Material Safety Data Sheet

Transcription

1 Section 1. Chemical Product and Company Identification Material Safety Data Sheet Product Name: Fallout Remover Version: V5 Effective Date: 17 August, 2012 Supplier/ Manufacturer: Chemfax Products Ltd Street SE Calgary, AB T2C 5C4 Tel: Material Uses Removal of scale and industrial fallout 24 Hour Emergency Canutec (613) WHMIS This product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and the MSDS contains all the information required by the CPR HMIS Ratings for this product are: Health 2, Flammability 0, Reactivity 0 Section 2. Composition and Information on Ingredients Name CAS# % by weight % 1 10 % Balance of ingredients are considered non hazardous and constitute a proprietary blend See Section 8 for information on permissible exposure limits and threshold limit values Section 3. Hazards Identification Physical State and Appearance Hazard Summary Routes of Exposure Potential Acute Health Effects Clear, pale green liquid with a lime scent Corrosive, irritant Skin and eye contact, ingestion Skin: Mildly Corrosive: Will cause drying, redness and potentially mild burns with prolonged contact. Continued on Next Page Chemfax Products Ltd. Page 1 of 5 August 17, 2012

2 Eyes: Mildly corrosive. Will cause irritation and redness, can potentially cause mild burns and permanent damage. Inhalation: Not expected to be harmful by inhalation under normal conditions of use. Ingestion: Corrosive. Will cause irritation and mild burns to digestive tract Medical Conditions known Aggravated by Exposure See Toxicological Information Section 11 Additional Hazard Identification Remarks Section 4. First Aid Measures Eye Contact Skin Contact Inhalation Ingestion Notes to Physician Additional First Aid Remarks Flush eyes with water for 15 minutes. Seek medical attention. Flush area with water. If irritation persists seek medical attention. Launder clothing before reuse. Remove victim to fresh air. If there is difficulty breathing, seek immediate medical attention. Rinse mouth with water if conscious. Do not induce vomiting. Lay victim on left side to prevent aspiration of any vomit. Seek immediate medical attention. Section 5. Fire Fighting Measures Flammability of the Product Flash Point Explosive Limits Auto Ignition Temperature Static Discharge Suitable Extinguishing Media Hazardous Combustion Products Precautions for Fire Fighting Non flammable Use extinguishing media suitable for the surrounding fire Oxides of carbon, sulphur dioxide and trioxide, and potentially ammonia gas Fire fighters should wear self contained breathing apparatus and full protective clothing. Use water spray to cool containers and structures exposed to fire. Chemfax Products Ltd. Page 2 of 5 August 17, 2012

3 Section 6. Accidental Release Measures Personal Precautions Environmental Precautions Methods for Clean Up Gloves, coveralls, safety glasses Do not allow to enter surface drains and storm sewers. Pump or soak up spilt material, place waste product in a suitable container for disposal. Wash area with water to remove residues. Section 7. Handling and Storage Handling Corrosive material. Handle with care. Storage Store in a cool dry place. Keep container closed when not in use. Section 8. Exposure Controls and Personal Protection Exposure Guidelines (applicable for dust) Exposure Controls Personal Protection Respiratory Skin Eyes Other TWA: 8 Hr STEL: 15 min Ceiling IDLH * 1 mg/m 3 2 mg/m mg/m 3 (ACGIH) (ACGIH) Not established * Immediately Dangerous to Life and Health Local exhaust ventilation Product is liquid, aerosol should not be inhaled, respiratory protection should be worn if material is being sprayed Gloves, coverall and footwear suitable for the workplace Safety glasses Section 9. Physical and Chemical Properties Physical State and Appearance Clear, pale green liquid with a lime scent Odour Threshold ph 3 4 Boiling Point Melting Point / Freezing point Evaporation Rate Vapour Density Vapour Pressure Specific Gravity 1.04 Solubility in Water Soluble % Volatile Other Data Chemfax Products Ltd. Page 3 of 5 August 17, 2012

4 Section 10. Stability and Reactivity Chemical Stability Hazardous Polymerisation Conditions to Avoid Materials to Avoid Hazardous Decomposition Products Stable Will not occur known Strong alkalis, oxidising agents and metals May evolve hydrogen gas in contact with metals Section 11. Toxicological Information Principle Routes of Exposure Skin: Eyes: Inhalation: Ingestion: Additional Information Acute Toxicity Mildly Corrosive: Will cause drying, redness and potentially mild burns with prolonged contact. Mildly corrosive. Will cause irritation and redness, can potentially cause mild burns and permanent damage. Not expected to be harmful by inhalation under normal conditions of use. Corrosive. Will cause irritation and mild burns to digestive tract LD50: 7500 mg/kg (Rat, oral) LD50: 475 mg/kg male (Rat, oral, calculated) LD50: 375 mg/kg female (Rat, oral, calculated) LD50: mg/kg (Rabbit, dermal) LD50: 1450 mg/kg (Rat, oral) Chronic Toxic Effects known Carcinogenicity Not listed Reproductive Toxicity / Teratogenicity / Embryotoxicity / Mutagenicity known Section 12. Ecological Information Ecotoxicity BOD and COD Biodegradability / OECD Toxicity of the Products of Biodegradation Special Remarks LC50: 4000 mg/l (Lepomis macrochirus) 24 hr LC50: 14.2 mg/l (Pimephales promelas) 96 hr Chemfax Products Ltd. Page 4 of 5 August 17, 2012

5 Section 13. Disposal Considerations Dispose of in accordance with local, provincial and federal regulations Section 14. Transport Information TDG Classification Corrosive liquid, acidic, organic, N.O.S. (), Class 8, UN 3265, Packing Group III Emergency Response ERG # 153 Guide # Marine Pollutant No Special Precautions Section 15. Regulatory Information Canada DSL Inventory All components of this product are either on the Domestic Substances List (DSL) or Non-Domestic Substances List (NDSL) or exempt TSCA All components of this product are either on the Toxic Substances Control Act (TSCA) Inventory List or exempt WHMIS Hazard Class D2B E Additional Information Section 16. Other Information Prepared by: Chemfax Products Ltd., Technical Department Date Prepared: 27 August, 2009 Revision Date: 17 August, 2012 Disclaimer Notice to reader To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Chemfax Products Ltd. expressly disclaims all expressed or implied warranties of merchantability and fitness for a particular purpose with respect to the product provided. Chemfax Products Ltd. Page 5 of 5 August 17, 2012