Certificate of Compliance

Transcription

1 Certificate of Compliance Certification Details: Baron / Okamura CP Okamura This product has been certified according to the GREENGUARD Indoor Air Quality (IAQ) Certification Program for Low Emitting Products Certificate No: Status: Certified Period: 12/ /2011 Restrictions: NONE Reference Standard: GGPS.001 GREENGUARD IAQ Standard for Building Materials, Finishes, and Furnishings Product Type: Furniture Components/Materials, Seating, and Free Standing Furniture and Furnishing Units TVOC¹ Formaldehyde Total Aldehydes² Individual VOCs³ 4-phenylcyclohexene Criteria Allowable Limits 0.25 mg/m³ ppm 0.05 ppm 0.1 TLV mg/m³ Listing of measured carcinogens and reproductive toxins as identified by California Proposition 65, the U.S. National Toxicology Program (NTP), and the International Agency on Research on Cancer (IARC) must be provided. Any pollutant regulated as a primary or secondary outdoor air pollutant must meet a concentration that will not generate an air concentration greater than that promulgated by the National Ambient Air Quality Standard (U.S. EPA, code of Federal Regulations, Title 40, Part 50). See referenced standard for a complete technical explanation. ¹ Defined to be the total response of measured VOCs falling within the C6 C16 range, with responses calibrated to a toluene surrogate. ² Defined to be the total response of a target list of aldehydes (2-butenal; acetaldehyde; benzaldehyde; 2, 5-dimethylbenzaldehyde, 2-methylbenzaldehyde; 3-and/or 4-methylbenzaldehyde; butanal; 3-methylbutanal; formaldehyde; hexanal; pentanal; propanal), with each individually calibrated to a compound specific standard. ³ Any pollutant not listed must produce an air concentration level no greater than 1/10 the Threshold Limit Value (TLV) industrial work place standard (Reference: American Conference of Government Industrial Hygienists, 6500 Glenway, Building D-7, Cincinnati, Ohio ). Complies with ANSI/BIFMA X7.007, ANSI/BIFMA M7.007, and BIFMA e Credit for Furniture. GREENGUARD Certification affirms that products meet the criteria of the referenced standard and the requirements of the specific certification program. Certification testing is conducted according to a consistent, defined protocol. The testing does not evaluate emissions under usage conditions other than those defined in the protocol and does not address potential environmental impact other than chemical and particle emissions. The GREENGUARD Environmental Institute (GEI) is an industry independent, third-party certification organization that qualifies products for low chemical emissions. GREENGUARD Certification programs use defined product standards, test methodologies, product sample collection and handling procedures, program application processes and on-going verification procedures. GREENGUARD standards, methods, and procedures are available at GREENGUARD Environmental Institute GGPC.001D

2 04 LEED Credit Summary Program Category Item Contribution Point of contribution LEED 2009 for Commercial Interiors Materials & Resources MR 3.2 Materials Reuse Furniture and Furnishings This product (Baron) is designed to be refurbished and easy replacement. And it can be used any longer by having proper maintenance. Product can contribute to the this point by reusing. In Japan, Okamura has a service network by its subsidary, Okamura Support and Service. 1 MR 4 Recycled content 56.0% (1/2 Pre-Consumer: 5%, Post-Consumer: 53.5%) MR 5 Regional materials Assembled in Yokosuka city, Kanagawa, Japan. Please contact us in case of the delivery outside of Japan. Indoor Environmental Quality IEQ 4.5 Low emitting materials, System Furniture and Seating Greenguard certified 1 Innovation & Design ID 1 Innovation in design High percentage of recycled content. 1-5 LEED 2009 for New Construction and Major Renovations Materials & Resources MR 3 Material Reuse This product (Baron) is designed to be refurbished and easy replacement. And it can be used any longer by having proper maintenance. Product can contribute to the this point by reusing. In Japan, Okamura has a service network by its subsidary, Okamura Support and Service. MR 4 Recycled Content 56.0% (1/2 Pre-Consumer: 5%, Post-Consumer: 53.5%) Innovation & Design ID 1 Innovation in design Greenguard certified 1-5 LEED 2009 for Existing Buildings, Operations and Maintenance Materials & Resources MR 1 Sustainable Purchasing Ongoing Consumables % (1/2 Pre-Consumer: 5%, Post-Consumer: 53.5%) MR 2 Sustainable Purchasing Durable Goods Visit the Okamura website for the latest updates on Okamura products.

3

4 Compliance with international Standards Jun Standard Test Lab Country Region Product Category Standard description Issue date Note GS Safety Label LGA Germany Germany Office Chair Product safety proof GS-Nr Visitor Chair (includes factory audit) GS-Nr EN1335-1/2/3 LGA Germany Europe Office Chair Dimension - EN /06/2005 Test Report Safety - EN No Q IWQ MBL Structural test - EN EN13761 LGA Germany Europe Visitor Chair Dimension, Safety requirements EN Test Report Test method - EN1728 No Q IWQ MBL Determination of stability - EN1022 ANSI / BIFMA X5.1 Entela USA North America Office Chair Structural test, stability May 24,2005 Report No: EN SGS China Europe Castor for office chair Strength test Sep 28,2005 Test Report -CSTC No.GLHG FT BS5459 Part2 FIRA UK UK Office Chair Structural test 30 Nov 2005 Test certificate TECHNICAL REPORT TSSEF06975 BS5852 FIRA UK UK Chair with upholstery Flame retardancy test- fabric & cushion under review (EN102) DIN LGA Germany Europe Gas spring for chair Structural test Acquired by Stabilus TB117 A-1,D-2 E-1 BHFTI USA California Chair with upholstery Flame retardancy test- fabric & cushion under review TB133 ENTELA USA California Chair Flame retardancy test- Assembled product under review With flame retardant fabric and cushion Revision Nov Revision Dec CP-H201

5 Baron Operating Instructions Backrest Reclining Baron's synchro tilt reclining can be locked in any position by the lever on the lower left side. Adjustment range : 0 degree - 23 degrees Seat Height adjustment Chair height can be adjusted by the lever on the lower right side. Range : 130mm Tension adjustment Turning the grip found under the right side of the seat increases or reduces the resistance of the chair back while reclining. Tension can be adjusted in wide range to fit you. Armrest adjustment The height of the ratchetstructure armrests can be adjusted up to 100mm simply by lifting the arm pad. The armrest angle is adjustable in 30 degrees incriments up to 90 degrees. Seat Depth adjustment Grab the lever beneath the seat (Both right and left side) to release the seat slide lock. Making the knee angle 90 degrees in sitting back position is the best seat position. Range : 50mm Lumbar Support (option) An adjustable lumbar support can be attached whenever you need. Lumbar support position can be adjusted in the sitting position. Range : 50mm (vertical) Copyright Okamura Corporation, All rights reserved. Access ( for further information.

6 Baron General Specifications Mobility and Adjustability - Pneumatic seat-height adjustment - Seat depth adjustment - Synchro-tilt reclining mechanism (23 degrees) - Analog reclining tension adjustment - Analog reclining lock - Adjustable armrest (height and pivot) - Height adjustable lumbar support (option) Specifications <BIFMA, mesh model> - High back - - Low back - - Elastic mesh back - Low back/high back/extra-high back - Elastic mesh or upholstered cushion seat - Polished or powder coated aluminum frame and five-star base - Available to add : Adjustable lumbar support, Adjustable armrest, Fixed armrest - 60mm diameter hard (nylon) castor - Optional castor 1) Hard friction castor 2) Soft (poly-urethane) castor 3) Soft friction castor - Dimensions conform international standards Standards Materials Achieved Awards - Baron is developed to conform international office chair standards such as ANSI/BIFMA X5.1, EN1335 and GS. - Depending on selected specifications, Baron meets BS5459:(2000):Part 2, that certifies the chair to be structurally suitable and sufficiently stable for 24 hour use, when used by persons up to 150 kg in weight. - Production plant conforms ISO9001 for quality control. - Frame : Aluminum die-casting - Shell : Polyamid - Base : Aluminum die-casting - Mesh : Polyester - Fabric : Polyester - Cushion : Polyurethane (Non-CFC) - if Product Design Award 2006 (2006, Germany) - Good Design Award 2005 (2005, Japan) - Red Dot Award : Product Design 2006 (2006, Germany) Environmental Factors - ISO14001 certified for the total corporate activity - 97% recyclable. Designed to have minimum number of parts and easy to separate components. - Using 53% recycled materials by product weight - Available to use 62% recycled contain fabric for seat upholstery - No adhesive agent is used in mesh type. All VOC free - Components are easy to separate which provides long product life time by replacing parts - Zero-emission production Copyright Okamura Corporation, All rights reserved. Access ( for further information.

7