STREET LIGHT MODULAR SPECIFICATION

Transcription

1 STREET LIGHT MODULAR SPECIFICATION 1 OF 6

2 1 Dimension Module Quantity Dimension of Lights (L*328*98) Net Weight 1 399*328*98mm 5.3kg 2 484*328*98mm 6.7kg 3 569*328*98mm 7.6kg 4 654*328*98mm 8.6kg 5 739*328*98mm 9.6kg 6 824*328*98mm 11.2kg 2 Application Suitable for the street lighting at highways, urban roads and secondary roads, stadiums, sidewalks, residential areas, industrial areas, squares, parks, schools, villas, gardens and other place 3 Features l high quality power supply, input voltage V. The power efficiency is more than 90%, power factor greater than 0.98, UL or TUV certified Power Supply possible. l Adopting HI power led light sources and ZAG lens technology, 8% light efficiency higher than the same type lights in the market, with higher light transmittance up to 98%. l Duct type thermal design, reduce the weight of the light and ensure good heat dissipation, lower luminous decay, and also extend life span of the leds. Adopting the popular ETS modular design, effectively reduce the following maintenance cost. l Low energy consumption,matching high efficiency constant-current driver, 60% energy

3 saving; with good resistance to over-current, over-voltage, lightning, high temperature, which fully ensure long life span and high stability of the products. l Durable lights with long life span up to hours; No need frequent replacements of lights and regular maintenance. l Green environmental protection, no UV light and infrared radiation, no mercury pollution. l Nice appearance and non-fouling properties, Protection class IP66. l Work without strobe, fast transient response ; l 2pcs 1W chips are packaged in one led, which ensure high stability and also reduce the death rate of the 4 Specification leds. Product Model l Electrical Specifications Module Quantity Power Input Voltage/Frequency Input Current Power Factor Efficiency of the Driver ET-SL W 0.64A/115VAC ET-SL W 0.64A/115VAC ET-SL W 1.2A/115VAC ET-SL W 1.2A/115VAC ET-SL W 1.4A/115VAC AC90~277V ET-SL W 1.7A/115VAC 50/60Hz ET-SL W 1.7A/115VAC ET-SL W 2.1A/115VAC 4 ET-SL W 4A/115VAC ET-SL W 4A/115VAC ET-SL W l Optical Specifications 3.5A/115VAC >0.98/115VAC >0.95/230VAC >93% Product Module Model Quantity Power Luminous Flux Light efficiency CRI CCT ET-SL W 6500LM 130lm/W ET-SL W 7800 LM 150lm/W ET-SL W LM 128lm/W ET-SL W LM 124lm/W K ET-SL W LM 144lm/W > K ET-SL W LM 129lm/W > K ET-SL W LM 124lm/W > K ET-SL W LM 140lm/W K ET-SL W LM 124lm/W ET-SL W LM 124lm/W ET-SL W LM 120lm/W Lens Degree 150 x70

4 l Mechanical Specifications Module The gross Package Size Quantity weight/carton 1 460*388*168mm 6.5kg 2 545*388*168mm 7.8kg 3 630*388*168mm 8.8kg 4 714*388*168mm 9.8kg 5 800*388*168mm 11.2kg 6 885*388*168mm 13.0kg IP Life Span Material of Housing IP hs Aluminum alloy+pc 5 Light Distribution Curve Diagram

5 6 Spectral analysis curve 1. 2 R e l a t i v e I n t e n s i t y v s. W a v e l e n g t h ( T a = 2 5C ) R el a t i ve I nten s i ty K K 3000 K W a v e l e n g t h [ n m ] Luminous Decay Curve At 25,LED working by 3250mA,continually lighting 8 hours a day,the decay curve diagram: L UM 120% 110% 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% I NOU S INT E NSIT % 99.10% 98.30% 97.90% 97.16% 95.24% Y (IV%) LED ON-TIME HOURS 85.95%

6 8 Assembly and Installation l Assembly-Electricity Ø Blue : Neutral Ø Brown : Line Ø Yellow-Green : Ground 9 Operation and Storage Condition l Operation Ambient Temperature -40 to +50 elative Humidity 20~90% l Input Voltage 85~265V AC, 50/60Hz l Storage Ambient Temperature -40 to +85 elative Humidity 10~90% l Mounting Height : Suitable for 5~10m height 10. Informations and Warnings 1. Warranty:5 years warranty 2. When open the package, check the products carefully, please handle with care. 3. For any damage, please keep original packaging and timely contact with us or our legal agent. 4. Please stop using the product if any problem appears. 5. In order to ensure the product work properly, please use the power supply within indicated voltage range. 6. Please install the product in the correct steps; do not touch the lamp when working. 7. Whatever the case, the lamp is not to be insulated liner or similar material covered. 8. Disconnect the power supply when installing or removing the product (and disconnect live wire and null wire), to avoid electric shock. 9. Do not look directly into the LED light source for a long time, high-intensity light may cause eye injury. 10. L amps shall be installed and maintained by a qualified electrician.