Kit components. Bacterial Strain JM109(DE3), 500ul. Bacterial Strain JM109(DE3)

Transcription

1 07/04/2016 Kit components Product code P9801 Components: P980 Description Bacterial Strain JM109(DE3), 500ul Bacterial Strain JM109(DE3)

2

3 Page 1/7 Not classified as hazardous according to criteria of Australian Safety and Compensation Council * SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Article number: P Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. Application of the substance / the preparation: Laboratory chemicals 1.3 Details of the supplier of the safety data sheet Manufacturer/Supplier: Promega Corporation 2800 Woods Hollow Road Madison, WI U.S.A SDS author: Regulatory.Affairs@promega.com Further information obtainable from: Promega Australia Suite W3A, Level 3, Westside Building South Sydney Corporate Park O'Riordan Street (P.O. Box 7417) Alexandria NSW 2015 Australia Phone: (61) Freecall: Fax: (61) Freefax: Address: auscustserv@promega.com Melbourne Tel: (61) Fax: (61) Freecall: SDS author: Regulatory.Affairs@Promega.com 1.4 Emergency telephone number: For Chemical Emergency Spill, Leak, Fire, Exposure, or Accident Call CHEMTREC Day or Night Within USA and Canada: Outside USA and Canada: (collect calls accepted). Within Australia +(61) (Contd. on page 2)

4 Page 2/7 (Contd. of page 1) * SECTION 2: Hazards identification 2.1 Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 The product is not classified according to the Globally Harmonised System (GHS). 2.2 Label elements Labelling according to Regulation (EC) No 1272/2008 Hazard pictograms Signal word Hazard statements 2.3 Other hazards Results of PBT and vpvb assessment PBT: Not applicable. vpvb: Not applicable. * SECTION 3: Composition/information on ingredients 3.2 Chemical characterisation: Mixtures Description: The product is a mixture of the hazardous substances listed below along with unlisted nonhazardous substances. Components: CAS: glycerol 5-10% RTECS: MA Additional information: For the wording of the listed hazard phrases refer to section 16. * SECTION 4: First aid measures 4.1 Description of first aid measures General information: No special measures required. After inhalation: If the patient feels unwell or is concerned, obtain medical advice. After skin contact: Generally the product does not irritate the skin. After eye contact: Rinse opened eye for several minutes under running water. After swallowing: If the patient feels unwell or is concerned, obtain medical advice. 4.2 Most important symptoms and effects, both acute and delayed None 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. * SECTION 5: Firefighting measures 5.1 Extinguishing media Suitable extinguishing agents: CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. 5.2 Special hazards arising from the substance or mixture None known 5.3 Advice for firefighters No special advice. No special advice. Protective equipment: No special measures required. (Contd. on page 3)

5 Page 3/7 (Contd. of page 2) * SECTION 6: Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Not required. 6.2 Environmental precautions: Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water. 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). 6.4 Reference to other sections No dangerous substances are released. See Section 7 for information on safe handling See Section 13 for disposal information. * SECTION 7: Handling and storage 7.1 Precautions for safe handling No special measures required. Information about fire - and explosion protection: No special measures required. 7.2 Conditions for safe storage, including any incompatibilities Storage Requirements to be met by storerooms and receptacles: No special requirements. Information about storage in one common storage facility: Not required. Further information about storage conditions: None. 7.3 Specific end use(s) No further relevant information available. * SECTION 8: Exposure controls/personal protection Additional information about design of technical facilities: No further data; see item Control parameters Ingredients with limit values that require monitoring at the workplace: glycerol WES (Australia) Long-term value: 10 mg/m³ PEL (USA) Long-term value: 15* 5** mg/m³ mist; *total dust **respirable fraction TLV (USA) TLV withdrawn-insufficient data human occup. exp. Additional information: The lists valid during the making were used as basis. 8.2 Exposure controls Personal protective equipment General protective and hygienic measures The usual precautionary measures are to be adhered to when handling chemicals. Respiratory protection: Not required. Protection of hands: Not required. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. (Contd. on page 4)

6 Page 4/7 Eye protection: Not required. (Contd. of page 3) * SECTION 9: Physical and chemical properties 9.1 Information on basic physical and chemical properties General Information Appearance: Form: Fluid Colour: Colourless Odour: Not determined Odour threshold: ph-value at 20 C (68 F): 7.5 Change in condition Melting point/melting range: Boiling point/boiling range: Flash point: Flammability (solid, gaseous) Ignition temperature: Decomposition temperature: Self-igniting: Danger of explosion: Explosion limits: Lower: Upper: Vapour pressure: undetermined 100 C (212 F) > 100 C (> 212 F) Not applicable. 400 C (752 F) Product is not selfigniting. Product does not present an explosion hazard. Density: Not determined Relative density Vapour density Evaporation rate Solubility in / Miscibility with Water: Fully miscible Partition coefficient (n-octanol/water): Viscosity: dynamic: kinematic: Organic solvents: 8.5 % Water: 88.8 % 9.2 Other information No further relevant information available. * SECTION 10: Stability and reactivity 10.1 Reactivity No further relevant information available Chemical stability Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications Possibility of hazardous reactions No dangerous reactions known 10.4 Conditions to avoid No further relevant information available Incompatible materials: No further relevant information available. (Contd. on page 5)

7 Page 5/ Hazardous decomposition products: No dangerous decomposition products known (Contd. of page 4) * SECTION 11: Toxicological information 11.1 Information on toxicological effects Acute toxicity Based on available data, the classification criteria are not met. LD/LC50 values relevant for classification: No data available Primary irritant effect: Skin corrosion/irritation Based on available data, the classification criteria are not met. Serious eye damage/irritation Based on available data, the classification criteria are not met. Respiratory or skin sensitisation Based on available data, the classification criteria are not met. CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) Germ cell mutagenicity Based on available data, the classification criteria are not met. Carcinogenicity Based on available data, the classification criteria are not met. Reproductive toxicity Based on available data, the classification criteria are not met. STOT-single exposure Based on available data, the classification criteria are not met. STOT-repeated exposure Based on available data, the classification criteria are not met. Aspiration hazard Based on available data, the classification criteria are not met. * SECTION 12: Ecological information 12.1 Toxicity Aquatic toxicity: Not harmful to the aquatic environment 12.2 Persistence and degradability: Not available 12.3 Bioaccumulative potential Not known 12.4 Mobility in soil No further relevant information available. Ecotoxical effects: Remark: Not available Additional ecological information: General notes: Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system Results of PBT and vpvb assessment PBT: Not applicable. vpvb: Not applicable Other adverse effects No further relevant information available. * SECTION 13: Disposal considerations 13.1 Waste treatment methods Recommendation Disposal should be in accordance with applicable regional, national and local laws and regulations. Refer to Section 7: Handling and Storage and Section 8: Exposure Control/Personal Protection for additional handling information and protection of employees. Uncleaned packaging: Recommendation: Disposal must be made according to official regulations. Recommended cleansing agents: Water, if necessary together with cleansing agents. (Contd. on page 6)

8 Page 6/7 (Contd. of page 5) * SECTION 14: Transport information 14.1 UN-Number Not hazardous for transportation ADG, ADN, IMDG, IATA 14.2 UN proper shipping name None ADG, ADN, IMDG, IATA 14.3 Transport hazard class(es) None ADG, ADN, IMDG, IATA Class 14.4 Packing group None ADG, IMDG, IATA 14.5 Environmental hazards: Marine pollutant: 14.6 Special precautions for user Not applicable Transport in bulk according to Annex II of Marpol and the IBC Code UN "Model Regulation": No Not applicable. * SECTION 15: Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture Australian Inventory of Chemical Substances glycerol sodium chloride water Directive 2012/18/EU Named dangerous substances - ANNEX I None of the ingredients is listed. National regulations Waterhazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water Chemical safety assessment: A Chemical Safety Assessment has not been carried out. * SECTION 16: Other information This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Department issuing SDS: Promega Corporation Safety Department 2800 Woods Hollow Road Madison, WI U.S.A. Abbreviations and acronyms: RID: Règlement international concernant le transport des marchandises dangereuses par chemin de fer (Regulations Concerning the International Transport of Dangerous Goods by Rail) ADR: Accord européen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road) (Contd. on page 7)

9 Page 7/7 IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vpvb: very Persistent and very Bioaccumulative * Data compared to the previous version altered. (Contd. of page 6)