: Dispose of contents/container in accordance with regional/national/international/local regulations.

Transcription

1 Date of issue: 4/9/2018 Revision date: Supersedes: Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : Product code : Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Use of the substance/mixture : Wall Smoothing Compounds Uses advised against No additional information available 1.3. Details of the supplier of the safety data sheet Manufacturer ARDEX CEMENTO, S.A. Pol. Ind. Pla de Llerona C/Holanda 18 E Les Franqueses del Vallès Barcelona - Spain T ardex@ardex.es 1.4. Emergency telephone number Emergency number : SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Not classified Adverse physicochemical, human health and environmental effects To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayextra classification(s) to display Precautionary statements (CLP) Extra phrases : P102 - Keep out of reach of children. : Dispose of contents/container in accordance with regional/national/international/local regulations Other hazards This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII This substance/mixture does not meet the vpvb criteria of REACH regulation, annex XIII SECTION 3: Composition/information on ingredients 3.1. Substances 3.2. Mixtures Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] calcium sulfate (CAS-No.) (EC-No.) Not classified 4/9/2018 IL - en 1/6

2 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Remove person to fresh air and keep comfortable for breathing. Remove person to fresh air and keep comfortable for breathing. If you feel unwell, seek medical advice. : Wash skin with plenty of water. : Immediately rinse with water for a prolonged period while holding the eyelids wide open. Get medical advice/attention if you feel unwell. : Rinse mouth. Give nothing or a little water to drink. Do NOT induce vomiting Most important symptoms and effects, both acute and delayed Symptoms/effects 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Not expected to present a significant hazard under anticipated conditions of normal use. : Non flammable Special hazards arising from the substance or mixture Fire hazard Explosion hazard Reactivity in case of fire Hazardous decomposition products in case of fire : No fire hazard Advice for firefighters Precautionary measures fire Firefighting instructions Protection during firefighting : No specific measures are necessary. : Contain the extinguishing fluids by bunding. Do not allow run-off from fire-fighting to enter drains or water courses. : Ensure that firefighters are protected. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Spilled material may present a slipping hazard For non-emergency personnel Protective equipment : See Heading 7. Emergency procedures : Ventilate spillage area. Measures in case of dust release : Avoid dust formation For emergency responders Protective equipment : For further information refer to section 8: "Exposure controls/personal protection" Environmental precautions Avoid release to the environment. Prevent entry to sewers and public waters Methods and material for containment and cleaning up For containment Methods for cleaning up Other information 6.4. Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling : Collect spillage. Additional hazards when processed : See Heading 8. Precautions for safe handling Hygiene measures 7.2. Conditions for safe storage, including any incompatibilities Technical measures Storage conditions : Mechanically recover the product. On land, sweep or shovel into suitable containers. : Place in a suitable container for disposal in accordance with the waste regulations (see Section 13). : Ensure good ventilation of the work station. Wear personal protective equipment. Do not eat, drink or smoke when using this product. Avoid dust formation. : Do not eat, drink or smoke when using this product. Always wash hands after handling the product. : Does not require any specific or particular technical measures. : Keep only in original container. Store in a dry place. 4/9/2018 IL - en 2/6

3 7.3. Specific end use(s) No additional information available SECTION 8: Exposure controls/personal protection 8.1. Control parameters Contains no substances with occupational exposure limits 8.2. Exposure controls Appropriate engineering controls: Ensure good ventilation of the work station. Hand protection: Protective gloves Type Material Permeation Thickness (mm) Penetration Standard Reusable gloves Eye protection: Nitrile rubber (NBR), Butyl rubber, Natural rubber 6 (> 480 minutes) 2 In case of dust production: protective goggles Respiratory protection: In case of inadequate ventilation wear respiratory protection. Device Filter type Condition Standard Reusable half mask Type P1 Dust protection Environmental exposure controls: Avoid release to the environment. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Solid Appearance : Powder. Colour : white. Odour : odourless. Odour threshold ph : 8-9 Relative evaporation rate (butylacetate=1) Melting point Freezing point : Boiling point Flash point : Auto-ignition temperature : Decomposition temperature Flammability (solid, gas) : Non flammable. Vapour pressure Relative vapour density at 20 C Relative density : Solubility : Water: 2.4 g/l Log Pow Viscosity, kinematic : Viscosity, dynamic Explosive properties Oxidising properties Explosive limits : 9.2. Other information Bulk density : kg/m³ 4/9/2018 IL - en 3/6

4 SECTION 10: Stability and reactivity Reactivity No information available about this product Chemical stability Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid No available data Incompatible materials No data available Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity LD50 oral rat LC50 inhalation rat (mg/l) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity STOT-single exposure STOT-repeated exposure Aspiration hazard > 1584 mg/kg bodyweight (OECD 420: Acute Oral toxicity Acute Toxic Class Method, Rat, Female, Experimental value) > 2.61 mg/l air (OECD 403: Acute Inhalation Toxicity, 4 h, Rat, Male/female, Experimental value) ph: 8-9 ph: 8-9 SECTION 12: Ecological information Toxicity Ecology - general LC50 fish 1 : The product is not considered harmful to aquatic organisms nor to cause long-term adverse effects in the environment mg/l (96 h, Lepomis macrochirus) Persistence and degradability Persistence and degradability Persistence and degradability Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD BOD (% of ThOD). Biodegradability: not applicable Bioaccumulative potential Bioaccumulative potential Bioaccumulative potential No bioaccumulation. No bioaccumulation data available. 4/9/2018 IL - en 4/6

5 12.4. Mobility in soil Ecology - soil No information available Results of PBT and vpvb assessment This substance/mixture does not meet the PBT criteria of REACH regulation, annex XIII This substance/mixture does not meet the vpvb criteria of REACH regulation, annex XIII Other adverse effects Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Regional legislation (waste) Waste treatment methods Product/Packaging disposal recommendations SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN : Disposal must be done according to official regulations. : Dispose of contents/container in accordance with licensed collector s sorting instructions. : Refer to manufacturer/supplier for information on recovery/recycling. Empty remaining contents. Entrust the thoroughly decontaminated packaging to a licensed waste-contractor. ADR IMDG IATA ADN RID UN number UN proper shipping name Transport hazard class(es) Packing group Environmental hazards Special precautions for user - Overland transport - Transport by sea - Air transport - Inland waterway transport - Rail transport No supplementary information available Transport in bulk according to Annex II of Marpol and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations Contains no REACH substances with Annex XVII restrictions Contains no substance on the REACH candidate list Contains no REACH Annex XIV substances 4/9/2018 IL - en 5/6

6 National regulations No additional information available Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Other information ARDEX SDS EU This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 4/9/2018 IL - en 6/6