TOXIC SUBSTANCE REDUCTION PLAN SUMMARY 3M CANADA, LONDON, ONT.

Transcription

1 TOXIC SUBSTANCE REDUCTION PLAN SUMMARY 3M CANADA, LONDON, ONT REPORTING YEAR BASIC FACILITY INFORMATION Name and CAS # of Substance(s) for which plans are required n-butyl alcohol Cyclohexane Isopropyl alcohol Methyl ethyl ketone Heptane (all isomers) Stoddard Solvent NA Facility Identification and Site Address Company Name Facility Name 3M Canada Company London Physical Address Mailing Address Facility Address 1840 Oxford Street East London, Ontario N5V 3R6 P.O. Box 5757 London, Ontario N6A 4T1 Spatial Coordinates of Facility UTM X UTM Y Datum NAD83 Expressed in Universal Transverse Mercator (UTM) within a North American Datum Number of Employees 237 (Number of full time employee equivalents) NPRI ID 3198 Ontario MOE ID Number 6664 Parent Company (PC) Information PC Name and Address 3M Canada Company 1840 Oxford Street East London, Ontario N5V 3R6 Percent Ownership 100 Primary North American Industrial Classification System Code (NAICS) 2 Digit NAICS Code 32 4 Digit NAICS Code Digit NAICS Code Facility Public Contact Company Contact Information Greg Snow Communications Manager Contact Information Planner Information Planner Responsible for making Recommendations and Certifying Plan Donna DeDecker Planner License No. TSRP0150

2 STATEMENT OF INTENT 3M Canada has a long history of responsible environmental stewardship, and remains committed to continuous improvement in Environmental, Health and Safety performance. We comply with respective regulations, but that is just a starting point. In many cases, our corporate policies and goals far exceed legal requirements. 3M Canada adopts the 3M Company Corporate Sustainability Goals which strive for continued environmental improvements, including reductions in air emissions, energy and waste. Reductions in air emissions, energy (GHG emissions) and waste have been achieved through product reformulation (including solventless technology), pollution prevention programs, the use of efficient pollution control equipment, process and equipment optimization, energy conservation programs, improvements in our manufacturing processes, including capital investment to upgrade to newer, more efficient equipment. These initiatives are managed in conjunction with an established Environmental Management System (ISO14001). Through this framework we will continue to develop products that support a sustainable environment. Where feasible and practicable, reduction options identified to reduce the use, creation and discharge of toxic substances will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. More information on 3M Sustainability and Environmental Policy can be found at N-BUTYL ALCOHOL Where feasible and practical, reduction options identified to reduce the use and discharge of n-butyl alcohol will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. Many options that were identified during the planning process that reduce the use and discharge of n- Butyl alcohol are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. n-butyl alcohol is used for on-site use/processing in the manufacturing of finished and semi-finished goods. Toxic reductions plans have been completed and reduction options have been identified for n-butyl alcohol as per the Toxic Reduction Act and Regulation. Many options that were identified during the planning process that reduce the use, discharge and contained in product of n-butyl alcohol are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature and therefore are not formally discussed in this summary. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation.

3 CYCLOHEXANE Where feasible and practical, reduction options identified to reduce the use, discharge and contained in product of Cyclohexane will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. Many options that were identified during the planning process that reduce the use and discharge of Cyclohexane are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. Cyclohexane is used for on-site use/processing in the manufacturing of finished and semi-finished goods. Toxic reductions plans have been completed and reduction options have been identified for Cyclohexane as per the Toxic Reduction Act and Regulation. Many options that were identified during the planning process that reduce the use and discharge of Cyclohexane are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature and therefore are not formally discussed in this summary. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. ISOPROPYL ALCOHOL Where feasible and practicable, reduction options identified to reduce the use, discharge and contained in product of Isopropyl alcohol will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. Many options that were identified during the planning process that reduce the use, discharge, and contained in product of Isopropyl alcohol are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. Isopropyl alcohol is used in the manufacturing of finished and semi-finished goods. Toxic reductions plans have been completed and reduction options have been identified for Isopropyl alcohol as per the Toxic Reduction Act and Regulation. Many options that were identified during the planning process that reduce the use, discharge and contained in product of Isopropyl alcohol are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature and therefore are not formally discussed in this summary. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation.

4 METHYL ETHYL KETONE Where feasible and practical, reduction options identified to reduce the use, discharge and contained in product of Methyl ethyl ketone will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. Many options that were identified during the planning process that reduce the use, discharge, and contained in product of Methyl ethyl ketone, are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation.. Methyl ethyl ketone is used for on-site use/processing in the manufacturing of finished and semi-finished goods. Toxic reductions plans have been completed and reduction options have been identified for Methyl ethyl ketone as per the Toxic Reduction Act and Regulation. Many options that were identified during the planning process that reduce the use, discharge and contained in product of Methyl ethyl ketone are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature and therefore are not formally discussed in this summary. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. HEPTANE Where feasible and practical, reduction options identified to reduce the use, discharge and contained in product of Heptane will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. Many options that were identified during the planning process that reduce the use, discharge and contained in product of Heptane are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. Heptane is used for on-site use/processing in the manufacturing of finished and semi-finished goods. Toxic reductions plans have been completed and reduction options have been identified for Heptane as per the Toxic Reduction Act and Regulation. Many options that were identified during the planning process that reduce the use, discharge and contained in product of Heptane are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature and therefore are not formally discussed in this summary. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation.

5 STODDARD SOLVENT Where feasible and practical, reduction options identified to reduce the use and discharge of Stoddard Solvent will be accomplished taking into account 3M Corporate policies, programs, targets and objectives. Many options that were identified during the planning process that reduce the use and discharge of Stoddard Solvent are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. Stoddard Solvent is used for on-site use/processing in the manufacturing of finished and semi-finished goods. Toxic reductions plans have been completed and reduction options have been identified for Stoddard Solvent as per the Toxic Reduction Act and Regulation. Many options that were identified during the planning process that reduce the use and discharge of Stoddard Solvent are initiatives that are already in progress. Initiatives currently in progress are deemed to be proprietary in nature and therefore are not formally discussed in this summary. Through the framework previously described in the Statement of Intent, we will continue to monitor the progress of these initiatives and report on the use, discharge and contained in product as required by the regulation. PLAN SUMMARY STATEMENT This plan summary accurately reflects the content of the toxic substance reduction plan for n-butyl alcohol, Cyclohexane, Isopropyl alcohol, Methyl ethyl ketone, Heptane, and Stoddard solvent prepared by 3M Canada Company dated Dec

6 COPY OF CERTIFICATIONS CERTIFICATION BY HIGHEST RANKING EMPLOYEE CERTIFICATION BY LICENSED PLANNER