Intel Non-CPU Component Products IEEE (EPEAT) Declaration

Transcription

1 Intel Non-CPU Component Product IEEE (EPEAT) Declaration Supplier Information Company Name Intel Corporation Contact Title Product Ecology Engineer epone Document ID Contact Phone Company Unique ID Contact Unique ID Authority Dun & Bradtreet epone Date 2016/10/26 Product Information Product Identifier (e.g. Prod Code) Mfr Item Decription Ship eleae Date NUC6I7KYK Intel Skull Canyon NUC-like Mini PC L6 production The following table were filled out uing the direction, below: Column Ye No N/A NE Direction Indicate conformance with the requirement of thi criterion. Indicate NN-conformance with the requirement of thi criterion. Not Applicable -Indicate the criterion ha been reviewed and i not applicable to the item documented. When a criterion ha been marked NA the bai for thi deciion mut be provided. Thi i done by declaring the characteritic of the component that indicate why the criterion doe not apply. Not Evaluated -Indicate the criterion ha not been examined and therefore mut be examined in the final ytem level tet report. Any criterion not completed mut be marked with a NE. Template eviion March 2011 Conform to IEEE Std Page 1 of 9

2 Table 1 EPEAT Aement Criteria for Sect. 4.1 eduction/elimination of Environmentally Senitive Material 4.1 eduction/elimination of Environmentally Senitive Material Criteria Decription Compliance with proviion of European ohs Elimination of intentional ue of Cadmium ( 50 ppm in homogenou material unle due to recycled content) eporting on amount of Mercury ued in light ource Low threhold for amount of Mercury ued in light ource Elimination of intentionally added mercury in light ource Elimination of intentional ue of Lead in certain VDU application Elimination of intentionally added hexavalent chromium ( 500 ppm in homogenou material unle due to recycled content) Elimination of intentionally added SCCP flame retardant and platicizer in certain application Larger (>25g) platic part free of certain flame retardant ( 0.1% total weight claified a dangerou ubtance under ECD 67/548/EEC) Batterie free of Lead, Cadmium and Mercury Large platic part free of PVC greater > 25g (cable and interconnect part are exempt) Ye No NA NE equired () or ptional () NA No light ource NA No light ource NA No light ource NA No light ource Template eviion March 2011 Conform to IEEE Std Page 2 of 9

3 Table 2 EPEAT Aement Criteria for Section 4.2 Material Selection 4.2 Material Selection Criteria Decription Ye No NA NE equired () or ptional () Declaration of pot-conumer recycled platic concentration by weight % (exclude PCB & packaging) Minimum content of potconumer recycled platic > 10% (exclude PCB) Higher content of potconumer recycled platic > 25% (exclude PCB) Declaration of renewable/biobaed platic material concentration by weight % (exclude packaging) Minimum content of renewable/bio-baed platic material > 10% (exclude packaging) Comment 0% N N 0% Declaration of product weight 70g N Template eviion March 2011 Conform to IEEE Std Page 3 of 9

4 Table 3 EPEAT Aement Criteria for Section 4.3 Deign for End of Life (EL) 4.3 Deign for End of Life (EL) Criteria Decription Ye No NA NE equired () or ptional () Identification of material with pecial handling need Platic part >100 g on a product hall not contain paint or coating that are not compatible with recycling or reue, including metal coating External encloure hall be eaily removable by one peron alone with commonly available tool Platic component >100 g hall be marked with a material code in accordance with the identification and marking requirement of IS 11469: Circuit board >10 cm2 (meaured on the larget face), batterie, and other component any of which contain hazardou material hall be afely and eaily identifiable and removable nly one platic material type hall be ued in each platic encloure part >100 g Platic encloure hall not contain molded-in or glued-on metal unle metal inert are eay to remove by one peron alone with commonly available tool Minimum 65% reuable/recyclable Minimum 90% reuable/recyclable All platic part >25 g ued in a product hall be manually eparable by one peron alone with commonly available tool into recyclable rein tream Platic component >25 g hall be marked with a material code in accordance with the identification and marking requirement of IS 11469:2000 No Comment NA No platic part > 100 g NA No platic part > 100 g NA No platic part > 100 g Template eviion March 2011 Conform to IEEE Std Page 4 of 9

5 Table 4 EPEAT Aement Criteria for Section 4.4 Product Longevity / Life Cycle Extenion 4.4 Product Longevity / Life Cycle Extenion Criteria Decription Ye No NA NE equired () or ptional () Additional product warranty or ervice contract of at leat 3 year hall be available for purchae Upgradeable with common tool Applie to: Dektop peronal computer and notebook peronal computer only Product hall have a modular deign; for example, major component/proceor can be changed Spare part and/or compatible replacement part hall be available 5 year after end of production. Information on how to obtain replacement part hall be provided to uer. Ye Comment NE Template eviion March 2011 Conform to IEEE Std Page 5 of 9

6 Table 5 EPEAT Aement Criteria for Section 4.5 Energy Conervation 4.5 Energy Conervation Criteria Decription Ye No NA NE equired () or ptional () All product hall be qualified to or comply with the eligibility criteria of the ENEGY STA program requirement for the declared product at the time of declaration to the tandard. Manufacturer hall declare the verion of ENEGY STA to which the product i qualified or compliant Qualified to ENEGY STA, or compliant with the eligibility criteria of the ENEGY STA program requirement, in advance of the effective date Acceory for powering product uing renewable energy hall be commercially available for purchae with the product. Thi dependent on the region or country and may be declared by a manufacturer differently in different region or countrie Product hall be hipped with a tandard component (either internal or external) that allow for ue of renewable energy to power the product. Thi dependent on the region or country and may be declared by a manufacturer differently in different region or countrie. Comment Ye L6 production No L6 production NE Controlled by. Intel doe not provide NE Controlled by. Intel doe not provide. Template eviion March 2011 Conform to IEEE Std Page 6 of 9

7 Table 6 EPEAT Aement Criteria for Section 4.6 End-f-Life Management 4.6 End-f-Life Management Criteria Decription Ye No NA NE equired () or ptional () Annual corporate declaration criterion: Manufacturer hall provide a take-back or recycling ervice at a competitive price that meet U.S. EPA Plug-In to ecycling: Guideline for Material Management, publihed May Thi applicable only in thoe region or countrie for which the product i declared on the Market Surveillance Entity (MSE ) egitry Annual corporate declaration criterion: An annual audit i performed of all firt, econd, and third tier recycler facilitie; thi enure that the recycler i complying in full with all Plug-In Guideline, a publihed in May 2004, and with any and all applicable regulation and law. Thi dependent on the region or country and may be declared by a manufacturer differently in different region or countrie Annual Corporate Declaration Criterion: Manufacturer hall provide a rechargeable battery take-back ervice at a competitive price that i equivalent to or better than that provided by the echargeable Battery ecycling Corporation (BC) [B5]. In the annual corporate declaration, manufacturer mut explain how the ervice applie to product declared to thi tandard and mut provide information about that ervice. A manufacturer may provide different information for different region or countrie regarding the ervice and how it applie to declared product. Thi criterion i applicable only in thoe region or countrie for which the product i declared on the MSE egitry. NE NE NA Product doe not contain a rechargeable battery. Template eviion March 2011 Conform to IEEE Std Page 7 of 9

8 Table 7 EPEAT Aement Criteria for Section 4.7 Corporate Performance 4.7 Corporate Performance Criteria Decription Ye No NA NE equired () or ptional () Annual corporate declaration criterion: Manufacturer hall demontrate the exitence & public availability of a written corporate environmental policy conitent with all apect of the requirement laid out in the environmental policy ection of IS Annual corporate declaration criterion: EM hall have elf-certified, with or without independent aement, that the EM-owned organization that have ignificant reponibility for the deign and manufacture of the declared product have an operational Environmental Mgt Sytem (EMS) that meet either: - The requirement of IS or Eco-Management and Audit Scheme (EMAS); or - The EMS requirement of the U.S. EPA National Environmental Performance Track program Third-party certified environmental management ytem for deign and manufacturing organization (ee ) Annual corporate declaration criterion: EM hall produce an annual report that meet the firt three reporting requirement of the U.S. EPA National Environmental Performance Track program or the GI Sutainability eporting Guideline (2002). The word corporation may be ubtituted for facility in the requirement Annual corporate declaration criterion: Manufacturer hall produce an annual public report that i baed on, but not limited to, certain element of the GI Sutainability eporting Guideline. An index hall be provided to indicate which portion of the GI Sutainability eporting Guideline are (or not) covered in the report. NE Intel meet, the. NE Intel meet, the. NE Intel meet, the. NE Intel meet, the. NE Intel meet, the. Template eviion March 2011 Conform to IEEE Std Page 8 of 9

9 Table 8 EPEAT Aement Criteria for Section 4.8 Packaging 4.8 Packaging Criteria Decription Ye No NA NE equired () or ptional () eduction/elimination of intentionally added toxic in packaging: Heavy metal hall not be intentionally added to any packaging or packaging component, with the exception of the recycled content exemption cited in eference and detail. For incidental preence, the um of the concentration level of lead, cadmium, mercury, and hexavalent chromium preent in any package or packaging component hall not exceed 100 ppm by weight (0.01%) Separable Packing Material: Product criterion: Non-reuable packaging component larger than 25 g hall be eparable. All the packaging material hall be able to be egregated into like material without the ue of tool (i.e., need to be able to have all the cardboard eparable from the foam that are eparable from the platic bag) Packaging 90% recyclable and platic labeled Manufacturer declare whether packaging contain recycled content or doe not. Manufacturer alo declare approximate recycled content (by weight or volume pecified by manufacturer) Packaging hall meet or exceed the minimum potconumer content for repective packaging in the U.S. EPA CPG over the coure of a year uing a weighted average. See Table 1 within the IEEE Standard Proviion of take-back program for packaging NA Intel meet, but thi the NE Documentation of reuable packaging NE Template eviion March 2011 Conform to IEEE Std Page 9 of 9