Technical Application Guide for UP-SHINE LED Spotlight

Transcription

1 Technical Application Guide for UP-SHINE LED Spotlight UP-SP43MR16-5W

2 Introduction LED Spotlight adopts high lumen LED, with high brightness and slight light decay. Excellent heat dissipation with aluminum heatsink and good color rendering index up to 8. MR16, GU1 base available, easy installation, with direct replacement of the traditional halogen. Up to 7% energy saving compared to halogen lamp Long lifetime of 4, hours 36 beam angle Standard 5mm diameter CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas Application:It is widely used in residential lighting, such as bedroom, living room dining room, kitchen etc. Also commercial lighting, like hotel, restaurant, bar, shops etc. Certificates

3 Product Information 45 Ø5 Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimension UP-SP43MR16-5W AC/DC12V 5W K 4h 8 Ø5*45mm UP-SP43MR16-5W AC/DC12V 5W K 4h 8 Ø5*45mm UP-SP43MR16-5W AC/DC12V 5W K 4h 8 Ø5*45mm UP-SP43MR16-5W AC/DC12V 5W K 4h 8 Ø5*45mm Driver data Sheet Driver data Non-dim Input rated Voltage Frequency Input Voltage AC/DC 12V 5/6Hz AC/DC 12V Efficiency 76% Total load Wattage 5W±.5W Power Factor 1 Rated input current Full load output Voltage Rated output current Output current range.8a DC5-8V 65mA 65mA±5% Power tolerance ±5% Current output tolerance ±5% Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 5W Ⅲ IP2-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 3K 4K.8 Max=5665 [1.=2] 1.82 SDCM F3K.8 Max=8312 [1.=2] 5.12SDCM F4K x=.4365 y= x=.4436 y= K 57K Max=5763 [1.=2].8 Max=837 [1.=2] 2.2SDCM F5K SDCM F57K x=.3847 y= x=.3478 y= Photometric Diagram 3K 4K Flux out: 147 lm Flux out: lm / MH=1m C/18 C9/ / MH=1m C/18 C9/ ft 21.96, 34.94fc 1m 24.1, 383.2lx 6.562ft 5.489, 8.734fc 2m 59.8, 94.2lx 2.352ft 71.7cm 4.75ft cm ft 2.44, 3.882fc 3m 26.26, 41.78lx 7.57ft cm ft 1.372, 2.184fc 4m 14.77, 23.5lx 9.132ft cm ft.8783, 1.379fc 5m 9.453, 15.4lx 11.41ft cm AVERAGE BEAM ANGLE(5%): 34.2 DEG Height Eavg, Emax Angle: 33.29deg Diameter AVERAGE BEAM ANGLE(5%): 35.9 DEG Height Eavg, Emax Angle: 35.45deg Diameter 5K 57K Flux out: 18.3 lm Flux out: lm / MH=1m C/18 C9/ ft 24.18, 37.79fc 1m 26.2, 46.7lx 6.562ft 6.44, 9.447fc 2m 65.6, 11.7lx 2.376ft 72.41cm 4.752ft cm / MH=1m C/18 C9/ ft 2.686, 4.199fc 3m 28.91, 45.19lx 7.127ft cm ft 1.511, 2.362fc 4m 16.26, 25.42lx 9.53ft cm ft.967, 1.511fc 5m 1.41, 16.27lx 11.88ft 362.7cm AVERAGE BEAM ANGLE(5%): 34.8 DEG Height Eavg, Emax Angle: 34.81deg Diameter AVERAGE BEAM ANGLE(5%): 34.9 DEG Height Eavg, Emax Angle: 34.3deg Diameter

5 Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O 14-6 O O -3 O 7 3 O O AVERAGE BEAM ANGLE (5%): 34.9 DEG C/18, 35.6 deg C3/21, 35. deg C6/24, 34.5 deg C9/27, 34.4 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C Temperature ( o C) :22:19 9:34:17 9:46:17 9:58:17 1:1:17 1:22:17 1:34:17 1:46:17 1:58:17 11:1:17 11:22:17 11:34:17 11:46:17 11:58:17 12:1:17 12:22:17 12:34:17 12:46:17 12:58:17 13:1:17 13:22:17 Time IC Capactior MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.

6 Installation 1 2 Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 29*29* CTNS Q'TY(PCS) VOLUME(CBM) 2'' standard container '' standard container Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China