NOT CLASSIFIED AS HAZARDOUS ACCORDING TO CRITERIA OF NOHSC SOIN DU CORPS A.H.A - AMINOCEL. International Beauty Supplies

Transcription

1 1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY Product name Product code Product use Company Address SOIN DU CORPS A.H.A - AMINOCEL SB81330 BODY SKIN CARE International Beauty Supplies 6e Narabang Way, Belrose NSW, Australia 2085 Telephone number (02) Fax number (02) EMERGENCY TELEPHONE NUMBER Bill McKendrick Managing Director (BH) (02) (AH) HAZARDS IDENTIFICATION Not classified as hazardous according to criteria of NOHSC Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. Not classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations 3. COMPOSITION / INFORMATION ON INGREDIENTS AQUA (WATER), PROPYLENE GLYCOL, AQUA (WATER) (AND) PROPYLENE GLYCOL (AND) ALCOHOL DENAT (AND) IODIZED HYDROLYZED EXTENSIN (AND) HYDROLYZED EXTENSIN (AND) RUSCUS ACULEATUS (BUTCHERSBROOM) EXTRACT (AND) CITRUS LIMONUM (LEMON) PEEL EXTRACT (AND) PAULLINIA CAPANA (GUARANA) EXTRACT, AQUA (WATER) (AND) ALCOHOL DENAT (AND) PASSIFLORA QUADRANGULARIS (PASSION FRUIT) EXTRACT (AND) CITRUS LIMONUM (LEMON) EXTRACT (AND) VITIS VINIFERA (GRAPE) EXTRACT (AND) ANANAS SATIVUS (PINEAPPLE) EXTRACT, CAFFEINE, L-CARNITINE, METHYLCHLOROISOTHIAZOLINONE (AND) METHYLISOTHIAZOLINONE.

2 4. FIRST AID MEASURES Route of exposure Inhalation Ingestion Eye Contact It does not imply any risk when handle and used under usual conditions. Move the victim to fresh air. If a large amount is swallowed or symptoms develop obtain medical assistance. Rinse away thoroughly with water at least for 15 minutes. If redness, irritation or watery eyes persist obtain medical attention. Skin Contact First aid facilities Remove contaminated clothes and eliminate the product from the skin with water and soap. Advice to doctor 5. FIRE-FIGHTING MEASURES Specific hazards Hazardous combustion products Suitable extinguishing media Dry chemical, Alcohol type foam, CO2, Water spray Unsuitable extinguishing media

3 Special protective equipment for fire fighters 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Before cleaning any spill or leak, individuals involved in spill cleanup must wear appropriate Personal Protective Equipment. Environmental precautions: Dispose of properly in accordance with local, state and federal regulations. Methods for cleaning up For small spills (e.g., < 5 Litres), 1. Wear appropriate personal protective equipment (e.g., goggles, gloves). 2. Maximize ventilation (open doors and windows). 3. Remove spilled material with absorbent material and place into appropriate closed container(s) for disposal. 4. Dispose of properly in accordance with local, state and federal regulations. 5. Wash all affected areas and outside of container with plenty of warm water and soap. 6. Remove any contaminated clothing and wash thoroughly before reuse. For spills 5 Litres, 1. Deny entry to all unprotected individuals. 2. Dike and contain spill with inert material (e.g., sand or earth). 3. Transfer product to containers for recovery or disposal and solid diking material to separate containers for proper disposal. 4. Remove contaminated clothing promptly and wash affected skin areas with soap and water. 5. Keep spills and cleaning runoffs out of municipal sewers and open bodies of water. 7. HANDLING AND STORAGE Handling Storage Avoid eye contact Use and store in a cool, dry, wellventilated location (e.g., local exhaust ventilation, fans). Do not store in damaged or unmarked containers or storage devices. Keep containers securely closed when not in use. Store protected from light in tightly closed containers at room temperature.

4 Other information Spilled material may present a slipping hazard if left unattended. Clean all spills promptly. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Respiratory protection: Eye protection: Hand protection Body protection None required if used in a well-ventilated area Avoid eye contact. Safety goggles Protective gloves None required under normal conditions of use Exposure limits Engineering controls 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Odour Thin cream white Characteristic ph Vapour pressure Vapour density Boiling point Melting point Solubility Specific gravity Flash point Flammability limits - lower

5 Flammability limits upper Ignition temperature 10. STABILITY AND REACTIVITY Chemical stability Conditions to avoid Incompatible materials Hazardous decomposition products This product is stable Keep sources of ignition at a distance Strong oxidizers, Acids and Alkaline agents Only at high temperatures may the product generate irritant vapors Hazardous reactions None known 11. TOXICOLOGICAL INFORMATION Toxicology data The product has not been tested for specific toxicity data Acute health hazards Ingestion Inhalation Skin Contact Eye Contact Chronic Health Hazards None known

6 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Mobility There is no specific data available for this product There is no specific data available for this product There is no specific data available for this product 13. DISPOSAL CONSIDERATIONS Product and container disposal Special precautions for landfill or incineration Dispose of properly in accordance with local, state and federal regulations. 14. TRANSPORT INFORMATION Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail Not classified as a Dangerous Good according to the International Air Transport Association (IATA) Dangerous Goods Regulations 15. REGULATORY INFORMATION Poisons Schedule AICS Status Labelling Risk phrases Safety phrases

7 16. OTHER INFORMATION Initial preparation date Amendment date Reasons for change The information provided in this is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.end of MSDS.