Scan QR Code for authenticity. Authorization: Signature: Date: 0.62 wt% 7.31 mg/ml

Size: px
Start display at page:

Download "Scan QR Code for authenticity. Authorization: Signature: Date: 0.62 wt% 7.31 mg/ml"

Transcription

1 Certificate ID: Received: 9/20/18 Client Sample ID: Hemp Elixir LOT#OC18239 Lot Number: OC18239 Matrix: Tincture - Hemp Oil Scan QR Code for authenticity Ojai Energetics 318 Graves Ave Oxnard, CA Attn: William Kleidon Authorization: Signature: Date: Jon Podgorni, Lab Manager 10/4/2018 CN: Cannabinoid Profile & Potency [WI-10-04] CN ID Weight % Conc. D9-THC 0.03 wt % 0.34 mg/ml THCV ND ND CBD 0.55 wt % 6.55 mg/ml CBDV 0.02 wt % 0.28 mg/ml CBG ND ND CBC 0.02 wt % 0.24 mg/ml CBN 0.00 wt % 0.05 mg/ml THCA ND ND CBDA 0.07 wt % 0.87 mg/ml CBGA ND ND Total 0.70 wt% 8.33 mg/ml Max THC 0.03 wt% 0.34 mg/ml Max CBD 0.62 wt% 7.31 mg/ml Analyst: JDP Test Date: 10/3/2018 The client sample was analyzed for plant-based cannabinoids by Convergence Chromatography (CC). The collected data was compared to data collected for certified reference standards at known concentrations. Ratio of Total CBD to THC 21.6:1 0% Cannabinoids (wt%) 0.6% Max THC (and Max CBD) are calculated values for total cannabinoids after heating, assuming complete decarboxylation of the acid to the neutral form. It is calculated based on the weight loss of the acid group during decarboxylation: Max THC = (0.877 x THCA) + THC. ND = None detected above the limits of detection (LLD) FM-10-10, Rev. 1, DCN: Page 1 of 5

2 EA: Elemental Analysis [WI-10-13] Analyst: JFD Test Date: 10/2/2018 This test method was performed in accordance with the requirements of ISO/IEC These results relate only to the test article listed in this report. Reports may not be reproduced except in their entirety EA Symbol Metal Conc. 1 MDL Limits 2 Status Al Aluminum 2,406 ug/kg 5 ug/kg - As Arsenic 20 ug/kg 4 ug/kg 150 ug/kg Cd Cadmium 1 ug/kg 1 ug/kg 150 ug/kg Ca Calcium 70,403 ug/kg 500 ug/kg - Cr Chromium 68 ug/kg 5 ug/kg 2500 ug/kg Co Cobalt 12 ug/kg 10 ug/kg - Cu Copper ND 500 ug/kg ug/kg Fe Iron 10,651 ug/kg 5 ug/kg - Pb Lead 43 ug/kg 2 ug/kg 500 ug/kg Mg Magnesium 242,673 ug/kg 500 ug/kg - Mn Manganese 2,471 ug/kg 500 ug/kg - Hg Mercury ND 2 ug/kg 150 ug/kg Mo Molybdenum ND 5000 ug/kg 1000 ug/kg Ni Nickel ND 500 ug/kg 150 ug/kg P Phosphorus ND 500 ug/kg - K Potassium 1,399,934 ug/kg 5 ug/kg - Se Selenium ND 10 ug/kg - Ag Silver ND 10 ug/kg - S Sulfur 1,758 ug/kg 5 ug/kg - Sn Tin ND 5000 ug/kg - Zn Zinc 1,935 ug/kg 5 ug/kg - 1) ND = None detected to the Method Detection Limit (MDL) 2) USP recommended maximum daily limits for inhalational drug product. FM-10-10, Rev. 1, DCN: Page 2 of 5

3 PST: Pesticide Analysis [WI-10-11] Analyst: CJH Test Date: 10/4/2018 The client sample was anlayzed for pesticides using Liquid Chromatography with Mass Spectrometric detection (LC/MS/MS). The method used for sample prep was based on the European method for pesticide analysis (EN 15662) PST Analyte CAS Result Units LLD Limits (ppb) Status Abamectin ND ppb Abamectin B1b ND ppb * Azoxystrobin ND ppb Bifenazate ppb Bifenthrin ND ppb Cyfluthrin ND ppb * Daminozide ND ppb Etoxazole ND ppb Fenoxycarb ND ppb Imazalil ND ppb Imidacloprid ND ppb Myclobutanil ND ppb Paclobutrazol ND ppb Piperonyl butoxide ND ppb Pyrethrin ND ppb Spinosad ND ppb Spiromesifen ND ppb * Spirotetramat ppb Trifloxystrobin ND ppb * Testing limits for ingestion established by the State of California: CCR, Title 16, Division 42, Chapter 5, Section ND indicates "none detected" above the lower limit of detection (LLD). Analytes marked with (*) indicate analytes for which no recovery was observed for a prespiked matrix sample. FM-10-10, Rev. 1, DCN: Page 3 of 5

4 TP: Terpenes Profile [WI-10-08] Analyst: CJH Test Date: 10/1/2018 The client sample was analyzed by Head-Space Gas Chromatography (HS-GC). The collected data was compared to data collected for certified reference standards at known concentrations TP Compound ppm Quantitative Profile Compound Myrcene 19 Terpineol Pulegone Camphene Isopulegol 8 Fenchone ppm Borneol B-pinene 42 Menthol* 18 Eucalyptol Nerolidol-cis G-terpenine A-terpenine 3-carene Nerolidol-trans A-pinene 13 A-bisabolol Linalool Citral-1 Citral-2 Linalyl Acetate Limonene 7 B-caryophyllene 207 Citronellol Caryophyllene Oxide 47 Geraniol Eugenol Ocimene-2 Guaiol 9 Ocimene-1 Sabinene A-phellandrene Humulene 88 Terpinolene 12 P-cymene Quantitative Profile ppm Total Terpene: <0.1 wt% * Indicates qualitative calculation based on recorded peak areas. FM-10-10, Rev. 1, DCN: Page 4 of 5

5 VC: Analysis of Volatile Organic Compounds [WI-10-07] Analyst: CJH Test Date: 10/1/2018 The client sample was analyzed by Head-Space Gas Chromatography (HS-GC). The collected data was compared to data collected for certified reference standards at known concentrations VC Compound CAS Amount 1 Limit 2 Status Propane ND N/A - Isobutane ND Butane ND Methanol ppm 3,000 ppm Ethanol ND 2,2-Dimethylbutane ppm 290 ppm Acetone ppm Isopropanol ppm Acetonitrile ND 410 ppm 2,3-Dimethylbutane ND 290 ppm 3-Methylpentane ppm 290 ppm Hexane ppm 290 ppm Heptane ppm Toluene ND 890 ppm 1) ND = None detected above 5 ppm. 2) In ppm, based on USP recommended limits for residual solvents, adopted by the Massachusetts Department of Public Health on 3/31/16. Butane/Propane limits are based on limits established for state of Colorado. END OF REPORT FM-10-10, Rev. 1, DCN: Page 5 of 5