NOT CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF NOHSC BFCM01CR, BFCM08CR. Softens cuticles for removal. International Beauty Supplies

Transcription

1 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY Product name Product code Product use Company Address Mango Cuticle Remover BFCM01CR, BFCM08CR Softens cuticles for removal International Beauty Supplies 6e Narabang Way, Belrose NSW, Australia 2085 Telephone number (02) Fax number (02) EMERGENCY TELEPHONE NUMBER James Carroll- General Manager (BH) (02) (AH) HAZARDS IDENTIFICATION Not classified as hazardous according to criteria of NOHSC Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. Not classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations 3. COMPOSITION / INFORMATION ON INGREDIENTS The identity of the individual components of this mixture is proprietary information and is regarded to be a TRADE SECRET. In the event of medical emergency the identity of all the components will be divulged to a qualified professional. Components of this mixture are not found on any known list of carcinogen such as NTP, IARC or by OSHA nor does it contain any carcinogens found in these lists.

2 4. FIRST AID MEASURES Route of exposure - Inhalation - Ingestion - Eye Contact - Skin Contact The approximated vapor pressure of the mixture is NOT sufficiently high enough to be a significant route of entry Rinse mouth with water. Give up to one tumbler (2.20 cups) of milk or water. Obtain medical advice immediately. Liquid may be irritating to eyes. Irrigate with copious amount mild soap and water, if irritation persist obtain medical advice. May be irritating to skin. - First aid facilities - Advice to doctor 5. FIRE-FIGHTING MEASURES Specific hazards Hazardous combustion products Suitable extinguishing media Flash Point deg Celsius Water. Cool fire exposed containers with water Unsuitable extinguishing media Special protective equipment for fire fighters None 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Before cleaning any spill or leak, individuals involved in spill cleanup must wear appropriate Personal Protective Equipment. Flush with water or soak up with suitable absorbent. Contaminated area may be slippery Environmental precautions: Dispose of properly in accordance with local, state and federal regulations. And consistent with good ecological practices.

3 Methods for cleaning up For small spills (e.g., < 5 Liters), wear appropriate personal protective equipment (e.g., goggles, gloves). Maximize ventilation (open doors and windows). Remove spilled material with absorbent material and place into appropriate closed container(s) for disposal. Dispose of properly in accordance with local, state and federal regulations. Wash all affected areas and outside of container with plenty of warm water and soap. Remove any contaminated clothing and wash thoroughly before reuse. For spills 5 Liters, deny entry to all unprotected individuals. Dike and contain spill with inert material (e.g., sand or earth). Transfer product to containers for recovery or disposal and solid dyke material to separate containers for proper disposal. Remove contaminated clothing promptly and wash affected skin areas with soap and water. Keep spills and cleaning runoffs out of municipal sewers and open bodies of water. 7. HANDLING AND STORAGE Handling Avoid eye contact Storage Use and store in a cool, dry, well-ventilated location (e.g., local exhaust ventilation, fans). Do not store in damaged or unmarked containers or storage devices. Keep containers securely closed when not in use. Other information Spilled material may present a slipping hazard if left unattended. Clean all spills promptly. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Respiratory protection: Eye protection: Hand protection Body protection Use NIOSH/MSHA approved respirator if TLV is exceeded. Avoid eye contact. Wear splash proof safety goggles if handling methods warrant them. None required under normal conditions of use None required under normal conditions of use Exposure limits Engineering controls

4 9. PHYSICAL AND CHEMICL PROPERTIES Appearance Liquid Odour Mild Odor PH Vapour pressure N/A Vapour density 1 Boiling point 98 Deg C Melting point N/A Solubility Yes Specific gravity 1.02 Flash point Not Determined Flammability limits lower Not Known Flammability limits upper Not Known Ignition temperature 10. STABILITY AND REACTIVITY Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition products Hazardous reactions This product is stable Presents no significant reactivity hazard None Burning Liberates CO, CO2 and smoke Will not undergo spontaneous exothermic polymerization 11. TOXICOLOGICAL INFORMATION Toxicology data The product has not been tested for specific toxicity data Acute health hazards Ingestion Inhalation Skin Contact Eye Contact Chronic Health Hazards Components of this mixture are not found on any known list of Carcinogen such as NTP, IARC or by OSHA nor does it contain any carcinogens found in these list.

5 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Mobility There is no specific data available for this product There is no specific data available for this product There is no specific data available for this product 13. DISPOSAL CONSIDERATIONS Product and container disposal Dispose of properly in accordance with local, state and federal regulations. Special precautions for landfill or incineration In accordance with local, state, and federal regulations and consistence with good ecological practices. 14. TRANSPORT INFORMATION Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail Not classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations 15. REGULATORY INFORMATION Poisons Schedule AICS Status Labeling Risk phrases Safety phrases

6 16. OTHER INFORMATION Initial preparation date 9 Jan 2006 Amendment date Reasons for change The information provided in this Material Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.end of MSDS.