Material Safety Data Sheet

Transcription

1 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION OF THE COMPANY/UNDERTAKING Product Name: K10 Acrylic elastic waterproof coating Application: Acrylic waterproof coating Company: GoMix CO., LIMITED Address: ROOM , HUAERDUN HOTEL, NO.557 XINSHI ROAD, BAIYUN DISTRICT, GUANGZHOU, CHINA Tel: Emergency Advisory Services Tel: HAZARDS IDENTIFICATION Hazard category: Pathways: Skin contact: Into the eyes: This product is water-based paint, non-toxic, does not belong to dangerous goods. Ingestion, dermal contact. Immediately flush with water flow; Immediately wash with liquid flow, and timely medical treatment. 3 COMPOSITION/INFORMATION ON INGREDIENTS Ingredient(s) water Proportion/% CAS NO Fungicide 0.15 N/A Acrylic emulsion 46 N/A TSP Others 0.55 N/A 4 FIRST AID MEASURES Page 1 of 5

2 Eyes: Skin: Ingestion: Mainly cause a short stimulus, open your eyes with water for about 10 minutes, if still feel tingling, immediately seek medical treatment. Contact for a long time may cause skin irritation, remove contaminated clothing with soap and water to thoroughly clean the skin, seek medical advice immediately. May cause nausea, no vomiting, immediately look for a doctor. 5 FIRE FIGHTING MEASURES This product does not burn under normal circumstances. Hazardous combustion products: This does not exist Fire extinguishing method and fire extinguishing agent: Dry powder, carbon dioxide fire extinguishers Fire protection equipment: Wear protective clothing, wear self-contained breathing apparatus. Fire fighting operation: Evacuate the people and isolate fire area. Fire place is strictly prohibited non related personnel to enter. People must equip with special protective equipment, as far as possible moves to a place of safety and protection of personnel. People should be in the safe position or safe distance and in the upper to hand the fire. 6 ACCIDENTAL RELEASE MEASURES Personal protection: Environmental Alert: Cleaning method: Avoid to contact with skin and eyes Prevent products from flowing into rivers and lakes, so as to not pollute the water As far as possible to recycle the leaked coating. Use sand or soil to absorb or make the unable recycled coating naturally cured. 7 HANDLING AND STORAGE Page 2 of 5 Operational considerations: Operators need comply with the operating procedures, the operator

3 Storage note: should wear work clothes, shoes, gloves and masks. Equip with a leak emergency handling equipment and materials. When handling, people should handle gently and can t inverse it. Stored in a cool ventilated warehouse, storage temperature should be in the range of 10 to 30.Long term storage temperature should be about 20 degrees Celsius, because the risk of formation of solidification increased at 10 degrees Celsius, which led to the product is not stable. The maximum temperature should not exceed 40 to storage. 8 EXPOSURE CONTROLS/PERSONAL PROTECTION Maximum allowable concentration: Engineering control: Hand protection: Eye protection: Skin / body protection: Special health care measures: NONE Operating place should be well ventilated Wear protective gloves Be careful to operate and people can wear protective glasses Wear general work clothes Follow the basic health care regulations 9 PHYSICAL AND CHEMICAL PROPERTIES Physical state: Homogeneous paste Color: White Smell: Aroma PH : 8-9 Density: g/ml Flash point: Relative vapor density (air =1): Viscosity: about mPa.s Solubility: Be dispersed in water at any ratio. Page 3of 5 Main uses: Concrete and metal roofing, old roofing maintenance, indoor moisture,

4 waterproof construction. 10 STABILITY AND REACTIVITY Stability: Conditions: Forbidden complex: This product is stable under the recommended storage conditions, and people should avoid to contact. Heat, humid environment Cationic substance, metallic substance 11 TOXICOLOGICAL INFORMATION According to our information, the product is not harmful to human body under normal conditions, but people should pay attention to avoid to contact with the skin for a long time. 12 ECOLOGICAL INFORMATION Ecological toxicity: Biological degradation: Ecological and toxicological effects: This product is aquatic products, and harmless to the environment. 13 DISPOSAL CONSIDERATIONS Waste disposal method: According to the requirements of national and local regulations, comply with local laws and regulations, only in licensed waste disposal sites to handle. Or contact with the manufacturer to determine the disposal method. Page 4of 5 14 TRANSPORT INFORMATION

5 Dangerous goods number: Packing method: Transport notes: Does not belong to dangerous goods 20KG/ barrel (plastic barrel packaging) Packing should be complete and loading should be safe when transporting. In transport processes, ensure packaging barrel does not leak and damage. Prevent from the sun and rain and freezing in the winter. 15 REGULATORY INFORMATION 1 Safety management of chemicals in the workplace, the State Economic and Trade Commission, the safety production bureau, Dangerous goods safety manual, chemical industry press, Safety technology of dangerous chemicals, chemical industry press, Provisions on the administration of the registration of hazardous chemicals, the State Economic and Trade Commission, October 1, OTHER INFORMATION This document provides information that is not product index, so it on the specific nature of guarantee. The containing information is based on the operation of our products, storage and use in understanding of health and general safety guidance. It does not apply to the special or non-standard or not according to the directions and suggestions to use. In fact the user should combine with the local national, the local laws and regulations to use. Page 5 of 5