Mill, Disc, with Stone Plate STANDARD OPERATING PROCEDURE

Size: px
Start display at page:

Download "Mill, Disc, with Stone Plate STANDARD OPERATING PROCEDURE"

Transcription

1 STANDARD OPERATING PROCEDURE Mill, Disc, with Stone Plate Model: LV15K Manufacturer: Glen Mills Incorporated Location: Dry Processing Pilot Plant, 1851 Food Sciences Building Publication Date: 07/23/14 Iowa State University does not discriminate on the basis of race, color, age, ethnicity, religion, national origin, pregnancy, sexual orientation, gender identity, genetic information, sex, marital status, disability, or status as a U.S. veteran. Inquiries regarding non-discrimination policies may be directed to Office of Equal Opportunity, 3350 Beardshear Hall, 515 Morrill Road, Ames, Iowa 50011, Tel , eooffice@iastate.edu.

2 Description and Uses Glen Mills Toothed-Disc Mill, Model LV15K, is a typical mill used for grinding various grains. It is simple to operate and easy to clean. The mill is a disc-type grinder with an adjustable grinding particle size. The mill is equipped with 8 different tooth-shaped, stainless steel grinding discs that are interchangeable depending upon the application. The degree of fineness depends on the clearance between the grinding discs. The mill has a starter with a safety switch and comes with a nylon collection bag. Power Specifications Motor: Siemens 3 Mot 1LA5090-4AA90 (3-Phase) Power: 1.1 kw Voltage :220V/440V Speed/Frequency: 3, Hz. Potential Hazards and Safety Precautions Electric Shock/High Voltage (220V/440V) Make certain to use the correct outlet that is specifically designed to fit the electrical cord plug. Make sure the area around the outlet, floor and your hands are completely dry when plugging or unplugging the electrical cord to/from the outlet. Sharp, Rotating Grinding Plates/Abrasions, Cuts, or Severed Body Parts Do not insert hands, fingers or other body parts into the hopper or the product discharge shoot while the mill is in operation. The teeth are sharp and abrasive! Use extra caution by unplugging the mill when cleaning its interior or changing/adjusting the toothed grinding discs. Mechanical Pinch Points/Possible Entanglement of Extremities, Hair, Jewelry or Clothing Do not use any tool to assist product flow through the hopper or discharge shoot, as serious injury may result. Make sure to secure long hair and any loose clothing or jewelry before operating the mill. Nothing, except the material for which the mill is intended to grind, should ever be placed into the hopper while the mill is running. Flying Debris/Potential Eye Damage Do not operate the mill without wearing all required personal protective equipment, including safety goggles. 2

3 Required Personal Protective Equipment Lab Coat Dust Mask Safety Goggles Hair Net (Tie Back Long Hair) Ear Protection No Open-toed or Open-heeled Shoes Long Pants and Sleeves No Loose Fitting Clothing Training Required Training (*denotes courses offered online) Fire Safety & Extinguisher Training* Laboratory Safety: Core Concepts* Machine & Site Specific Training Recommended Training for Frequent Users (*denotes courses offered online) Electrical Safety & Lockout/Tagout Safeguarding Mechanical Hazards Shop Safety Fundamentals: Basic Procedures & Policies* Operation 1. Be sure to wear all required personal protective equipment as listed. 2. Be sure to familiarize yourself with the Operating Instructions Manual available for this machine before operating the mill. The manual is located in the pilot plant office, 1955 Food Sciences Building. 3. Check with the pilot plant manager to determine whether or not you have the correct grinding disc installed for your application and desired product results. If not, the grinding discs must be carefully changed under the direction of the pilot plant manager. Note: Be sure to safely unplug the mill before changing the disc. 4. Once you have ascertained that the correct grinding disc is installed as per your application, safely plug the electric power cord into the correct outlet specifically designed to fit the plug. Note: Make sure the area around the outlet, floor and your hands are completely dry when plugging or unplugging the electrical cord to/from the outlet. 3

4 5. Before starting the mill, make sure that the mill is positioned properly on a level surface and in an unconfined space. Note: When properly positioned, the user should be able to move freely around the mounting cart with ease and with no obstructions. 6. To switch on the power supply, turn the RED Power knob clockwise to the ON position (see Figure 1). 7. To adjust the particle size of the final product, first turn the Lock Control knob to the left to unlock. Adjust the particle size by turning the Particle Size Control knob. Turn the control knob to the right to create courser products; left to create finer products (see Figure 2). 8. After adjusting the Particle Size Control knob to the desired gap setting, turn the Lock Control knob to the right to lock the particle size gap setting in place (see Figure 2). 9. Place an empty container beneath the discharge shoot to collect the ground product. Note: The discharge shoot is located directly beneath the installed grinding discs. If available, you may use the nylon collection bag to retrieve your ground product. 10. Start the mill by pressing the ON ( I ) button (refer to Figure 1). 11. Begin feeding materials into the hopper (refer to Figure 2). Note: Adjust your feed rate low enough so as to not jam up the mill. Do not use any tool to assist product flow through the hopper or discharge shoot, as serious injury may result. 12. Continue to slowly feed materials into the hopper until the material to be ground is exhausted. Note: Be sure to report any operational difficulties directly to the pilot plant manager. 13. When operation is completed, turn off the mill by pressing the OFF ( O ) button (refer to Figure 1). 14. Turn off the power supply by turning the RED Power knob counterclockwise to the OFF position. 15. Safely unplug the electrical power cord from the outlet. Note: Make sure the area around the outlet, floor and your hands are completely dry when plugging or unplugging the electrical cord to/from the outlet. 16. Initiate clean-up procedures. ON/OFF Button Hopper Power Knob Figure 1 Particle Size Control: To the right course To the left fine Lock Control: To the right lock To the left unlock Figure 2 4

5 Clean-up Procedures Please note that these clean-up procedures are for non-transgenic grains only. Transgenic material has a separate, more thorough clean-up procedure, as all transgenic material must be accounted for. For more information, see special standard operating procedures (SOP) for the handling of transgenic material. 1. Be sure that the mill is unplugged before initiating any clean-up procedures. 2. Loosen the knobs that secure the cover plate in place and carefully remove the cover plate. 3. Remove all debris from the hopper, cover plate, grinding discs, all internal and external components of the mill, and mounting cart using a brush and a pressurized air hose. 4. Sweep up all debris from the floor and surrounding work area. Dispose of all debris in a nearby trash can. 5. Initiate check-out procedures by having the cleaned mill and surrounding work area inspected by the pilot plant manager. 6. Once approved, secure the cover plate back onto the mill. Machine Care and Maintenance The mill must be properly cleaned and inspected for broken parts after each use. Report any broken parts directly to the pilot plant manager. All final inspections are performed by the pilot plant manager. Motors and moving parts should be properly lubricated on a regular basis by the pilot plant manager or a trained service technician. Accessories The mill comes equipped with eight interchangeable, stainless-steel, toothed grinding discs with varying applications. The grinding discs are located in a RED toolbox located on the mill s mounting cart (see Figure 3). For safety reasons, please contact the pilot plant manager when changing the grinding discs for your desired application. Figure 3 5

Mill, Laboratory STANDARD OPERATING PROCEDURE

Mill, Laboratory STANDARD OPERATING PROCEDURE STANDARD OPERATING PROCEDURE Mill, Laboratory Model: Model 4 Manufacturer: Thomas Scientific Location: Dry Processing Pilot Plant, 1851 Food Sciences Building Publication Date: 05/06/2014 Iowa State University

More information

Disc Mill, 12" Diameter STANDARD OPERATING PROCEDURE

Disc Mill, 12 Diameter STANDARD OPERATING PROCEDURE STANDARD OPERATING PROCEDURE Disc Mill, 12" Diameter Model: 12 D.M. Manufacturer: Andritz Sprout Bauer Location: Wet Processing Pilot Plant, 1091 Food Sciences Building Publication Date: 01/29/2014 Iowa

More information

Mill, Burr STANDARD OPERATING PROCEDURE

Mill, Burr STANDARD OPERATING PROCEDURE STANDARD OPERATING PROCEDURE Mill, Burr Model: DK-15LS Manufacturer: Mahlkonig Gmbh & Company KG/Mahlkonig USA Location: Dry Processing Pilot Plant, 1851 Food Sciences Building Publication Date: 04/30/2015

More information

2200-Lb. Semi-Electric Stacker OWNER S MANUAL

2200-Lb. Semi-Electric Stacker OWNER S MANUAL 2200-Lb. Semi-Electric Stacker OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

READ THIS MANUAL CAREFULLY BEFORE ASSEMBLY, TESTING & OPERATING

READ THIS MANUAL CAREFULLY BEFORE ASSEMBLY, TESTING & OPERATING The Operator must thoroughly read and understand this manual before operating the dust collector or commencing any servicing. Care should be taken to follow all safety rules and warning instructions. READ

More information

FW66 FORESTRY WINCH FW66. Owner s Manual 19/02/2016

FW66 FORESTRY WINCH FW66. Owner s Manual 19/02/2016 FW66 FORESTRY WINCH FW66 19/02/2016 Owner s Manual TABLE OF CONTENTS INTRODUCTION ---------------------------------------------------------------------------------- 2 INTENDED USE -----------------------------------------------------------------------------------

More information

Automatic Key Cutting Machine - CONDOR XC-007 CONDOR. Automatic Key Cutting Machine XC-007. User Manual V1.2

Automatic Key Cutting Machine - CONDOR XC-007 CONDOR. Automatic Key Cutting Machine XC-007. User Manual V1.2 1 CONDOR Automatic Key Cutting Machine XC-007 User Manual V1.2 2 Table of Contents 1) Safety Precautions and Warnings --------------------------------------------3 2) General Information -------------------------------------------------------4

More information

Providing research solutions for the food, feed and biorenewables industries.

Providing research solutions for the food, feed and biorenewables industries. Providing research solutions for the food, feed and biorenewables industries www.ccur.iastate.edu RESEARCH SOLUTIONS DESIGNED FOR YOUR NEEDS. WORLD-CLASS FACILITIES IN A UNIVERSITY SETTING For over 30

More information

Manual For Log Saw LS500. For Your Safety Read And Understand The Entire Manual Before Operating Machine. Save This Manual For Future Reference

Manual For Log Saw LS500. For Your Safety Read And Understand The Entire Manual Before Operating Machine. Save This Manual For Future Reference Manual For Log Saw LS500 For Your Safety Read And Understand The Entire Manual Before Operating Machine. Save This Manual For Future Reference 1. Proper use The firewood drag saw is designed for cross-cutting

More information

Business Plan Template

Business Plan Template Business Plan Template www.iowasbdc.org Place Company Logo Here Business Plan Owner s Names Name of Business Address Phone Number Email Address Website 2 Elements of the Business Plan Cover Page Table

More information

USER MANUAL TOOLGRINDER FME-TG-01

USER MANUAL TOOLGRINDER FME-TG-01 USER MANUAL TOOLGRINDER FME-TG-01 TABLE OF CONTENTS 1. GENERAL INFORMATION 3 1.1 Machinery Information 3 1.2 IIB-Marking 4 2. INTRODUCTION 5 2.1 Staff 5 2.2 Individual Means Of Protection 6 2.3 Workplace

More information

MACHINE GUARDING & OPERATOR SAFETY

MACHINE GUARDING & OPERATOR SAFETY MACHINE GUARDING & OPERATOR SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program and the

More information

24 Portable Saw Mill OWNER S MANUAL

24 Portable Saw Mill OWNER S MANUAL 24 Portable Saw Mill OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

20 Portable Saw Mill OWNER S MANUAL

20 Portable Saw Mill OWNER S MANUAL 20 Portable Saw Mill OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Horizontal Belt Stacker

Horizontal Belt Stacker Shipping & Mailing Inserter Horizontal Belt Stacker TM for Relay Systems Operator Guide International English Edition August 1, 2015 Note: This equipment has been tested and found to comply with the limits

More information

1000-LB. CAPACITY STEEL LOADING RAMPS (PAIR)

1000-LB. CAPACITY STEEL LOADING RAMPS (PAIR) 1000-LB. CAPACITY STEEL LOADING RAMPS (PAIR) OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

NEVER REMOVE THE SAFETY GUARDS

NEVER REMOVE THE SAFETY GUARDS Page 1 of 5 Name Recommended Use Designed for cutting stumps up to 200 mm above ground and 120 mm below ground. Maximum Stump diameter 300 mm. NOT suitable for stumps surrounded by rocks, stones, concrete

More information

ALUMINUM TRI-FOLD RAMP

ALUMINUM TRI-FOLD RAMP ALUMINUM TRI-FOLD RAMP OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Rocker Tool Post ASSEMBLY AND OPERATING INSTRUCTIONS

Rocker Tool Post ASSEMBLY AND OPERATING INSTRUCTIONS Rocker Tool Post 94540 ASSEMBLY AND OPERATING INSTRUCTIONS Machine tool shown in photo not included. Due to continuing improvements, actual product may differ slightly from the product described herein.

More information

USER S OPERATING AND INSTRUCTION MANUAL

USER S OPERATING AND INSTRUCTION MANUAL Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 738 MINI CHIP SLICER 0738S20000-CV INDEX Section Description Document No. Page No. SAFETY INSTRUCTIONS --------------------------------------

More information

Tomato Squeezer. Instruction Manual

Tomato Squeezer. Instruction Manual Tomato Squeezer Models 9008N (9107N), 9004N (9103N) and 9000N (9101N) Instruction Manual Version 1 3115 Pepper Mill Court, Mississauga, ON, L5L 4X5 4450 Witmer Industrial Estates, Unit 4, Niagara Falls,

More information

Rook Currency Counter

Rook Currency Counter Rook Currency Counter TM This manual contains important information on safety measures and operational features. Please read it carefully before operating your currency counter and keep it for future reference.

More information

S-5 Bulk Filler System

S-5 Bulk Filler System Logical Machines 1158 Roscoe Road Charlotte, Vermont 05445 802.425.2888 www.logicalmachines.com S-5 Bulk Filler System What is the Logical Machines S-5 The S-5 is used to fill containers with an operator

More information

7 PIECE TUBE FLARING KIT

7 PIECE TUBE FLARING KIT 7 PIECE TUBE FLARING KIT Model 5969 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

Laboratory Mill LM 120. The Most Rugged, Long-lived Sample Grinders Made

Laboratory Mill LM 120. The Most Rugged, Long-lived Sample Grinders Made Laboratory Mill LM 120 Grinding Wheat Rye Barley The Most Rugged, Long-lived Sample Grinders Made Ver 4.0 2013.03.11 Laboratory Mill 120 The Laboratory Mill 120 is designed for grinding samples of grains,

More information

HL STOKER AUGER PACKER

HL STOKER AUGER PACKER HL STOKER AUGER PACKER SAFETY INSTALLATION OPERATION MAINTENANCE 1 OF 26 FOREWARD This manual has been prepared to assist you with your Choice Bagging Equipment, Ltd. bag packaging equipment. The text

More information

SAFETY AND USER MANUAL FOR: WALL SAW PE 400.

SAFETY AND USER MANUAL FOR: WALL SAW PE 400. www.cardi.biz SAFETY AND USER MANUAL FOR: WALL SAW PE 400. USA - CANADA CARDI s.r.l. via Leonardo da Vinci, 21 I-24030 Pontida (BG), Italy tel. +39 035 795029 fax. +39 035 796190 info@cardi.biz www.cardi.biz

More information

CPT 60 Powerfloat. User & Safety Instructions

CPT 60 Powerfloat. User & Safety Instructions CPT 60 Powerfloat User & Safety Instructions This handbook contains operating and maintenance instructions for the Refina CPT60 Power float Please keep it in a safe place. You may need to refer to it at

More information

AirBench EX Operation and Maintenance

AirBench EX Operation and Maintenance AIRBENCH LTD AirBench EX Operation and Maintenance This Edition: 10 February 2016 AirBench Ltd, 14 Grange Farm Road, Colchester CO2 8JW www.airbench.com +44 (0) 1206 791191 Copyright AirBench Ltd 2016

More information

S-1600 Series Currency Counter Operating Manual. Models S-1600, S-1615 and S-1625 Including "V" Series

S-1600 Series Currency Counter Operating Manual. Models S-1600, S-1615 and S-1625 Including V Series S-1600 Series Currency Counter Operating Manual Models S-1600, S-1615 and S-1625 Including "V" Series CONTENTS Introduction 1 Front View Counter Diagram 2 Rear View Counter Diagram 3 Control Panel Overview

More information

CBE 730 AIR PACKER Safety - Installation - Operation - Maintenance

CBE 730 AIR PACKER Safety - Installation - Operation - Maintenance CBE 730 AIR PACKER Safety - Installation - Operation - Maintenance 1 OF 20 FOREWARD This manual has been prepared to assist you with your Choice Bagging Equipment, Ltd. bag packaging equipment. The text

More information

DBR-32HD REBAR STRAIGHTENER

DBR-32HD REBAR STRAIGHTENER OPERATING/SAFETY ORIGINAL INSTRUCTIONS DBR-32HD REBAR STRAIGHTENER TO REDUCE THE RISK OF INJURY, YOU MUST READ AND UNDERSTAND THIS INSTRUCTIONS I KK CO., LTD. 396-59, Ashitaka, Numazu-City, Shizuoka Pref.

More information

OPERATION MANUAL BOWL LIFTER

OPERATION MANUAL BOWL LIFTER OPERATION MANUAL BOWL LIFTER Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration Fact Sheet No.

More information

OPERATOR S MANUAL. LINKIT Series LKS300/LKS450 Portable Conveyor. InterQuip USA LLC interquip.net DISTRIBUTED BY: OPERATOR S MANUAL

OPERATOR S MANUAL. LINKIT Series LKS300/LKS450 Portable Conveyor. InterQuip USA LLC interquip.net DISTRIBUTED BY: OPERATOR S MANUAL OPERATOR S MANUAL LINKIT Series LKS300/LKS450 Portable Conveyor DISTRIBUTED BY: InterQuip USA LLC 203.322.2600 interquip.net 1 IMPORTANT Read, understand and obey these safety rules and operating instructions

More information

Instruction Manual HT 24 BM-D2400 Homogenizer

Instruction Manual HT 24 BM-D2400 Homogenizer Instruction Manual HT 24 BM-D2400 Homogenizer Foreword Thank you for purchasing a HT 24 Homogenizer. This manual contains instructions for the proper operation and care of this instrument. Please read

More information

78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL

78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL 78-RK VARIABLE SPEED HEAVY DUTY VIBRATOR OPERATING MANUAL IMPORTANT INSTRUCTIONS WARNING! FOR YOUR SAFETY PLEASE READ INSTRUCTIONS BEFORE OPERATING TOOL & WEAR EYE PROTECTION FD.08/2009 THANK YOU FOR PURCHASING

More information

POWER PINNER BENCH HAND WELDER 7250 OPERATOR S MANUAL

POWER PINNER BENCH HAND WELDER 7250 OPERATOR S MANUAL POWER PINNER BENCH HAND WELDER 7250 OPERATOR S MANUAL Copyright: November 20, 2018 Revised: Serial No. Gripnail Corporation An Employee Owned Company 97 Dexter Road East Providence, Rhode Island 02914-2045

More information

Wealtec Corp. E-Centrifuge Microcentrifuge Operation Manual. Version 3.0 Item # *This instrument is intended for laboratory use only

Wealtec Corp. E-Centrifuge Microcentrifuge Operation Manual. Version 3.0 Item # *This instrument is intended for laboratory use only Wealtec Corp. E-Centrifuge Microcentrifuge Operation Manual Version 3.0 Item # 03010-1 *This instrument is intended for laboratory use only http://www.wealtec.com E-mail: support@wealtec.com Packing List

More information

HEAVY DUTY WELDING CART

HEAVY DUTY WELDING CART HEAVY DUTY WELDING CART 43615 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2000 by Harbor Freight Tools.

More information

nual k Excella E-1 Open Air Shaker N) manual New Brunswick Excella E-1 Open Air Shaker Operating manual

nual k Excella E-1 Open Air Shaker N) manual New Brunswick Excella E-1 Open Air Shaker Operating manual nual k Excella E-1 Open Air Shaker N) manual New Brunswick Excella E-1 Open Air Shaker Operating manual Copyright 2014 Eppendorf AG, Germany. No part of this publication may be reproduced without the prior

More information

Magner /35-3 Series Currency Counter. Operator's Manual

Magner /35-3 Series Currency Counter. Operator's Manual Magner 35-2003/35-3 Series Currency Counter Operator's Manual Magner 35-2003 / 35-3 Series Introduction. The MAGNER 35-2003 / 35-3 is the most advanced Currency Counter available today. MAGNER's Design

More information

11, 000- L b. E x t r e m e - D u t y P a l l e t Tr u c k OWNER S MANUAL

11, 000- L b. E x t r e m e - D u t y P a l l e t Tr u c k OWNER S MANUAL 11, 000- L b. E x t r e m e - D u t y P a l l e t Tr u c k OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules

More information

A B FZP 6005-E

A B FZP 6005-E FZP 6005-E 3 4 2 3 8 A B FZP 6005-E 5 4 2 1 A 5 A B 8 6 6 7 22 FZP 6005-E 7 8 27 9 30 0 15 0 0 0 8 10 B 9 A 11 A FZP 6005-E 9 12 28 17 13 31 32 19 29 30 10 14 A B 34 15 16 37 32 38 0,6 mm 35 36 FZP 6005-E

More information

SAMPLE PREPARATION SPECTRAL 250/350. metkon.com

SAMPLE PREPARATION SPECTRAL 250/350. metkon.com SAMPLE PREPARATION SPECTRAL 250/350 metkon.com SPECTRAL 250/350 Sample preparation of metals and materials have become more and more important because of the rapid development and improvement of both

More information

7 2 i n. x 9 i n. Tr i - Fo l d R a m p s OWNER S MANUAL

7 2 i n. x 9 i n. Tr i - Fo l d R a m p s OWNER S MANUAL 7 2 i n. x 9 i n. Tr i - Fo l d R a m p s OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic

More information

Royal Sovereign RSL 2701 Laminator

Royal Sovereign RSL 2701 Laminator Royal Sovereign RSL 2701 Laminator Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com TABLE OF CONTENTS Introduction -----------------------------------------------------------------------------------

More information

SAMPLE PREPARATION SPECTRAL 250/350. metkon.com

SAMPLE PREPARATION SPECTRAL 250/350. metkon.com SAMPLE PREPARATION SPECTRAL 250/350 metkon.com SPECTRAL 250/350 Sample preparation of metals and materials have become more and more important because of the rapid development and improvement of both

More information

All of Alaska in Zone 7 except for the following Boroughs in Zone 8: Northwest Arctic. Yukon-Koyukuk. North Slope ADD INSULATION TO ATTIC

All of Alaska in Zone 7 except for the following Boroughs in Zone 8: Northwest Arctic. Yukon-Koyukuk. North Slope ADD INSULATION TO ATTIC DO-IT YOURSELF ATTIC INSTALLATION INSTRUCTIONS GREENFIBER CELLULOSE FIBER INSULATION HOW TO INSTALL 1 Calculate How Much GreenFiber Insulation You Need First, determine the R-value recommended for your

More information

Operator s Manual for Morse Kontrol-Karrier with Spark Resistant Parts and Air Power Tilt

Operator s Manual for Morse Kontrol-Karrier with Spark Resistant Parts and Air Power Tilt Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 2 Assembly Instructions..................

More information

SEB Autoclave Training

SEB Autoclave Training SEB Autoclave Training 1 Autoclave Details 3 Autoclaves located in SEB, one on each upper floor. Expensive pieces of equipment ($70,000 each). Essential for several groups research. Most malfunctions are

More information

2200-Lb. Stacker. Fixed Straddle Leg OWNER S MANUAL

2200-Lb. Stacker. Fixed Straddle Leg OWNER S MANUAL 2200-Lb. Stacker Fixed Straddle Leg OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

2200 lb. Semi-Electric Stacker

2200 lb. Semi-Electric Stacker 2200 lb. Semi-Electric Stacker Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

S-1100 Series Currency Counter Operating Manual. Models S-1100, S-1115 and S-1125

S-1100 Series Currency Counter Operating Manual. Models S-1100, S-1115 and S-1125 S-1100 Series Currency Counter Operating Manual Models S-1100, S-1115 and S-1125 Contents Section Page Introduction 1 Currency Counter Machine Diagrams 2 Control Panel Diagrams And Functions 4 Placing

More information

PORTABLE GARAGE CAR CANOPY

PORTABLE GARAGE CAR CANOPY PORTABLE GARAGE CAR CANOPY 40544 ASSEMBLY INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1999 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

OPERATION MANUAL. A220 Arc Welding Machine. Serial Number: Where Purchase: Date of purchased:

OPERATION MANUAL. A220 Arc Welding Machine. Serial Number: Where Purchase: Date of purchased: OPERATION MANUAL A220 Arc Welding Machine Serial Number: Where Purchase: Date of purchased: CONTENT 1.Safety... 2 2. Summary... 4 3. Electrical principle drawing... 5 4. Specifications... 6 5. Operation

More information

July P Wide Format Stacker User Guide

July P Wide Format Stacker User Guide July 2009 701P49768 Wide Format Stacker User Guide 2009 Xerox Corporation. All rights reserved. Xerox and the sphere of connectivity design are trademarks of Xerox Corporation in the United States and/or

More information

INTRODUCTION TO THE PROGRAM

INTRODUCTION TO THE PROGRAM INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order, so that employees will see the relationships between the various groups of information

More information

1.5HP CYCLONE DUST COLLECTOR MANUAL

1.5HP CYCLONE DUST COLLECTOR MANUAL 1.5HP CYCLONE DUST COLLECTOR MANUAL MANUAL FILTER CLEANING LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo

More information

15-AMP ELECTRIC WOOD CHIPPER + SHREDDER Model CJ602E

15-AMP ELECTRIC WOOD CHIPPER + SHREDDER Model CJ602E 15-AMP ELECTRIC WOOD CHIPPER + SHREDDER Model CJ602E Form No. SJ-CJ602E-880E-M A Division of Snow Joe, LLC OPERATOR S MANUAL IMPORTANT! Safety Instructions All Operators Must Read These Instructions Before

More information

General Safety. Safety Instructions All Operators Must Read These Instructions Before Use. General Safety WARNINGS! SAVE THESE INSTRUCTIONS

General Safety. Safety Instructions All Operators Must Read These Instructions Before Use. General Safety WARNINGS! SAVE THESE INSTRUCTIONS OPERATOR S MANUAL R ELECTRIC WOOD CHIPPER + SHREDDER 15-AMP 17:1 REDUCTION RATIO A Division of Snow Joe, LLC Model CJ602E Form No. SJ-CJ602E-880E-MR1 IMPORTANT! Safety Instructions All Operators Must Read

More information

Bucket Elevator Cement Bucket Elevator

Bucket Elevator Cement Bucket Elevator 289 YELLOW RIVER ROAD, Cement bucket conveyor Cement bucket conveyor is composed of upper section with drive sprocket, driving device, middle case and bottom section with tension sprocket and non-return

More information

Operation Manual. 120V Lithium Ion Cordless Chainsaw MODEL #

Operation Manual. 120V Lithium Ion Cordless Chainsaw MODEL # 120V Lithium Ion Cordless Chainsaw MODEL # 106493 Operation Manual This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may

More information

Job ID: CAAA09 DOP LOCOMOTIVE ENGINEER CONDUCTOR

Job ID: CAAA09 DOP LOCOMOTIVE ENGINEER CONDUCTOR Job ID: CAAA09 DOP LOCOMOTIVE ENGINEER CONDUCTOR Crane Army Ammunition Activity Depot Operations Division Job Posting Information Job Title: Program Type: Number of Positions Available: Targeted Programs

More information

H07 H09. BENCH FUME HOOD with Combination Sash. Fume Hoods. Installation Instructions. 48"- 60"- 72"- 96" long

H07 H09. BENCH FUME HOOD with Combination Sash. Fume Hoods. Installation Instructions. 48- 60- 72- 96 long Installation Instructions Supreme Air BENCH FUME HOOD with Combination Sash H07 H09 S T Y L E Fume Hoods 48"- 60"- 72"- 96" long Publication No. IIH07-SA 07/06 Part Number: IMAN-H07 FUME HOOD END PANEL

More information

DR CHIPPER ATTACHMENT for the DR FIELD and BRUSH MOWER SAFETY & OPERATING INSTRUCTIONS. Serial No. Order No.

DR CHIPPER ATTACHMENT for the DR FIELD and BRUSH MOWER SAFETY & OPERATING INSTRUCTIONS. Serial No. Order No. DR CHIPPER ATTACHMENT for the DR FIELD and BRUSH MOWER SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Web site: www.drpower.com

More information

DR CHIPPER ATTACHMENT SAFETY & OPERATING INSTRUCTIONS. Serial No. Order No.

DR CHIPPER ATTACHMENT SAFETY & OPERATING INSTRUCTIONS. Serial No. Order No. DR CHIPPER ATTACHMENT SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Web site: www.drpower.com Read and understand

More information

S-1000 Mini Series Currency Counter Operating Manual. Models S-1000, S-1015 and S-1025

S-1000 Mini Series Currency Counter Operating Manual. Models S-1000, S-1015 and S-1025 S-1000 Mini Series Currency Counter Operating Manual Models S-1000, S-1015 and S-1025 Contents Section Page Introduction 1 Currency Counter Machine Diagrams 2 Control Panel Diagrams And Functions 4 Placing

More information

Automatic Key Cutting MachineCONDOR XC-MINI CONDOR. Automatic Key Cutting Machine XC-MINI. User Manual

Automatic Key Cutting MachineCONDOR XC-MINI CONDOR. Automatic Key Cutting Machine XC-MINI. User Manual CONDOR Automatic Key Cutting Machine XC-MINI User Manual TABLE OF CONTENTS 1)SAFETY PRECAUTIONS AND WARNINGS ------------------------------------------02 2)GENERAL INFORMATION --------------------------------------------------------03

More information

Continuous Ore Roaster Setup & Operating Instructions

Continuous Ore Roaster Setup & Operating Instructions Continuous Ore Roaster Setup & Operating Instructions 0. Unwrap the roaster pallet. (The cross bar has been unattached for shipping purposes. You will need one 120V outlet and one 220 outlet or two 220V,

More information

Blender. Instruction Manual

Blender. Instruction Manual Blender Model BL-020B Instruction Manual Version 1 3115 Pepper Mill Court, Mississauga, ON, L5L 4X5 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY, 14305 1-800-465-0234 www.omcan.com Table of

More information

Electric Lawn Edger. Operator s Manual. 12 Amp WARRANTY SAFETY ASSEMBLY OPERATION MAINTENANCE PARTS LIST. Model No

Electric Lawn Edger. Operator s Manual. 12 Amp WARRANTY SAFETY ASSEMBLY OPERATION MAINTENANCE PARTS LIST. Model No Operator s Manual Amp Electric Lawn Edger Model No. 7.7983 CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this Manual before using this product. Sears Brands Management

More information

8 DIAL CALIPER. Model Diagrams within this manual may not be drawn proportionally.

8 DIAL CALIPER. Model Diagrams within this manual may not be drawn proportionally. 8 DIAL CALIPER Model 97389 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product

More information

Cement Bucket. Bucket Elevator

Cement Bucket. Bucket Elevator Bucket Elevator Cement Bucket 289 YELLOW RIVER ROAD, XINXIANG CITY, HENAN PROVINCE Tel: +86-373-5799198 Fax: +86-373-5071699 www.pkmachinery.com info@pkmachinery.com 289 YELLOW RIVER ROAD, XINXIANG CITY,

More information

BakeMax Dough Mini Moulder BMMDM02

BakeMax Dough Mini Moulder BMMDM02 BakeMax Dough Mini Moulder BMMDM02 2 Instruction Manual 1. Preface ------------------------------------------- P2 2. Machine Introduction -------------------------------- P2 3. Machine Specification and

More information

&56, 6RXWK :HVW &KDSWHU 0HHWLQJV

&56, 6RXWK :HVW &KDSWHU 0HHWLQJV 1 Branch Name Fabrication Table Bending Operator 3 Jan 2017 Table Bending JSA 1) Feed bars into bender Pinch Point Fingers & Hands 3 3 9 ADMIN: SOP & Training for proper hand placement 2 3 6 Ensure training

More information

Aluminum Bi-Fold Arched Ramps

Aluminum Bi-Fold Arched Ramps Aluminum Bi-Fold Arched Ramps 3000-Lb. Capacity Per Pair Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules

More information

READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING THIS 3-POINT HITCH DR RAPID FEED CHIPPER.

READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING THIS 3-POINT HITCH DR RAPID FEED CHIPPER. 3-POINT HITCH DR RAPID-FEED CHIPPER SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING THIS 3-POINT HITCH DR RAPID FEED

More information

booster EX2 / EX3 Operating Manual Extrusion Welder Weldy AG Galileo-Strasse 10 CH-6056 Kaegiswil / Switzerland TECHSPANGROUP

booster EX2 / EX3 Operating Manual Extrusion Welder Weldy AG Galileo-Strasse 10 CH-6056 Kaegiswil / Switzerland TECHSPANGROUP booster EX2 / EX3 Extrusion Welder Operating Manual Weldy AG Galileo-Strasse 10 CH-6056 Kaegiswil / Switzerland TECHSPANGROUP Australia: Tel. 1-800 148 791 Fax. 1-800 148 799 www.weldy.com.au New Zealand:

More information

OPERATION MANUAL 1.5HP Dust Cyclone

OPERATION MANUAL 1.5HP Dust Cyclone OPERATION MANUAL 1.5HP Dust Cyclone MODEL NO.: CDC-1090P The Operator must thoroughly Read and understand this Manual before operating the Dust collector or commencing Any servicing. Care should be Taken

More information

Machine Guarding and Maintenance

Machine Guarding and Maintenance 1. Identification of Workplace Hazard Machine Guarding and Maintenance The exposed moving parts of machinery can cause serious injuries to an employee who is inadvertently caught by the machine. Hazardous

More information

Moving money forward UV MG

Moving money forward UV MG Moving money forward T This manual contains important information on safety measures and operational features, please read it carefully before operating your currency counter and keep it for future reference.

More information

Safety Guide. Housekeeping BEST. Practices AND. Checklist

Safety Guide. Housekeeping BEST. Practices AND. Checklist Safety Guide BEST Practices AND Checklist Safety Best Practices 1. Keep all marked aisles, passageways, areas around entry doors and stairways clear of tools, supplies, boxes, cords, cables, and air hoses

More information

Training Guide Electric Arc Welding (non code).

Training Guide Electric Arc Welding (non code). Training Guide Electric Arc Welding (non code). Training Guide Objectives: After completing the training the student will be able to; Set up and inspect the Electric are welding power source for electric

More information

Cargo Carrier with Ramp 50In.L x 30 1/4In.W.

Cargo Carrier with Ramp 50In.L x 30 1/4In.W. Cargo Carrier with Ramp 50In.L x 30 1/4In.W. Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

Vegetable Cutter. Instruction Manual

Vegetable Cutter. Instruction Manual Vegetable Cutter Model HLC300 Instruction Manual Version 1 3115 Pepper Mill Court, Mississauga, ON, L5L 4X5 4450 Witmer Industrial Estates, Unit 4, Niagara Falls, NY, 14305 1-800-465-0234 www.omcan.com

More information

Heavy-Duty Aluminum Arched Ramps 10,000-Lb. Capacity Per Pair.

Heavy-Duty Aluminum Arched Ramps 10,000-Lb. Capacity Per Pair. Heavy-Duty Aluminum Arched Ramps 10,000-Lb. Capacity Per Pair. Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety

More information

!!Prompt attention to any injury usually will minimize what may become serious if neglected!!

!!Prompt attention to any injury usually will minimize what may become serious if neglected!! Safety in Welding !!Always report an accident regardless of how slight it may be!! Even a little scratch might lead to an infection, or a minute particle could result in a serious eye injury!!!!prompt

More information

PURPOSE OF THE PROCEDURE To minimize the incidence of employee injuries from machines and equipment as per OSHA

PURPOSE OF THE PROCEDURE To minimize the incidence of employee injuries from machines and equipment as per OSHA Title: Machine Guarding Procedure Effective Date: November 2005 Revision Date: January 13, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction Management Director Environmental

More information

SYSTEM 600 GENERAL MAINTENANCE AND ADJUSTMENT GUIDE

SYSTEM 600 GENERAL MAINTENANCE AND ADJUSTMENT GUIDE SYSTEM 600 GENERAL MAINTENANCE AND ADJUSTMENT GUIDE If you follow a routine maintenance schedule your system 600 will give you years of reliable service with a minimum of down time. This guide outlines

More information

USER S OPERATING AND INSTRUCTION MANUAL

USER S OPERATING AND INSTRUCTION MANUAL Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 619-MDP DOUGH PRESS 0619S20000-CV3 619-MDP DOUGH PRESS INDEX Section Description Document No. Page No. SAFETY INSTRUCTIONS

More information

58V MAX LITHIUM ION CORDLESS CHAINSAW

58V MAX LITHIUM ION CORDLESS CHAINSAW 58V MAX LITHIUM ION CORDLESS CHAINSAW Operator s manual Model: CSX5-M For customer support, please call 1-800-261-3981 or send email to: support@senixtools.com SAVE THIS MANUAL FOR FUTURE REFERENCE. TECHNICAL

More information

H50. DYNAMIC BARRIER Bench Fume Hood. Fume Hoods. Installation Instructions. 48"- 60"- 72"- 96" long

H50. DYNAMIC BARRIER Bench Fume Hood. Fume Hoods. Installation Instructions. 48- 60- 72- 96 long Installation Instructions Supreme Air DYNAMIC BARRIER Bench Fume Hood H50 S T Y L E Fume Hoods 48"- 60"- 72"- 96" long Publication No. IIH50-SA 06/01 Part Number: IMAN-H50 Kewaunee Scientific Corporation

More information

Proweld Equipment Owner & Maintenance Manual FIELD 12 TRENCH (Widos 4900)

Proweld Equipment Owner & Maintenance Manual FIELD 12 TRENCH (Widos 4900) Proweld Equipment Owner & Maintenance Manual FIELD 12 TRENCH (Widos 4900) 35 Green Street, PO Box 653, Malden, MA 02148 Tel: (781) 321-5409 - Fax (781) 321-4421 - Toll Free: (800) 343-3618 www.asahi-america.com

More information

ELECTRIC SILENT WOOD CHIPPER + SHREDDER 15-AMP 1.7-INCH 21:1 REDUCTION RATIO

ELECTRIC SILENT WOOD CHIPPER + SHREDDER 15-AMP 1.7-INCH 21:1 REDUCTION RATIO OPERATOR S MANUAL R ELECTRIC SILENT WOOD CHIPPER + SHREDDER 15-AMP 1.7-INCH 21:1 REDUCTION RATIO A Division of Snow Joe, LLC Model CJ603E Form No. SJ-CJ603E-880E-M IMPORTANT! Safety Instructions All Operators

More information

Operate Manual. DA-1600i Stud Welding Machine. DA-2000i Stud Welding Machine. DA-2500i Stud Welding Machine

Operate Manual. DA-1600i Stud Welding Machine. DA-2000i Stud Welding Machine. DA-2500i Stud Welding Machine DA-1600i Stud Welding Machine DA-2000i Stud Welding Machine DA-2500i Stud Welding Machine Operate Manual KENT STUD WELDING CO., LTD 1 Content 1. Preface------------------------------------------------------------------------------

More information

Machinery Mover. Owner s Manual

Machinery Mover. Owner s Manual Machinery Mover Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

self level laser Model Set up And Operating Instructions

self level laser Model Set up And Operating Instructions self level laser with multi-beams Model 96959 Set up And Operating Instructions This Self Level Laser may be used with a Tripod (not included). Diagrams within this manual may not be drawn proportionally.

More information

LOAD RAMP 1000 LB. CAPACITY

LOAD RAMP 1000 LB. CAPACITY LOAD RAMP 1000 LB. CAPACITY 55424 ASSEMBLY AND OPERATING INSTRUCTIONS Safely roll Dirt Bikes and more into your Pickup! 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com

More information

MODEL INSTALLATION INSTRUCTIONS

MODEL INSTALLATION INSTRUCTIONS WWW.BURCAM.COM 2190 Boul. Dagenais West TEL: 514.337.4415 LAVAL (QUEBEC) FAX: 514.337.4029 CANADA H7L 5X9 info@burcam.com Your pump has been carefully packaged at the factory to prevent damage during shipping.

More information