EYES: May cause eye irritation. Toxicological properties of this material have not been fully investigated.

Transcription

1 FINALUX G-748 Section1. Product and Company Identification PRODUCT NAME : FINALUX G-748 GENERAL USE : Processing aid for Plastics PRODUCT FORMULATION NAME : Saturated fatty acid derivative CHEMICAL FAMILY : Fatty acid derivatives GENERIC NAME : Saturated fatty acid ester MANUFACTURER: FINE ORGANIC INDUSTRIES PVT LTD. FINE HOUSE, ANANDJEE STREET Off. M. G. ROAD, GHATKOPAR (EAST) MUMBAI (INDIA). Tel.: Fax: , info@fineorganics.com Section 2. Hazards Identification EMERGENCY OVERVIEW PHYSICAL APPEARANCE : solid CAUTION: The toxicological properties of this material have not been fully investigated. May cause eye and skin irritation. May cause respiratory and digestive tract irritation. SIGNS AND SYMPTOMS OF OVEREXPOSURE EYES: May cause eye irritation. Toxicological properties of this material have not been fully investigated. SKIN: May cause skin irritation. Toxicological properties of this material have not been fully investigated. INGESTION: May cause irritation of the digestive tract. Toxicological properties of this material have not been fully investigated. INHALATION: May cause irritation of the respiratory tract. Toxicological properties of this material have not been fully investigated. CHRONIC: No information is available. 1

2 Section 3. Composition, Information on Ingredients Chemical Name EINECS CAS# Saturated fatty acid derivative (AS DEFINED BY OSHA HAZARD COMMUNICATION STANDARD, 29 CFR ) Section 4. First Aid Measures EYES: Immediately flush eyes with plenty of water. Remove any contact lenses and continue flushing for 15 minutes occasionally lifting the lower and upper eye lids SKIN: Wash affected area with plenty of soap and water while removing contaminated clothing and shoes. Wash clothing before reuse. INGESTION: Never give anything to an unconscious person. Seek immediate medical attention. Do not induce vomiting. If conscious, rinse mouth and drink 2-4 cupfuls of milk or water. INHALATION: Remove from further exposure. If vapors or mist cause irritation or distress, remove to fresh air. Give oxygen or apply artificial respiration. Note to physician: Treat symptomatically and supportively. Section 5. Fire Fighting Measures FLASHPOINT AND METHOD FLAMMABLE LIMITS AUTOIGNITION TEMPERATURE : >240 C Penskey-Martens Closed Cup : No data Available GENERAL HAZARD: Evacuate personnel downwind of fire to avoid inhalation of Irritating fumes and smoke. Wear self-contained breathing apparatus in pressure demand mode MSHS / NIOSH (approved or equivalent) and full protection gear. During the fire highly irritating or toxic gases may be generated due to combustion or thermal decomposition. EXTINGUISHING MEDIA: Dry chemical, CO 2 on small fires. Use foam (alcohol, polymer or ordinary) and water spray for large fires. HAZARDOUS COMBUSTION PRODUCTS: carbon monoxide and carbon dioxide from burning. FIRE FIGHTING PROCEDURES: This product is a nonflammable substance. However, hazardous decomposition and combustion products may be formed in a fire situation. Fire fighters should wear self-contained breathing apparatus and protective clothing. 2

3 SENSITIVITY TO STATIC DISCHARGE SENSITIVITY TO IMPACT NFPA RATING (Estimated) : Health: 1, Flammability: 0, Reactivity : 0 Section 6. Accidental Release Measures General Information : Use appropriate person protective gear as indicated in section 8 Spillage and leaks : Vacuum and sweep-up material and dispose into suitable disposal container. Clean-up spill immediately, observing precautions in the protective equipment section. Avoid generating dusty conditions. Provide ventilation. Section 7. Handling and Storage HANDLING : Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Clean-up spills immediately, observing precautions in the protective equipment section. Avoid generating dusty conditions. Provide ventilation. STORAGE : Store in unopened tightly closed containers under cool and dry conditions in a well ventilated areaway from incompatible substances. Section 8. Exposure Controls, Personal Protection ENGINEERING CONTROLS : Use adequate ventilation to keep airborne concentrations low. PERSONAL PROTECTIVE EQUIPMENT EYES AND FACE PROTECTIVE CLOTHING RESPIRATORY PROTECTION WORK HYGIENIC PRACTICES : Wear a full-face shield or goggles when handling. : Use gloves : Ordinarily not needed. : Use in a manner consistent with good Industrial/manufacturing techniques and practices. Exposure Limits: The ingredients of this product are not listed as ACGIH, NIOSH or OSHA as hazardous substance. 3

4 Section 9. Physical and Chemical Properties PHYSICAL STATE : Solid ODOR : Characteristic APPEARANCE : Powder COLOR : White VAPOR PRESSURE : <1 (mm O C) DCOMPOSITION TEMPERATURE : >200 O C FREEZING POINT SOLUBILITY IN WATER (% wt) : Insoluble MELTING POINT : 63 ± 5 O C Section 10. Stability and Reactivity STABLE : Product is stable under normal conditions of temperature and pressure. HAZARDOUS POLYMERIZATION : Will not occur INCOMPATIBLE MATERIALS CONDITIONS TO AVOID : Strong oxidizing agents. : Incompatible substances, dust generation, excess heat, strong oxidizers. Section 11. Toxicological Information ACUTE MUTAGENICITY REPRODUCTIVE EFFECTS TERATOGENIC EFFECTS LD 50 (rats) : No data available : Data not available. Section 12. Ecological Information & Environmental Precautions Eco-toxicological information is not available. This product does not contain any chemical subject to the reporting requirements of section 313 of title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372 4

5 Section 13. Disposal Considerations DISPOSAL METHOD : Dispose of waste at an appropriate waste disposal facility according to current applicable Federal or state or local laws and regulations. Chemical waste generators must determine whether a discarded chemical is classified a hazardous chemical. US EPA guidelines described under 40 CFR Parts does not de-regulate this substance. RCRA P series : None listed RCRA U series : None listed Section 14. Transport Information Labelling: European Directive 88/379/EEC According to our data the product is not harmful within the meaning of this directive. Section 15. Regulatory Information Classification according to European Directive 90/492/EEC on Hazardous preparations: Contains: PETS Risk Phrase & Hazard symbol: Not available Safety Phrase and Symbol: None Section 16. Other Information Inventory Status: TSCA (TOXIC SUBSTANCE CONTROL ACT) : significant New Use rule: Chemicals under this formulation have an SNUR under TSCA SARA section 203 (RQ): None of the chemicals in this formulation have an RQ. Section 302 (TPQ) : None of the chemicals in this formulation have a TPQ. Clear Air Act: This material does not contain any hazardous air pollutants. Clean Water Act: None of the chemicals in this formulation are listed under the CWA. 5

6 OSHA: None of the chemicals in this formulation are considered hazardous by OSHA. DSL: Supplement to Canada Gazette, Part I, January 26, EINECS: Annex to Official journal of the European Communities, 15 th June ENCS: Unlisted Chemical Name. For ENCS chemical class or category name, Refer to ENCS No-2-649X AICS: Australian Inventory of Chemical Substances, June 1996 ELC: Korean Existing Chemical List, January 1997 ECL Serial No KE PICCS: Phillipines Inventory of Chemical Substances, 2000 Date-Issued: 3/12/1997 Date-Revised: 01/04/2015 MSDS Ref. No: G-748 MSDS Revision No: Third revision REASON FOR ISSUE: Revision of MSDS for LOGO and regulatory data MANUFACTURER DISCLAIMER: Information given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of the product for particular uses are beyond our control; all risks of use of the product are therefore assumed by the user. Nothing is intended as a recommendation for uses, which infringe valid patents, or as extending license under valid patents. Appropriate warnings and safe handling procedures should be provided to handlers and users. G-748/MSDS-VRT