THE SMALLEST THREAT CAN CAUSE THE GREATEST DAMAGE

Transcription

1 THE SMALLEST THREAT CAN CAUSE THE GREATEST DAMAGE Discover our wide range of disinfection/decontamination products and services designed to reduce the threat of cross contamination in your facility Life Sciences

2 TOMI Environmental Solutions, Inc. Why SteraMist is the Right Solution An Innovator in Life Sciences Disinfection/Decontamination TOMI offers bio-decontamination solutions through the manufacturing, sales and service of the SteraMist brand of products. Implementing the use of Ionized Hydrogen Peroxide (ihp ) powered by SteraMist Binary Ionization Technology (BIT ) provides many benefits to a facility. This powerful tool is capable of eliminating all contamination challenges within critical environments faster than any competitors on the market and without the production of byproducts. This technology offers: A visual mist that moves like a gas. Touchless application disinfection/decontamination solution. Quick drying time - no wipe, no rinse, no residue. No blistering of paint and is silver ion free. Compatible with surfaces commonly found in life sciences facilities including rubbers, finished surfaces, and all electronic devices. Proven efficacy against a wide range of microorganisms. EPA Registered against a wide range of microorganisms/epa Reg. No SteraMist can be found in domestic and international facilities such as pharmaceutical, compounding and manufacturing labs, vivariums, injectable formulation, and many more. All new client sites receive a custom evaluation by a certified TOMI Technician to ensure a successful treatment. Please the TOMI Worldwide Life Sciences Network at tomiservice@tomimist.com to schedule an on-site evaluation. History 2001: Responding to Amerithrax Attacks In response to the 2001 Amerithrax (Anthrax attacks), the Defense Advanced Research Projects Agency (DARPA) and a large U.S. defense contractor joined forces to develop Binary Ionization Technology (BIT ) and its SteraMist platform which proved to be capable of defending against biological and chemical agents. 2011: Acquiring the Technology TOMI recognized the importance of this disruptive and innovative technology to address a global need. TOMI, along with other companies, started a bidding process to commercialize, manufacture, and secure the rights, intellectual property and prototypes for SteraMist BIT. 2013: Proving Efficacy After several years of negotiations, TOMI won the rights and started the process to secure all necessary registrations. The first step was to register with the EPA after many successful Good Laboratory Practice (GLP) tests. The Environmental Agency (EPA) granted TOMI the first ever solution and technology combination registration And Beyond Many large internationally recognized pharmaceutical companies have successfully integrated SteraMist technology into their routine disinfection/decontamination protocols. SteraMist is EPA lists K, L, G, and M registered. The broad-based technology has been used in all areas of the Life Sciences industry including: vivariums, research and pharmaceutical labs, compounding facilities, and even those facilities with stringent regulatory safety requirements such as BSL-4 laboratories. Innovating for a Safer World Currently, the technology is implemented in all corners of the globe as multiple registrations are secured both domestically and internationally, including a registration with the U.S. Food & Drug Administration as a disinfectant medical device (Reg # ). As the customer base expands and manufacturing demands increase, the TOMI commitment to ongoing research and development efforts remains constant.

3 SteraMist Binary Ionization Technology The ihp Process (Ionized Hydrogen Peroxide) The EPA registered 7.8% Hydrogen Peroxide BIT Solution converts to ihp after passing through an atmospheric cold plasma arc. ihp contains a high concentration of Reactive Oxygen Species (ROS) composed mostly of Hydroxyl Radicals. LIFE SCIENCES ROS damage pathogenic organisms through oxidation of proteins, carbohydrates, and lipids. This leads to cellular disruptions and/or dysfunction and allows for disinfection/decontamination in the targeted areas and large spaces. FOOD SAFETY

4 Efficacy Data BINARY IONIZATION TECHNOLOGY (BIT ) SOLUTION Effective broad-spectrum surface and air disinfectant/decontaminant. Effective against bacterial spores and gram-negative bacteria, including multiple drug resistant organisms (MDROs). Effective for mold mitigation and remediation. Ultimate tool for elimination of bacteria and viruses. Does not require adjustment to room temperature or humidity before application. Suitable for frequent/daily use.

5 Description The SteraMist Surface Unit is a fully portable, handheld, point and spray disinfection/decontamination system. Application time of only five seconds per square foot and a seven-minute contact time to disinfect/decontaminate. The SteraMist Surface Unit disinfects/decontaminates high touch surfaces. Benefits Kills bacteria 1 and inactivates viruses 2 reducing the risk of potential exposure in a treated space. Easily incorporated into your daily cleaning protocols, perfect for frequent use in entry and exit points. Allows immediate disinfection/decontamination in the case of accidental spills. Mobile for rapid deployment throughout a facility, lightweight, easy to transport, and capable of achieving reliable disinfection/decontamination. Silver, Chlorine, and Peracetic Acid free formula maximizes material compatibility on rubber, metals, and other surfaces. Voltage Feature Disinfection/Decontamination Technology Number of ihp spray ports 1 Dimensions Weight Particle Size Broad Spectrum Kill Safe for Sensitive Equipment Flow Rate Treatment Method 110 V AC, 5A HHA-101 Ionized Hydrogen Peroxide (ihp TM ) 0.64 m Length x 0.56 m Width x 0.38 m Depth (approximately 25 x 22 x 15 ) Approximately 22 kg (~48 lbs.) Applicator approximately 8lbs Microns 50 ml per minute Dose Application 1 ml per ft. 2 Application Time Contact Time Warranty (parts & labor) Direct Application onto Surfaces 5 seconds over a 1 ft 2 treatment area 7 minutes 12 months SteraMist Surface Unit 1 Staphylococcus aureus (ATCC #6538), Pseudomonas aeruginosa (ATCC #15442), Methicillin Resistant Staphylococcus aureus (ATCC #33592), Salmonella entercia (ATCC #10708) 2 Influenza A (H1N1) virus (ATCC #VR-1469)

6 Description The SteraMist Environment System is transportable and provides complete room disinfection/decontamination, deodorization, and mold mitigation using multiple treatment applicators per unit. Effective whole complete room treatment in just under 45 minutes* for a room (3,663.7 ft. 3 /104 m 3 ). Feature TPO-300 *Less time is typically needed for smaller sized rooms. Benefits Easy to transport and can be configured to treat multiple spaces simultaneously. Automated/remote controlled system with downloadable data sets. Voltage Disinfection/Decontamination Technology Number of ihp spray ports 3 Dimensions Weight Particle Size Broad Spectrum Kill 120 V AC, 5A Ionized Hydrogen Peroxide (ihp ) 1.2 m Length x 0.61 m Width x 0.61 m Depth (approximately 47 x 24 x 24 ) Approximately kg (~140 lbs.) Microns Whole room solution to eliminate bacteria 3 and inactivate viruses 4, including Norovirus. 4 Safe for Sensitive Equipment Flow Rate Treatment Method 25 ml per minute per applicator Complete Room Disinfecting System SteraMist Environment System Less down time than competing technologies. Injection times are based on individual room size and number of SteraMist applicators - precise measurement of H 2 O 2 dispersement. 3 Staphylococcus aureus (ATCC #6538), Pseudomonas aeruginosa (ATCC #15442), Methicillin Resistant Staphylococcus aureus (ATCC #33592), Salmonella entercia (ATCC #10708), Clostridium difficile spores (ATCC #43598) 4 Norovirus (Feline Calicivirus) (FCV) (ATCC #VR-782) Dose Application.5 ml. per ft. 3 Application Rate/Time Contact Time Aeration Time Effective complete room treatment in just over 75 minutes for a room 3,663.7 ft 3 /104 m 3 including application time, contact time, and aeration time. Less time is typically needed for smaller size rooms. Room is safe to enter once hydrogen peroxide is below 0.2 ppm. Warranty (parts & labor) 12 months

7 STERAMISTTM BUILD-INS Description SteraMist technology is not only a rapidly deployable disinfection/decontamination system, it also creates an efficient solution when it comes to full room disinfection/decontamination for facilities with unique needs which mobile units may not completely meet. SteraMist Build-Ins such as the SteraMist Fixed Complete Room System has quickly become popular both domestically and internationally throughout the life sciences realm to facilitate maximum results. Benefits PLC interfaces with building s HVAC System for room isolation and aeration. Two level security-password protected. Automated equipment for decontamination of any closed area. Downloadable disinfection/decontamination run data. Real-time measurement of injection rates to ensure targeted injection volume. Entire system can be developed for multiple rooms and various specifications. Voltage Feature Disinfection/Decontamination Technology Cord Length Dimensions Weight Particle Size Broad Spectrum Kill Safe for Sensitive Equipment Flow Rate Treatment Method Dose Application Application Rate/Time Contact Time Aeration Time Warranty (parts & labor) Build-In See Your Custom Design Ionized Hydrogen Peroxide (ihp ) Prefixed based on design See your Custom Design N/A Microns Based on your Custom Design Complete Room/Surface See Custom Specifications Effective complete room treatment is based on your design which includes application time, contact time, and aeration time. Room is safe to enter once hydrogen peroxide is below 0.2 ppm. See Contract

8 STERAMISTTM Description APPLICATORS The SteraMist Applicator and generator combination is the key to this patented technology. The applicator is where the cold plasma arc splits the hydrogen peroxide based solution into many Reactive Oxygen Species including hydroxyl radicals which seek, kill, and render pathogens inactive. The APP-1PT and APP-3PT models allow for hand-held maneuverability, unparalleled control and the ability to mount for stationary application. This allows a diverse number of uses in conjunction with the SteraMist Surface Unit, SteraMist Environment System, SteraMist Fixed Complete Room System, and other SteraMist custom Build-In options. Benefits Feature Voltage Disinfection/Decontamination Technology Cord Length Dimensions APP-1PT, APP-3PT 110 or 220 v SteraMist TM Equipment Ionized Hydrogen Peroxide (ihp ) 30 APP-1PT / 20 APP-3PT 33.02cm x 10.16cm x 21.59cm (13 in Length x 4 in Width x 8.5 in Depth) Adaptable for any life science facility. Versatility allows technicians comfort and control when disinfecting/decontaminating. 2 Trigger positions allow for comfort in hand-held application. 30 Feet of Cord. Can be used with 110 or 220v SteraMist Equipment or for custom Build-In applications. Note: TOMI charges a nominal fee for purchase of applicators only. Applicators purchased separately are to be used in SteraMist Build-In custom options or as replacement applicators to customers who previously purchased SteraMist equipment. SteraMist BIT Solution is the ONLY approved solution to be used. Weight Approximately 3.62 kg (~8 lbs.) with hose Particle Size Microns Broad Spectrum Kill Safe for Sensitive Equipment Flow Rate Based on system/ unit used Treatment Method Complete Room/Surface Dose Application.5 ml per ft. 3 Application Rate/Time Effective complete room treatment in Contact Time just over 75 minutes for a room 3,663.7 ft. 3 /104 m 3 including application time, contact time, and aeration time. Less time Aeration Time is typically needed for smaller size rooms. Room is safe to enter once hydrogen peroxide is below 0.2 ppm. Warranty (parts & labor) 12 months/void if other solution is used

9

10 TOMI Service TOMI offers room, equipment, full facility, and emergency disinfection/decontamination services to reduce bioburden and eliminate the potential for costly microbial contamination and control laboratory outbreaks. Single and routine service can be provided to coincide with maintenance or to control a specific threat. Decontamination: TOMI SteraMist Technology is scalable and configurable to be effective in any size or volume of room. SteraMist has been successfully used to service: - Clean Rooms and Research Labs - Production Environments - Service & Technical Areas (HEPA filters) - Material pass through rooms - Corridors & Thoroughfares Equipment Decontamination: Non-caustic and silver-free, SteraMist BIT mist visibly moves over the equipment, leaving behind a fully disinfected/decontaminated instrument ready for use: - Safety Cabinets - General Lab Equipment - Isolators - HEPA Filters - Vivarium Caging - Decommissioned Equipment Whole Facility Decontamination: When considering utilization of TOMI Service, you will receive the direct attention of a knowledgeable SteraMist Technician who will ask, listen, and then execute. Along with personalized attention, whether you are a production or research facility, large or small, you will receive a: - Complimentary Site Survey - Technical Review - Customized Decontamination Plan, including guidance on appropriate methods and practices which fit your unique facility - Final Report Provided After Decontamination

11 SteraMist In Action Emergency Decontamination: The TOMI Service Team is on call 24 hours a day, every day, every year. If your facility needs immediate attention, Call or tomiservice@tomimist.com

12 HOSPITAL-HEALTHCARE LIFE SCIENCES TOMI SERVICE NETWORK FOOD SAFETY TOMI World Headquarters 9454 Wilshire Boulevard Penthouse G-6 Beverly Hills, CA Phone: Fax: TOMI East Coast Offices 5111 Pegasus Court Suite A Frederick, MD Phone: Fax: info@tomimist.com