SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking

Transcription

1 SAFETY DATA SHEET Section 1: Identification of the substance/mixture and of the company/undertaking Product identifier Trade name or designation of the mixture Registration number Synonyms Product Code Date of first issue Version number 03 Revision date Supersedes date NYOGEL 774HMS None. NYOGEL 774HMS April Relevant identified uses of the substance or mixture and uses advised against Identified uses Uses advised against None known. Details of the supplier of the safety data sheet aventure Group AB PO Box 211 SE Lindome Sverige Section 2: Hazards identification Classification of the substance or mixture The mixture has been assessed and/or tested for its physical, health and environmental hazards and the following classification applies. Classification according to Directive 67/548/EEC or 1999/45/EC as amended This preparation does not meet the criteria for classification according to Directive 1999/45/EC as amended. Classification according to Regulation (EC) No 1272/2008 as amended This mixture does not meet the criteria for classification according to Regulation (EC) 1272/2008 as amended. Hazard summary Physical hazards Health hazards Environmental hazards Specific hazards Main symptoms Label elements Not classified for physical hazards. Not classified for health hazards. However, occupational exposure to the mixture or substance(s) may cause adverse health effects. Not classified for hazards to the environment. Label according to Regulation (EC) No. 1272/2008 as amended Contains: MOLYBDENUM DISULFIDE Hazard statements Precautionary statements Prevention Response Storage Disposal Supplemental label information Other hazards The substance does not meet the criteria for classification. Not applicable. Not assigned. Section 3: Composition/information on ingredients Mixture NYOGEL 774HMS Version #: 03 Revision date: Print date: 1 / 5

2 General information Chemical name % CASNo. / EC No. REACH Registration No. Index No. Notes MOLYBDENUM DISULFIDE Classification: DSD: 5 < # CLP: Other components below reportable levels CLP: Regulation No. 1272/2008. DSD: Directive 67/548/EEC. #: This substance has workplace exposure limit(s). PBT: persistent, bioaccumulative and toxic substance. vpvb: very persistent and very bioaccumulative substance. Section 4: First aid measures Description of first aid measures Inhalation Skin contact Eye contact Ingestion Most important symptoms and effects, both acute and delayed Indication of any immediate medical attention and special treatment needed Move to fresh air. Call a physician if symptoms develop or persist. Get medical attention if irritation develops and persists. Rinse skin with water/shower. Rinse with water. Get medical attention if irritation develops and persists. Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately. Section 5: Firefighting measures General fire hazards Extinguishing media Suitable extinguishing media Unsuitable extinguishing media Special hazards arising from the substance or mixture Advice for firefighters Special protective equipment for firefighters Special firefighting procedures Water Fog. Water. Do not use water jet as an extinguisher, as this will spread the fire. Wear suitable protective equipment. Section 6: Accidental release measures Personal precautions, protective equipment and emergency procedures For nonemergency personnel For emergency responders Environmental precautions Methods and material for containment and cleaning up No special environmental precautions required. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Reference to other sections Never return spills in original containers for reuse. For waste disposal, see section 13 of the MSDS. Section 7: Handling and storage Precautions for safe handling Use care in handling/storage. NYOGEL 774HMS Version #: 03 Revision date: Print date: 2 / 5

3 Conditions for safe storage, including any incompatibilities Specific end use(s) Store in original tightly closed container. Use care in handling/storage. Store in accordance with local/regional/national/international regulation. Section 8: Exposure controls/personal protection Control parameters Occupational exposure limits Denmark. Exposure Limit Values Components MOLYBDENUM DISULFIDE ( ) Biological limit values Recommended monitoring procedures DNEL PNEC Exposure controls Appropriate engineering controls Type TLV Value No biological exposure limits noted for the ingredient(s). Follow standard monitoring procedures. Provide adequate general and local exhaust ventilation. Individual protection measures, such as personal protective equipment General information Eye/face protection Skin protection Not normally needed. Hand protection Not normally needed. 10,0000 mg/m3 Other Personal protection equipment should be chosen according to the CEN standards and in discussion with the supplier of the personal protective equipment. Respiratory protection Thermal hazards Hygiene measures Environmental exposure controls No personal respiratory protective equipment normally required. Handle in accordance with good industrial hygiene and safety practice. Section 9: Physical and chemical properties Information on basic physical and chemical properties Physical state Odor Form Color Flash point Liquid. Liquid. Black > 392 F (> 200 C) Pour point 4 F (20 C) ASTM D97 Kinematic viscosity 7400 cst ASTM D445 Kinematic viscosity temp Other data Shelf life Other information 104 F (40 C) 4 years Section 10: Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products No relevant additional information available. None known. Material is stable under normal conditions. Avoid temperatures exceeding the flash point. No dangerous reaction known under conditions of normal use. NYOGEL 774HMS Version #: 03 Revision date: Print date: 3 / 5

4 Section 11: Toxicological information General information Information on likely routes of exposure Ingestion Inhalation Skin contact Eye contact Symptoms Information on toxicological effects Acute toxicity Components MOLYBDENUM DISULFIDE ( ) Test Results * Estimates for product may be based on additional component data not shown. Skin corrosion/irritation Serious eye damage/eye irritation Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity single exposure Specific target organ toxicity repeated exposure Aspiration hazard Mixture versus substance information Other information Knowledge about sensitization hazard is incomplete. Knowledge about sensitization hazard is incomplete. Knowledge about mutagenicity is incomplete. Knowledge about carcinogenicity is incomplete. Section 12: Ecological information Toxicity Persistence and degradability Bioaccumulative potential Mobility Environmental fate Partition coefficient Mobility in soil Results of PBT and vpvb assessment Other adverse effects Acute Inhalation LC50 Rat: 2820 mg/l/4h This product has no known adverse effect on human health. No toxicity data noted for the ingredient(s). No data is available on the degradability of this product. Section 13: Disposal considerations Waste treatment methods Residual waste Contaminated packaging EU waste code Disposal methods/information Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Empty containers should be taken to an approved waste handling site for recycling or disposal. Section 14: Transport information ADR Collect and reclaim or dispose in sealed containers at licensed waste disposal site. NYOGEL 774HMS Version #: 03 Revision date: Print date: 4 / 5

5 RID ADN IATA IMDG Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Section 15: Regulatory information No information available. Safety, health and environmental regulations/legislation specific for the substance or mixture EU regulations Directive 96/61/EC concerning integrated pollution prevention and control (IPPC): Article 15, European Pollution Emission Registery (EPER) Regulation (EC) No. 1907/2006, Article 59(1). Candidate List Regulation (EC) No. 2037/2000 on substances that deplete the ozone layer, Annex I Regulation (EC) No. 2037/2000 on substances that deplete the ozone layer, Annex II Regulation (EC) No. 689/2008 concerning the export and import of dangerous chemicals, Annex I, part 1 Regulation (EC) No. 689/2008 concerning the export and import of dangerous chemicals, Annex I, part 2 Regulation (EC) No. 689/2008 concerning the export and import of dangerous chemicals, Annex I, part 3 Regulation (EC) No. 689/2008 concerning the export and import of dangerous chemicals, Annex V Regulation (EC) No. 850/2004 On persistent organic pollutants, Annex I Other regulations National regulations Chemical safety assessment Section 16: Other information List of abbreviations References Information on evaluation method leading to the classification of mixture Full text of any statements or Rphrases and Hphrases under Sections 2 to 15 Revision information Training information Issued by Disclaimer Issue date Revision date Print date The product is classified and labelled in accordance with EC directives or respective national laws. This Safety Data Sheet complies with the requirements of Regulation (EC) No 1907/2006. No Chemical Safety Assessment has been carried out. None. Kevin O'Halloran The information in the sheet was written based on the best knowledge and experience currently available. NYOGEL 774HMS Version #: 03 Revision date: Print date: 5 / 5