OHM SYSTEM SP. Z O.O. ul. Wasilkowska 37/ Białystok ABOUT US CONTACT:

Transcription

1 electrical and E/I&C ABOUT US OHM System sp. z o. o. was established in June Despite being a young company, we are a strong team of engineers and specialists with extensive experience acquired throughout many years of work in other companies. Basing on our experience we provide comprehensive services in the field of industrial and electrical systems, including: design (of the electrical and E/I&C parts), performance, starting from simple electrical installations, to advanced industrial automatic systems - through orders, prefabrication of switch and control cabinets, preparing the plant in terms of installation, plant works and connections, to electrical and non-electrical measurements - E/I&C, software DCS, advanced and simple PLCs, SCADA systems of various manufacturers, commissioning and supervising of various technological objects. Our experience is not limited to power engineering (both electrical and heating sectors), but it also covers chemical and manufacturing technologies.

2 OFFER AND SCOPE OF ACTIVITY The services offered by OHM System sp. z o.o. include comprehensive execution: from the design of electrical systems and E/I&C, through prefabrication of control cabinets and switchgears, implementation, PLCs and SCADA systems to commissioning and supervising the start-up of various technical installations, i.e: investment consulting regarding the technical aspects in the fields of: electrical and industrial systems; designing electrical, power, E/I&C and industrial installations; prefabricating control cabinets, power and lighting switchgears; installation and commissioning of power supply, lighting, and E/I&C systems; programming systems and visualisation of technological processes; commissioning and supervising the start-up of complete installations; training the personnel and on-going contact with clients.

3 EXPERIENCE "The aim of science is not to open the door to infinite wisdom, but to set a limit to infinite error." B. Brecht We are not just another engineering company. We are passionate. Our goal is not to repeat old patterns. It is knowledge and development, improvement of our skills in order to open the door to new possibilities - of gain as well as both for ourselves and our clients. We think economically. We simply think. We are attempting to answer not only the question "How to do it". We seek the answer to the question "why". We do not look just for solutions. We look for causes. We are constantly learning - we do not stand idle. What does the term engineer mean to us? The foundation of the art of engineering is not the specific knowledge itself. The art of engineering is the ability to combine knowledge from various fields and industries in such a way that they form a single whole - because in the physical world, the nature and the universe, they are one. The ability and will to strive to reach this unity is the basis of the art of engineering.

4 There is no light without electricity. There is no electricity without source. There is no source without drive. There is no drive without driving force. There is no driving force without medium. There is no medium without technology. ELECTRICAL POWER MECHANICAL POWER TECHNOLOGY THERE IS NO EFFECT WITHOUT COOPERATION. We combine various types of knowledge, without grading their importance. We shun ignorance. If we assume that only after proper combination elements will create a single whole, that our mission is to find a way to unify everything so that it can work together, Then - we are always able to achieve the intended result. WE ARE ENGINEERS

5 PROFESSIONAL EXPERIENCE As part of our extensive experience we completed projects not only in terms of single aspects, but also comprehensively. Our projects include: a) Municipal Heat Supply Companies and heat plants; b) power and CHP plants (as part of modernising generating units, but also for carburizing installations, biomass supply installations, heat generating units, auxiliary, technical steam and heat accumulation systems); c) sewage treatment plants; d) chemical processing facilities; e) waste incineration plants; f) small and large production plants; g) water treatment plants, pumping stations, pressure boosting stations and other small technological plants.

6 REALISATION EXAMPLES Our employees realisations provide such projects as for example: MPEC Sokółka (heating plant, K3 boiler GE FANUC PLC controller, SCADA system WONDERWARE InTouch), Białystok Power Plant (Honeywell Experion PKS DCS System BC50 power units nr 1,2,3 boiler and turbine parts, fuel distribution, water treatment units, main heat distribution, ash removal installation, deslagging, heat accumulation unit and other) Sulfur acid production facility for ZAO POLUS in Jeruda, Syberia (PLC Siemens, SCADA WinCC Siemens, electrical works and measurements for Biprokwas Kraków sp. z o. o.), Urea plant unit Karbamida 3 for OAO Grodno AZOT, Belarus (Honeywell Experion PKS DCS System, for Honeywell Czech Rep., cooperation with Chemoprojekt, a.s.) Steam and hot air production plant in Karsy for Mo-Bruk S.A. - waste incineration plant (PLC Schneider PREMIUM and Modicon M340, SCADA system Asix.Evo by ASKOM - comprehensive electrical and E/I&C project, design and modernisation of electrical and E/I&C systems including measurement, programming and creating a SCADA system with commissioning and operation)

7 SKSM Minerals Mine in Suwałki - of the entire facility (ET200S Siemens controllers, SCADA system - ASIX by ASKOM, comprehensive handling with commissioning), sheet metal cutting line for AMINA Andrzej Krawczuk - project in Grodno, Belarus (PLC WAGO Controller + control panel - concept, measurement, execution in the scope of electrical and E/I&C systems, commissioning) Water treatment plant and pumping stations in Baciuty, pressure boosting station in the Białystok CHP plant (Siemens S PLC) 450 MWe gas and steam unit in Włocławek supervising the commissioning in the aspect of E/I&C for Energotherm Consulting sp. z o.o. MONDI Świecie programming and commissioning of the recovery boiler evaporator based on the Honeywell Experion PKS DCS system for Honeywell Polska sp. z o. o. Stalowa Wola S.A. CHP plant - inventory of the DCS system and part of E/I&C for the 450 MWe gas and steam unit

8 COMPANY STRUCTURE MANAGEMENT President of the Board Tomasz Sołbut, MSc Eng. tel.: (+48) OTHER Accounting: Office and secretary Justyna Jakubczyk, MA Automation Department Tomasz Sołbut, MSc Eng. Jan Karpiuk Radosław Krzysztof Cebula, MSc Eng. Software department Adam Sołbut, PhD Eng.

9 OUR GOALS We want to implement our own innovative solutions which become the integral part of our projects. Both when working on the projects of our clients as well as on our own. The side-effect of passion is the constant strife for perfection. We want to provide our clients with a package of development possibilities, through on-going cooperation and technical, staying in touch and improving the implemented solutions, customised to the needs of the client - in technical and economic terms. We think comprehensively. We do not limit ourself to our own capabilities, we look at every project with our client's goal in mind. We want to act as binding agent for knowledge from various fields. Because without the remaining pieces of the puzzle the desired effect cannot be achieved. We understand the importance of technology, laws of physics, energy, mechanics... And the importance of the human factor. Our main goal is therefore to understand the needs of our client and help them achieve the desired result. Our goal is... SUCCESS.

10 OUR CAPABILITIES 1. INDUSTRIAL AUTOMATION selecting automatic devices and systems for the given technological installation projects; technical and price list consulting performing electrical, and E/I&C projects; prefabrication of power, control and E/I&C cabinets and switchgear; installing electrical, control and E/I&C switchgear; PLC programming (including DCS systems) and visualisation of industrial processes for PCs and operator panels; comprehensive technological installation commissioning including industrial supervision; We program controllers and DCS systems by: Siemens, GE Fanuc, Schneider, WAGO, Bekhoff, Honeywell, Yokogawa. SCADA systems: Wonderware InTouch, Simmatic WinCC, ASKOM Asix.Evo. We also perform calibration and certification of some measurement devices, as well as electrical and non-electrical control measurements.

11 OUR CAPABILITIES 2. SOFTWARE Our offer includes a wide range of software and hardware of various interfaces and protocols from various software environments, with the use of a broad selection of software tools, including: Hardware interfaces: RS232/RS485; Communication protocols Modbus ASCII, Modbus RTU, Modbus TCP/IP, TCP/IP (programming web applications) and others, if detailed technical specification is provided; in the.net environments, upon special request also in the Linux environment; languages: C, C++, C#, for web applications also ASP.NET, PHP and Java; Integrating the applications with databases and programming in distributed systems (Web services, RPC,.NET Remoting); The completion time for individual projects always depends on the requirements of the Ordering party and the specific features of the given application.

12 3. PROJECTS OUR CAPABILITIES We offer design and consultation services for power supply systems, power installations and grids for the public, commercial and industrial sectors. Scope of services: designing complete facilities in terms of electrical and control systems, measurements, power supply and protective measures for industrial installations; designing complete internal and external electrical installations, meeting the requirements of applicable standards and customised to the specific demands of Clients; electrical projects without limitations (from interior installations to power systems - transformer stations, LV, MV and HV overhead and cable lines); low current installation projects - telecom technology (structural network, DSO, SAP, KD, CCTV, alarm systems, KNX, BMS; technical consulting consisting in assessing the condition of existing installations, modernisation proposals or designing new electrical installations; designer supervision over the performed project.

13 EXAMPLE REFFERENCES

14 EXAMPLE REFFERENCES

15 EXAMPLE REFFERENCES

16 EXAMPLE REFFERENCES

17 EXAMPLE REFFERENCES

18 EXAMPLE REFFERENCES

19 EXAMPLE REFFERENCES

20 EXAMPLE REFFERENCES