OJSC Turboatom. OJSC "Turboatom" an enterprise which has the International Certificate of Quality Management System ISO 9001:2008

Transcription

1 General information about enterprise: Date of establishment: 1934 Ground area: 50.5 hec. Floor area of building: thous. m 2 Number of personnel: 5257 persons 1

2 OJSC "Turboatom" an enterprise which has the International Certificate of Quality Management System ISO 9001:2008 Turbines made by OJSC "Turboatom" successfully operates at Power Plants of 45 countries of Europe, Asia, America and Africa 2

3 The new-generation 325 MW steam turbine is designed to substitute physically outdated 300 MW turbines, and also to be installed at the new units under construction. New-generation 325 MW steam turbine Assembly of a 325 MW steam turbine on the test bench Steam turbine К in the turbine hall of Aksu TPP, Kazakhstan 3

4 560 (600) MW steam turbine Longitudinal section of 560 MW turbine К According to the power engineering development programmes in Russia and Kazakhstan till 2015 the MW units will be the basis of power engineering development in the Ural and Western Siberia regions. Turbine К being subject to be modernized in the turbine hall of Ekibastuzskaya TPP 4

5 Large capacity turbines for nuclear power engineering Over more than 50 years of existence of turbine manufacture for NPP OJSC "Turboatom" have designed and manufactured 17 turbine types for nuclear power plants equipped with various reactor types 1100 MW turbine manufactured by OJSC "Turboatom" in the turbine hall of Balakovskaya NPP, Russia Nowadays, 18 million kw turbines, proven to be reliable and efficient sets, are in operation at Ukrainian (Zaporozhskaya NPP), Russian and Bulgarian NPPs 5

6 Zuyevskaya TPP Rostovskaya NPP Series of hydroelectric power plants of Dneprovskiy cascade 6

7 Rotors of low-pressure cylinders The low-pressure rotors of large capacity steam turbines of OJSC "Turboatom" are traditionally manufactured as welded from separate forged parts made of high-quality alloy steels For rotor welding there were created unique automatic seam-welding machines allowing to weld rotors measuring 12.5 meters in length, up to 3 in diameter and weighing up to 200 tons Totally, the enterprise has manufactured about 500 welded rotors 7

8 1100 OJSC Turboatom Prospects of development of steam turbines manufactured by OJSC "Turboatom" For NPP units of increased unit capacity OJSC "Turboatom" offer 1200 MW and 1600 MW steam turbines for 1500 rpm developed on the basis of the proven design and engineering solutions using manufacturing expertise and operating experience of the existing large capacity turbines The development of turbines for thermal power engineering is related to the implementation of the new low-pressure last stage blade 1100 mm long and the development of super-supercritical parameters of steam 8

9 Francis turbines for heads up to 410 m and output up to 615 MW Shop handling of runner for El Cajon HPP, Mexico Functional tests of 4 m dia. spherical valve for Tehri HPP, India Wicket gate check assembly for La Yesca HPP, Mexico 9

10 Kaplan turbines for heads up to 70 m and output up to 230 MW Erection of runners at Kanevskaya HPP, Ukraine Erection of runners at Dneprodzerzhinskaya HPP, Ukraine 10

11 Dnestrovskaya PSP, Ukraine (330 MW, Drunner =7.3 m) Francis turbines for heads up to 170 m and output up to 400 MW Runner preparation for coupling to hydro machine shaft Transportation of hydro machine runner 11

12 Dnestrovskaya PSP, Ukraine (330 MW, Drunner =7.3 m) Francis turbines for heads up to 170 m and output up to 400 MW Check assembly of hydro machine wicket gate Machining of hydro machine stay ring 12

13 Francis turbines for heads up to 410 m and output up to 615 MW Draft tube erection for El Cajon HPP, Mexico Transportation to La Yesca HPP site, Mexico Spiral case welding for Tehri HPP, India 13

14 Kaplan turbines for heads up to 70 m and output up to 230 MW Runner blade machining for Yinpan HPP, China Check assembly of Kaplan runners for Perepadnaya HPP, Georgia Check assembly of Kaplan runners for Shenxigou HPP, China 14

15 Check assembly of the Kaplan runner of 5.0 m diameter for the 25.0 MW turbine of Kamskaya HPP. Cooperation with RusHydro Butterfly main inlet valve of 4.5 m dia. for Golovnaya Zaramagskaya HPP. Machining of the turbine shaft of t weight, 7.25 m length, and 2.7 m diameter for Sayano-Shushenskaya HPP. 15

16 Research facilities of the company External view of test rig EKS-100 Hydro turbine model block The hydraulic research laboratory of OJSC Turboatom, one of the largest institutions in the field of hydro turbine production, comprises 25 test rigs and installations including 5 large-size test rigs External view of test rig EKS

17 Welded shafts for generating units Generator shaft of 60.5 t weight, 4.2 m length, and 2.7 m diameter for Bailianhe PSP, China. Turbine shaft of 63.0 t weight, 6.25 m length, and 1.9 m diameter for Bakun HPP, Malaysia. Machining of hydroturbine shaft of 53.0 t weight, 6.4 m length, and 2.4 m diameter for El Cajon HPP, Mexico. 17

18 Miscellaneous products Roll packing Machining of 196 t. roll for rolling mill The company has a unique equipment which permits to manufacture rolls up to 200 tonnes for rolling mills Dispatch on railway carrier 18

19 Technical re-equipment of welding engineering Adoption of technology of arc spraying of hydroturbines Technical re-equipment of OJSC "Turboatom" in use Technical re-equipment of foundry Adoption of technology of molding Technical re-equipment of mechanical assembly production Upgrade of "Waldrich Koburg" machine 19

20 Thank you for your attention Invite to close cooperation OJSC "Turboatom", Moskovsky avenue, 199, Kharkov, 61037, Ukraine Tel.: , Fax: www. turboatom.com.ua 20