gpd / 25 psi (321.8 lpd / 1.7 bar Offered as a Tank System Pump Cover Designed for Classic series single head adjustable pump, pump cover provides additional protection. Double Head Twice the output Adjustable output 5%-100%, 2.5% increments or fixed output models Up to 34 gpd / 100 psi (128.7 lpd / 6.9 bar) Up to 170 gpd / 25 psi (643.5 lpd / 1.7 bar)

5 PATENTED PUMP HEAD DESIGN QUICK TUBE REPLACEMENT ROBUST CONSTRUCTION QuickPro Pump Head Roller assembly collapses and expands. Variable speed or 1:128 injection SVP Series Variable Speed The SVP Series is a variable speed pump digitally adjusted to increase or decrease the motor speed. It is designed to respond to a 4-20mA input signal from water treatment controls to maintain proper water chemistry for industrial, water and wastewater applications. Digital keypad for automatic or manual control Adjustable dosages 5%-100%, 1% increments, non-scalable Up to 40 gpd / 100 psi (151.4 lpd / 6.9 bar) Up to 85 gpd / 25 psi (321.8 lpd / 1.7 bar) M128 Series 1:128 Medicator The M128 is a 1:128 medicator actuated by water flow from a dry contact water meter signal for treating livestock water with sanitizers, electrolytes, disinfectants or nutrients. Unlike water driven proportioners; the M128 is unaffected by scale or solids in the water source. Injects at a fixed rate of one ounce per gallon Adjustable pulse dial for contact rates of 1, 2, 4 or 10 pulses per gallon or 1 pulse per liter Standby setting can stop the pump, but still keep track of water consumption Offered as two models 3.5 oz per min. up to 100 psi (105 ml/min / 6.9 bar) 8.4 oz per min. up to 25 psi (249.7 ml/min / 1.7 bar) Meter System option, pre-assembled on a panel

6 ECON PUMPS Inject by flow or time Econ FP Flow Activated with Control Options The Econ FP pump is multi-functional and can accept a dry contact signal or a VAC/VDC signal from any control equipment that responds to flow. The pump is commonly installed to interface with a water meter, flow switch or water softener control valve. There are three operational modes to the run the pump at a set time or set speed. Three modes of operation: Seconds, Auxiliary, Flow Switch Three 120V models up to 80 psi: 4.5, 16 & 30 gpd (17.0, 60.6 & lpd / 5.5 bar) Meter System option, pre-assembled on a panel Econ T Programmable Timer The Econ T has an integral timer and is programmable offering the ability to set automatic dosing with flexibility for an injection schedule based on time. Biocide feed and the injection of enzymes or liquid solar blankets are a few of the practical uses. Schedule up to 24 separate on and off events within a 7 day period Each timer can be programmed in increments by hour and minute Up to 1.92 oz/min / 80 psi (56.94 ml/min / 5.5 bar) Up to 1.33 oz/min / 25 psi (39.40 ml/min / 1.7 bar) There s more than one way to mount an Econ Attach pump to the wall. 2. Attach to a Stenner tank or a wall. 3. Attach pump to the stand for display or mount to a wall. Mounting kit and stand sold separately.

7 PATENTED QUICK RELEASE PUMP HEAD EFFORTLESS TUBE REPLACEMENT COMPACT FOR LIGHT DUTY Quick Release Pump Head Cover slides on and off for quick access. Designed for the grower and the farm The Econ Integrator is for livestock water treatment and the Econ Stennicator is for 1:128 injection. Activated by a dry contact water meter, either pump can easily adapt to a pre-installed meter. Both pumps have two practical features; the internal relay and the standby setting. If utilizing a house controller, the internal relay repeats the meter signal to register water consumption. The standby setting will inactivate the pump for service without disconnecting the lead wires. If the pump is in standby, the signal to the controller will not be interrupted. Econ Integrator ph Control or Disinfection Designed for water treatment on livestock farms. Powered by electricity, the pump injects a fixed amount of chemical per water volume determined by a water meter pulse rate. Ideal for water line disinfection and ph control Additional water meter dedicated to chemical feed is not required Inject undiluted chemicals, no stock solutions to maintain 4.5, 16 & 30 gallons per day, up to 80 psi (17.0, 60.6 & lpd / 5.5 bar) Digital keypad 20:1 turndown, adjustable in 1% increments Econ Stennicator 1:128 Medicator The medicator injects product directly into the water line at a fixed ratio of 1:128; eliminating a water bypass that can restrict water flow to the drinker lines. Inject stock solutions or water solubles Activated by a water meter and 120V power Three pulse settings: 1 or 10 pulses per gallon or 1 pulse per liter 2.7 ounces per minute up to 80 psi (74 ml/min / 5.5 bar) A second Stennicator can be added for flow rates up to 5.4 gpm Animated video illustrates a Stennicator pump on a farm

8 METER SYSTEMS Accurate and repeatable doses Proportional Injection System The Proportional Injection System doses solution that is proportional to the system s flow rate based on water volume. The water meter sends a signal to the PCM which actuates the pump. The system is suited for constant pressure (variable speed) well pumps, poultry and livestock houses, irrigation, systems with demand based backup wells and any application with varying flow rates. Components include a Classic Fixed Output pump, Pump Control Module (PCM), 3/4" dry contact plastic water meter, Flow Indicator and filter Cabinet keeps cords and wires contained and accessible Dual system includes two pumps and two PCMs for twice the output Customize your own Proportional Feed System To customize your proportional feed installation, purchase the Classic single head fixed output pump, PCM, water meter and flow indicator separately. The water meter is offered in plastic or Eco Brass in a variety of sizes and pulse rates.

9 PROPORTIONAL INJECTION WATER METER ACTIVATED COMPONENTS PRE-MOUNTED TO A PANEL Panel and wall mount brackets included for ready-to-mount Time-saving pre-assembled systems Econ Meter System The Econ FP, Econ Stennicator and the Econ Integrator are offered as Meter Systems. Components include the pump and a 3/4" or 1" dry contact plastic water meter and flow indicator Cabinet keeps cords and wires contained and accessible The Stennicator meter system is also offered with two pumps M128 Meter System Primarily used for animal health, this convenient pre-assembled system will dose full strength or stock solutions to livestock water. The pump injects at a fixed rate of one ounce per gallon and is actuated by a signal from the dry contact water meter. Components include the M128 pump, and a 3/4" or 1" dry contact water meter with pulse rates of 1, 2, 4, 10 pulses per gallon or 1 pulse per liter.

10 MORE THAN PUMPS Inject by Water Volume Pre-Mounted Pump Stir It Up PCM The PCM is a time adjustable controller that powers the pump. A dry contact water meter sends a signal to the PCM which actuates the pump to deliver the desired dose based upon water volume. Four models and operating times: , , 1-10 & 2-20 (seconds) The pre-set time range is adjustable TANK SYSTEM Offered with the Classic Series single head fixed output or adjustable pump, all Econs or the M128. Offered as 7.5, 15 or 30-gallon, translucent white or UV gray Level indicators Tanks sold separately MIXER The Mixer delivers rapid and constant mixing for injecting solutions difficult to keep in suspension. Fits Stenner tanks, 7.5, 15 & 30-gallon Sealed mixing head Line guard not required For intermittent applications Low Lead or No Lead See It and Believe It Just Right for The Econ FP WATER METER The reed switch water meter provides a pulsing dry contact signal. Power not required Plastic: 3/4", 1" or 1 1/2" Eco Brass*: 2" * Certified with WQA under NSF/ANSI-372, low lead. FLOW INDICATOR The flow indicator is especially useful when using black suction & discharge tubing for a visual reference to confirm the pump is operating. FLOW SWITCH The two wire, paddle style flow switch has glass fiber reinforced plastic construction and is available for PVC or copper pipe.

11 OVER 55 years of pump manufacturing MANUFACTURING SINCE day lead time 98% on-time delivery The Stenner Pump Company has been manufacturing peristaltic metering pumps since What is important to you, has to be important to us and according to our customers it is performance. Reliable performance means a dependable pump and a dependable pump reduces service time and expense. A total commitment to customer satisfaction is the philosophy that remains as the product line grows.

12 STENNER PUMP COMPANY 3174 DeSalvo Road Jacksonville, Florida USA Phone US Toll Free Fax Stenner Pump Company All Rights Reserved This information is not intended for specific application purposes. Stenner Pump Company reserves the right to make changes to prices, products, and specifications at any time without prior notice. SB 0614