MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Roundit PPS Manufacturer Name: Federal-Mogul World Headquarters Northwestern Highway Southfield, Michigan USA Emergency Telephone: 24hr EP (INFOTRAC): International: (001) Non-emergency Telephone: Intended Use: Protective Sleeving Contact Person: MSDS Request (voic ) HAZARDS IDENTIFICATION Emergency Overview Physical State: Solid (Sleeve) Color: Various Odor: Odorless Under normal conditions of processing and use, exposure to the chemical constituents in this product is unlikely. Used as intended, this product is not expected to generate potentially hazardous quantities of dust or fumes. Potential Health Effects Inhalation: Eye Contact: No adverse effects due to eye contact are expected. Skin Contact: No adverse effects due to skin contact are expected. Ingestion: Chronic Health Effects: Potential Physical / Chemical Effects: This product is not flammable. Will burn if involved in a fire. OSHA Regulatory Status: This product is not hazardous according to OSHA 29CFR Environment: The product is not expected to be hazardous to the environment. NORTH AMERICAN MSDS 1 / 6

2 3 COMPOSITION / INFORMATION ON INGREDIENTS General Information: The product is a self-wrapping sleeve manufactured from polyphenylene sulfide (PPS) monofilaments and will pose no hazards. The components are not hazardous or are below required disclosure limits. 4 FIRST AID MEASURES Inhalation: No specific first aid measures noted. Eye Contact: No specific first aid measures noted. However, immediately flush with plenty of water for at least 15 minutes. Skin Contact: No adverse effects due to skin contact. Ingestion: No adverse effects due to ingestion are expected. 5 FIRE-FIGHTING MEASURES Extinguishing Media: This product is not flammable. Will burn if involved in a fire. Use fire-extinguishing media appropriate for surrounding materials. Unsuitable Extinguishing Media: Special Fire Fighting Procedures: other involved materials. Unusual Fire & Explosion Hazards: Hazardous Combustion Products: None. Use standard firefighting procedures and consider the hazards of During fire, gases hazardous to health may be formed. Carbon Monoxide, Sulfur Oxides Protective Measures: case of fire. Self-contained breathing apparatus and full protective clothing must be worn in 6 ACCIDENTAL RELEASE MEASURES Personal Precautions: Used as intended, this product is not expected to generate potentially hazardous quantities of dust or fumes. See Section 8 of the MSDS for Personal Protective Equipment. Spill Cleanup Methods: Collect and dispose of spillage as indicated in section 13 of the MSDS. Environmental Precautions: No specific precautions. 7 HANDLING AND STORAGE Handling: Normal handling and use of this product should not generate dust or fumes. Observe good industrial hygiene practices. NORTH AMERICAN MSDS 2 / 6

3 Storage: Store in closed original container in a dry place. 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Limits: No exposure limits noted for ingredient(s) on ACGIH, OSHA and WEEL lists. Engineering Controls: Used as intended, this product is not expected to generate potentially hazardous quantities of dust or fumes. No special control measures are required for the normal handling and dispensing of this medication. Respiratory Protection: No protection is ordinarily required under normal conditions of use and with adequate ventilation. Eye Protection: Hand Protection: Skin Protection: No special precautions. It is a good industrial hygiene practice to minimize skin contact. No skin protection is ordinarily required under normal conditions of use. Hygiene Measures: Wash hands after contact. 9 PHYSICAL AND CHEMICAL PROPERTIES Color: Various Odor: Odorless Odor Threshold: No data available. Physical State: Solid (Sleeve) ph: Not applicable Melting Point: 285 C (545 F) C (572 F) Freezing Point: No data available. Boiling Point: Not applicable. Flash Point: No data available. Evaporation Rate: No data available. Flammability Limit - Upper (%): Not applicable. Flammability Limit - Lower (%): Not applicable. Vapor Pressure: Not applicable. Vapor Density (Air=1): Not applicable. Specific Gravity: Not applicable. Solubility in Water: Insoluble Solubility (Other): No data available. Partition Coefficient (n-octanol/water): No data available. Autoignition Temperature: >500 C (932 F) Decomposition Temperature: >370 C (698 F) Volatile Organic Compounds (VOC): Not applicable. Viscosity: Not applicable. Explosive Properties: No data available 10 STABILITY AND REACTIVITY Stability: Stable under normal temperature conditions and recommended use. NORTH AMERICAN MSDS 3 / 6

4 Conditions to Avoid: No special precautions. Incompatible Materials: No data available. Hazardous Decomposition Products: At Elevated Temperatures: Carbon Monoxide, Sulfur Oxides Possibility of Hazardous Reactions: Will not occur. 11 TOXICOLOGICAL INFORMATION Specified Substance(s) Acute Toxicity: Test Results: No test data available for the ingredients. Listed Carcinogens: None. Product Information Acute Toxicity: Test Results: No test data available for the product. Other Acute: Used as intended, this product is not expected to generate potentially hazardous quantities of dust or fumes. Chronic Toxicity: 12 ECOLOGICAL INFORMATION Ecotoxicity: The product is not expected to be hazardous to the environment. Mobility: Persistence and Degradability: Not relevant. Bioaccumulation Potential: Not relevant. 13 DISPOSAL CONSIDERATIONS General Information: Dispose of waste and residues in accordance with local authority requirements. Disposal Methods: Disposal recommendations are based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal. 14 TRANSPORT INFORMATION DOT NORTH AMERICAN MSDS 4 / 6

5 TDG IATA IMDG 15 REGULATORY INFORMATION Canadian Controlled Products Regulations: This product has been classified according to the hazard criteria of the Canadian Controlled Products Regulations, Section 33, and the MSDS contains all required information. WHMIS Classification: This is not a WHMIS controlled product. Mexican Dangerous Statement: This product is not dangerous according to Mexican regulations. US Regulations CERCLA Hazardous Substance List (40 CFR 302.4): SARA Title III Section 302 Extremely Hazardous Substances (40 CFR 355, Appendix A): Section 311/312 (40 CFR 370): Acute (Immediate) Chronic (Delayed) Fire Reactive Pressure Generating Section 313 Toxic Release Inventory (40 CFR 372): Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR ): Clean Water Act Section 311 Hazardous Substances (40 CFR 117.3): Drug Enforcement Act: TSCA TSCA Section 4(a) Final Test Rules & Testing Consent Orders: TSCA Section 5(a)(2) Final Significant New Use Rules (SNURs) (40CFR 721, Subpt. E): regulated. Not TSCA Section 5(e) PMN-Substance Consent Orders: TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D): State Regulations California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): regulated. Not NORTH AMERICAN MSDS 5 / 6

6 Massachusetts Right-To-Know List: Michigan Critical Materials List (Michigan Natural Resources and Environmental Protection Act (Act. 451 of 1994)): Minnesota Hazardous Substances List: New Jersey Right-To-Know List: Pennsylvania Right-To-Know List: Rhode Island Right-To-Know List: 16 OTHER INFORMATION HAZARD RATINGS Health Hazard Fire Hazard Instability Special Hazard NFPA Hazard rating: 0 - Minimal; 1 - Slight; 2 - Moderate; 3 - Serious; 4 - Severe NFPA Label colored diamond code: Blue - Health; Red - Flammability; Yellow - Instability; White - Special Hazards Health Hazard Flammability Physical Hazard Personal Protection HMIS NONE Hazard rating: 0 - Minimal; 1 - Slight; 2 - Moderate; 3 - Serious; 4 - Severe HMIS Label colored bar code: Blue - Health; Red - Flammability; Orange - Physical Hazards; White - Special Issued by: Federal-Mogul Corporation Issue Date: Supercedes Date: SDS No.: Roundit PPS_NA Disclaimer: The information provided on this data sheet was abstracted from supplier material safety data sheets and standard references in occupational health and toxicology. Federal-Mogul makes no representation or warranty with respect to the information obtained from such references. The information is however, as of the date provided, true and accurate to the best of Federal-Mogul's knowledge, and should be used to make an independent determination of the methods to safeguard workers and the environment. NORTH AMERICAN MSDS 6 / 6