PRE-FEASIBILITY REPORT

Transcription

1 PRE-FEASIBILITY REPORT For ToR of Proposed Project of MANUFACTURING OF SYNTHETIC ORGANICCHEMICALS (RESINS) (5 f B IND II) By M/s M R INDUSTRIES SURVEY NO. 58/1 & 58/3 OPPOSITE WHOLESOME FOOD PVT. LTD., VILLAGE: VAIKUNTHPURA, TAL: KHEDA, DIST: KHEDA, GUJARAT (M) , mrindustries664@gmail.com

2 PRE-FEASIBILITY REPORT 1.0 EXECUTIVE SUMMARY M/sM R INDUSTRIESis a proposed project is planning to manufacture 95 MT/Month located at Opposite Wholesome Food Pvt. Ltd., Village: Vaikunthpura, Tal: Kheda, Dist:Kheda, Gujarat The project falls under category B, section 5(f) of EIA notification 2006 and amendment thereof. The site is well connected with road and railway, nearest city is Ahmedabad and there is no national park, wild life sanctuary, eco sensitive areas in surrounding10 km radius. The project doesn t fall under CRZ boundaries. 2.0 INTRODUCTION OF THE PROJECT BACKGROUND INFORMATION 2.1 Identification of project and project proponent. M/sM R INDUSTRIES is a proposed project located at is planning to MT/Month Opposite Wholesome Food Pvt. Ltd., Village: Vaikunthpura, Tal: Kheda, Dist:Kheda, Gujarat M/sM R INDUSTRIES is promoted by Mr. Jignesh M. Patel (Partner) 2.2 Brief description of nature of the project. The project fall sunder category B, section 5(f) of EIA notification 2006andamendment thereof. 2.3 Need for the project and its importance to the country and or region Thisunit is promoted by Mr. Jignesh M. Patel who will be able to meet the demand of existing plant. The unit will use good faith efforts to employ local people from the nearby villages depending up on the availability of skilled & un-skilled man power surrounding the project site. In operation phase, the proposed project would require significant work force of non-technical and technical persons. 2.4 Employment Generation (Direct and Indirect) due to the project The proposed project will give direct employment to local people based on qualification and requirement. In addition to direct employment, indirect employment shall generate ancillary business to some extent for the local population. In operation phase, the proposed project would require significant work force of non-technical and technical persons. 3.0 PROJECT DESCRIPTION

3 3.1 Type of project including interlinked and interdependent projects, if any. No 3.2 Location (Map showing general location, specific location, and project boundary &project site layout) with coordinates. Coordinate of the Project: Point Latitudes Longitudes A 22 48'45.60"N 72 38'26.02"E B 22 48'43.86"N 72 38'25.83"E C 22 48'43.43"N 72 38'29.35"E D 22 48'45.87"N 72 38'29.80"E E 22 48'46.28"N 72 38'27.10"E Figure 1: Location

4 Details of alternate sites considered and the basis of selecting the proposed site, particularly the environmental considerations gone into should be highlighted. Major factors involved in the selection of site are listed below: Proposed project site is in the Kheda area. The project site is located on level ground, which does not require any major land filling for area grading work. Proximity to Raw Material suppliers. Site is very well connected by road and railway. Availability of Power,Water,etc. 3.3 Size or magnitude of operation. 95 MT/Month of Resins in addition of existing manufacturing facility of ply wood, block board and flush Sq.m/Month. Please refer Form 1, Annexure I for process details 3. 5 Project description with process details (a schematic diagram, flow chart showing the project layout, components of the project etc. should be given) Please refer Form 1, Annexure III for process details. 3.6Raw material required alongwith estimated quantity, likely source, marketing area of final products, Mode of transport of raw Material and Finished Product. We shall procure the raw material from domestic market by roads. Finished Product will be transported using roadways. List of raw materials is enclosed as Annexure-II 3.7Resource optimization/recycling and reuse envisaged in the project, ifany, should be briefly outlined. ETP shall provide for treatmentof effluentand the treated effluent from the final collection tank will be passed through the R.O. unit and permeate of the RO will be reused and RO reject will be evaporated in jacketed evaporator. 3.8Availability of water its source, Energy/power requirement and source should be given. Water Source: The source of water for the proposed project shall meet through Existing Bore Well Supply.

5 Electricity Requirement: Electricity shall be obtained from UGVCL White LDO shall be used as a fuel for Boiler. Diesel will be used as a fuel for D.G set. The total power & fuel requirement for the proposed project are given below: Table 3: Detail of Power Electricity(KW) Sr. Source of Supply No. Total After Existing Proposed Proposed UGVCL Flue Gas Emission Table 4: Fuel RequirementDetails of Fuel Stack Sr. No. Fuel quantity Stack attached to Type of fuel 1 Thermic Fluid Agro waste / 200 Kg /hr. Heater white coal (Cap:10 lac Kcal) (Existing) 2 Wood Seasonal Chamber (2 nos) (Existing) Height from gl. 31 APCM Parameter Multi Cyclone PM<150 mg/nm 3 SO 2 < 100 ppm NO x< 50 ppm 3 Thermic Fluid Heater (Cap: 5lac Kcal (Proposed) 4 D.G. Set (125 KVA) (existing) Agro waste / white coal 100 Kg /hr. 31 Multi Cyclone Diesel 7 Lit / hr. 5 Adequate Stack Height Process Gas Emission:

6 Sr. No. Stack attached to 1 Evaporator (Proposed) Type of fuel NA (TFH oil will circulated in Evaporator vessel Fuel quantity Stack Height from gl. Parameter - 31 PM<150 mg/nm 3 SO 2 < 100 ppm NO x < 50 ppm VOC< 10 ppm 3.9 Quantity of wastes to be generated (liquid and solid) and scheme for their Management/disposal. WasteWatergeneration& Managementplan The total waste water generations from Industrial will be 0.2 KLD. This generated waste water shall be treated in ETP and shall be reused and evaporated in premises. 0.8 KLD Domestic effluents shall be disposed through septic tank & Soak pit. Solid& Hazardouswastegeneration&Managementplan Sr. no. Type/Name of Hazardous waste Specific Source of generation (Name of the Activity, Product etc.) Category and Schedule as per HW Rules. Quantity (MT/Annum) Existing Proposed After Proposed Management of HW 1. ETP Sludge Evaporation Residue Resin Residue Used oil/ spent oil ETP ETP- Evaporator Manufacturing of Ply Wood Machinery Collection, Storage, Transportation, Disposal at TSDF site. Collection, Storage, Reuse in next batch. Collection, Storage, Transportation, Sell to Registered Reprocessor/ Used as lubricant in premises

7 5 Discarded Container / Drum& Bags Raw materials Sold to Registered Re -processor/ Sand back to supplier SITE ANAYSIS 3.2 Connectivity. Siteisverywellconnectedbyroad andrailway. Availabilityofwater,power,etc. 3.3 Land Form, Land Use and Land Ownership LandForm: Non GIDC Land use: Industrial purpose for proposed project of manufacturing of Resins. Land Ownership: Private land, M/s. M R INDUSTRIES is promoted by Mr. JigneshM. Patel 3.4 Existing land use patterned. There is no forest, national park, wild life sanctuary, eco-sensitive areas in surrounding10 Km of the plant boundary. CRZisnotapplicableto theproject. 3.5 Existing Infrastructure This is proposed project activities. 3.6 SoilClassification NA proposed project is in Private Plot. 3.7 Socialinfrastructureavailable. Depending on the growth of the company the required social infrastructure will be provided. 4.0 PLANNINGBRIEF 4.1 Planning Concept Type of Industry: IND (II).

8 5.3 Land use planning (breakup along with greenbelt etc.) Sr. No. Table 7: Land Use Planning Details of Land Area For Proposed Plant (m 2 ) 1 Net Plot Area Existing Plant Proposed Plant Utility area (Boiler &Cooling Tower) Administration buildings Laborroom &Security Material Storage Open space / Road Green belt Area ETP 100 Total Area Assessment of Infrastructure Demand(Physical & Social) On the basis of the preliminary site visit, the infrastructure demand in the villages was assessed on the basis of need and priority. Employment would be as per prevailing norms of state government for skilled and unskilled people for the proposed project activity. 5.5 Amenities/Facilities Proper site services such as First Aid, Canteen, Drinking Water, Maintenance Work shop etc. will be provided to the workers. It is proposed to construct one room for labor. 5.0 PROPOSED INFRASTRUCTURE 5.1 Industrial Area (Processing Area) Processing Area: 5000 m 2 Non Processing Area:3054 m GreenBelt 1650 Sq.m will be used for greenbelt and plantation. 5.3 Social Infrastructure

9 Depending on the growth of the company the required social infrastructure will be provided. 5.4 Connectivity (Traffic and Transportation Road/Rail/Metro/Water ways etc.) Road and railways are very close to the working site. There is no proposal to make any new kind of connectivity. 5.5 Domestic water Management (Source & Supply of water) Water for domestic will be 3.0KLD, requirement will be met from own bore well. 5.6 Sewerage System Domestic wastewater will be treated in to septic tank followed by soak pit. 5.7 Industrial Waste Water Management The industrial effluent will treat in proposed ETP and treated effluent will be reused and evaporated to maintain the ZLD. 5.8 Solid Waste Management It is proposed that the total wastes will be used for leveling of the worked out area. 5.9 Power Requirement & Supply/Source Electricity shall be obtained from UGVCL. The total power requirement for the proposed project is155 HP. 6.0 REHABILITATION AND RESETTLEMENT (R & R) PLAN Not Applicable 7.0 PROJECT SCHEDULE & COST ESTIMATES 7.1 Likelydateofstartofconstructionandlikelydateof completion We shall start construction after getting environmental clearance and consent to establish.

10 7.2 Estimated Project cost. Total Project Cost for proposed project activity is Rs.3.5crore. 8.0 ANALYSISOF PROPOSAL(FINALRECOMMENDATIONS) 8.1 Financial and social benefits with special emphasis on the benefit to be local people including tribal population, if any, in the area. The project will be prove time by time for beneficial to the people as the company progress and expands its activity. By CER (2%) activity company management will be committed to improve infrastructural facilities for the local people like Educational facilities, Medical facilities, and Transportation facilities etc. Date: Place: Kheda Signature of the applicant (Project Proponent / Authorized Signatory) Name: Mr. Jignesh M. Patel Full Address: Survey No. 58/1 & 58/3, Village: Vaikunthpura, Tal: Kheda Dist: Kheda, Gujarat ***********************************