: Iodine, 0.1N (0.05M)
|
|
- Christiana Fields
- 6 years ago
- Views:
Transcription
1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/16/2013 Revision date: 08/17/2017 Supersedes: 09/23/2015 Version: 1.2 : Mixtures : : LC Recommended use and restrictions on use Use of the substance/mixture 1.3. Supplier : For laboratory and manufacturing use only. LabChem Inc Jackson's Pointe Commerce Park Building 1000, 1010 Jackson's Pointe Court Zelienople, PA USA T F info@labchem.com Emergency telephone number Emergency number : CHEMTREC: or SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Skin corrosion/irritation H315 Category 2 Serious eye damage/eye H319 irritation Category 2A Skin sensitization, Category H317 1 Hazardous to the aquatic H402 environment - Acute Hazard Category 3 Full text of H statements : see section 16 Causes skin irritation Causes serious eye irritation May cause an allergic skin reaction Harmful to aquatic life 2.2. GHS Label elements, including precautionary statements GHS-US labeling Hazard pictograms (GHS-US) : Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) GHS Other hazards which do not result in classification Other hazards not contributing to the : None. : Warning : H315 - Causes skin irritation H317 - May cause an allergic skin reaction H319 - Causes serious eye irritation H402 - Harmful to aquatic life : P261 - Avoid breathing mist, vapors, spray P264 - Wash exposed skin thoroughly after handling Contaminated work clothing must not be allowed out of the workplace P273 - Avoid release to the environment P280 - Wear protective gloves, eye protection P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P333+P313 - If skin irritation or rash occurs: Get medical advice/attention P337+P313 - If eye irritation persists: Get medical advice/attention P363 - Wash contaminated clothing before reuse P501 - Dispose of contents/container to comply with local, state and federal regulations P302+P352 - IF ON SKIN: Wash with plenty of soap and water 08/21/2017 EN (English US) Page 1
2 classification 2.4. Unknown acute toxicity (GHS US) SECTION 3: Composition/Information on ingredients 3.1. Substances 3.2. Mixtures Name Product identifier % GHS-US classification Water (CAS-No.) Not classified Potassium Iodide (CAS-No.) Aquatic Acute 2, H401 Iodine (CAS-No.) Acute Tox. 3 (Dermal), H311 Acute Tox. 4 (Inhalation), H332 Skin Corr. 1C, H314 Eye Dam. 1, H318 Skin Sens. 1B, H317 Aquatic Acute 1, H400 Hydrochloric Acid, 37% w/w (CAS-No.) Acute Tox. 4 (Oral), H302 Skin Corr. 1B, H314 Eye Dam. 1, H318 STOT SE 3, H335 Aquatic Acute 3, H402 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation or rash occurs: Get medical advice/attention. : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects (acute and delayed) Symptoms/effects after inhalation : May cause an allergic skin reaction. Symptoms/effects after skin contact : Causes skin irritation. Symptoms/effects after eye contact : Causes serious eye irritation Immediate medical attention and special treatment, if necessary Obtain medical assistance. SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. Unsuitable extinguishing media : Do not use a heavy water stream Specific hazards arising from the chemical Fire hazard : Not flammable. Explosion hazard : Special protective equipment and precautions for fire-fighters Firefighting instructions : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. Protection during firefighting : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Protective equipment Emergency procedures : Safety glasses. Gloves. : Evacuate unnecessary personnel. 08/21/2017 EN (English US) 2/8
3 For emergency responders Protective equipment Emergency procedures : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. Avoid breathing mist, vapors, spray. : Do not eat, drink or smoke when using this product. Wash contaminated clothing before reuse. Wash exposed skin thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Keep only in the original container in a cool, well ventilated place away from : Direct sunlight. Keep container closed when not in use. : Strong reducing agents. Ammonia. Acetaldehyde. metals. Strong bases. : Sources of ignition. Direct sunlight. ACGIH ACGIH TWA (mg/m³) 0.1 mg/m³ Inhalable fraction ACGIH ACGIH TWA (ppm) 0.01 ppm Inhalable fraction ACGIH ACGIH STEL (mg/m³) 1 mg/m³ ACGIH ACGIH STEL (ppm) 0.1 ppm OSHA OSHA PEL (Ceiling) (mg/m³) 1 mg/m³ OSHA OSHA PEL (Ceiling) (ppm) 0.1 ppm IDLH US IDLH (ppm) 2 ppm NIOSH NIOSH REL (ceiling) (mg/m³) 1 mg/m³ NIOSH NIOSH REL (ceiling) (ppm) 0.1 ppm ACGIH ACGIH TWA (ppm) 0.01 ppm Inhalable fraction Water ( ) ACGIH ACGIH Ceiling (mg/m³) 2.98 mg/m³ ACGIH ACGIH Ceiling (ppm) 2 ppm OSHA OSHA PEL (Ceiling) (mg/m³) 7 mg/m³ OSHA OSHA PEL (Ceiling) (ppm) 5 ppm IDLH US IDLH (ppm) 50 ppm NIOSH NIOSH REL (ceiling) (mg/m³) 7 mg/m³ NIOSH NIOSH REL (ceiling) (ppm) 5 ppm 08/21/2017 EN (English US) 3/8
4 8.2. Appropriate engineering controls Appropriate engineering controls : Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Provide adequate general and local exhaust ventilation Individual protection measures/personal protective equipment Hand protection: Wear protective gloves Eye protection: Chemical goggles or safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: Wear appropriate mask Other information: Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Color : amber Odor : characteristic Odor threshold ph Melting point Freezing point Boiling point Flash point Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) : Non flammable. Vapor pressure Relative vapor density at 20 C Relative density Solubility : Miscible with water. Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosion limits Explosive properties :. Oxidizing properties Other information No additional information available SECTION 10: Stability and reactivity Reactivity No additional information available Chemical stability Stable under normal conditions. 08/21/2017 EN (English US) 4/8
5 10.3. Possibility of hazardous reactions Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials metals. Strong reducing agents. Ammonia. Strong bases Hazardous decomposition products Iodine vapor. Potassium oxide. Hydrogen chloride. SECTION 11: Toxicological information Information on toxicological effects Likely routes of exposure Acute toxicity LD50 oral rat ATE US (oral) LD50 oral rat ATE US (oral) ATE US (dermal) ATE US (dust, mist) Water ( ) LD50 oral rat ATE US (oral) LD50 oral rat LD50 dermal rabbit ATE US (oral) ATE US (dermal) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity : Skin and eye contact; Inhalation mg/kg mg/kg body weight mg/kg mg/kg body weight 220 mg/kg body weight 1.5 mg/l/4h mg/kg mg/kg body weight 700 mg/kg 5010 mg/kg 700 mg/kg body weight 5010 mg/kg body weight : Causes skin irritation. : Causes serious eye irritation. : May cause an allergic skin reaction. IARC group Reproductive toxicity Specific target organ toxicity single exposure 3 - Not classifiable Specific target organ toxicity repeated exposure Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/effects after inhalation Symptoms/effects after skin contact Symptoms/effects after eye contact : Based on available data, the classification criteria are not met. : May cause an allergic skin reaction. : Causes skin irritation. : Causes serious eye irritation. 08/21/2017 EN (English US) 5/8
6 SECTION 12: Ecological information Toxicity Ecology - water EC50 Daphnia 1 LC50 fish 1 EC50 Daphnia 1 LC50 fish 1 EC50 Daphnia 1 : Harmful to aquatic life mg/l 1.7 mg/l 0.2 mg/l 3200 mg/l 120 h 2.7 mg/l 24 h LC50 fish mg/l (LC50; 96 h) EC50 Daphnia 1 < 56 mg/l (EC50; 72 h) Water ( ) Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD Biodegradability: not applicable. No test data on mobility of the components available Bioaccumulative potential Bioaccumulative potential Log Pow 2.49 Bioaccumulative potential Bioaccumulative potential Water ( ) Bioaccumulative potential Log Pow 0.25 (QSAR) Bioaccumulative potential Low potential for bioaccumulation (Log Kow < 4) Mobility in soil Ecology - soil May be harmful to plant growth, blooming and fruit formation Other adverse effects Effect on the global warming GWPmix comment : No known effects from this product. : No known effects from this product. 08/21/2017 EN (English US) 6/8
7 Other information : Avoid release to the environment. SECTION 13: Disposal considerations Disposal methods Waste disposal recommendations Ecology - waste materials SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated : Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to comply with local, state and federal regulations. : Avoid release to the environment. SECTION 15: Regulatory information US Federal regulations All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Toxic Substances Control Act (TSCA) inventory Chemical(s) subject to the reporting requirements of Section 313 or Title III of the Superfund Amendments and Reauthorization Act (SARA) of 1986 and 40 CFR Part 372. Hydrochloric Acid, 37% w/w CAS-No % SARA Section 311/312 Hazard Classes SARA Section 311/312 Hazard Classes EPA TSCA Regulatory Flag RQ (Reportable quantity, section 304 of EPA's List of Lists) SARA Section 302 Threshold Planning Quantity (TPQ) SARA Section 311/312 Hazard Classes Immediate (acute) health hazard Delayed (chronic) health hazard Immediate (acute) health hazard Delayed (chronic) health hazard T - T - indicates a substance that is the subject of a Section 4 test rule under TSCA lb 500 lb Immediate (acute) health hazard International regulations CANADA Listed on the Canadian DSL (Domestic Substances List) Listed on the Canadian DSL (Domestic Substances List) EU-Regulations No additional information available National regulations Listed on the Canadian IDL (Ingredient Disclosure List) Listed on the Canadian IDL (Ingredient Disclosure List) US State regulations California Proposition 65 - This product does not contain any substances known to the state of California to cause cancer, developmental and/or reproductive harm 08/21/2017 EN (English US) 7/8
8 SECTION 16: Other information Revision date : 08/17/2017 Other information : None. Full text of H-phrases: see section 16: H302 H311 H314 H315 H317 H318 H319 H332 H335 H400 H401 H402 NFPA health hazard NFPA fire hazard NFPA reactivity Harmful if swallowed Toxic in contact with skin Causes severe skin burns and eye damage Causes skin irritation May cause an allergic skin reaction Causes serious eye damage Causes serious eye irritation Harmful if inhaled May cause respiratory irritation Very toxic to aquatic life Toxic to aquatic life Harmful to aquatic life : 1 - Materials that, under emergency conditions, can cause significant irritation. : 0 - Materials that will not burn under typical dire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. : 0 - Material that in themselves are normally stable, even under fire conditions. Hazard Rating Health Flammability Physical Personal protection : 1 Slight Hazard - Irritation or minor reversible injury possible : 0 Minimal Hazard - Materials that will not burn : 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives. : B B - Safety glasses, Gloves SDS US LabChem Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 08/21/2017 EN (English US) 8/8
: Potassium Iodide-Iodine Reagent
Date of issue: 01/28/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide-Iodine
More information: Potassium Iodide, 10% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
More information: Potassium Iodide, 2% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
More information: Lactic Acid, 10% v/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/19/2015 Revision date: 11/07/2017 Supersedes: 02/05/2016 Version: 1.3 : Mixtures : : LC16000 1.2.
More information: Potassium Chloride, 4M, Saturated with Silver Chloride
Potassium Chloride, 4M, Saturated with Silver Chloride Date of issue: 11/29/1998 Revision date: 01/31/2018 Supersedes: 06/27/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form
More information: Safranin, 1% Aqueous
Date of issue: 04/24/2015 Revision date: 02/20/2018 Supersedes: 02/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Safranin, 1% Aqueous
More information: Sodium Bicarbonate-Sodium Chloride Solution
Date of issue: 01/22/2014 Revision date: 03/13/2018 Supersedes: 03/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Bicarbonate-Sodium
More information: Potassium Oxalate, 2% w/v
Date of issue: 11/21/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Oxalate,
More information: Iodine, 0.01N (0.005M)
Date of issue: 12/13/2013 Revision date: 11/01/2017 Supersedes: 12/13/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Iodine, 0.01N (0.005M)
More information: Iodine, 0.025N (0.0125M)
Date of issue: 12/16/2013 Revision date: 11/01/2017 Supersedes: 11/01/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Iodine, 0.025N
More information: Sodium Carbonate, 1.0N (0.5M)
Date of issue: 01/22/2014 Revision date: 03/20/2018 Supersedes: 03/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Carbonate,
More information: Sodium Sulfite, 5% w/v
Date of issue: 05/06/2015 Revision date: 04/11/2018 Supersedes: 05/06/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC24940 1.2.
More information: Sodium Carbonate, 5% w/v
Date of issue: 01/22/2014 Revision date: 03/20/2018 Supersedes: 03/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Carbonate,
More information: Potassium AA Standard, 100 ppm
Date of issue: 07/28/2014 Revision date: 01/30/2018 Supersedes: 07/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium AA Standard,
More information: Potassium AA Standard, 1000 ppm
Date of issue: 07/28/2014 Revision date: 01/30/2018 Supersedes: 07/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium AA Standard,
More information: Sodium Phosphate, Dibasic, Anhydrous
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Date of issue: 05/06/2015 Revision date: 04/11/2018 Supersedes: 05/06/2015 Version: 1.1 : Substance CAS-No. : 7558-79-4
More information: Murexide Indicator, Dry in Sodium Chloride
Date of issue: 12/05/2013 Revision date: 01/09/2018 Supersedes: 01/09/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Murexide Indicator,
More information: Citric Acid, 1.0M (3.0N)
Date of issue: 12/10/2013 Revision date: 04/04/2017 Supersedes: 10/10/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Citric Acid, 1.0M
More information: Potassium Iodate-Iodide, N ( M)
Date of issue: 09/23/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodate-Iodide,
More information: Phenol Red, 0.1% Aqueous
Date of issue: 04/20/2015 Revision date: 01/17/2018 Supersedes: 01/17/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Phenol Red, 0.1%
More information: Ammonia Standard, 1000ppm
Date of issue: 06/16/2014 Revision date: 09/29/2017 Supersedes: 06/16/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Ammonia Standard,
More information: Chloride Standard, 1000 ppm (0.0282N)
Date of issue: 04/08/2013 Revision date: 03/20/2017 Supersedes: 03/17/2014 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Indigo Stock Solution
Date of issue: 02/19/2015 Revision date: 11/01/2017 Supersedes: 02/19/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC15587 1.2.
More information: Stannous Chloride Reagent I, for Phosphorus
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 05/08/2015 Revision date: 04/25/2018 Supersedes: 05/08/2015 Version: 1.1 : Mixtures : : LC25230 1.2.
More information: Conductivity Standard, 84 µmho/cm
Date of issue: 12/17/2013 Revision date: 04/26/2017 Supersedes: 04/26/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Conductivity Standard,
More information: Iodine, 1.0N (0.5M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/16/2013 Revision date: 08/21/2017 Supersedes: 09/23/2015 Version: 1.2 : Mixtures : : LC15661 1.2.
More information: Sodium Chloride, 5% w/v
Date of issue: 07/26/2013 Revision date: 03/27/2018 Supersedes: 03/27/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Chloride,
More information: Magnesium Sulfate, 2.25% w/v
Date of issue: 12/23/2013 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Magnesium Sulfate,
More information: New Methylene Blue N
Date of issue: 04/17/2015 Revision date: 01/10/2018 Supersedes: 04/17/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : New Methylene Blue
More information: Methylene Blue, 1% Aqueous
Date of issue: 05/31/2013 Revision date: 01/09/2018 Supersedes: 01/28/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Phosphate Standard, 1000ppm PO4
Date of issue: 08/09/2013 Revision date: 08/10/2016 Supersedes: 08/09/2013 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Phosphate Standard,
More information: Ferric Ammonium Sulfate, Saturated
SECTION 1: Identification 1.1. Identification Product form Product name Product code Ferric Ammonium Sulfate, Saturated Date of issue: 09/27/2013 Revision date: 06/14/2017 Supersedes: 09/27/2013 Version:
More information: Calcium Chloride, 0.02M (0.04N)
Date of issue: 08/28/2014 Revision date: 12/29/2016 Supersedes: 08/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Calcium Chloride,
More information: Potassium Hydroxide, 0.1N (0.1M)
Date of issue: 12/19/2013 Revision date: 02/06/2018 Supersedes: 02/06/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Hydroxide,
More information: Toluidine Blue, 1% Aqueous
Date of issue: 08/20/2014 Revision date: 05/15/2018 Supersedes: 08/20/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC26165 1.2.
More information: Potassium Nitrate, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Potassium Nitrate, 10% w/v Date of issue: 05/08/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 :
More information: Potassium Permanganate, 1.0N (0.2M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Potassium Permanganate, 1.0N (0.2M) Date of issue: 02/04/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version:
More information: Congo Red Indicator, 0.1% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/15/2014 Revision date: 04/20/2018 Supersedes: 12/15/2014 Version: 1.1 : Mixtures : : LC13360 1.2.
More information: Ferroin Oxidation-Reduction Indicator
Date of issue: 10/04/1998 Revision date: 06/27/2017 Supersedes: 09/15/2015 Version: 1.3 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Potassium Permanganate, 0.05N (0.01M)
Date of issue: 02/04/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Permanganate,
More information: Potassium Permanganate, 0.63% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/04/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 : Mixtures : : LC19900 1.2.
More information: Potassium Iodate-Iodide, 0.1N (0.0167M)
Date of issue: 09/24/2013 Revision date: 02/13/2018 Supersedes: 10/06/2015 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodate-Iodide,
More information: Sulfuric Acid, 0.1N (0.05M)
Date of issue: 02/12/2014 Revision date: 05/08/2018 Supersedes: 02/12/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sulfuric Acid,
More information: Bromophenol Blue, 0.1% Aqueous
Date of issue: 01/31/2014 Revision date: 12/19/2016 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Bromophenol Blue,
More information: Sodium Azide, 0.5% w/v
Date of issue: 09/09/2014 Revision date: 03/12/2018 Supersedes: 09/09/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Potassium Metabisulfite
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Potassium Bisulfite Date of issue: 04/21/2015 Revision date: 01/30/2018 Supersedes: 01/30/2018 Version: 1.1 : Substance
More information: COD Standard, 1000ppm (1mL = 1mg COD)
Date of issue: 11/05/2014 Revision date: 04/05/2017 Supersedes: 11/05/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : COD Standard, 1000ppm
More information: Sodium AA Standard, 1000 ppm (1mL = 1mg Na)
Date of issue: 05/04/2015 Revision date: 12/22/2016 Supersedes: 05/04/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Sodium AA Standard,
More information: None under normal conditions Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Date of issue: 05/11/2015 Revision date: 01/25/2017 Supersedes: 05/11/2015 Version: 1.1 : Mixtures Product name : Product code : LC26670 1.2.
More information: Carbon Standard, 1000ppm, Inorganic
Date of issue: 10/14/2014 Revision date: 03/14/2017 Supersedes: 10/14/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Carbon Standard,
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
Date of issue: 12/12/2013 Revision date: 01/17/2017 Supersedes: 12/12/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : EDTA, 0.1M (0.2N)
More information: Starch-Iodide Solution
Date of issue: 05/08/2015 Revision date: 04/25/2018 Supersedes: 05/08/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Starch-Iodide Solution
More information: Nitrate Standard, 1000 ppm (as Nitrogen)
Date of issue: 12/16/2013 Revision date: 12/16/2016 Supersedes: 12/16/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Nitrate Standard,
More information: Sodium Citrate, Dihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Sodium Citrate, Dihydrate Date of issue: 11/14/2007 Revision date: 11/14/2017 Supersedes: 07/30/2013 Version: 1.1 : Substance CAS-No.
More information: Ammonium Chloride, 0.1M (0.1N)
Date of issue: 01/27/2014 Revision date: 11/02/2016 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Ammonium Chloride, 0.1M (0.1N) : LC10975
More information: Fluoride Standard, 1000 ppm
Date of issue: 04/19/2013 Revision date: 07/14/2016 Supersedes: 04/19/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Fluoride Standard,
More information: Alizarin Red S, 1% Aqueous
Date of issue: 11/01/2013 Revision date: 09/27/2016 Supersedes: 11/01/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Alizarin Red S,
More information: Hydrochloric Acid, 0.1N (0.1M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Hydrochloric Acid, 0.1N (0.1M) Date of issue: 07/03/2013 Revision date: 10/11/2017 Supersedes: 06/07/2016 Version: 1.1
More information: Ammonium Thiocyanate, 0.1N (0.1M)
Date of issue: 08/13/2014 Revision date: 12/06/2016 Supersedes: 08/13/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : LC11370 1.2. Relevant
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Date of issue: 12/05/2013 Revision date: 12/27/2016 Supersedes: 12/05/2013 Version: 1.1 : Mixtures Product name : Product code : LC12410 1.2.
More information: Lime Water, Saturated
Date of issue: 05/20/2013 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Lime Water, Saturated
More information: None under normal conditions. Name Product identifier % GHS-US classification. (CAS-No.) Aquatic Acute 1, H400
SECTION 1: Identification 1.1. Identification Product form Substance name Sodium Iodide, ACS Date of issue: 05/05/2015 Revision date: 04/04/2018 Supersedes: 05/05/2015 Version: 1.1 : Substance : Sodium
More information: Acetate Buffer ph 6.0, for Aluminum
Date of issue: 12/11/2013 Revision date: 09/06/2016 Supersedes: 09/06/2016 Version: 2.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Acetate Buffer ph
More information: Ammonium Oxalate, 4% w/v
Date of issue: 07/09/2014 Revision date: 03/06/2017 Supersedes: 11/30/2016 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC11280 1.2.
More information: Magnesium Chloride, Hexahydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Magnesium Chloride, Hexahydrate Date of issue: 01/24/2014 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 : Substance
More information: Acetic Acid, 0.2N (0.2M)
Date of issue: 12/11/2013 Revision date: 09/06/2016 Supersedes: 12/11/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : LC10360 1.2. Relevant
More information: Oxalic Acid, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Oxalic Acid, 10% w/v Date of issue: 07/29/2013 Revision date: 01/16/2018 Supersedes: 10/21/2013 Version: 2.1 : Mixtures
More information: Sodium Acetate, Trihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Sodium Acetate, Trihydrate Date of issue: 12/10/2013 Revision date: 03/12/2018 Supersedes: 03/12/2018 Version: 1.1 : Substance
More information: Citric Acid, Anhydrous
SECTION 1: Identification 1.1. Identification Product form Substance name Citric Acid, Anhydrous Date of issue: 10/24/2007 Revision date: 04/04/2017 Supersedes: 06/19/2013 Version: 1.1 : Substance CAS
More information: Lead Acetate, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/20/2015 Revision date: 11/07/2017 Supersedes: 02/20/2015 Version: 1.1 : Mixtures : : LC16100 1.2.
More information: L-tartaric acid. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification. : 2,3-Dihydroxybutanedioic acid
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Tartaric Acid Date of issue: 02/10/2015 Revision date: 05/15/2018 Supersedes: 05/15/2018 Version: 1.1 : Substance
More information: Calmagite Indicator, 0.1% Aqueous
Date of issue: 11/25/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC12850
More information: Thymolphthalein, ACS
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Thymolphthalein, ACS Date of issue: 05/08/2015 Revision date: 05/15/2018 Supersedes: 05/18/2015 Version: 1.2 : Substance
More information: Copper Sulfate, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/24/2014 Revision date: 05/03/2017 Supersedes: 09/14/2015 Version: 1.2 : Mixtures : : LC13440 1.2.
More information: Copper Sulfate, 2 g/l
Date of issue: 02/05/2014 Revision date: 05/03/2017 Supersedes: 02/05/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Copper Sulfate,
More information: Manganous Sulfate Solution, for Dissolved Oxygen
SECTION 1: Identification 1.1. Identification Product form Product name Product code Manganous Sulfate Solution, for Dissolved Oxygen Date of issue: 03/26/2015 Revision date: 11/08/2017 Supersedes: 11/08/2017
More information: Potassium Ferrocyanide, Trihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Potassium Ferrocyanide, Trihydrate Date of issue: 12/20/2004 Revision date: 01/31/2018 Supersedes: 01/31/2018 Version: 1.1 : Substance
More information: Ammonium Phosphate, Dibasic
SECTION 1: Identification 1.1. Identification Product form Substance name Ammonium Phosphate, Dibasic Date of issue: 01/24/2014 Revision date: 11/30/2016 Supersedes: 01/24/2014 Version: 1.1 : Substance
More information: Potassium Iodide, 0.5% w/v
Date of issue: 12/20/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium
More information: Fluoride Standard, 1 ppm, Premixed with TISAB II
SECTION 1: Identification 1.1. Identification Product form Product name Product code Fluoride Standard, 1 ppm, Premixed with TISAB II Date of issue: 10/01/2014 Revision date: 07/11/2017 Supersedes: 07/08/2016
More information: Hydrogen Sulfide Water
Date of issue: 07/30/2014 Revision date: 10/31/2017 Supersedes: 07/30/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Hydrogen Sulfide
More information: Acetic Acid, 1.0N (1.0M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/11/2013 Revision date: 09/06/2016 Supersedes: 09/06/2016 Version: 1.1 : Mixture : : LC10380 1.2. Relevant
More information: Ferric Ammonium Sulfate, Saturated
Date of issue: 09/27/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Ferric
More information: Sodium Carbonate, 1.0N (0.5M)
Date of issue: 01/22/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC23380
More information: Aluminum Hydroxide Suspension
Date of issue: 10/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC10840
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/Information on ingredients. 1.1.
SECTION 1: Identification 1.1. Identification Product form Date of issue: 06/12/2013 Revision date: 06/14/2017 Supersedes: 10/01/2013 Version: 1.3 : Mixtures Product name : Product code : LC14200 1.2.
More information: Diluting Fluid for Sperm
Date of issue: 12/22/2014 Revision date: 04/30/2018 Supersedes: 05/03/2017 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Diluting Fluid
More informationName Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Substance name Water Date of issue: 11/15/2013 Revision date: 01/25/2017 Supersedes: 01/25/2017 Version: 1.2 : Substance : Water CAS No : 7732-18-5
More information: Ammonium Acetate Buffer for Iron
SECTION 1: Identification 1.1. Identification Product form Product name Product code Formula Date of issue: 07/15/2014 Revision date: 11/02/2016 Version: 1.1 : Mixture : : LC10985 : ASTM D1068-96, TAPPI
More information: Potassium Iodate-Iodide, N ( M)
Date of issue: 09/23/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product code : Mixture : Potassium
More information: Sodium Arsenite, 0.5% w/v
Date of issue: 05/04/2015 Revision date: 03/12/2018 Supersedes: 05/04/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC22880 1.2.
More information: Ammonium Oxalate, Saturated
Date of issue: 07/09/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC11282
More information: Sodium Bromide, ACS
Date of issue: 05/04/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Substance Substance name : Sodium Bromide,
More information: Sodium Hydroxide, 0.01N (0.01M)
Date of issue: 10/14/2013 Revision date: 03/28/2018 Supersedes: 03/28/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Hydroxide,
More information3.1. Substance Not applicable 3.2. Mixture Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Buffer Solution ph 3.00 Date of issue: 10/14/2013 Revision date: 12/20/2016 Supersedes: 02/19/2014 Version: 1.2 : Mixture Product name : Buffer
More information: Pyridine-Barbituric Acid Reagent
SECTION 1: Identification 1.1. Identification Product form Product name Product code Pyridine-Barbituric Acid Reagent Date of issue: 03/28/2014 Revision date: 02/14/2018 Supersedes: 04/02/2014 Version:
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form TCLP Extraction Fluid #2 Date of issue: 12/23/2013 Revision date: 03/01/2018 Supersedes: 12/23/2013 Version: 1.1 : Mixtures Product name : TCLP
More information: Potassium Hydroxide, 0.05N (0.05M)
Date of issue: 12/19/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium
More information