Checklist public areas / municipal

Transcription

1 Checklist public areas / municipal A company of the PCE-Group

2 General data Date: Construction project: Client: Address: Contact: Phone: Need (Markets/festivals...): User frequency (weekly/once a year...): Number of delivery points: Location (walkway/street...): Location on a slope: yes no Location on a slope: Ground water level higher than 1m: yes no Monument protection: yes no Problems with vandalism: yes no Danger of flooding: yes no Existing dewatering: yes no Drivable by car: yes no 2 Moser Systemelektrik GmbH

3 Stainless steel energy bollards Retractable Supply Post with spindle drive Market place distributors Aluminium columns MS290 Stainless stell wall distributors Underground unit with hatch pit

4 Retractable supply post with spindle drive Maximum security (recorded by VDE certification) Vandal-proof (and invisible retracted in the floor) Quick use (rise, connect, finished) Surface adjustment (cover can be paved individually) Everything from one source (from planning to the installation) Closed complete unit Integrated dewatering Individual two-sided assembly Foundation not necessary 4 Moser Systemelektrik GmbH

5 Underground unit with hatch pit Easy opening by pneumatic spring Solid construction out of solid material (V2A) Surface adjustment (cover can be paved individually) Walk- and drivable during operation Load capacity by on-site concreting High-quality chromium- and nickel steel materials An independent opening because of vibrations of passing cars, which drive across the cover, is prevented through an additional bolting. Individually, customer-oriented equipment Cable wiring possible in two different directions Moser Systemelektrik GmbH 5

6 Planning Instructions To guarantee an error-free functionality, a smooth installation and connection, you should consider necessarily different local circumstances in your demand planning! Water connection (drinking water) There is a fundamental difference between drinking water and fresh water. If you need drinking water, the following regulations must be observed: Definition of drinking water according to drinking water ordinance 2011, Art. 1,1.Section; 3,1.Paragraph : As drinking water all the water is called (also after treatment), which is used for drinking, cooking, for preparing food and drinks, for personal hygiene and cleaning, for cleaning of objects, which are in contact with the body. Therefore also for the cleaning of food, drinking water has to be used. Water supply facilities from which drinking water is discharged should not be connected to appliances using water, where there is water, which is not intended for human consumption, without the generally recognized regulations for technology. Technical main problems: Stagnant water in the pipe (without the required water exchange (at least once every 7 days) No removal over a longer period (see brochure Federal Environment Agency, drinking water) Pressure loss in public water system (flow) All materials used must be provided with DVGW Approval With our underfloor systems, we offer the possibility of a tested drinking water solution as well as a fresh water connection, if drinking water quality should not be required. Sewage water Devices with a sewage water connection have to be connected necessarily to the canalization. Drainage To protect the electrical room from water and to avoid a full run of the underfloor units, a drainage is necessary. The version with connection to the canalization is always to be preferred. If this is not possible, the unit can be set in a gravel bed and to be wrapped with a drainage pipe. Attention: The coarse gravel bed should be protected by means of fleece of the fine dirt particles, otherwise the gravel bed will be clogged and it comes to backwater and to flood! Location on a slope has to be considered separately! Danger of flooding and high groundwater levels To guarantee the functionality of the device even in case of flooding and high groundwater levels, the connection distributor can be poured with casting resin. The distributor cabinet can be additionally protected with a diving bell. Load classes according to DIN EN 124/1229 Our underfloor units are available, depending on the type, in the cover loads of 1,5 tons, 12,5 tons and 40 tons. 1,5 tons Load class A15 Traffic areas that can be used by pedestrians only. 12,5 tons Load class B125 Sidewalks, pedestrian areas and comparable areas, car parking areas and car parking decks. 40 tons Load class D400 Lanes from roads (also pedestrian streets), side-strips of roads and parking areas, which are approved for all types of road vehicles. 6 Moser Systemelektrik GmbH

7 Technical data- Underground unity Preferred execution: Hatch Pit Spindle drive Load capacity of the cover (SEK): 1,5t 12,5t 25t 40t Cover can be paved individually (SEK): yes no Equipment: equipment mcb elcb water others units SE SEK CEE 16A 5p, 400V CEE 32A 5p, 400V CEE 63A 5p, 400V CEE 125A 5P, 400V CEE 16A 3p, 220V protective contact sockets.16a, 250V 16A, C, 1P 16A, C, 3P 32A, C, 3p 63A, C, 3p 125A, C, 3p 40/0,03A, 4p, Typ A 63/0,03A, 4p, Typ A 63/0,3A 4p, Typ A 100/0,03A 4p, Typ A 125/0,03A 4p, Typ A drinking water 1/2 fresh water 1/2 sewage water quick coupling Network configuration: TT TN-C TN-S Material supply pipe: Al Cu Connection terminals for: mm2 Loop through possibility: yes no Drinking water: Loop wiring system Branchline Moser Systemelektrik GmbH 7

8 MS290 connection column For public places Made out of high-quality, anodised aluminum Weatherproof, shock- and impact resistant Lockable Individual equipment for the customer Possible in every requested RAL-color 8 Moser Systemelektrik GmbH

9 Stainless steel energy bollards Corrosion-resistant and resistant to environmental influences Standard color is DB703, special colors powder-coated possible Floor anchoring by flange Lockable, standard with profile half cylinder Plug distributor IP54, wired ready for connection In winter time it is possible to use frost guards and auxiliary heatings The supply with water can be warranted Diameter 330mm; standard heights: 650, 850, 1050, 1280 and 1500mm Moser Systemelektrik GmbH 9

10 Planning instructions To guarantee an error-free functionality, a smooth installation and connection, you should consider necessarily different local circumstances in your demand planning! Water connection (drinking water) There is a fundamental difference between drinking water and fresh water. If you need drinking water, the following regulations must be observed: Definition of drinking water according to drinking water ordinance 2011, Art. 1,1.Section; 3,1.Paragraph : As drinking water all the water is called (also after treatment), which is used for drinking, cooking, for preparing food and drinks, for personal hygiene and cleaning, for cleaning of objects, which are in contact with the body. Therefore also for the cleaning of food, drinking water has to be used. Water supply facilities from which drinking water is discharged should not be connected to appliances using water, where there is water, which is not intended for human consumption, without the generally recognized regulations for technology. Technical main problems: Stagnant water in the pipe (without the required water exchange (at least once every 7 days) No removal over a longer period (see brochure Federal Environment Agency, drinking water) Pressure loss in public water system (flow) All materials used must be provided with DVGW Approval We offer the option of a drinking water solution as well as fresh water connection by the stainless steel bollards and aluminum columns MS290. Fixation We recommend a concrete foundation to fix the stainless steel energy bollards and the aluminum columns. Heating In case your stainless steel energy bollard should be equipped with a water connection, you have the option to equip your bollard with a pipe trace heater. 10 Moser Systemelektrik GmbH

11 Technical data overground supply Preferred execution: Aluminum column Stainless steel energy bollard Equipment: units aluminum column stainless steel energy bollards CEE 16A 5p, 400V CEE 32A 5p, 400V equipment mcb elcb water others CEE 63A 5p, 400V CEE 16A 3p, 220V protective contact sockets.16a, 250V 16A, C, 1P 16A, C, 3P 32A, C, 3p 63A, C, 3p 40/0,03A, 4p, Typ A 63/0,03A, 4p, Typ A 63/0,3A 4p, Typ A 100/0,03A 4p, Typ A drinking water 1/2 fresh water 1/ Supply cable: Protection: Connection terminals for: mm2 Loop through possibility: yes no Color: standard RAL/DB Moser Systemelektrik GmbH 11

12 Stainless steel distributors Corrosion-resistant and resistant to environmental influences Your required equipment and protection Standardly the surface is sanded, possibly powder coating on request Door with profile half cylinder lockable Material thickness from 1,5 up to 4 mm Useable in closed state by cable outlet Possibly cable lead-in from the bottom and the top 12 Moser Systemelektrik GmbH

13 Technical data Supply units wall Preferred execution: On-wall In-wall Equipment: equipment mcb elcb water others units on-wall in-wall CEE 16A 5p, 400V CEE 32A 5p, 400V CEE 63A 5p, 400V CEE 16A 3p, 220V Protective contact sockets.16a, 250V 16A, C, 1P 16A, C, 3P 32A, C, 3p 63A, C, 3p 40/0,03A, 4p, Typ A 63/0,03A, 4p, Typ A 63/0,3A 4p, Typ A 100/0,03A 4p, Typ A mains water supply (only as a separate distribution posible) Supply cable: Protection: Connection terminals for: mm2 Loop through possibility: yes no Moser Systemelektrik GmbH 13

14 Market place distributors The stable housing are available either in galvanized, powder-coated sheet steel and in V4A (1.4571) stainless steel. To fix the Marketplace distributor a socket with internal mounting points has been integrated. Cable outlet of the connected cables is also possible with closed door. The door with bar lock consists out of swivelling lever and profile half cylinder. The cable lead-in happens from the bottom (depending on the version, Ø max. 71 mm). The entries and outlets can be equipped individually. A counter device for direct or transformer measurement is available on request. 14 Moser Systemelektrik GmbH

15 Technical data - Market place distributors Equipment: equipment mcb elcb others units CEE 16A 5p, 400V CEE 32A 5p, 400V CEE 63A 5p, 400V CEE 16A 3p, 220V Protective contact sockets.16a, 250V 16A, C, 1P 16A, C, 3P 32A, C, 3p 63A, C, 3p 40/0,03A, 4p, Typ A 63/0,03A, 4p, Typ A 63/0,3A 4p, Typ A 100/0,03A 4p, Typ A Supply cable Protection: Connection terminals for: mm2 Loop through possibility:: yes no Material: Stainless steel Sheet steel powder-coated DB703 RAL/DB Moser Systemelektrik GmbH 15

16 MOSER QUALITÄT Systematic modern connection technology Moser Systemelektrik GmbH stands for innovative connection technology products for use both indoors and outdoors. The main aspects prevailing during development are not only attractive design, functionality but also compliance with all national and international safety regulations. An economical, modern production, high-quality materials and an uncompromising quality assurance ensure reliable products of premium quality. The skills and efficiency of Moser Systemelektrik GmbH are based on the motivation and qualification of our staff and their daily readiness to implement these qualities to the benefit of the customer. Customer satisfaction and the continuous growth of the company are the outcome of the successful symbiosis of competence and quality. You want to learn more about us? We would be pleased to advise you personally. Please contact us. Main office +49 (0) 7722/ moser-systemelektrik.de Sales department Michael Holz +49 (0) 7722/ moser-systemelektrik.de Karl Porsch +49 (0) 7722/ moser-systemelektrik.de Nicole Schneider +49 (0) 7722/ moser-systemelektrik.de Indoor service Tanja Gehring +49 (0) 7722/ moser-systemelektrik.de Export sales department Kim Burger +49 (0) 7722/ moser-systemelektrik.de Checklist public areas / municipality - E - 06/2015 Technical alternations are subject to change without prior notice. Our terms of delivery and payment are in validity. Moser Systemelektrik GmbH Erikaweg 1 D Schönwald Telefon +49(0)77 22/ Telefax +49(0)77 22/ info@moser-systemelektrik.de