TF Threaded filters

Transcription

1 Filter Solutions Pneumatech offers you a comprehensive line-up of innovative filter solutions to meet your specific needs. Our filtration solutions are engineered cost-effectively to provide the best air quality and meet today s increasing quality demands. For general applications we provide oil coalescing, particulate and oil vapor filters in a wide range of flows and pressures. Pneumatech is also your partner for breathing air, silicone-free, sterile & process filtration.

2 TF Threaded filters Features & Benefits Guaranteed air purity High-efficient glass fiber and foam media No risks of: Cracked filter media Cylinder implosion Top cap leakages Oil re-entrainment Significant energy savings Optimal filter media selection allows low pressure losses Highest quality standards In-house research, development & production Each filter subjected to rigorous quality control Fully tested and qualified according to ISO standards Robust design Stainless steel cores guarantee ultimate strength Protection paper to avoid damaging of glass fiber media Anti-corrosive coated filter housing Easy service and installation Push-on filter cartridges elements Different grade, different color Differential pressure gauge on HE range (indicator for sizes 1 to 3) General Specifications Compressed air inlet pressure: 1-16 barg / psig Options Max. ambient air temperature: 66 C / 151 F (35 C / 95 F for V grade) Available grades: P: pre-filter G: fine filter C: super fine filter V: activated carbon filter for oil vapor S: dust filter D: dust filter - high efficient Wall mounting kit Connection kit Potential free contact Zero-loss drain Differential pressure gauge (std. on HE range) 46 TF Threaded filters

3 Pneumatech offers a comprehensive line-up of innovative filter solutions to meet your specific needs. Our state-of-the-art test facility allows to perform all tests according to ISO 8573 & ISO standards in-house. In this way we can optimize and validate our products to the maximum; and bring best-in-class filters to the market. From operations side, we distinct ourselves with our high level of automation and quality control in a triple certified manufacturing environment. A filter is only as good as its weakest link. This explains our choices for two perforated stainless steel filter cores (strength), additional protection layers between filter media and core (no cracks), double O-rings for proper cartridge fixation (no leaks) and epoxy sealed end caps (guaranteed fixation). In this way, we can guarantee the highest air purity at lowest operational costs throughout the entire service life of the filter. Technical specifications for threaded filters TF 1-11 Pneumatech Variant Specifications Nominal (max.) flow rate {1} Max Pressure Units TF 1 TF 2 TF 3 TF 4 TF 5 TF 6 TF 7 TF 8 TF 9 TF 10 TF 11 l/s 10 (12) 20 (25) 30 (45) 40 (65) 60 (90) 110 (160) 160 (215) 220 (265) 320 (360) 450 (525) 600 (690) m 3 /hr 36 (43) 72 (90) 108 (162) 144 (234) 216 (324) 396 (576) 576 (774) 792 (954) 1152 (1296) 1620 (1890) 2160 (2484) cfm 21 (25) 42 (53) 64 (95) 85 (138) 127 (191) 233 (339) 339 (456) 466 (562) 678 (763) 953 (1112) 1271 (1462) barg psig Connection G/NPT ⅜ ½ ½ ¾ & 1 1 1½ 1½ 1½ 2 & 2½ 3 3 Dimensions (A) Dimensions (B) Dimensions (C) Weight mm inch mm inch mm inch Kg Lbs Filter element size Order example: TF 1 C S (super fine filter without differential pressure gauge) TF 1 C HE (super fine filter with differential pressure gauge) 1. Flow is measured at reference conditions: 1 bara and 20 C at operating pressure of 7 barg, inlet temperature 10 C & std PDP of 3 C at the inlet. Filter Elements performance Grades Performance Particle removal efficiency at nominal flow (% at MPPS) "Oil carry-over at nominal flow (mg/m3) " * Oil aerosol content P G C V S D Pre-filter Fine filter - Oil aerosols/ solid particles Super fine filter - Oil aerosols/ solid particles Activated Carbon - Oil vapor Dust filter High efficiency dust filter 92.03% 99.92% 99.98% n/a 99.92% 99.98% <1* <0,07* <0,008* <0,003 n/a n/a Correction factors Inlet pressure (barg) Inlet pressure (psig) Correction factor TF Threaded filters (S & HE) 47

4 FF Flanged Filters Features & Benefits Guaranteed air purity High-efficient glass fiber and foam media No risks of: Cracked filter media Cylinder implosion Top cap leakages Oil re-entrainment Significant energy savings Optimal filter media selection allows low pressure losses Zero-loss electronic drain included as standard Highest quality standards In-house research, development & production Each filter subjected to rigorous quality control Fully tested and qualified according to ISO standards Robust design Stainless steel cores guarantee ultimate strength Protection paper to avoid damaging of glass fiber media Special coating ensures high corrosion protection, and therefore a housing lifetime of at least 20 years Easy service and installation Bottom cover with special rotating system Different grade, different colour Differential pressure gauge, with voltage free contact General Specifications Compressed air inlet pressure: 1-16 barg / psig Zooming in Special rotating system of bottom cover Max. ambient air temperature: 66 C / 151 F (35 C / 95 F for V grade) Available grades: P: pre-filter G: fine filter C: super fine filter V: activated carbon filter for oil vapor S: dust filter D: dust filter- high efficient 48 FF 1-12 (S & HE) - Flanged Filters

5 Pneumatech s flanged filter range contains the same type of robust, high-efficient filter cartridges as the threaded range. The cartridges are contained in a welded steel housing which is pressure-rated up to 16 barg / 232 psig and provided with flanged connections at the compressed air inlet and outlet. The filter housings are completely cleaned, zinc phosphate and KTL coated at the inside and outside and externally painted afterwards. This guarantees a housing lifetime of at least 20 years. All flanged filters are standard equipped with a zero-loss electronic drain and differential pressure gauge with voltage-free contact connections. The special rotating system of the bottom cover makes filter cartridge replacement very straightforward. Technical specifications for flanged filters FF 1-12 Pneumatech Variant Specifications Nominal (max.) Flow Rate {1} Max Pressure Units FF 1 FF 2 FF 3 FF 4 FF 5 FF 6 FF 7 FF 8 FF 9 FF 10 FF 11 FF12 l/s m 3 /hr cfm "550 (630)" 1980 (2268) 1165 (1335) "850 (970)" 3060 (3492) 1801 (2055) 1100 (1260) 3960 (4536) 2331 (2670) 1400 (1600) 5040 (5760) 2966 (3390) 1800 (2200) 6480 (7920) 3814 (4662) 2200 (2400) 7920 (8640) 4662 (5085) 3000 (3600) (12960) 6357 (7628) barg psig Connection DN DN80 DN100 DN100 DN150 DN150 DN150 DN200 DN200 DN250 DN250 DN300 DN300 Dimensions (A) Dimensions (B) Dimensions (C) Weight Number of filter elements Filter element size Order example: mm inch mm inch mm inch Kg Lbs F 2F 2F 2F 2F 2F FF 1 C HE (superfine filter with differential pressure gauge) 2F 2F 2F 2F 2F 2F 1. Flow is measured at reference conditions: 1 bara and 20 C at operating pressure of 7 barg, inlet temperature 10 C & std PDP of 3 C at the inlet. Filter Elements performance P G C V S D Grades Performance Particle removal efficiency at nominal flow (% at MPPS) Oil carry-over at nominal flow (mg/m 3 ) Pre-filter Fine filter - Oil aerosols/ solid particles Super fine filter - Oil aerosols/ solid particles Activated Carbon - Oil vapor Dust filter High efficiency dust filter 92.03% 99.92% 99.98% n/a 99.92% 99.98% <1* <0,07* <0,008* <0,003 n/a n/a * Oil aerosol content Correction factors Inlet pressure (barg) Inlet pressure (psig) Correction factor PF Flanged Filters (S & HE) 49

6 VT - Activated carbon towers + vessels Features & Benefits Guaranteed air purity with residual oil content below 0,003 mg/m³ Superb 2-layer activated carbon material Designed with sufficient safety margin Performance certified by external body Significant energy savings & limited system operating costs Optimal internal flow path Average pressure drop of 125 mbar only Certified class 1 performance, according to ISO :2010 If combined with Pneumatech oil coalescing filters (G & C) Compact and reliable product design Wall-mounting kit, optional for VT1-7 Easy to lift, install and service General Specifications Compressed air inlet pressure: VT 1-9: 1-16 barg / psig VT with optional oil indicator: 1-8,8 barg / psig Ambient air temperature: C / F Compressed air inlet temperature : 1-66 C / F Options Wall mounting kit Oil Indicator Dust filter 50 VT - Activated carbon towers + vessels ISO :2010 Class 1 validation certificate

7 Pneumatech s VT activated carbon towers and vessels are high-efficiency filtration products designed to meet the most demanding industry applications. Examples are pharmaceutical, medical, food & beverage, electronics and chemical industries. The VT is capable of removing hydrocarbons, odors and oil vapors from compressed air. The activated carbon layers will, by the use of adsorption, reduce the residual oil content to less than 0,003 mg/m 3. In combination with Pneumatech G and C filters, the VT meets the requirements of air purity class 1 for total oil, according to ISO :2010 in a typical compressed air installation, as was certified by an external body. Technical specifications for VT 1-9 Pneumatech Variant Specifications Units VT 1 VT 2 VT 3 VT 4 VT 5 VT 6 VT 7 VT 8 VT 9 l/s Capacity {1} m 3 /hr cfm Initial pressure drop over filter when dry BARG 0,015 0,065 0,11 0,085 0,135 0,1 0,145 0,185 0,27 Connection G/NPT ½ ½ 1½ 1½ 1½ 1½ Dimensions (A) Dimensions (B) Dimensions (C) Weight mm inch mm inch mm inch Kg Lbs Flow is measured at reference conditions: 1 bara and 20 C at operating pressure of 7 barg, inlet temperature 20 C & inlet PDP of 3 C at the outlet. Correction factors For other compressed air inlet temperatures, please multiply the filter capacity by the following correction factor (Kt): Inlet temperature C F Correction factor Kt Correction factors For other compressed air inlet pressures, please multiply the filter capacity by the following correction factor (Kp): Inlet pressure barg psig Correction factor Kp Activated carbon vessels for higher flows available on request. Please consult Pneumatech for further support. VT - Activated carbon towers + vessels 51

8 H - High Pressure Filters Features & Benefits High reliability High-performance aluminum or stainless steel housings to withstand ultimately high operational pressures Double O-rings, epoxy sealed caps and anti-corrosive coated filter housing Maximum contaminant removal Removal of dry and wet dust, particulates, oil aerosol and water droplets High-efficiency glass fiber and fleece media Significant energy savings & limited system operating costs Optimal design and filter media allow for low pressure drops Easy to service Cartridge color based on type of filtration grade, makes it easy to service General Specifications Operating pressures: barg / psig Operating temperature range: C / F (for grades S, D, G & C) 0-35 C / F (for grade V) Available grades: G: general oil coalescing filtration (max oil carry-over: 0,08 mg/m³) C: fine oil coalescing filtration (max oil carry-over: 0,007 mg/m³) S: general dust filtration (99,92% at MPPS) D: fine dust filtration (99,98% at MPPS) V: oil vapor filtration (max oil carry-over: 0,003 mg/m³) Inlet and outlet connections: threaded Housing material: Aluminum (50 barg / 725 psig only) or stainless steel (complete range) Applications Laser cutting PET bottling Pressure testing of components High-pressure die casting Autoclave 52 H - High Pressure Filters

9 Pneumatech s high pressure filters are engineered to cost effectively provide the best air purity and meet today s increasing quality demands up to working pressures of 350 barg/5075 psig. All high pressure filter housings are hydraulically tested to ensure safe and reliable operation at all times. The hydrostatic test certificate is supplied with every filter. The high pressure filters are available in 3 pressure ranges. The 50 barg (725 psig) range is available in both aluminum and stainless steel housings. As the performance of both filters is the same, the choice between the 2 can be made based on the customer s preference. The 100 barg (1450 psig) and 350 barg (5075 psig) filters are available in stainless steel housings. Technical specifications for HP barg Aluminium Filters Technical specifications for HP barg Stainless Steel Pneumatech Variant Specifications Units Pneumatech Variant Specifications Units l/s l/s Capacity {1} m 3 /hr Capacity {1} m 3 /hr cfm cfm Connection BSP ¼ 3/8 ½ ¾ 1 1½ 1½ 2 2 Connection BSP ¼ 1/2 ¾ 1 1 1½ 2 Dimensions (A) mm inch Dimensions (A) mm inch Dimensions (B) mm inch Dimensions (B) mm inch Weight Kg Lbs Weight Kg Lbs Technical specifications for HP barg Stainless Steel Technical specifications for HP barg Stainless Steel Pneumatech Variant Specifications Units Pneumatech Variant Specifications Units l/s l/s Capacity {1} m 3 /hr Capacity {1} m 3 /hr cfm cfm Connection BSP ¼ 3/8 ½ ¾ 1 1½ 2 2 Connection BSP ¼ ¼ ½ ¾ 1 1 Dimensions (A) mm inch Dimensions (A) mm inch Dimensions (B) mm inch Dimensions (B) mm inch Weight Kg Lbs Weight Kg Lbs Correction factors: 50 barg Aluminum & Stainless Steel Operating pressure Correction factor barg psig Kp Correction factors: 100 barg Stainless Steel Operating pressure Correction factor barg psig Kp Correction factors: 350 barg Stainless Steel Operating pressure Correction factor barg psig Kp Flow is referred to an absolute pressure of 1 barg and temperature of 20 C H - High Pressure Filters 53

10 SLF - Silicone Free Filters Features & Benefits Guaranteed silicone-free Plasma-cleaned O-rings, diaphragms & gaskets Metallic cylinders, housing components and fasteners washed at 80 C / 176 F Certificates delivered with SLF filters Maximum contaminant removal Removal of dry and wet dust, particulates, oil aerosol and water droplets High-efficiency glass fiber and fleece media Significant energy savings & limited system operating costs Optimal design and filter media allow for low pressure drops High reliability High-performance stainless steel cores, double O-rings, epoxy sealed caps and anti-corrosive coated filter housing General Specifications Operating pressure range: 2-16 barg / psig Operating temperature range: 0-66 C / F (for grades S, D, G & C) 0-35 C / F (for grade V) Available grades: G: general oil coalescing filtration (max oil carry-over: 0,1 mg/m³) C: fine oil coalescing filtration (max oil carry-over: 0,01 mg/m³) S: general dust filtration (99,81 % at MPPS) D: fine dust filtration (99,97 % at MPPS) V: oil vapor filtration (max oil carry-over: 0,003 mg/m³) Inlet and outlet connections: threaded Zooming in Avoid paint defects Avoid blisters Avoid poor adhesion Avoid craters 54 SLF - Silicone Free Filters

11 The SLF filters are free from substances that could cause defects in the paint. The filters are manufactured in a controlled environment that ensures silicone is not present on the components used or introduced in the production process. All filters are subject to dimensional inspection, pressure & performance testing and a paint compatibility test. SLF filters are available in 5 grades, which efficiently prevent dry and wet dust, oil aerosol, oil vapor and water drops from entering your compressed air system. Technical specifications for SLF Silicone-free filters Pneumatech Variant Specifications Units SLF 1 SLF 2 SLF 3 SLF 4 SLF 5 SLF 6 SLF 7 SLF 8 SLF 9 SLF 10 SLF 11 l/s Nominal flow {1} m 3 /hr cfm Connection G/NPT 3/8" 1/2" 1/2" 3/4" & 1" 1" 1-1/2" 1-1/2" 1-1/2" 2" & 2-1/2" 3" 3" Dimensions (A) Dimensions (B) Dimensions (C) Weight mm inch mm inch mm inch Kg Lbs Flow measured at reference conditions of Nominal pressure: 7 barg(e)/102 psig; temperature: 20 C, 68 F. Correction Factors Inlet pressure barg Inlet pressure psig Correction factor C B A SLF - Silicone Free Filters 55

12 FP & FP HP - Process Filters (incl. high pressure) Features & Benefits Enhanced stainless steel (1,4301) filter housing Designed for applications with high risk of corrosion High hygiene standards Advanced filter cartridge design High filtration efficiency Guaranteed performance over the entire lifetime Low pressure drop Ultimate strength 100% integrity tested (DOP test) All components meet the FDA requirements for contact with food in accordance with the Code of Federal Regulations (CFR), title 21. Wide range of cartridges to suit application needs General Specifications: FP 1-18 Stainless Steel Process Filters Operating Pressure: barg / psig Operating temperature range 1 : C / F Body Connections: DIN (Milk pipe connections) Surface Finish: Ra 1.6, electro-polished Inlet and outlet Connections: Threaded and flanged. 1 Operating temperature range can vary as per the filter element used. General Specifications: FP HP 1-8 High Pressure Stainless Steel Process Filters Operating Pressure: 50 barg / 725 psig Operating temperature range 1 : C / F Body Connections: DIN (Milk pipe connections) Surface Finish: Ra 1.6, electro-polished Inlet and outlet Connections: threaded (and flanged from FP 13 onwards) 1 Operating temperature range can vary as per the filter element used. 56 FP & FP HP - Process Filters (incl. high pressure)

13 In process industries where the risk of corrosion of the compressed air system components is high, Pneumatech s FP 1-18 process filter range provides the right solution. The filter housing is made out of stainless steel grade 1,4301. The surface has been smoothened with advanced mechanical and electro-polishing techniques to a level of Ra 1,6. To avoid micro-organism contamination between the filter head and bowl, these are connected by a milk pipe connection as per DIN The filter cartridges are available in 4 different filtration grades for a wide variety of applications. All cartridges have been extensively tested to guarantee the best filtration efficiency over the entire cartridge lifetime. Technical Specifications FP 1-18 Pneumatech Variant Specifications Units FP 1 FP 2 FP 3 FP 4 FP 5 FP 6 FP 7 FP 8 FP 9 FP 10 FP 11 FP 12 FP 13 FP 14 FP 15 FP 16 FP 17 FP 18 Flow 1 m 3 /hr cfm Operating barg/ Pressure psig 16/232 16/232 16/232 16/232 16/232 16/23216/232 16/232 16/232 16/232 12/174 12/174 10/145 10/145 10/145 10/145 10/145 10/145 Connections Inch 1/4 3/8 1/2 3/ /4 1 1/ /2 3 3 DN100 DN100 DN150 DN150 DN200 DN200 A (mm) A (inch) B (mm) Dimensions B (inch) C (mm) C (inch) D 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/ Mass Kg Lbs Flow is measured at Reference Conditions: 1 bara and 20 C Technical specifications for FP HP 1-8 Pneumatech Variant Specifications Units FP HP 1 FP HP 2 FP HP 3 FP HP 4 FP HP 5 FP HP 6 FP HP 7 FP HP 8 1 m 3 /hr Flow cfm Operating Pressure barg/psig 50/725 50/725 50/725 50/725 50/725 50/725 50/725 50/725 Connections Inch 1/2 3/ /4 1 1/ A (mm) A (inch) B (mm) Dimensions B (inch) C (mm) C (inch) D 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Mass kg Lbs Flow is measured at Reference Conditions: 1 bara and 20 C Correction factors Operating pressure barg psig Correction factor Kp 0,38 0,5 0,63 0,75 0,88 1 1,13 1,25 1,38 1,50 1,63 1,75 1,88 2,00 2,13 2,63 3,88 5,13 6,38 FP & FP HP - Process Filters (incl. high pressure) 57

14 FS - Sterile Filters Features & Benefits Enhanced high-grade stainless steel filter housing Designed for applications with high risk of corrosion High hygiene standards thanks to sanitary couplings Advanced filter cartridge design High microbiological filtration efficiency Designed to withstand a large number of sterilization cycles thanks to silicon bonded joint and additional NOMEX layer Stainless steel cylinders and end-caps Low pressure drop 100% integrity tested (DOP test) All components meet the FDA requirements for contact with food in accordance with the Code of Federal Regulations (CFR), title 21. General Specifications Operating Pressure: barg / psig Operating temperature range 1 : -20 C to 150 C / -4 F to 302 F Side Connections : DN10 to DN200 sanitary flange (ISO) Surface Finish : Ra 0.8 Body Connections: Sanitary tri clamp 1 Operating temperature range can vary as per the filter element used. 58 FS - Sterile Filters

15 Pneumatech s FS filters are designed for compressed air and gas applications that need to be free from microbiological contamination, and can thus be sterilized regularly. Pneumatech s FS filter housings are made out of stainless steel grade 1,4301, with a surface that has been smoothened to a level of Ra 0,8. The upper and bottom filter parts are connected by a sanitary tri clamp fitting; and the side connections are made out of sanitary ISO flanges. As a result, there is no void inside the entire filter housing; and thus no risk of micro-organism contamination. The filter elements are manufactured with silicon as bonded joint to ensure robustness at high operating and sterilization temperatures. For the same reason, an additional NOMEX layer is used at the inside and outside of the filter element. The filter cylinders and end-caps are made out of stainless steel. This all results in a highly efficient and exceptionally strong filter, which keeps its performance after a large number of sterilization cycles. Technical specifications for FS 1-16 Pneumatech Variant Units FS HE 1 FS HE 2 FS HE 3 FS HE 4 FS HE 5 FS HE 6 FS HE 7 FS HE 8 FS HE 9 FS HE 10 FS HE 11 FS HE 12 FS HE 13 FS HE 14 FS HE 15 FS HE 16 l/s Flow {1} Operating Pressure Connections m 3 /hr cfm ,413 2,966 3,955 5,650 7,910 10,124 12,431 barg/ psig Inch 16/232 16/232 16/232 16/232 16/232 16/232 16/232 16/232 16/232 16/232 10/145 10/145 10/145 10/145 10/145 10/145 DN10/ ø17,2 DN10/ ø17,2 DN15/ ø21,3 DN15/ ø21,3 DN25/ ø35,7 DN32/ ø42,4 DN40/ ø48,3 DN50/ ø60,3 DN65/ ø76,1 DN80/ ø88,9 DN100 DN100 DN150 DN150 DN200 DN200 A (mm) A (inch) B (mm) Dimensions B (inch) C (mm) C (inch) D (mm) E (inch) 1/8 1/8 1/8 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/ Mass Kg Lbs Flow is measured at Reference Conditions: 1 bara and 20 C Correction factors Operating pressure Correction factor barg psig Kp 0,38 0,50 0,63 0,75 0,88 1 1,13 1,25 1,38 1,50 1,63 1,75 1,88 2,00 2,13 FS - Sterile Filters 59

16 TF DC - Filters with Desiccant Cartridges General Specifications Pressure dew point: -40 C Max working pressure: 16 barg / 232 psig Operating temperature range: 1,5 45 C / F The TF DC consists of a desiccant-filled cartridge, fit inside the standard Pneumatech filter housing. The desiccant dries the compressed air down to -40 C / -40 F but only has a limited lifetime, as it is not regenerated. The DC is therefore meant to dry small amounts of temporarily required compressed air; or as a safety filter downstream the main dryer. The integrated dust filter collects any dust particles from the desiccant, making downstream dust filtration unnecessary. As with adsorption dryers, upstream oil coalescing filters are recommended to avoid that oily contaminants would stick to the desiccant. Technical specifications for Desiccant Cartridges Filter Cartridge Size element Specifications Unit TF 2 DC TF 4 DC TF 5 DC TF 6 DC TF 7 TC TF 8 DC m 3 /hr 0,2 0,7 1 3,7 4,2 5 cfm 0,12 0,41 0,59 2,18 2,47 2,94 m Ft 3 185,9 647,8 907,4 2898,5 3320,2 4029,6 Connections inch 1/2" 3/4" 1" 1 1/2" 1 1/2" 1 1/2" Molecular Sieves Mass kg 0,056 0,196 0,278 0,878 1,02 1,201 Lbs 0,12 0,43 0,61 1,94 2,25 2,65 1. Refers to 10s contact time at 7 barg operating pressure and 20 C. 2. Refers to 20 C inlet temperature, 100% relative humidity and 20% wt desiccant load capacity. Correction factor Operating pressure Pressure correction factor barg psig Kp Correction factor C Operating Temperature F Kt TF DC - Desiccant Cartridges

17 TF CC & TF HC - filters with Activated Carbon & Hopcalite cartridges The cartridge-concept of the Desiccant Cartridges is also applied to activated carbon and hopcalite materials. The activated carbon cartridge can be considered an intermediate solution between the carbon impregnated cartridge (V) and the activated carbon towers (VT). It provides thus a compact oil vapor filtration solution, albeit with a longer service life than the V filter. Hopcalite is a catalyst which converts carbon monoxide into carbon dioxide. It is often used in breathing air applications to bring the carbon monoxide concentration below the prescribed thresholds of 15 ppm according to EN and 5 ppm according to the European Pharmacopeia. Both solutions include an integrated dust filter. The correct filter sizing is usually based on the requested pressure drop over the filter. General Specifications Max working pressure: 16 barg / 232 psig Operating temperature range: 1,5 45 C / F Service life: Dependent on inlet concentration please consult Pneumatech for further support. Technical specifications for Activated Carbon Cartridges Filter grade Specifications Unit TF 2 CC TF 4 CC TF 5 CC TF 6 CC TF 7 CC TF 8 CC Flow Capacity m 3 /hr cfm Connections inch 1/2" 3/4" 1" 1 1/2" 1 1/2" 1 1/2" Pressure Drop at Nominal Flow Activated Carbon Mass mbar psig 1,16 1,60 1,74 6,09 10,59 20,31 kg 0,04 0,14 0,199 0,627 0,729 0,858 Lbs 0,1 0,3 0,4 1,4 1,6 1,9 1. Flow refers to 1 barg and 20 C at 7 barg operating pressure. Technical specifications for Hopcalite Cartridges Filter grade Specifications Unit TF 2 HC TF 4 HC TF 5 HC TF 6 HC TF 7 HC TF 8 HC Flow Capacity m 3 /hr cfm Connections inch 1/2" 3/4" 1" 1 1/2" 1 1/2" 1 1/2" Pressure Drop at Nominal Flow Hopcalite mass mbar psig 1,16 1,60 1,74 6,09 10,59 20,31 kg 0,073 0,252 0,358 1,129 1,312 1,544 Lbs 0,2 0,6 0,8 2,5 2,9 3,4 1. Flow refers to 1 barg and 20 C at 7 barg operating pressure. Correction factor Operating pressure Pressure correction factor barg psig Kp TF CC & TF HC - filters with Activated Carbon & Hopcalite cartridges 61

18 BREATHBOX - Portable breathing air system Features & Benefits High quality breathing air for up to 5 people Based on conservative peak inhalation rate of 15,1 m³/hr / 8,9 cfm per person, as defined by BS 4275:1997 Rigorous air quality monitoring Continuous measurement of CO, CO 2 and O 2 concentrations Compliance with EN and BS 4275:1997 Alarm triggering when air quality does not comply with the standards Gas analyzers approved and certified as per various certification bodies and standards Advanced filter design Highly reliable filter cartridges Ensuring ISO :2010 Class 1:x:1 Plug and play portable design Small footprints and low weight design Easy installation with quick couplings General Specifications Operating Pressure: 0-16 barg / psig Operating temperature range: C / F Inlet and outlet connections : Quick coupling DN 7,2 (inlet-male, outlet-female) Electrical Connections : 230 VAC / 110 VAC / 9 VDC to 24 VDC Power consumption: < 10W 62 BREATHBOX - Portable breathing air system

19 Are you looking for a portable, easy-to-use and reliable breathing air solution? Pneumatech s BREATHBOX can safely provide high-quality breathing air for up to 5 people. The BREATHBOX consists of a 5-stage filter train, combined with gas concentration analyzers, a pressure regulator and quick couplings, all packed in a compact and robust casing. The 5-stage filter train includes: High-efficiency oil coalescing filter Oil vapor removal filter with activated carbon pellets Integrated particle removal filters to remove all activated carbon dust particles Hopcalite catalyst to convert carbon monoxide into carbon dioxide Integrated high-efficiency particle removal filter to remove hopcalite dust particles Gas concentration analyzers monitor CO, CO 2 and O 2 concentrations at all times, and trigger an alarm if concentrations exceed the values described in EN12021 and BS4275:1997. The BREATHBOX is easy to transport, install and use; and can therefore be used in a wide range of applications, such as shotblasting, tank cleaning, spray painting and manufacturing. Technical Specifications for Breathbox Flow rate {1} (7bar, 20 C) m³/hr 120 cfm 71 1 st filtration stage Oil aerosol filtration down to < 0,01 mg/m³ 2 nd filtration stage Oil vapor filtration down to < 0,005 mg/m 3 with integrated particle filter 3 rd filtration stage CO removal, with integrated particle filter CO monitoring Warning 3 ppm, alarm 5 ppm CO 2 monitoring Alarms (increasing intensity) at 500 ppm/1500 ppm O 2 monitoring Alarm at O 2 concentration <19,5% Protection class of analysers IP65 Weight kg 12 Lbs Flow refers to 1 barg and 20 C at 7 barg operating pressure. BREATHBOX 63

20 Competitor spare parts - Alternative line filter cartridges Features & Benefits Guaranteed performance Filter media selected to offer low differential pressure, high oil removal efficiencies and proven continuous performance Performance equal to or superior than the original Robust design Perforated support cylinders made from corrosion resistant stainless steel, which is twice as strong as galvanized steel Protection layers to protect the glass fiber media from being damaged by the metal cores Guaranteed interchangeability Designed to fit into the original housing Tested in more than filters in the field Quality Control Full traceability by ink jet marking specific codes on every filter element complying with our IOS 9001 manufacturing procedures Brands Domnick Hunter Zander Donaldson Ultrafilter Hydrovane Hiross Hankison (SPX) Deltech (SPX) CTA Bea Filtri Dollinger (SPX) Finite Kaeser CompAir Ingersoll Rand Parker Balston Sullair FST And many more 64 Competitor spare parts - Alternative line filter cartridges

21 Pneumatech offers superior quality alternative line filters for all major brands including Domnick Hunter, Zander, Donaldson and many more. We can supply filtration solutions for any grade or class of air quality to suit all air compressor needs. Pneumatech s high quality filter elements use the latest filter media technology and fit seamlessly into OEM machines and housings. There is no need for modification kits or adapters. The elements offer unrivaled reliability and operate with minimal pressure drop, delivering optimum energy efficiency. All our brand alternatives are tested in accordance with ISO to guarantee exceptional performance. The filters are extensively tested in the field without any performance issues. Alternative Element Analysis Gereral Purpose: 1 micron Pneumatech Alternative Original Manufacturer Alternative Element Analysis High Efficiency: 0.01 micron Pneumatech Alternative Original Manufacturer Manufacturer A Manufacturer B Manufacturer A Manufacturer B Manufacturer C Manufacturer D Manufacturer C Manufacturer D % Oil Removal Performance % Oil Removal Performance Original: wet Pneumatech Alternative: wet Grade G C S D V Filter type General oil coalescing Fine oil coalescing General dry dust Fine dry dust Oil vapor Maximum oil carryover (68 0 F / 20 0 C) Pressure loss clean and dry 0.5 mg/m mg/m mg/m 3 1 psig <70 mbar 2 psig < 140 mbar 1 psig < 70 mbar 2 psig < 140 mbar - Wet pressure drop 2 psig < 140 mbar 3 psig < 200 mbar Maximum temperature F C F C F C F C F 50 0 C Competitor spare parts - Alternative line filter cartridges 65

22 Competitor spare parts - Alternative desiccants Features & Benefits All types of desiccants, matched to the OEM performance Acticated alumina Silicagel Molecular sieves Activated carbon Adsorption dryers can only be energy efficient if they contain premium desiccant material. The desiccant used in Pneumatech adsorption dryers is carefully selected from a wide range of European and North-American suppliers; and is suitable for all OEM machines including Domnick Hunter, Donaldson, Boge, Ingersoll Rand, Compair, Kaeser, Almig and many more. High-quality supply at the lowest cost Lowest total cost of ownership Highest crushing resistance Limited anti-aging effect Why choose Pneumatech for alternative spare parts? Excellent customer service Over parts available Same day shipping World class logistics Full track and trace of all shipments Competitive pricing & flexible discounts Customized labelling Brands Domnick Hunter Zander Donaldson Ultrafilter Hankison (SPX) Deltech (SPX) CTA Dollinger (SPX) Kaeser CompAir Ingersoll Rand Boge Almig FST KSI Parker Balston And many more 66 Competitor spare parts - Alternative desiccants

23 Protect the environment treat your condensate As efficient as the process may be, a compressor inevitably produces more than compressed air alone. One of its by-products is a large volume of condensate, generally an emulsified combination of oil and water that poses a serious environmental risk. Only by treating this condensate in the right way, we can make sure it brings no harm to the environment. Depending on the location, severe penalties can be charged for dumping oily condensate in the sewage system. The legal threshold of the maximum oil concentration in water varies strongly depending on continent, country and even local region. However, the maximum allowable oil content in drainage to the sewage generally varies between 15 and 20 mg/l