Form-I APPLICATION FOR CONSENT FOR EMISSION UNDER SECTION(21) OF THE ACT (SEE CHAPTER-11)

Transcription

1 Form-I APPLICATION FOR CONSENT FOR EMISSION UNDER SECTION(21) OF THE ACT (SEE CHAPTER-11) To THE MEMBER SECRETARY T.S. Pollution Control Board, Paryavaran Bhavan, A3, IE, Sanathnagar, Hyderabad. Sir, I/We apply for CONSENT under section(21) of the Air(Prevention and Control of Pollution)Act,1981(14 of 1981) to make emission from industrial plant owned by (1) or occupied by. (2) Dr S B P P RAMMOHAN for a period upto (3) I/We further declare that the information furnished in the Annexure/Appendices and Plans is correct to the best of my/our Knowledge. (4) I/we hereby submit that in case of change either of the point, or the quantity of emission or its quality a fresh application for CONSENT shall be made and until such consent is granted, no chamnge shall be made. (5) I/We hereby agree to submit to the Board, an application for renewal of CONSENT one month in advance of the date of expiry of the consented period for emission, if to be continued thereafter. (6) I/We undertake to furnish any other information with in one month of its being called by the Board. (7) I/We enclosed here fee details. D.D NO. Bank Name Amount(Rs) SBI (8) The Annexure, appendices, other particulars and plans are attached herewith in triplicate. Signature Name of the applicant: Dr S B P P RAMMOHAN Address of Applicant: Dr.No: 6-151,siddaram road,sathupally

2 ANNEXURE TO FORM - 1 CHIMNEY Note: Any Applicant knowingly giving incorrect information or suppressing any information thereto shall be liable for action under the provisions of the Act. While filling this Annexure the applicant shall for such of the items not pertaining to his activity shall state not applicable against the relevant item and shall not leave it blank. 1. (a) Full name of the applicant with address: Dr S B P P RAMMOHAN (b) Name and Telephone No. of persons incharge of the premises: R.JAGDEESWARARAO, (a) Full name of the industrial plant with address: SRI SARVARAYA SUGARS LTD.,BOTTLING UNIT Dr.No: 6-151,siddaram road,sathupally (b) Full name and address of the occupier (defined in the Act ) as Registered with the Director of Factories & Boilers of the State or with any other competent authority of the state. : 3. Give revenue / city survey number of land/ premises for which the application is made stating District/ Mandal and Village.. (a) Mandal : Dr S B P P RAMMOHAN Egmore, Chennai , India Sathupalli (b) Village : SATHUPALLY (b) Magisterial Jurisdiction of the industry (premises) for purposes of prosecution case under the Act and also the name & address of the Police station under the industry (Premises) falls for all criminal cases connected with the Water Act, 1974 or Air Act, State month and year in which the industrial plant was actually put into commission or is proposed to be put into commission/or the month and year from which the local body is functioning 5. (a) State the civil/military Defence/Industrial Estate etc., under. Whose administrative jurisdiction the occupiers industrial plant is situated. 6. Elevation above mean sea Present use of the Land 8. Indicate the nature of topography Plains Surrounding the site. 9. (a) State whether the industrial plant has been declared as prohibited area. (b) If Yes, State the name of the authority and furnish a certified copy of the order which the area has been declared as prohibited. SATHUPALLY 19/04/2001 Municipality Plains Not-Selected 12th Ethiraj Salai, 10 Which of the following features exist within 20 kilometers radius of the site.: Feature Name Distance(in Km) Crops PADY fields 1 Pond Veshya Kanthala cheruvu Is the industrial plant of the occupier closed on Sunday/Holiday No

3 12. State working season per year of the Industrial plant. From Date Jan To Date Dec 13. Climatological & Meteorological Data (1). Indicate the climatic conditions at the site(eg Arid, Semi Arid etc.): (2). Precipitation, yearly average range: -- Semi Arid (3). Temperature, Seasonal ranges: Avg. Temperature 35 to 38 degrees centigrade; Summer 40 to 48 degree centifrade. (4). Average annual speed and direction of wind Humidity/Solar radiation: Raw material used Sl. No. Description Quantity Units Lt. Preforms (Nos/Annum) Quantities/annum 2. 2 lt Preforms ( Nos/Annum) Quantities/annum 3. Closures(nos/Annum) Quantities/annum 4. Cartons (Nos/Annum) Quantities/annum 5. Concentrate 4.2 Kg/day 6. 1 lt Preforms ( Nos/Annum) Quantities/annum 7. Lables Tons/Annum(TPA) 8. Raw Water Kl/day 15(a) Products /waste material Sl. No. Name of The Product Capacity Units 1. KINLELY PACKAGED DRINKING WATER(500ML,1LT, 2LT PET BOTTLES) 4750 Kl/month 15(b) By-Products /waste material Sl. No. Name of The By-Product Capacity Units 16. Complete flow chart giving description and-chemical process if any as per Annexure-I 17. Fuel Consumption in T/day

4 S.no. Types Daily Consumption in Tonnes Calorific Value Ash Content % Sulphur Content % Other Specify 1. Diesel Furnaces/Cupolas/Boilers/ Stack Name Used for Type of Furnace/cup olas/boilers/ Date of installation Capacity Purpose used Boiler Boilers Fuel 19/10/ Ton Cleaning and Sanitation of the process Equipment Method of Fuel charging in Boilers Oil/gas Burner Quantity of Fuel used in Boilers 60 Lts/Day HSD Fuel 28/01/ KVA In case of power breakdown, self generation of power to prdocution Oil/gas Burner 35 lts/hour HSD Fuel 28/01/ KVA In case of power breakdown, self generation of power to prdocution Oil/gas Burner 25 LTS/Hr 19. Emission control equipment for air pollutants Stack Name Used For Status Not Existing Nature of the Air Pollution Equipme nt Efficienc y Capacity Details of Air pollution Control System Give detailed specificat ions of cyclones, Electro static Precipita tors, Scrubber s, Sag Filters etc. Any other monitori ng facilities available. 20. Atmospheric Emissions (Stacks Details) Stack attached to D.G Set Stack height Gas Quantity (Units) Fuel Gas temprature Are any Standard of Emission prescribed for or adopted by your Industry? Boiler Yes

5 Yes Yes (a) Fuel Gas Emissions Stack Name Used For Type of Fuel C fuel/hr Ash % NOx SO2 HCL CO Particulat e matter Boiler Boilers LDO SET SET HSD HSD 25 NA 0.32 NA NA (b) Atmospheric Emission for Process & Fugitive Sources S.no Stack Name Stack Height(in mtr) Temperature( 'C) Expected Quantity Proposed Air Pollution Control System Are any Standard of Emission prescribed for or adopted by your Industry? (c) Process Emissions Stack Name SO2 CO2 CO NOx Hydrocarbon Particulars specify (d) Particulate analysis Stack Name Chemical composition Give details of Flue gas sampling arrangements Give details of Laboratory facilities available for analysis of emissions Is there sufficient space available for installing Air Pollution Control Equipment Boiler One socket is welded to the stack External laboratory(sv Enviro) is doing monthly basis yes One socket is welded to the stack External laboratory(sv Enviro) is doing monthly basis yes One socket is welded to the stack External laboratory(sv Enviro) is doing monthly basis yes 21. Solid Wastes Nature Quantity Mode of Disposal

6 Scrapped corrugated boxes kgs Authorized vendour Scraped closures 2035 kgs Authorized vendour Scrap Pet material kgs Authorized vendour E-Waste 22 kgs Authorized vendour Discarded Ink cartridges 26 Nos Authorized vendour ETP & WTP sludge from raw water treatment plant Used Carbon Granulas from Raw water treatment plant 100 TPA Send to Brik/Cement Industries/Autorized vendour 1 TPA Send to Brik/Cement Industries/Autorized vendour 22. Any relevant information not covered in the above items : Water Source S.No. Source Type Source Name Quantity 1. Ground Borwell water 1& Average daily consumption of water Sl. No. Purpose Quantity Unit 1. Process KLD 2. Boiler feed/make up.54 KLD 3. Domestic 4.11 KLD 25. Waste Water Discharge : SI.No. Purpose Quantity Units 1 DM plant/regenration/fresh water R.O. plant rejects KLD 2 Domestic 2.5 KLD 26.Treatment Features Before Treatment After Treatment B.O.D C.O.D Suspended Solids Heavy Metals (Specify) <0.01 <0.01 Disloved solids Oil & Grease

7 PH State the total quantity of air handled by ventilation equipment so also specify size and No. of equipments installed to be installed (a) Location and Dimension of Outlets (i) Fuel Gas Emissions Stack Name Type of Fuel Quantity of fuel S % Ash % NOx SO2 HCL CO Particulat e matter (ii) Process Emissions Stack Name SO2 CO2 NOx Hydrocarbons Particulars Specify 28.Give the following details (a) Total investment in the factory and the year of investment. (b) The estimated expenditure for implementing the project (c) Expenditure incurred to date and process achieved (Physical) for air pollution control, if any and the year/years of investments-along with physical process achieved: (d) Annual operation and maintenance of air pollution control plant. (e) Further action that is being taken by the firm to control Air Pollution. 955 Lakhs and Yes 29. Other relevant information : -- Provided acoustic enclosure Place : Date : (Name & Address of the applicant) Signature