Janice T. DeVelasco, P.E.

Transcription

1 Janice T. DeVelasco, P.E., Page 1 Janice T. DeVelasco, P.E. Summary Over 31 years of diverse professional health, safety and environmental experience in industry, encompassing refining, petrochemicals, base oils and lubricants manufacturing, terminal operations, pipeline operations, crude gathering and nitrogen fertilizers. Janice has demonstrated leadership, planning, organization, communication, interpersonal, and negotiating skills. She has extensive experience in Health, Safety and Environmental regulatory compliance, management system development and implementation, management system and compliance auditing and work with environmental agencies at the local, state and federal level. Janice s expertise is diverse and includes: process safety management program development, implementation of PSM and RMP requirements, procedure development and program implementation for safety, industrial hygiene, maintenance, operations, mechanical integrity, and equipment inspection, management of HSE due diligence for large divestitures, facility siting studies, guidance and support for enforcement and litigation, refinery BWON programs, preparation and review of SPCC and Facility Response Plans, RCRA permitting, wastewater permitting, emergency response and management plans, development of waste minimization and recycling programs, implementation of hazardous waste, PCB, and asbestos management programs, including impoundment and land treatment closures, groundwater monitoring, and underground storage tank removals. Process Safety Management Management System and Compliance Auditing HSE Management Systems Federal and State Regulatory Compliance Due Diligence SPCC Plans Key Expertise

2 Janice T. DeVelasco, P.E., Page 2 Experience Consulting Refining management systems development to enhance Process Safety Management programs and work processes. Work involved multiple PSM elements, including: Management of Change, Incident Investigation, Mechanical Integrity, Pre-Startup Safety Review, Process Hazard Analysis, Process Safety Information, Operating Procedures, Emergency Planning and Response, and Compliance Auditing. Specific area of assistance includes the following work areas: PSM/RMP Implementation Assessment Management of Change Pre-Startup Safety Review Incident Investigation Process Safety Information Process Hazard Analysis Mechanical Integrity o Pressure Vessel Inspections o Piping Inspection o Covered Process Equipment o Anomalous Thickness Readings o Leak Repair Devices o Liner Inspections o Ultra Pipe Procedures o Equipment Deficiencies o Corrosion Under Insulation o Quality Assurance Program Operating Procedure Certification Engineering Standards o P&ID Revisions o Drafting Standard o Emergency Isolation Valves o Pump Seals o Alarm Management Facility Siting Study Update Building Management Confined Volume Reduction New Process Unit New Construction Covered Process PHA Recommendation Management MOC Hazard Reviews

3 Janice T. DeVelasco, P.E., Page 3 Toxics Modeling Project Emergency Response Plan and Action Plan OSHA NEP Assistance Risk Management Plan Development RMP Enforcement Resolution Refining management systems development to enhance Process Safety Management programs and work processes. Work involved multiple PSM elements, including: Management of Change, Incident Investigation, Mechanical Integrity, Pre-Startup Safety Review, Process Hazard Analysis, Process Safety Information, Operating Procedures, Emergency Planning and Response, and Compliance Auditing. Specific area of assistance includes the following work areas: PSM/RMP Implementation Assessment Management of Change Pre-Startup Safety Review Incident Investigation Process Safety Information Process Hazard Analysis Mechanical Integrity o Pressure Vessel Inspections o Piping Inspection o Covered Process Equipment o Anomalous Thickness Readings o Leak Repair Devices o Liner Inspections o Ultra Pipe Procedures o Equipment Deficiencies o Corrosion Under Insulation o Quality Assurance Program Operating Procedure Certification Engineering Standards o P&ID Revisions o Drafting Standard o Emergency Isolation Valves o Pump Seals o Alarm Management Facility Siting Study Update Building Management Confined Volume Reduction New Process Unit New Construction Covered Process PHA Recommendation Management

4 Janice T. DeVelasco, P.E., Page 4 MOC Hazard Reviews Toxics Modeling Project Emergency Response Plan and Action Plan OSHA NEP Assistance Risk Management Plan Development RMP Enforcement Resolution Industrial Hygiene and Safety Procedures: Procedure development and implementation. Auditing: PSM and RMP Compliance Audits, Safety Compliance Audits, Environmental Compliance Audits, Management System Audits. Due Diligence: Process Safety, Safety, and Security due diligence for three refinery divestitures. SPCC Plan Development and Certification: Plans for refining and crude gathering & storage facilities. Design for new containment and enhanced containment areas. Industry Environmental Compliance Consent Decree: Assisting a major petroleum company in providing leadership and advise on all aspects of environmental complaince programs and business functions. Administered compliance of Global Consent Decree for six refineries. Managed reporting requirement for periodic and semi-annual reporting required by Global Consent Decree Health, Safety and Environmental: Review and Assessment Manager: Progressively increasing responsibilities in a multi-faceted role for health, safety, and environmental matters. Integrated HSE issues into business functions and decision making. Developed and managed HSE due diligence activities and particpated in negotiations on acquisitions and divestitures totaling $5+ billion. Developed, implemented and managed HSE compliance and management system auditing program, including refinery process safety management compliance auditing, for five refineries, lubricants manufacturing plant, two lubricant packaging plants, 54 fuel terminals, aircraft jet fueling operation, truck transportation fleet, crude gathering, and pipeline operations. Assisted with development and implementation of PSM and RMP requirements at five refineries. Participation in high profile agency discussions. Prepared, reviewed and certified SPCC Plans. Refinery Planning and Economics: Economic Analyst: Responsible for refinery feedstock selection, crude blending, and plant production optimiation. Evaluated refinery operating configurations to meet marketing forecasts, forecasted feestocks crude, naphtha, gas oil and coker feed. Developed LP sub-models to predict plant (fuels and petrochemicals) yields. Developed utility conservation program and tracking tool for tank emission compliance. Refinery HSE: Environmental Engineer: Responsible for all aspects of environmental management at integrated refining complex: refinery, petrochemical plant, marine terminals, bulk tank terminal, and pipelines, and additional responsibilities for six product terminals in three states. Janice interfaced with state and federal agencies for all regulatory programs. She is

5 Janice T. DeVelasco, P.E., Page 5 recognized for leadership and implementation of refinery environmental programs culminating in receipt of EPA Region VI Environmental Excellence Award. Supervised all hazardous waste, PCB, and asbestos management activities, including impoundment and land treatment closures, as well as fugitive monitoring, groundwater monitoring, waste dewatering project, and underground storage tank removals. Janice managed implementation/ operation of extensive hydrocarbon recovery project, prepared applications and obtained RCRA, wastewater, and air permits. She worked jointly with Safety and Industrial Hygiene on chemical evaluations, personnel exposure monitoring, development of MSDS, and asbestos abatement. Janice promoted use of alternate chemicals with less exposure potential to personnel and environment. Refinery Technical Services: Process Engineer: Responsible for hydrotreating and catalytic reforming units. Monitored operations, developed engineering projects, and turnaround support. Janice managed efficiency program for all fired heaters, developed emissions inventory program, relief system/valve inspection program, and tank emission program. MBA, Texas A&M Corpus Christi, TX 1986 BS, Chemical Engineering, University of Oklahoma 1981 Education Licensed Professional Engineer, Texas, #74936 Certified Professional Environmental Auditor # Professional Registrations