Test Report. Report No.: EED31H Page 1 of 5

Transcription

1 Report No.: EED31H Page 1 of 5 Client : SHENZHEN BRILLOOP LIGHTING CO., LTD Address : Brilloop 6F, B6 Building, Junfeng Industrial park, Yonghe Road, Fuyong, Bao an, Shenzhen, China Description of the submitted sample(s): Sample Name : Floodlight Model : BLP-FL100W02, BLP-FL100W04, BLP-FL100W05, BLP-FL120W02, BLP-FL120W04, BLP-FL120W05, BLP-FL150W02, BLP-FL150W04, BLP-FL150W05, BLP-FL200W02, BLP-FL200W04, BLP-FL200W05 Trade : Brilloop Ratings : V~, 50Hz, Max.200W Test Item : IP66 Surrounding : 24,58%R.H. Sample Description : Normal Sample Quantity : 1pc Manufacturer : SHENZHEN BRILLOOP LIGHTING CO LTD Sample Received Date : Nov. 27, 2015 Sample tested Date : Dec. 03, 2015 Test Requested : EN :2008+A11:2009, Section 9 Remark : 1) The tested sample(s) and the sample information are provided by the client. 2) All models have the same construction of resistance to dust, solid objects and moisture, the model BLP-FL150W04 is selected to perform the tests. Equipment list: Test Equipment Equipment Model Equipment No. Expiry Date of Calibration Dust Tester KXT1410 TTE Oct. 15, 2016 Spray Nozzle Tester IP-5/IP-6 BTTEELSZ20008 Apr. 21, 2016 Withstanding Voltage Tester TOS5050 TTF Sept. 05, 2016 Temperature & Humidity meter 175H1 TTE Aug. 30, 2016 Stopwatch TF807 BTTEELSZ10019 Oct. 22, 2016 Steel tape 5m ATTEELSZ10027 Oct. 22, 2016 Test Results: Please refer to the next page. Compiled by: Reviewed by: Approved by: Date : Dec. 10, 2015 Amo Liu Lab Supervisor Check No.: Centre Testing International Group Co., Ltd. Hongwei Industrial Zone, 70 Area, Bao an District, Shenzhen, Guangdong, China

2 Report No.: EED31H Page 2 of 5 1. IP6X test 1.1 Test procedure 1) The luminaire is suspended outside the dust chamber and operated at rated supply voltage until operating temperature is achieved. 2) The luminaire, whilst still operating, is placed with the minimum disturbance in the dust chamber. The chamber shall contain 2 kg of powder for every cubic metre of its volume. 3) The fan or blower causing the talcum powder to be in suspension is switched on. 4) After 1 min, the luminaire is switched off and allowed to cool for 3 h whilst the talcum powder remains in suspension. 1.2 Evaluation of test results After completion of the tests, no deposit of talcum powder inside enclosure for dust-tight luminaire. 1.3 Test results: Sample No. Observations Verdict S No deposit of talcum powder inside enclosure for dust-tight luminaire. Pass 2. IPX6 test 2.1 Test procedure 1) Normal operation at rated supply voltage until operating temperature is achieved. 2) The luminaire is switched off and immediately subjected to a water jet for 3 min from all directions by means of a hose having a nozzle with the shade.the nozzle shall be held 3 m away form the sample. 3) The water pressure at the nozzle shall be adjusted to achieve a water flow rate of 100 L/min±5%(approximately 100 KN/m 2 ). 2.2 Evaluation of test results 1) No trace of water on current-carrying parts or SELV parts where the voltage under load exceeds 12 V r.m.s. or 30 V ripple-free dc. or on insulation where it could become a hazard for the user or surroundings. 2) For luminaire without drain holes, where shall be no water entry. 3) After completion of the tests, test samples should withstand electric strength test. 2.3 Test results 1) After the test, no water entered in the luminaire. 2) Electric strength test results: Test voltage Test time Sample No. Between Observations Verdict (V ac) (min) Input and metal No flashover and S Pass enclosure breakdown

3 Report No.: EED31H Page 3 of 5 Photos of the sample Fig.1- Sample photo before test Fig.2- Sample photo before test

4 Report No.: EED31H Page 4 of 5 Fig.3- Sample photo during IP6X test Fig.4- Sample photo during IPX6 test

5 Report No.: EED31H Page 5 of 5 Fig.5- Sample photo after test Fig.6- Sample photo after test *** End of Report *** The test report is effective only with both signature and specialized stamp. The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CTI, this report can t be reproduced except in full.