Water Filters, Carbonators, Boosters

Transcription

1 1. Water Dispensing Systems 2. Carbonators and Accessories 3. Water Boosters and Accessories 4. Water Filtration Systems and Replacement Filters 5. Water Bottle Dispensing System Water Dispensing Systems An environmentally friendly and cost effective way to serve "artisan" fresh ambient, chilled, and chilled sparkling water without the burden of purchasing, inventory, refrigerating and recycling of bottled water! Crystal stainless steel countertop dispensers contain a 4.75 gallon water tank, 20 lb ice bank,.18 gallon carbonator, 132 psi carbonator pump, 1/6HP compressor and uses R134a refrigerant. 115V/60Hz. Italian designed water towers (detailed on next two pages) have polished chrome or white finish and flow control faucets. Water towers require a remote Horeca flash chiller/carbonator unit. Tap handles and medallions are sold separately. Custom graphics are available, see page 3 for lead times. The robust and efficient Horeca stainless steel 4-line flash chiller comes with a 6.6 gallon water tank, built in.34 gallon carbonator, and 1/4HP compressor which makes for a small carbon footprint. R134a refrigerant. 115V/60Hz. Our water dispensing systems are designed to make installations easy with plug & play parts. ALL products on this page are ETL and ETLS approved! NEW! NEW! Crystal water and sparkling water dispenser 12.6W x 19.7H x 30.7"D WF Multi-drink Horeca 15.75W x 23.23H x 23.62"D Lucky and Lit Lucky Towers Part Number Description WF faucet Crystal water dispenser WF faucet Crystal water dispenser Crystal extended 4 yr compressor warranty WF Horeca remote cooler w/carb Horeca extended 4 yr compressor warranty Sexy and Lit Sexy Towers To ensure optimum water quality and customer satisfaction all water dispensing systems should include a water filtration system. Our water filtration systems, as well as water boosters and water regulators are in this section of the catalog. Page E-1

2 Water Dispensing Systems Italian designed water towers have polished chrome or white finish and flow control faucets. Water towers require a remote Horeca flash chiller/carbonator unit (on previous page). All glycol towers are cold blocked. Tap handles, medallions and drip trays are sold separately on the next page. See next page for custom graphics lead times. Page E-2 ETLS approved! Sexy and Lit Sexy Towers Part Number Faucets Description Drip Tray WW107140CE 1 Mongoose chrome tower air cooled, 304SS Euro Quix Tap 10" WW107150CE 2 Mongoose chrome tower air cooled, 304SS Euro Quix Tap 10" WW107160CE 3 Mongoose chrome tower air cooled, 304SS Euro Quix Tap 15" WW107143CE 1 Mongoose white tower air cooled, 304SS Euro Quix Tap 10" WW107153CE 2 Mongoose white tower air cooled, 304SS Euro Quix Tap 10" WW107163CE 3 Mongoose white tower air cooled, 304SS Euro Quix Tap 15" WW107140CE-CK 1 Mongoose chrome tower glycol cooled, 304SS Euro Quix Tap 10" WW107150CE-CK 2 Mongoose chrome tower glycol cooled, 304SS Euro Quix Tap 10" WW107160CE-CK 3 Mongoose chrome tower glycol cooled, 304SS Euro Quix Tap 15" WW107143CE-CK 1 Mongoose white tower glycol cooled, 304SS Euro Quix Tap 10" WW107153CE-CK 2 Mongoose white tower glycol cooled, 304SS Euro Quix Tap 10" WW107163CE-CK 3 Mongoose white tower glycol cooled, 304SS Euro Quix Tap 15" WW107240CE 1 Mongoose chrome, air cooled, 304SS Euro Quix Tap, medallion holder 10" WW107250CE 2 Mongoose chrome, air cooled, 304SS Euro Quix Tap, medallion holder 10" WW107260CE 3 Mongoose chrome, air cooled, 304SS Euro Quix Tap, medallion holder 15" WW107243CE 1 Mongoose white, air cooled, 304SS Euro Quix Tap, medallion holder 10" WW107253CE 2 Mongoose white, air cooled, 304SS Euro Quix Tap, medallion holder 10" WW107263CE 3 Mongoose white, air cooled, 304SS Euro Quix Tap, medallion holder 15" WW107240CE-CK 1 Mongoose chrome, glycol cooled, 304SS Euro Quix Tap, medallion holder 10" WW107250CE-CK 2 Mongoose chrome, glycol cooled, 304SS Euro Quix Tap, medallion holder 10" WW107260CE-CK 3 Mongoose chrome, glycol cooled, 304SS Euro Quix Tap, medallion holder 15" WW107243CE-CK 1 Mongoose white, glycol cooled, 304SS Euro Quix Tap, medallion holder 10" WW107253CE-CK 2 Mongoose white, glycol cooled, 304SS Euro Quix Tap, medallion holder 10" WW107263CE-CK 3 Mongoose white, glycol cooled, 304SS Euro Quix Tap, medallion holder 15" WW107091CE 1 Sexy chrome tower air cooled, 304SS Euro Quix Tap 10" WW107092CE 2 Sexy chrome tower air cooled, 304SS Euro Quix Tap 10" WW107093CE 3 Sexy chrome tower air cooled, 304SS Euro Quix Tap 15" WW107091CE-CK 1 Sexy chrome tower glycol cooled, 304SS Euro Quix Tap 10" WW107092CE-CK 2 Sexy chrome tower glycol cooled, 304SS Euro Quix Tap 10" WW107093CE-CK 3 Sexy chrome tower glycol cooled, 304SS Euro Quix Tap 15" WW107095CE 1 Lit medallion Sexy chrome tower air cooled, 304SS Euro Quix Tap 10" WW107096CE 2 Lit medallion Sexy chrome tower air cooled, 304SS Euro Quix Tap 10" WW107097CE 3 Lit medallion Sexy chrome tower air cooled, 304SS Euro Quix Tap 15" WW107095CE-CK 1 Lit medallion Sexy chrome tower glycol cooled, 304SS Euro Quix Tap 10" WW107096CE-CK 2 Lit medallion Sexy chrome tower glycol cooled, 304SS Euro Quix Tap 10" WW107097CE-CK 3 Lit medallion Sexy chrome tower glycol cooled, 304SS Euro Quix Tap 15" WF N/A Zenia 3 lever tower 10" WF N/A Zenia 3 push button tower 10" Mongoose with Trap Z handles Mongoose with chrome handles Mongoose with medallions Zenia lever tower Zenia push button tower Continuing product improvements may necessitate changes without notice ABS

3 Water Dispensing Systems Italian designed water towers have polished chrome or white finish and flow control faucets. Water towers require a remote Horeca flash chiller/carbonator unit (page 23). All glycol towers are cold blocked. Towers on this page use 10" drip trays. Tap handles, medallions and drip trays are sold separately. Custom graphics are available, see chart below for lead times. Part Number Faucets Description WW107121CE 1 Lucky chrome tower air cooled, 304SS Euro Quix Tap WW107122CE 2 Lucky chrome tower air cooled, 304SS Euro Quix Tap WW107123CE 3 Lucky chrome tower air cooled, 304SS Euro Quix Tap WW107121CE-CK 1 Lucky chrome tower glycol cooled, 304SS Euro Quix Tap WW107122CE-CK 2 Lucky chrome tower glycol cooled, 304SS Euro Quix Tap WW107123CE-CK 3 Lucky chrome tower glycol cooled, 304SS Euro Quix Tap WW107126CE 1 Lit medallion Lucky chrome tower air cooled, 304SS Euro Quix Tap WW107127CE 2 Lit medallion Lucky chrome tower air cooled, 304SS Euro Quix Tap WW107128CE 3 Lit medallion Lucky chrome tower air cooled, 304SS Euro Quix Tap WW107126CE-CK 1 Lit medallion Lucky chrome tower glycol cooled, 304SS Euro Quix Tap WW107127CE-CK 2 Lit medallion Lucky chrome tower glycol cooled, 304SS Euro Quix Tap WW107128CE-CK 3 Lit medallion Lucky chrome tower glycol cooled, 304SS Euro Quix Tap Water Dispensing System Parts and Accessories Part Number Description WW Medallion 80 mm "CHILLED" water WW Medallion 80 mm "CHILLED SPARKLING" water WW Medallion 80 mm "AMBIENT" water WW Medallion 82 mm "CHILLED" water WW Medallion 82 mm "CHILLED SPARKLING" water WW Medallion 82 mm "AMBIENT" water WW Shotgun handle "CHILLED" water WW Shotgun handle "CHILLED SPARKLING" water WW Shotgun handle "AMBIENT" water WW Trap Z handle "CHILLED" water WW Trap Z handle "CHILLED SPARKLING" water WW Trap Z handle "AMBIENT" water BB XL Chrome plated brass tap handle 2.5" BB B European black plastic tap handle 4" BB SS 304SS Euro faucet with US thread BB SS 304SS Euro flow control faucet with US thread BB SS Euro Quix flow control faucet with shank BB Drip tray no drain 10-3/8" x 5 3/8" BB Drip tray no drain 15" x 5 3/8" BB Drip tray with drain 10-3/8" x 5 3/8" BB Drip tray with drain 15" x 5 3/8" BB VS Flat flash cooler, 2 lines, 6 GPH BB VS Flat flash cooler, 4 lines, 15 GPH ETLS approved! Lucky and Lit Lucky Towers Shotgun 2.0 Trap Z WW WW WW WW WW WW Water tower medallions BB Custom Graphics Tap Handles, UV Printed Medallions, 80 & 82mm BB BB Lead Qty Time days days days 100+ Confirmation days days Confirmation BB B BB SS BB To ensure optimum water quality and customer satisfaction all water dispensing systems should include a water filtration system. Our water filtration systems, as well as water boosters and water regulators are in section E of this catalog. Page E-3

4 Lancer Carbonators and Components Known for its superior quality and reliability, the Turbo heavy duty, high capacity carbonator has a 100 GPH (379 LPH) pump, ideal for fast flow valves. With 60 F inlet water it will provide a carbonation level of 6.0. With 75 F inlet water it will provide a carbonation level of 5.5, and at maximum flow 5.3. Turbo has solid state electronics, a built-in advanced diagnostics system, ASSE approved vented check valve, stainless steel base with rubber feet, 3/8" male barb inlets and dual 3/8" male flare soda outlets. Dimensions: 12.25"W x 12.5" H x 14.25" D. Shipping weight: 35 lbs. Part Number Description Carbonator, fast flow with vented check valve 115V Insulated carbonator, fast flow w vented check valve 115V Carbonator, fast flow with vented check valve, 220V Carbonator, recirculating system Probe assembly, fast flow, Turbo Probe assembly, Lancer Probe assembly, universal Liquid level control board, universal Proximity switch assembly Capacitor for carb motor - use with Tank assy, Turbo Tube assy, Turbo carb, N isolator Tank assy, carb, 3/8 flare inlet Small motor, carb, 115V60, 1/4, for FS16 deck, R/M Lancer Turbo carbonator SHURflo High Pressure Electric Carbonator 8005 Series, positive displacement, open flow, 3 chamber diaphragm pump is self-priming and can run dry without damage. Comes with ground wires and base plate. Flow rate: 1.4 GPM. Operating pressure: 100 psi. 115V. Part Number Description SHURflo carbonator pump, high pressure, 100 psi bypass, 1.5 GPM, 3/8-18 FPT, no shutoff switch, non-corded SHURflo carbonator pump, high pressure, 100 psi bypass, 0.7 GPM, 3/8-18 FPT, no shutoff switch, non-corded Page E-4 Continuing product improvements may necessitate changes without notice ABS

5 McCann s Carbonators McCann s carbonators produce 100 GPH, have Diamond Bright tanks, brass water pumps with integral strainers, and encapsulated electronics to prevent moisture damage. Base is stainless steel with press-in rubber feet to reduce noise. Heat sink probe caps prolong probe life, 2-piece probe design simplifies diagnostics, and there s no need to shut off the water or CO 2 for service. To test the 2-piece float probe: remove the probe electronics, pass the tip of a magnetic screwdriver past the lower end of the tube. If the reed switch closes, it is operating properly. The 2-piece probe has a five year warranty. Recirculating cold carb system maintains temperature at F for optimum carbonation levels, and can be easily retrofit any installed dispenser system. All carbonators have ASSE 1022 backflow preventors, vented check valves, 1/4" MFL CO 2 inlet, 3/8" MFL water inlet and 3/8" MFL soda water outlet(s). 115V have 1/4 HP motors, 220V have 1/3 HP. Part Number Low Lead Description Tank Outlets VCV E E Big Mac carbonator, 115V 13.5" W x 10.5" H x 12.75" D 2 gals. 2 Yes E Big Mac carbonator, 220V 13.5" W x 10.5" H x 12.75" D 2 gals. 2 Yes Standard carbonator, 115V 9" W x 11" H x 11.5" D 32 oz. 1 Yes Standard carbonator, 220V 9" W x 11" H x 11.5" D 32 oz. 1 Yes Carbonator-in-a-box, 115V 12.25" W x 15" H x 6.5" D 32 oz. 1 Yes Carbonator-in-a-box, 220V 12.25" W x 15" H x 6.5" D 32 oz. 1 No E Recirculating cold carb syst, 115V 25" W x 15" H x 18" D 2 gals. 2 Yes E Cold carb retrofit, 115V 25" W x 15" H x 18" D 2 gals. 2 Yes E E E recirculating cold carb system Page E-5

6 McCann s Carbonator Components Part Number Description Carbonator motor, 1/3 HP, resilient base, 115V Carbonator motor, 1/3 HP, welded base, 115V Block, support, motor, strain relief, right Block, support, motor, strain relief, left Float and probe assembly Probe kit and mounting studs Probe only Assembly, probe, 115V electrical, black cap Assembly, 115V/220V, probe float, ring male prong to 3 female prong adaptor cord/plug female prong cord/plug Cap plug, VC-375-8, vinyl Cap plug, VC-600-8, black, vinyl Power cord assembly (18/3), 8' Pressure switch and cord assembly for all Mc- Cann s boosters Carb pump saver with lamp ASSE 1022 ABF-1 Anderson brass check valve/ backflow preventer, low lead, 3/8 MFL X 3/8 MPT Press relief valve, with barb 150 psi Pressure relief valve for carb tank, 180 psi Check valve, single, 1/4" MFL Check valve, double, 1/4" MFL Tubing, PVC, 1/4 ID x 3/8 OD, clear, cut to 12 long Water inlet tubing assembly, 3/8, ASSE Tubing, soda, Carb-in-a-box Assembly, tubing, water-in, Carb-in-a-box Assembly, tubing, CO2, Carb-in-a-box Assembly, tubing, Carb-in-a-box Assembly, carbonator, weld, top & bottom, small tank, 3/8 MFL w/stud Assembly, tubing, water inlet & nut for small tank Pump, brass, rotary vane, 100 gph, Procon Brass strainer Clamp, V-band, carbonator Aquatec pump DDP7800 diaphragm 115V Carbonator tank assembly w decals, large, 2 out Carbonator tank assembly, weld complete, 2 out Carbonator tank, small, 3/8 out, w decals & stud Assembly, carbonator, weld, small tank, 3/8 MFL w 1/2 stud Assy, carb tank, Simplex Assembly, panel, front, enclosure, Carb-in-a-box Enclosure, welded, Carb-in-a-box Page E-6 Part Number Description Assembly, carbonator base, plastic leg sets Small carbonator base McCanns carbonator water inlet & nut assy, plastic base Foot, rubber Carbonator foot (for bases) Stud, probe Washer, lock, # 1/4, split, SS Washer, lock, 5/16, split, zinc plated Washer, lock, # 1/4, external tooth, zinc plated Nut, hex, 1/4-20, SS Fitting, 3/8 male flare x 3/8 male pipe thread, brass Gasket, flare, 1/4, SAE Fitting, male elbow Clamp, 13/32 ID, Oetiker, stepless R Fitting, 3/8 MPT x 3/8 FPT, 90 elbow, brass /4-20 x.50, flanged, expansion insert Nut, hex, 10-32, zinc plated Instruction, installation, carbonator & probe (not shown) Decal, carbonator tank, warning, CO Label, carbonator, large Tag, ABF Wire tie, twister, 5" long Adhesive, Loctite, Continuing product improvements may necessitate changes without notice ABS

7 Carbonator Parts and Accessories A CM-1FJ Part Number Description /4 HP carb motor resilient barb /3 HP carbonator motor, welded base, 115V /3 HP GE carbonator motor, 115/230V (dual) /3 HP carbonator motor, H682, carb ball bearing S48AB88B92 Motor, 1/3 HP,115V/60, resilient cradle base, bulk pack Kit, internal repair AB Spring, check valve Carbonator/water booster floor stand, stainless Carbonator/water booster wall or rack mount shelf, stainless CM-1FJ Carbonator/water booster wall or rack mount shelf, black CM-3FJ Carbonator/water booster floor stand, black A Watts water regulator, 3-50 psi, no gauge port, 3/8" FNPT A Watts water regulator, psi, no gauge port, 3/8" FNPT gallon accumulator tank gal motorless carb tank Brixing tools can be found in Syrup Systems, Section C. CM-3FJ Carbonation Testers Proper carbonation is critical to soft drink quality. During preventive maintenance several soft drink samples are poured into the chilled tester. Pressure and temperature are recorded and cross-referenced with the table on the canister to determine the current carbonation volume, and whether or not the carbonation needs adjustment. RHB Part Number Description 2701 Pepsi carbonation tester, complete assembly A Pepsi carbonation tester, thermometer assembly A Pepsi carbonation tester, relief valve assembly A Pepsi carbonation tester, canister assembly 2701-A10 Pepsi carbonation tester, cap (must be purchased with gasket) Pepsi carbonation tester, gasket with adhesive, for cap Pepsi carbonation tester, gauge 0-30 psi 600GP Pepsi carbonation tester, gauge protection boot Lancer carbonation tester, complete assembly Lancer carbonation tester, thermometer assembly Lancer carbonation tester, vent valve stem Lancer carbonation tester, vent cap Lancer carbonation tester, adapter Lancer carbonation tester, seal Lancer carbonation tester, cap Lancer carbonation tester, gauge RHB-32 Refractometer, 0-32% sugar/brix Page E-7

8 Carbonator Pumps Rotary vane pumps move potable water to beverage dispensers. Models with strainers have removable caps for periodic cleaning (every four months under normal conditions). Inlet and outlet ports are 3/8" NPT threaded. The products listed below are the most commonly ordered part numbers. For additional pump options call ABS customer service. Some states require low or lead-free metals. Fluid-O-Tech PA350X Fluid-O-Tech PA350 Fluid-O-Tech PA310X Fluid-O-Tech PA801 Procon Series 1 Procon Series 2 Procon Series 3 Procon Series 4 Part Number Low Lead Series Brass or SS GPH PSI Strainer Bypass/ Relief Brand PA PA Brass No Yes Fluid-O-Tech PA3501X-250 PB301 PA Brass Yes Yes Fluid-O-Tech PA PA Brass Yes Yes Fluid-O-Tech PA1501 PB1501 PA Brass No Yes Fluid-O-Tech PA PA Stainless Steel No No Fluid-O-Tech PA PA Stainless Steel No No Fluid-O-Tech PA PA Stainless Steel No Yes Fluid-O-Tech 111A100F11AA A100F11AA250 1 Brass Yes Yes Procon 111A125F11AA A125F11AA250 1 Brass Yes Yes Procon 112A050F11AA100 2 Brass No Yes Procon 112A050F11AA170 2 Brass No Yes Procon 112A100F11BB150 2 Brass No Yes Procon 112E100F11BA170 2 Brass No Yes Procon 113A100F31AA 3 Stainless Steel No Yes Procon 113A100F31BA250 3 Stainless Steel No Yes Procon 113B100F11AD 3 Stainless Steel No Yes Procon 103A100F31BA (non-food grade) 3 Stainless Steel No Yes Procon 114B240F11BA250 4 Brass No Yes Procon 114A330F11XX 4 Brass 330 N/A No No Procon Page E-8 Carbonator Pump Parts and Accessories Part Number Description 1113 Band clamp for Procon pump 1138 Strainer screen for Series 1 Procon pump 1143 Coupling adapter for Procon pump 3212 Procon pump strainer O-ring Procon pump acorn nut with O-ring groove Pressure spring Insulation cover for Series 3 Procon pump W Insulation cover right side for Series 1 Procon pump Insulation cover left side for Series 1 Procon pump Continuing product improvements may necessitate changes without notice ABS

9 Backflow Preventors A vented backflow preventor will provide pressure relief if the primary check valve fails, ensuring that the secondary check valve will remain closed S2722 Plumbing codes in most states require that a ASSE standard 1022 vented backflow preventer is used on all carbonated beverage dispensers. Those with an internal ASSE 1032 nonvented check valve must have an ASSE 1022 check valve installed on the dispenser water line S470DVV66X S470DVVP66X S470DVV6F6X S470D-66 S470D-H6H6 S470DFP4P Part Number Type Description Fitting ASSE 1022 ABF-1 brass check valve, low lead ASSE 1022 ABF-1 brass check valve w 1/8" vent, low lead ASSE 1022 McCann s double check valve ASSE 1022 Watts SD-3 check valve 3/8" MF ASSE 1022 Watts SD-3 check valve with strainer 3/8" MF ASSE 1022 Watts SD-2 double check valve 3/8" MF S2722 ASSE 1022 Vent tube fitting 1/8" barb ASSE 1022 McCann s E3000 conversion kit ASSE 1022 McCann s E2000 conversion kit ASSE 1022 McCann s 43 Series conversion kit S470DVV66X ASSE 1032 Double check with vent 3/8" MF S470DVVP66X ASSE 1032 Double check with vent 3/8" MPT x 3/8" MF S470DVV6F6X ASSE 1032 Double check with vent stem 3/8" MF x 3/8" FF S470D-66 SS Ball Double ball check valve 3/8" MF S470D-H4H4 SS Ball Double ball check valve 1/4" barb S470D-H6H6 SS Ball Double ball check valve 3/8 barb S470DFP4P4 SS Ball Double ball check valve 1/4" FNPT x 1/4" NPT S SS Ball Single ball check valve 3/8" MF S470-H6H6 SS Ball Single ball check valve 3/8" barb Check valve assy, 3/8, SS Valve assy, check Check valve assy, dbl, 1/4, SS Kit, check valve assy, FS30, ABCO Check valve #600 S Page E-9

10 Water Booster Systems Water boosters provide consistent water pressure to beverage dispensing systems, ensuring optimum performance. Gas-Driven Boosters Flojet K56 system has a 1/2 gallon accumulator tank, quick disconnect ports, and exhuast muffler for quiet operation. It is self-priming, supplies up to 5 GPM, and operates psi. Dimensions: 12" H x 11.5" W x 7" D. 1 year warranty. Flojet G60 pump operates quietly and supplies up to 5 GPM. If pumping over 1.7 GPM a pulsation dampener or accumulator tank should be used to reduce pulsation due to momentary shifts in flow requirements. Operates psi. Dimensions: 5.27" H x 3.21" W x 4.58" D. Weight: 1.24 lbs. 1 year warranty. G60 pump K56 system Part Number Description Product Inlet Product Outlet Gas Inlet K A K56 water boost system w 1/2 gal tank 1/2" barbed straight plastic 1/2" barbed straight nylon 1/4" CO 2 shutoff brass K56 1/2 gallon bladder tank N/A N/A N/A G G60 water pump, stand-alone or 1/2" barbed straight plastic 1/2" barbed straight plastic 1/4" CO 2 shutoff brass replacement pump for K56 system G56 pump muffler port N/A N/A N/A Fully Automatic Electric Boosters Typically used when pumping from a cistern, water storage tank, or other ground water source. Both 2820 and 2840 Series have an accumulator tank, built-in inlet strainers, pressure switches and check valves. Dimensions: 11" W x 7" H x 11.5" D. 115V. 1 year warranty and 2840 system Part Number Description Product Inlet/Outlet PSI GPM A 2820 Series, 115V 3/8" MPT A 2840 Series, 115V 1/2" OD or 3/4" OD hose barb A 2840 Series, 115V 1/2" OD or 3/4" OD hose barb A 2840 Series, 12V 1/2" OD or 3/4" OD hose barb Page E-10 Continuing product improvements may necessitate changes without notice ABS

11 Triplex Water Booster System Triplex has a 4 gallon stainless steel tank, food grade bladder, provides 1.4 GPM and up to 100 psi outlet. Its advanced pump technology provides high efficiency, increased draw-down time, and extended life. If the inlet pressure exceeds 30 psi the pump requires a 30 psi water regulator. Operating temperature: F. Pump inlet: 3/8" hose barb. Tank discharge port: 1/2" hose barb. 115V. Triplex Water Booster/Water Delivery Pumps The Triplex High Pressure diaphragm pumps are self-priming and can run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. If the inlet pressure exceeds 30 psi the pump requires a 30 psi water regulator. 115V. Duplex II Water Booster/Water Delivery Pumps The self-priming Duplex II Series with new diaphragm design, new valves, built-in backflow preventer, heavy-duty ball bearings and motor have been designed for maximum efficiency and long life. 115V. AC Variable Speed Drive (VSD) Quad Pumps The AC VSD constant pressure pump matches motor speed to system demand to provide stable flow and reduced amp draw, eliminating unwanted pump switch cycling and the need for an accumulator tank. If the inlet pressure exceeds 30 psi the pump requires a 30 psi water regulator. 115V. 1 year warranty. Part Number Description Water Inlet Water Outlet PSI GPM A Triplex booster system 3/8" barb 1/2" barb Triplex Series 3/8" FPT 3/8" FPT Triplex Series 3/8" FPT 3/8" FPT D4821H4011 Duplex II Series 3/8" FPT 3/8" FPT D4831H5011 Duplex II Series 3/8" FPT 3/8" FPT D4834H6011 Duplex II Series 3/8" FPT 3/8" FPT D4834H7011 Duplex II Series 3/8" FPT 3/8" FPT A AC VCD with 3 wires A AC VCD cable with plug 5.0 Page E-11

12 Flojet Water Booster Accessories Part Number Description C Inline water regulator, 15 psi, 3/8" hose barb fittings C Inline water regulator, 30 psi, 1/2" hose barb fittings C Inline water regulator, 30 psi, no ports C Inline water regulator, 30 psi, 3/8" hose barb fittings C Inline water regulator, 50 psi, 3/8" hose barb fittings C Inline water regulator, 50 psi, no ports C Inline water regulator, 50 psi, 3/8" hose barb fittings C Inline water regulator, 80 psi, 1/4" hose barb fittings C Inline water regulator, 80 psi, 3/8" hose barb fittings Accumulator tank, 1 gallon, 3/4" MPT openings, no fittings A Accumulator tank,.60 gallon, 3/4" MPT openings, no fittings A Accumulator tank, 125 psi,1 quart/liter capacity, 1/2" barb fittings B Accumulator tank, rubber valve, 125 psi, 1/2 quart/liter capacity, 1/2" barb fittings B Accumulator tank, metal valve, 125 psi, 1/2 quart/liter capacity, 1/2" barb fittings Flojet Water Booster/Pump Fittings Page E A A B B / A Inline water regulators B/ B Part Number Application Pump Series Barb Size Shape Material Additional Info A Inlet/Outlet G56 & K56 1/4" Straight hose barb Stainless steel A Inlet/Outlet G56 & K56 3/8" Straight hose barb Stainless steel Inlet/Outlet G56 & K56 1/2" Straight hose barb Plastic/Celcon Inlet/Outlet G56 & K56 1/2"-3/8" Straight hose barb Plastic/Celcon Inlet/Outlet G56 & K56 1/2-3/8 Elbow hose barb Plastic/Celcon Inlet/Outlet G56 & K56 1/2" Elbow hose barb Plastic/Celcon B Inlet/Outlet G56 & K56 1/4" Straight Plastic John Guest B Inlet/Outlet G56 & K56 3/8" Straight Plastic John Guest B Inlet/Outlet G56 & K56 1/2" Straight Plastic John Guest Inlet/Outlet Duplex II & /8" x 3/8" Straight, MPT x barb Plastic Inlet/Outlet Duplex II & /4" x 3/8" Straight, MPT x barb Plastic Inlet/Outlet Duplex II & /8" x 1/2" Straight, MPT x barb Plastic Inlet/Outlet Duplex II & /8" x 1/4" Straight, MPT x barb Plastic Inlet/Outlet Duplex II & /4" x 1/4" Straight, MPT x barb Plastic Inlet/Outlet Duplex II & /8" x 3/8" Elbow, MPT x barb Plastic Inlet/Outlet Duplex II & /4" x 3/8" Elbow, MPT x barb Plastic Inlet/Outlet Duplex II & /8" x 1/2" Elbow, MPT x barb Plastic Inlet/Outlet Duplex II & /8" x 1/4" Elbow, MPT x barb Plastic Inlet/Outlet Duplex II & /4" x 1/4" Elbow, MPT x barb Plastic Continuing product improvements may necessitate changes without notice ABS

13 McCann s Water Boosters McCann s electric water boosters have stainless steel tanks and fittings, pre-charged bladders and relief valves. Stainless steel manifold with pressure gauge and Anderson Brass ASSE 1022-specified backflow prevention device. Flow rates up to 100 GPH. Minimum inlet pressure: 20 psi. Outlet pressure switch: psi. 115V. Standard water boosters have a 1/3 HP motor, 100 GPH brass rotary vane pump and single ball check valve. Economy water boosters have a 100 GPH Aquatec motor and pump combination. The dual surge tank kit has two 4 gallon tanks and fits onto a 4-wide BIB rack base. Minimum inlet pressure: 20 psi. Outlet pressure switch: psi. Tank pre-charge 40 psi. Relief valve 150 psi. Flow rate 100 GPH. Size:18.5H x 40W x 22.75"D. 1/3 HP motor,115v. Part Number Model Tank Inlet/Outlet Additional Information Standard 4 gallon 3/8" / 1/2" Standard 4 gallon 3/8" / 1/2" Low lead brass Standard 4 gallon 3/8" / 1/2" CC Standard 4 gallon 3/8" / 1/2" Low lead brass, CC Standard 2 gallon 3/8" / 1/2" Standard 2 gallon 3/8" / 1/2" Low lead brass Standard 2 gallon 3/8" / 1/2" CC Standard 2 gallon 3/8" / 1/2" Low lead brass, CC /8 Economy 2 gallon 3/8" /2 Economy 2 gallon 1/2" /8 Economy 4 gallon 3/8" /2 Economy 4 gallon 1/2" Dual Surge (2) 4 gal 3/8 / 1/2 Powder coated steel rack/base Standard model Economy model Dual surge tank McCann s Water Booster Parts and Accessories Part Number Description Pressure switch and cord assembly for all McCann s boosters 111A100F11AA250 Rotary vane pump for or Motor for or Aquatec motor for , or Many McCanns s booster parts and accessories are also carbonator parts and accessories. See pages 6-8 of this section for more booster parts and accessories Page E-13

14 SHURflo Electric Water Booster Systems All booster systems include a mountable base, 30 psi water regulator and pump cord. The Mini has a plastic accumulator tank. The Medium and Maxi booster systems have a stainless steel tank. 115V. Mini Medium Part Number Description GPM Tank PSI Water Inlet/Outlet Mini boost system with mounting board 21 oz. 60 psi 1/4 & 3/8" SS barb Mini boost system with mounting board 21 oz. 90 psi 3/8" SS barb Medium E boost system with replaceable tank bladder gal 90 psi 3/8" SS barb SV Medium E boost system w side mount, quick disconnect pump ports, replaceable tank bladder, SHURlock shut-off ball valve gal 90 psi 3/8" SS barb Medium E boost system with replaceable tank bladder gal 60 psi 3/8" SS barb Medium E boost system with replaceable tank bladder, NOCCHI, HAD gal 70 psi 3/8" SS barb Maxi boost system, corded pump gal 90 psi 3/8" SS barb Maxi boost system, corded pump gal 90 psi 1/2" SS barb SHURflo Electric Water Pumps Positive displacement 3 chamber diaphragm water delivery pumps are self-priming, and can run dry without damage. Pumps include ground wires and baseplate. 115V Series Part Number Description GPM PSI Water Inlet/Outlet SHURflo V high flow low pressure transfer pump, non-corded /2" MPT SHURflo V high flow low pressure transfer pump, corded /2" MPT Delivery pump, 45 psi bypass, 115V, non-corded /2" MPT Delivery pump, 45 psi bypass, 115V, non-corded /8" MPT Delivery pump, 45 psi bypass, 115V, corded /8" MPT Delivery pump, no bypass, 115V, non-corded /8" MPT Delivery pump, 24VAC, non-corded /2" MPT Standard water boost pump /8" FPT Delivery pump, 45 psi bypass, 115V, corded /8" FPT Replacement water booster pump, SHURflo snapfit, 115V, no fittings N/A Replacement delivery pump, 1/2"-14 NST straight thread, 24VDC, no fittings /2"-14 NST Replacement water booster pump, 115V, no fittings N/A Standard water boost pump, 115V /8" FPT Replacement pump for water boosters: , SV, , , , , , WB2-LVPO-01, , , WB2-HYD, /8 & 1/ Replacement water booster pump, SHURflo snapfit I/O, 24VDC, no fittings SHURflo snapfit Water boost pump kit for use with separate storage tank, VAC, 24VDC 60 1/2"-14 NST Replacement power supply VAC 50/60 Hz, 120 watt, 24 VDC 5.0 amps N/A N/A N/A Maxi 2088 Series 8005 Series Page E-14 Continuing product improvements may necessitate changes without notice ABS

15 Water Booster Filter Combo Systems Filtered water improves the flavor of soft drinks, increases carbonation, and extends the life of equipment. Boosted water ensures consistent water pressure for consistent brix ratio, maximum flow rate and efficiency. Combining the two systems into one conserves valuable space. SHURflo s LVPO (Low Volume per Outlet) water boost filtration system is a complete turn-key solution which provides perfect ingredient water to low volume fountain dispensers and ice machines. The LVPO filtration system features: SHURflo 90 psi, 115 VAC, 8000 Series corded booster pump 2 gallon stainless steel water accumulator tank LVPO F-1 Big Boy 5 micron carbon block inline filter for particulate, chlorine, taste and odor reduction Filter can be mounted in any orientation, improving serviceability Colored coded inlet & outlet filter ports & valves for easy identification of water flow Quick connect 3/8" barb inlet/outlet ports Low pressure drop (less than 8 psi at 3.0 gpm) 50 psi pre-charge recommended for most beverage applications Part Number Description WB2-LVPO-01 Water boost/filter combo system for fountain dispenser, single filter cartridge WB2-LVPO-02 Water boost/filter combo system for fountain dispenser and ice machine, dual filter cartridges SS SHURlock kit: 1/2" FPT quick connect swivel ball valve, (2) 3/8" barb x 1/2" MPT LVPO-F1 starter kit: 5 micron carbon filter NSF 42, SHURlock 3/8" barb ball balve, filter brackets, QD-bypass LVPO-F2 starter kit: 5 micron sediment & phosphate filter NSF 42, SHURlock 3/8" barb ball balve, filter brackets, QD-bypass LVPO-F3 starter kit: 5 micron carbon & phosphate filter NSF 42, SHURlock 3/8" barb ball balve, filter brackets, QD-bypass LVPO-F4 starter kit: inline resin filter, SHURlock 3/8" barb ball balve, filter brackets, QD-bypass LVPO-F1, 5 micron carbon filter NSF 42, 3 GPM, 6000 gal life LVPO-F2, 5 micron sediment & phosphate filter NSF 42, 3 GPM, life depends on water conditions LVPO-F3, 5 micron carbon & phosphate filter NSF 42, 3 GPM, 6000 gal life LVPO-F4, inline resin filter,.5 GPM, 4400 grains or ppm PLF-1 inline 5 micron carbon filter NSF 42, 2 GPM, 5000 gal life WB2LVPO01 is designed for single fountain dispensers that serve less than 500 gals. of syrup per year. Service life of filter: 6, GPM. WB2LVPO02 has two filters; one that pressurizes and filters the water to a single dispenser that serves less than 500 gals. of syrup per year, and one that provides nonboosted treated water to the ice-maker. LVPO-F-1 (fountain filter) reduces particulates, chlorine, bad taste and odors. Service life: 6, GPM. LVPO-F-2 (ice filter) reduces particulates and inhibits lime scale build-up. Service life depends on the water conditions. SHURlock Fittings Double O-ring QD ball valve fittings SS LVPO starter kit LVPO-F1 LVPO-F2 LVPO-F3 LVPO-F4 Page E-15

16 SHURflo Water Booster Parts and Accessories Part Number Description LVPO filter brackets for tank mount, 1 pair LVPO filter brackets for slide track/wall mount, 1 pair LVPO filter to filter brackets, 1 pair LVPO filter QD-bypass SS Shurlock quick-connect swivel ball valves and SS fittings kit (picture page 15) Quick connect 1/2" FPT with SS rings ball 90 valve set: gray handle inlet, blue handle outlet Shurlock quick-connect, SS elbow fitting with 3/8 barb (picture page 15) Shurlock quick-connect, SS elbow fitting with 1/2 barb (picture page 15) Replacement bladder for SHURflo water booster oz. accumulator tank, metal mounting bracket, 1/2 FPT oz. accumulator tank, 125 psi gas pump, QD ports, no fittings Accumulator tank, 6 gal SS tank, side bracket, 116 psi, 1/2 FPT Accumulator tank, 2 gal SS tank, top bracket, 116 psi, 1/2 FPT Accumulator tank, 2 gal SS tank, side bracket, 116 psi, 1/2 FPT Tank pressure switch, 25 psi on/40 psi off, NPT ports Tank pressure switch, 25 psi on/40 psi off, FPT ports, 2' wire harness Tank pressure switch, 25 psi on/40 psi off, push fit connectors, 2' wire harness Tank pressure switch, 25 psi on/40 psi off, 3/8" push fit connectors, 2' wire harness Low pressure switch, 3 psi on / 8 psi off, FPT ports Low pressure switch, 3 psi on / 8 psi off, push fit connectors, 2' wire harness Swivel wingnut, nylon, 1/2"-15 FPT x 3/8" barb straight Swivel wingnut, nylon, 1/2"-15 FPT x 1/2" barb straight Swivel wingnut, nylon, 1/2"-15 FPT x 3/8" barb elbow Swivel wingnut, nylon, 1/2"-15 FPT x 1/2" barb elbow Additional SHURflo fittings can be found in the Syrup Section, Section C Quick connect 90 valve set Tank pressure switch SHURflo Water Pressure Reducer Valves (WPRV) Part Number Description SS 30 psi water pressure reducer valve, 3/8" SS barb inlet/outlet SS 50 psi water pressure reducer valve, 3/8" SS barb inlet/outlet SS 65 psi water pressure reducer valve, 3/8" SS barb inlet/outlet SS 80 psi water pressure reducer valve, 3/8" SS barb inlet/outlet NF 30 psi water pressure reducer valve, no fittings NF 50 psi water pressure reducer valve, no fittings NF 65 psi water pressure reducer valve, no fittings psi water pressure reducer valve with SS body, 3/8 SS barb inlet/outlet psi water pressure reducer valve with SS body, 3/8 SS barb inlet/outlet psi water pressure reducer valve with SS body, 3/8 SS barb inlet/outlet PG 50 psi WPRV SS body, pressure gauge, 3/8 SS barb inlet/outlet psi WPRV SS body, pressure gauge, 3/8 SS barb inlet/outlet psi WPRV SS body, pressure gauge, 3/8 SS barb inlet/outlet QC14 65 psi water pressure reducer valve, 1/4 John Guest fittings QC38 65 psi water pressure reducer valve, 3/8 John Guest fittings Page E-16 Water pressure reducer valve SS body Water pressure reducer valve Water pressure reducer valve, SS body and pressure gauge WPRV with John Guest fittings Continuing product improvements may necessitate changes without notice ABS

17 Aether Water Systems The new AETHER Water Systems Technology powered by BIOCON utilizes a unique and new foam product that truly is a first in the water filtration industry. Filters do not channel or cause pressure drop like other filters in the marketplace. The system will also ensure your sanitary compliance with federal, state and local regulatory health authorities. This technology is an integrated system that effectively controls your water issues from the retention tray to the effluent water. Features Reduces maintenance costs and repair time Extends the life of your equipment No channeling, minimal pressure drop, high flow rates of 5 GPM/10 GPM WQA Gold Seal certified for bacteria growth control Extremely effective scale inhibitor Reduces chlorine taste and odor Reduces heavy minerals, dirt and particles No polyphosphates Carbon Block Carbon block finely polishes water reducing extra fine dirt and particles as small as 5 micron in size, and reduces chlorine taste and odor and other offensive contaminants that can adversely affect the taste of water and beverages. Scale Control Scale control filters and systems will effectively control and treat hard scale build up in ice machines, fountain beverage systems, beverage combination systems, coffee, tea, espresso machines and all water related food service applications. Aether's technology contains no polyphosphates which only mask scale issues and does not effectively control hard scale issues and consequently effecting your food service equipment. Bacteria Control BIOCON is the only product on the market that is WQA certified for bacteria control in sump/retention trays for ice machines. BIOCON is a green product that utilizes reticulated foam powders, resins and nano technology which effectively controls chronic slime/mold/bacteria growth and ensures sanitary compliance with federal, state and local regulatory authorities; WQA certified to NSF/ANSI standard 61. Cylinders are natural, non-toxic, recyclable and sustainable technology. Combination systems are available in single, twin, triple or quad configurations Quality Water For Fountain Applications Biocon media inhibits the growth of bacteria, and reduces scale, chlorine taste and odor and other offensive contaminants. Nanofiber technology offers exceptionally high flow rates, efficiency, dirt holding capacity, particulate reduction less than one micron in size, and reduces health contaminants such as cyst. NSF Certified under NSF/ANSI Standards 42 and 53. Quality Water For Combination Applications One system provides premium quality water to high flow fountain, coffee and ice machines while inhibiting the growth of bacteria, reducing scale*, heavy minerals, chlorine and other contaminates. Nanofiber technology offers exceptionally high flow rates, efficiency, dirt holding capacity, particulate reduction less than one micron in size, and reduces health contaminants such as cyst. NSF Certified under NSF/ANSI Standards 42 and 53. Minimal pressure drop 20" prefilter reduces dirt and particles S10 cartridge inhibits scale buildup in ice machines and coffee brewers * Tested by manufacturer Page E-17

18 Aether Water Systems Page E-18 Single System Twin System Triple System Quad System Part Number Gallon Capacity GPM Flow Rate Micron Rating Pre-filter Model Size W x D x H" Media Application Single AWS-0091CF 9, No x 7 x Carbon Foam Fountain/Cold Drinks Single AWS-0141CB 14, No x 7 x Carbon Block Fountain/Cold Drinks Single AWS-0141PCB 14, Yes x 7 x 26 Carbon Block Combo Systems,Chloramines Single AWS-0145CB 14, No x 7 x Carbon Block Fountain/Cold Drinks Single AWS-0181CF 18, No x 7 x Carbon Foam Fountain/Cold Drinks Single AWS-020BC 20, No x 7 x 26 Bacteria Control Ice Single AWS-020PSB 20, Yes x 7 x 26 Scale Block Ice, Coffee, Hot Tea, Espresso Single AWS-020SB 20, No x 7 x 26 Scale Block Ice, Coffee, Hot Tea, Espresso Single AWS-030BC 30, No x 7 x 26 Bacteria Control Ice Single AWS-030SB 30, No x 7 x 26 Scale Block Ice, Coffee, Hot Tea, Espresso Single AWS-060BC 60, No x 7 x 26 Bacteria Control Ice Single AWS-060SB 60, No x 7 x 26 Scale Block Ice, Coffee, Hot Tea, Espresso Twin AWS-025BCCB 25, No x 7 x Bacteria+Carbon Block Fountain/Cold Drinks Twin AWS-025PCB 21, Yes x 7 x 26 Bacteria+Carbon Block Combo Systems,Chloramines Twin AWS-025PSB 25, Yes x 7 x 26 Scale+Carbon Block Ice, Coffee, Hot Tea, Espresso Twin AWS-025SBCB 25, No x 7 x 26 Scale+Carbon Block Ice, Coffee, Hot Tea, Espresso Twin AWS-035BCCB 35, No x 7 x Bacteria+Carbon Block Fountain/Cold Drinks Twin AWS-035SBCB 35, No x 7 x 26 Scale+Carbon Block Ice, Coffee, Hot Tea, Espresso Twin AWS-065BCCB 65, No x 7 x Bacteria+Carbon Block Fountain/Cold Drinks Twin AWS-065SBCB 65, No x 7 x 26 Scale+Carbon Block Ice, Coffee, Hot Tea, Espresso Triple AWS-035PCB 35, Yes x 7 x 26 Bacteria+Carbon Block Combo Systems,Chloramines Triple AWS-035PSB 35, Yes x 7 x 26 Scale+Carbon Block Ice, Coffee, Hot Tea, Espresso Triple AWS-090SBBCCB 90, No x 7 x 26 Scale+Bacteria+Carbon Combo Systems,Chloramines Triple AWS-090SBCB 90, No x 7 x 26 Scale+Bacteria+Carbon Ice, Coffee, Hot Tea, Espresso Triple AWS-125SBBCCB 125, No x 7 x 26 Scale+Bacteria+Carbon Combo Systems,Chloramines Triple AWS-125SBCB 125, No x 7 x 26 Scale+Bacteria+Carbon Ice, Coffee, Hot Tea, Espresso Quad AWS-065PCB 65, Yes 40.5 x 7 x 26 Bacteria+Carbon Block Combo Systems,Chloramines Quad AWS-065PSB 65, Yes 40.5 x 7 x 26 Scale+Carbon Block Ice, Coffee, Hot Tea, Espresso Quad AWS-175SBCB 175, No 40.5 x 7 x 26 Scale+Bacteria+Carbon Combo Systems,Chloramines Continuing product improvements may necessitate changes without notice ABS

19 Aether Cartridges/Kits for Manifolds Part Number Gallon Capacity GPM Flow Rate Micron Rating Description ACPBCC25 25, (1) Aether bacteria control (1) carbon block for AWS25BCCB ACPBCC35 35, (1) Aether bacteria control (1) carbon block for AWS35BCCB ACPBCC65 65, (1) Aether bacteria control (1) carbon block for AWS65BCCB ACPSBBCC , (1) Aether scale block (1) bacteria control (1) carbon block for AWS125SBBCCB ACPSBBCC , (2) Aether scale block (1) bacteria control (1) carbon block for AWS175SBBCCB ACPSBBCC90 90, (1) Aether scale block (1) bacteria control (1) carbon block for AWS90SBBCCB ACPSBC , (2) Aether scale block (1) carbon block for AWS125SBCB ACPSBC25 25, (1) Aether scale block (1) carbon block for AWS25SBCB ACPSBC35 35, (1) Aether scale block (1) carbon block for AWS35SBCB ACPSBC65 65, (1) Aether scale block (1) carbon block for AWS 65SBCB ACPSBC90 90, (2) Aether scale block (1) carbon block for AWS90SBCB AGSHC20 20, (1) Aether scale block AGSHC30 30, (1) Aether scale block AGSHC60 60, (1) Aether scale block ASBCFC20 20, (1) Aether bacteria control ASBCFC30 30, (1) Aether bacteria control ASBCFC60 60, (1) Aether bacteria control AWS , (1) carbon block AWS , (1) carbon block AWSFC18 18, (1) foam carbon AWSFC9 9, (1) foam carbon AWSS14 14, (1) sediment/turbidity pre-filter Aether Cartridges for Everpure Heads Part Number Gallon Capacity GPM Flow Rate Micron Rating Description AWS-EVP1 14, (1) EVP carbon block AWS-EVP1BC 18, (1) EVP bacteria control AWS-EVP1FC 9, (1) EVP carbon foam AWS-EVP1SB 20, (1) EVP scale block AWS-EVP5 14, (1) EVP carbon block AWS-EVP5FC 18, (1) EVP carbon foam Page E-19

20 Aether Cartridges/Cylinders for Drop-In Sumps Part Number Gallon Capacity GPM Flow Rate Micron Rating Anti bacteria cartridge Carbon cartridge Scale cartridge Ice machine cartridge Description AFC-B20 20, (1) 20" foam bacteria control cartridge AFC-B30 30, (1) 20" foam bacteria control cartridge AFC-B60 60, (1) 20" foam bacteria control cartridge AFC-DISC18 9, (1) 20" carbon foam cartridge AFC-DISC9 9, (1) 10" carbon foam cartridge AGC-S20 20, (1) 20" scale block cartridge AGC-S30 30, (1) 20" scale block cartridge AGC-S60 60, (1) 20" scale block cartridge BCC-006 N/A N/A N/A (1) cylinder for ice machine sump, 90 days for ice machines under 1200# per day BCC-007 N/A N/A N/A (1) cylinder for ice machine sump, 180 days for ice machines # per day BCD-005 N/A N/A N/A (1) cylinder for ice machine sump, 90 days for ice machines over 1200# per day Aether Manifold Heads Single stage manifold head Part Number AWS-ITSDUO10 AWS-ITSDUO20 AWS-ITTDUO20 AWS-ITTMD20 AWSMH001 AWSMH002 AWSMH003 AWSMH004 Description (1) 10" single stage drop-in sump manifold head with gauge (1) 20" single stage drop-in sump manifold head with gauge (1) 20" twin stage drop-in sump manifold head with gauge (1) 20" triple stage drop-in sump manifold head with gauge (1) single stage quick connect manifold head with gauge (1) twin stage quick connect manifold head with gauge (1) triple stage quick connect manifold head with gauge (1) quad stage quick connect manifold head with gauge Twin stage manifold head Triple stage manifold head Page E-20 Continuing product improvements may necessitate changes without notice ABS

21 3M Water Filtration Products for Multi-Equipment Applications The High Flow Series can meet the filtration needs of an entire foodservice establishment or address specific applications one at a time. A one-cartridge High Flow system with Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media delivers recipe quality water of up to 5 gallons per minute, lasts 6 months, and accomplishes what was previously the job of a three- or four-cartridge system. The High Flow Series provides unprecedented cyst and bacteria reduction, sediment holding, chlorine taste and odor reduction and scale inhibition. Integrated Membrane Pre-Activated Dual Port (DP) and Dual Flow (DF) Systems for Multiple Applications Two separate streams exit the manifold. Both streams have reduced sediment and chlorine taste and odor. One stream has added scale inhibition media from a dedicated cartridge to help reduce the ability of calcium and magnesium to adhere as hard scale on the evaporator plates of an ice machine and/or the heating coils of a coffee brewer. The second stream supplies cold beverage dispensers and includes no added scale inhibitor. Carbon Technology ( IMPACT ) media provides nearly 6 times the filtration surface area, and reduction of up to 99.99% of common water-borne heterotrophic bacteria as tested by 3M Purification Inc., as well as Cryptosporidium and Giardia cysts. No activation steps are required, and for most water, no pre-filter is needed. Change-outs are fast and easy with the Sanitary Quick Change (SQC) encapsulated cartridge design. Most cartridge materials are NSF Std. 42 and/or CRF-21 compliant and certified by NSF to Std. 53 for cyst reduction. DP190 DP290 DP390 Part Number Gallon Capacity GPM Flow Rate Micron Rating Fountain/Cold Cup Coffee/Tea/Hot Cup Espresso/Cappacino Ice Machine Case Qty. Replacement Cartridge Model Reduces DP , X X X Cyst1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 Bacteria, bacteriostatic, chlorine taste & odor, DP , X X X cyst, scale, sediment DP , X X X Cyst1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 DP , X X X Cyst1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested with E. Coli ATCC (11229) by 3M Purification Inc. Not tested or certified by NSF International. 3 As tested and verified by Manufacturer s Laboratory *Beverage flow rate is 2.66 GPM, ice machine flow rate is 5 GPM. Page E-21

22 3M Water Filtration Products for Cold Beverages Cold beverages are often the most profitable part of convenience stores, restaurants and quick-service operations. For these high-volume cold beverage applications, High Flow filters deliver enough Recipe Quality Water to make more than 432,000 soft drinks (16 oz. soft drinks in 22 oz. cups) with a single cartridge. High Flow catridge filters deliver the improved performance of Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media. A single High Flow cartridge system replaces a three- or four-cartridge manifold system, lowering capital and operating costs. Part Number Gallon Capacity BEV130 BEV135 GPM Flow Rate Micron Rating Fountain/Cold Cup All systems on this page deliver sediment and chlorine taste and odor reduction. BEV130 (std. 42 & 53) and BEV135 (std. 42) contain media wrapped carbon-block only. BEV140, BEV160 and BEV190 systems include Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria 2 reduction, and are NSF std. 42 and 53. BEV135, BEV145, BEV165 and BEV195 systems are designed for high turbidity water, but not cyst or bacteria reduction, and are std. 42 only. All have NSF and/or FDA CFR-21 compliant materials. Case Qty. BEV160 BEV165 Replacement Cartridge BEV190 BEV195 Model Reduces BEV , X Sediment 3, chlorine taste & odor BEV , X Cyst1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor BEV , X Sediment 3, chlorine taste & odor BEV , X Cyst1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor BEV , X Sediment 3, chlorine taste & odor BEV , X Cyst1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor BEV , X Sediment 3, chlorine taste & odor 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested with E. Coli ATCC (11229) by 3M Purification Inc. Not tested or certified by NSF International. 3 As tested and verified by Manufacturer s Laboratory Page E-22 Continuing product improvements may necessitate changes without notice ABS

23 3M Water Filtration Products for Ice Machines Scale build-up on evaporator plates can significantly increase maintenance costs. 3M Water Filtration Products for ice machines provide built-in scale inhibition as well as chlorine and sediment reduction, which reduce service calls and downtime, yield consistent product, and increase customer satisfaction. ICE265-S Part Number ICE190-S Gallon Capacity GPM Flow Rate ICE120-S Micron Rating HF Cubers Lbs. ICE140-S LF Cubers Lbs. Flakers Lbs. Case Qty. Replacement Cartridges Model Reduces ICE120-S , HF20S Cyst1, sediment 3, chlorine taste & odor, scale 3 ICE125-S , HF25S Sediment3, chlorine taste & odor, scale 3 ICE140-S , HF40S Cyst 1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 ICE145-S , HF45S Sediment3, chlorine taste & odor, scale 3 ICE160-S , HF60S Cyst 1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 ICE165-S , HF65S Sediment3, chlorine taste & odor, scale 3 ICE190-S , >1000 >1450 > HF90S Cyst 1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 ICE195-S , >1000 >1450 > HF95S Sediment3, chlorine taste & odor, scale 3 ICE260-S , ICE265-S , ICE120-S (std. 42 & 53) and ICE125-S (std. 42) contain carbonblock media only. ICE140-S, ICE160-S, ICE190-S and ICE260-S include Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria 2 reduction, and are NSF std. 42 and 53. For higher turbidity waters, the media in ICE145-S, ICE165-S, ICE195-S and ICE265-S systems are specifically designed to provide cartridge and system life, but not cyst or bacteria reduction, and are std. 42 only. All have NSF and/or FDA CFR-21 compliant materials. (2) HF60S Cyst 1, bacteria 2, bacteriostatic, sediment 3, chlorine taste & odor, scale 3 (2) HF65S Sediment3, chlorine taste & odor, scale 3 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested with E. Coli ATCC (11229) by 3M Purification Inc. Not tested or certified by NSF International. 3 As tested and verified by Manufacturer s Laboratory Page E-23

24 3M Water Filtration Products for Hot Beverages High Flow Series products for hot beverage applications reduce excess sediment and chlorine that cause bitter taste and clog spray heads. If not filtered, these elements can wreak havoc on your equipment and lead to expensive repair and replacement costs. BREW 120 Page E-24 BREW 130 Part Number ESP 124 Gallon Capacity SGP 165 GPM Flow Rate Micron Rating CFSTSD Coffee/Hot Cup Espresso/Capp./Tea When scale is an issue, High Flow BREW systems add scale inhibitor to prevent calcium and magnesium build-up that can significantly decrease efficiency and increase maintenance costs. ESP and ScaleGARD Pro (SGP) systems reduce calcium and magnesium ions by ion exchange (water softening) for crystal clear iced tea and excellent bean extraction for espresso and espresso-based beverages. ESP and SGP systems do not need a drain, electrical connection or salt regeneration. All have NSF and/or FDA CFR-21 compliant materials. Case Qty. Replacement Cartridge(s) Model Reduces BREW105-MS , X 8 HF05MS Sediment 2, chlorine taste & odor, scale 2 BREW110-MS , X 8 HF10MS Cyst 1, sediment 2, chlorine taste & odor, scale 2 BREW115-MS , X 8 HF15MS Sediment 2, chlorine taste & odor, scale 2 BREW120-MS , X 6 HF20MS Cyst 1, sediment 2, chlorine taste & odor, scale 2 BREW125-MS , X 6 HF25MS Sediment 2, chlorine taste & odor, scale 2 BREW130-MS , X 4 HF30MS Cyst 1, sediment 2, chlorine taste & odor, scale 2 BREW135-MS , X 4 HF35MS Sediment 2, chlorine taste & odor, scale 2 ESP114-T* gr..5 N/A X Hardness (softens), chlorine taste & odor ESP124-T* ,100 gr..5 N/A X Hardness (softens), chlorine taste & odor SGP124BN-T* N/A X Hard scale 2, chlorine taste & odor SGP165BN-T* N/A X Hard scale 2, chlorine taste & odor SGP195BN-T* ,200 1 N/A X Hard scale 2, chlorine taste & odor CFSTSD , X X Sediment 2, chlorine taste & odor SF , Steam Table Sediment 2, chlorine taste & odor, scale 2 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested and verified by Manufacturer s Laboratory *Systems not NSF listed Continuing product improvements may necessitate changes without notice ABS

25 3M Water Filtration Products for Hot Beverages - Reverse Osmosis For optimum flavor it is recommended that filtered water contain ppm of Total Dissolved Solids (TDS) for coffee and about 50 ppm for espresso. Designed for water conditions with high TDS and/or hardness, the TFS450 reverse osmosis (RO) water filtration system is ideal. RO is the tightest of all filtration processes, removing about 90% of all contaminants and providing the greatest equipment protection. The TFS450 has a blending feature that allows you to blend back just the right amount of TDS (from 10-50% of incoming feed water) into the water to satisfy both needs; equipment protection and customer satisfaction. With conventional RO systems the waste water can be 2-4 times the volume of the filtered water. For the production of 100 gallons of filtered water the TFS450 conserves up to 250 gallons of water per day - over 90,000 gallons per year - than conventional RO systems. Features: Makes 300 gal/day without blending*, and up to 600 gal/ day of blended water Blending valve (with lock) adjusts the desired amount of TDS, and online meter monitors product water TDS level Keeps running during high demand periods and power outages with automatic non-electric bypass All product water (including bypass) is pre- and postfiltered Change-outs are fast and easy with Sanitary Quick Change (SQC) disposable cartridges Compact, uses very little space, and is easy to install Optional pumping module is available for low inlet water pressure areas The TFS450 requires an external storage tank. TFS450 Model Part Number TFS Gallon Capacity 300 gpd without blending 600 gpd with blending Micron Rating Coffee/Hot Cup Espresso/Capp./Tea Case Qty. Replacement Cartridge(s) Reduces.0005 X X Cysts 1, sediment 2, chlorine taste & odor, TDS 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested and verified by Manufacturer s Laboratory *at 77 F and 70 psi. Page E-25

26 3M Replacement Cartridges for 3M Water Filtration Systems Gallon Capacity GPM Flow Rate Micron Rating Part Number Model Reduces CFS517LS 3, Sediment 3, chlorine taste and odor CFS117 10, Chlorine taste & odor CFS117S 10, Sediment 3, chlorine taste and odor, scale CFS717 1, Sediment 3, chlorine taste and odor, scale CFS420MF N/A N/A 5 24 Sediment 3, scale CFS9110 N/A Sediment CFS9110S N/A Sediment 3, scale * SWC9135 1,350 gr..5 N/A 4 Scale 3 (softens water) * SWC9135C 1,100 gr Chlorine taste and odor, scale 3 (softens water) CFS , Sediment 3, chlorine taste and odor CFS8112-S 10, Sediment 3, chlorine taste and odor, scale CFS8112ELS 12, Sediment 3, chlorine taste and odor, scale HF8-S N/A 6.0 N/A 10 Scale CFS8000-S N/A 1.5 N/A 6 Scale CFS9720S 4, Sediment 3, chlorine taste and odor, scale CFS9720 4, Sediment 3, chlorine taste and odor CFS9720EL 5, Sediment 3, chlorine taste and odor CFS9720ELS 5, Sediment 3, chlorine taste and odor, scale CFS9710S 2, Sediment 3, scale CFS9112S 10, Sediment 3, chlorine taste and odor, scale CFS , Sediment 3, chlorine taste and odor CFS9112EL 12, Sediment 3, chlorine taste and odor CFS9112ELS 12, Sediment 3, chlorine taste and odor, scale CFS8720-S 4, Sediment 3, chlorine taste and odor, scale CFS215-2 N/A N/A 5 4 Sediment 3, chlorine taste and odor CFS217H 2, Chlorine taste & odor CFS9005IMF N/A N/A N/A 12 Scale SWC1350-C 1100 gr Chlorine taste and odor, scale 3 (softens water) CFS8812X 9, Cyst 1, sediment 3, chlorine taste and odor CFS8812X-S 9, Cyst 1, sediment 3, chlorine taste and odor, scale CFS8812ELX 14, Cyst 1, sediment 3, chlorine taste and odor CFS8812ELX-S 14, Cyst 1, sediment 3, chlorine taste and odor, scale CFS9812X 9, Cyst 1, sediment 3, chlorine taste and odor CFS9812XS 9, Cyst 1, sediment 3, chlorine taste and odor, scale CFS9812ELX 14, Cyst 1, sediment 3, chlorine taste and odor CFS9812ELXS 14, Cyst 1, sediment 3, chlorine taste and odor, scale 3 Case Qty. Sorted by Part Number 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested with E. Coli ATCC (11229) by 3M Purification Inc. Not tested or certified by NSF International. 3 As tested and verified by Manufacturer s Laboratory *Systems not NSF listed Page E-26 Continuing product improvements may necessitate changes without notice ABS

27 3M Replacement Cartridges for 3M Water Filtration Systems Gallon Capacity GPM Flow Rate Micron Rating Case Qty. Sorted by Part Number Part Number Model Reduces AP817 N/A Sediment 3, chlorine taste and odor SF18-S N/A 6 N/A 6 Scale HF05-MS 1, Sediment 3, chlorine taste and odor, scale HF10-MS 3, Cyst 1, sediment 3, chlorine taste and odor, scale HF15-MS 3, Sediment 3, chlorine taste and odor, scale P124BN* 423@ 10 gr..5 N/A 4 Hardness, chlorine taste and odor PS124* 1,100 gr..5 N/A 4 Hardness, chlorine taste and odor PS114* 700 gr..5 N/A 6 Hardness (softens), chlorine taste and odor CFS110 Varies N/A N/A 24 Sediment (improves clarity) HF40 25, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor HF40-S 25, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor, scale HF45 25, Sediment 3, chlorine taste and odor HF45-S 25, Sediment 3, chlorine taste and odor, scale HF60 35, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor (2) HF60-S 70, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor, scale HF65 35, Sediment 3, chlorine taste and odor (2) HF65-S 70, Sediment 3, chlorine, taste and odor, scale HF90 54, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor HF90-S 54, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor, scale HF95 54, Sediment 3, chlorine taste and odor HF95-S 54, Sediment 3, chlorine taste and odor, scale DP190-CARTPAK 54, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor, scale DP290-CARTPAK 108, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor, scale DP390-CARTPAK 162, Cyst 1, bacteria 2, sediment 3, chlorine taste and odor, scale DF290CL-CARTPAK 25, /5.2 1 Cyst 1, bacteria 2, sediment 3, chloramine, chlorine taste and odor, scale SF165-CARTPAK 35, Sediment 3, chlorine taste and odor, scale DP260 70, Bacteria 2, bacteriostatic, chlorine taste & odor, cyst, scale 3, sediment P195BN* 1200@ 9 gr. 1 N/A 1 Hardness, chlorine taste and odor HF20-S 9, Cyst 1, sediment 3, chlorine taste and odor, scale HF30 14, Cyst 1, sediment 3, chlorine taste and odor HF30-S 14, Cyst 1, sediment 3, chlorine taste and odor, scale HF20-MS 9, Cyst 1, sediment 3, chlorine taste and odor, scale HF30-MS 14, Cyst 1, sediment 3, chlorine taste and odor, scale HF25-S 10, Sediment 3, chlorine taste and odor, scale HF35 12, Sediment 3, chlorine taste and odor HF25-MS 10, Sediment 3, chlorine taste and odor, scale 3 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested with E. Coli ATCC (11229) by 3M Purification Inc. Not tested or certified by NSF International. 3 As tested and verified by Manufacturer s Laboratory *Systems not NSF listed Page E-27

28 3M Replacement Cartridges for 3M Water Filtration Systems Page E-28 Gallon Capacity GPM Flow Rate Micron Rating Part Number Model Reduces HF35-MS 12, Sediment 3, chlorine taste and odor, scale HF27 4, Sediment 3, chlorine taste and odor P165BN* 719@ 9 gpg 1 N/A 1 Hardness, chlorine taste and odor AP810 N/A Sediment CFS210-2 N/A Sediment AP110 N/A Sediment 3, scale TFS450 N/A Cysts 1, sediment 2, chlorine taste & odor, TDS CFS9110 N/A Sediment CFS9812X 9, Cyst 1, sediment 3, chlorine taste and odor 1 Contains Integrated Membrane Pre-Activated Carbon Technology ( IMPACT ) media for cyst and bacteria reduction. Tested by manufacturer. 2 As tested with E. Coli ATCC (11229) by 3M Purification Inc. Not tested or certified by NSF International. 3 As tested and verified by Manufacturer s Laboratory *Systems not NSF listed 3M Replacement Filters for Everpure Heads Gallon Capacity GPM Flow Rate Micron Rating Case Qty. Sorted by Part Number 9000 Series cartridges fit all Everpure heads, both old and new style Part Number Model Reduces CFS9110 N/A Sediment CFS9110S N/A Sediment 3, scale CFS9720S 4, Sediment 3, chlorine taste and odor, scale CFS9720 4, Sediment 3, chlorine taste and odor CFS9720EL 5, Sediment 3, chlorine taste and odor CFS9720ELS 5, Sediment 3, chlorine taste and odor, scale CFS9710S 2, Sediment 3, scale CFS9112S 10, Sediment 3, chlorine taste and odor, scale CFS , Sediment 3, chlorine taste and odor CFS9112EL 12, Sediment 3, chlorine taste and odor CFS9112ELS 12, Sediment 3, chlorine taste and odor, scale CFS9005IMF N/A N/A N/A 12 Scale CFS9812X 9, Cyst 1, sediment 3, chlorine taste and odor CFS9812XS 9, Cyst 1, sediment 3, chlorine taste and odor, scale CFS9812ELX 14, Cyst 1, sediment 3, chlorine taste and odor CFS9812ELXS 14, Cyst 1, sediment 3, chlorine taste and odor, scale CFS9110 N/A Sediment CFS9812X 9, Cyst 1, sediment 3, chlorine taste and odor Case Qty. Continuing product improvements may necessitate changes without notice ABS

29 3M Replacement Parts for 3M Water Filtration Systems Part Number Description M/Cuno 20 gal tank M/Cuno AP802 plastic housing sump M/Cuno 3/8 FPT, valve in head w/shroud and gauge M/Cuno 3/8 FPT, valve in head w/shroud and plug M/Cuno 3/8 FPT, valve in head w/shroud and flat head M/Cuno 1/2 FPT non-valved high flow head NH3 w/gauge M/Cuno 1/2 FPT high flow head NH3, no gauge port, 5 GPM M/Cuno DP2 twin manifold assy C 3M/Cuno CFS02, prefilter, housing only, M/Cuno housing AP101T, AP11T C Page E-29

30 Bottled Water Dispenser At just 6" x 8" the Flojet Single Inlet Bottled Water Dispensing System is compact, affordable and perfect for dispensing bottled water to coffee machines, beverage dispensers, vending machines and carts in remote locations where water supply is inaccessible. This system has a universal seal cap, float switch for automatic shut-off when bottle is empty, built-in check valve to prevent backflow, and a 20' long 1/4" OD discharge hose. Available in single or dual inlet. The dual inlet model has a T to draw from two bottles simultaneously, and is available with appliance controller interface. Flow rate: 1.0 GPM. Maximum pressure: 40 psi. Part Number BW1000A BW A BW A A B C Description Single inlet economy, 1 GPM pump, 115 Volt, 20' discharge hose 1/4" OD Single inlet, 1 GPM pump, 115 Volt, 20' discharge hose 1/4" OD Dual inlet, 1 GPM pump, 115 Volt, 20' discharge hose 1/4" OD Dual inlet suction kits (convert single inlet to dual inlet) Single inlet suction hose replacement kit Auxiliary suction tube (no float) replacement kit BW A BW1000A Aether is a trademark of Biocon USA, Inc., Las Vegas, Nevada, a wholly owned subsidiary of Biocon Limited, India. Lancer is a registered trademark of Lancer Corporation, San Antonio, Texas. SHURflo is a registered trademark of SHURflo, LLC, Cypress, California, a subsidiary of Pentair, Ltd., Schaffhausen, Switzerland. McCann s is a registered trademark of McCann s Engineering, a Manitowoc Company, Los Angeles, California. Procon is a registered trademark of Procon Products, Standex International Corporation, Murfreesboro, Tennessee. Fluid-o-Tech is a registered trademark of Fluid-o-Tech International, Inc., Plantsville, Connecticut. Triplex, Duplex and Flojet are registered trademarks of Flojet, Irvine, California, a subsidiary of Xylem, Hertfordshire, United Kingdom. CUNO, ScaleGARD, and Recipe Quality Water are trademarks of CUNO Incorporated, a 3M Company, Meriden, Connecticut. 3M is a trademark of 3M Company, St. Paul, Minnesota. Page E-30 Continuing product improvements may necessitate changes without notice ABS