SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking

Transcription

1 Page: 1 Compilation date: 26/08/2011 Revision date: 31/8/11 Revision No: 13 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of substance / mixture: A unique biological cleaner designed to remove residues of oils, greases and other hydrocarbon products by enhanced bacterial degradation. An aqueous suspension of selected natural bacteria, nutrients and cleaning agents. Cleans off hydrocarbon residues by bacterial oxidation to carbon dioxide and water, with no adverse environmental impact or harmful residues. Application rate is approximately square metres per litre depending upon surface porosity and soiling. Application rate is approximately square metres per litre depending upon surface porosity and soiling levels. Intended for manual cleaning. Shake container before use Details of the supplier of the safety data sheet Company name: Oil Technics Limited Linton Business Park Gourdon Aberdeenshire Scotland, UK DD10 0NH Tel: +44 (0) Fax: +44 (0) info@oiltechnics.com 1.4. Emergency telephone number Emergency tel: +44 (0) Section 2: Hazards identification 2.1. Classification of the substance or mixture Classification under CHIP: Xi: R36/38; -: R52/53 Most important adverse effects: Irritating to eyes and skin. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment Label elements Label elements under CHIP:

2 Hazard symbols: Irritant. Page: Other hazards Risk phrases: R36/38: Irritating to eyes and skin. R52/53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. PBT: This substance is not identified as a PBT substance. Section 3: Composition/information on ingredients 3.2. Mixtures Hazardous ingredients: ORANGE TERPINES EINECS CAS CHIP Classification CLP Classification Percent : R10; Xi: R38; -: R52/53; Xn: R % DODECYLBENZENE SULPHONATE ISOPROPYLAMINE SALT Xn: R22; Xi: R38; Xi: R % PRIMARY ALCOHOL ETHOXYLATE Xn: R22; Xi: R % Section 4: First aid measures 4.1. Description of first aid measures Skin contact: Wash immediately with plenty of soap and water. Eye contact: Bathe the eye with running water for 15 minutes. Ingestion: Wash out mouth with water. If conscious, give half a litre of water to drink immediately. Do not induce vomiting. Consult a doctor. Inhalation: Move to fresh air in case of accidental inhalation of vapours Most important symptoms and effects, both acute and delayed Skin contact: Eye contact: Ingestion: Inhalation: Delayed / immediate effects: There may be mild irritation at the site of contact. There may be irritation and redness. There may be soreness and redness of the mouth and throat. No symptoms.

3 Page: Indication of any immediate medical attention and special treatment needed Section 5: Fire-fighting measures 5.1. Extinguishing media Extinguishing media: Suitable extinguishing media for the surrounding fire should be used Special hazards arising from the substance or mixture Exposure hazards: 5.3. Advice for fire-fighters Advice for fire-fighters: Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes. Section 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures Personal precautions: Mark out the contaminated area with signs and prevent access to unauthorised personnel Environmental precautions Environmental precautions: Do not discharge into drains or rivers Methods and material for containment and cleaning up Clean-up procedures: Wash the spillage site with large amounts of water Reference to other sections Section 7: Handling and storage 7.1. Precautions for safe handling Handling requirements: 7.2. Conditions for safe storage, including any incompatibilities Storage conditions: Suitable packaging: 7.3. Specific end use(s) Store in cool, well ventilated area. Section 8: Exposure controls/personal protection 8.1. Control parameters Workplace exposure limits:

4 Page: Exposure controls Engineering measures: Ensure there is sufficient ventilation of the area. Respiratory protection: Hand protection: Protective gloves. Eye protection: Safety glasses. Skin protection: Protective clothing. Environmental: An environmental assessment must be made to ensure compliance with local environmental legislation. Section 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties State: Liquid Colour: Off-white Odour: Perceptible odour Solubility in water: Soluble Boiling point/range C: 100 Relative density: ph: Other information Other information: Section 10: Stability and reactivity Reactivity Chemical stability Reactivity: Stable under recommended transport or storage conditions. Chemical stability: Possibility of hazardous reactions Stable under normal conditions. Hazardous reactions: Conditions to avoid Conditions to avoid: Incompatible materials Hazardous reactions will not occur under normal transport or storage conditions. Heat. Materials to avoid: Hazardous decomposition products Strong oxidising agents. Haz. decomp. products: In combustion emits toxic fumes of carbon dioxide / carbon monoxide.

5 Page: 5 Section 11: Toxicological information Information on toxicological effects Relevant effects for mixture: Effect Route Basis Irritation OPT DRM Hazardous: calculated Symptoms / routes of exposure Skin contact: There may be mild irritation at the site of contact. Eye contact: There may be irritation and redness. Ingestion: There may be soreness and redness of the mouth and throat. Inhalation: Delayed / immediate effects: No symptoms. Other information: Section 12: Ecological information Toxicity Ecotoxicity values: Persistence and degradability Persistence and degradability: Readily biodegradable Bioaccumulative potential Bioaccumulative potential: Mobility in soil No bioaccumulation potential. Mobility: Readily absorbed into soil Results of PBT and vpvb assessment PBT identification: Other adverse effects This substance is not identified as a PBT substance. Other adverse effects: Negligible ecotoxicity. Section 13: Disposal considerations Waste treatment methods Disposal operations: Recovery operations: Disposal of packaging: Transfer to a suitable container and arrange for collection by specialised disposal company. Recycling/reclamation of organic substances which are not used as solvents (including composting and other biological transformation processes). May be reused following decontamination.

6 NB: Section 14: Transport information The user's attention is drawn to the possible existence of regional or national regulations regarding disposal. Page: 6 Transport class: This product does not require a classification for transport. Section 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture Chemical Safety Assessment Chemical safety assessment: A chemical safety assessment has not been carried out for the substance or the mixture by the supplier. Section 16: Other information Other information Other information: Phrases used in s.2 and 3: Legal disclaimer: This safety data sheet is prepared in accordance with Commission Regulation (EU) No 453/2010. R10: Flammable. R22: Harmful if swallowed. R36/38: Irritating to eyes and skin. R38: Irritating to skin. R41: Risk of serious damage to eyes. R52/53: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R65: Harmful: may cause lung damage if swallowed. The above information is based on the present state of our knowledge at the time of publication. It is given in good faith, no warranty is implied with respect to quality or specification of product. The user must satisfy himself that the product is entirely suitable [final page]