: Fluoride Standard, 1 ppm, Premixed with TISAB II
|
|
- Theresa Lloyd
- 6 years ago
- Views:
Transcription
1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Fluoride Standard, 1 ppm, Premixed with TISAB II Date of issue: 10/01/2014 Revision date: 07/11/2017 Supersedes: 07/08/2016 Version: 2.1 : Mixtures : Fluoride Standard, 1 ppm, Premixed with TISAB II : LC Recommended use and restrictions on use Use of the substance/mixture Recommended use Restrictions on use 1.3. Supplier : For laboratory and manufacturing use only. : Laboratory chemicals : Not for food, drug or household use LabChem Inc Jackson's Pointe Commerce Park Building 1000, 1010 Jackson's Pointe Court Zelienople, PA USA T F info@labchem.com Emergency telephone number Emergency number : CHEMTREC: or SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Skin corrosion/irritation Category 2 Serious eye damage/eye irritation Category 2A H315 H319 Full text of H statements : see section 16 Causes skin irritation Causes serious eye irritation 2.2. GHS Label elements, including precautionary statements GHS-US labeling Hazard pictograms (GHS-US) : Signal word (GHS-US) Hazard statements (GHS-US) Precautionary statements (GHS-US) GHS07 : Warning 2.3. Other hazards which do not result in classification Other hazards not contributing to the classification 2.4. Unknown acute toxicity (GHS US) : H315 - Causes skin irritation H319 - Causes serious eye irritation : P264 - Wash exposed skin thoroughly after handling P280 - Wear eye protection, protective gloves P302+P352 - IF ON SKIN: Wash with plenty of soap and water P305+P351+P338 - If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing P332+P313 - If skin irritation occurs: Get medical advice/attention P337+P313 - If eye irritation persists: Get medical advice/attention P362+P364 - Take off contaminated clothing and wash it before reuse SECTION 3: Composition/Information on ingredients 3.1. Substances 07/11/2017 EN (English US) Page 1
2 3.2. Mixtures Name Product identifier % GHS-US classification Water (CAS-No.) Not classified Sodium Chloride (CAS-No.) Not classified Acetic Acid (CAS-No.) Flam. Liq. 3, H226 Skin Corr. 1B, H314 Eye Dam. 1, H318 Aquatic Acute 3, H402 Sodium Hydroxide (CAS-No.) Acute Tox. 4 (Dermal), H312 Skin Corr. 1A, H314 Eye Dam. 1, H318 Aquatic Acute 3, H402 CDTA (CAS-No.) Skin Irrit. 2, H315 Eye Irrit. 2A, H319 STOT SE 3, H335 Sodium Fluoride (CAS-No.) Acute Tox. 3 (Oral), H301 Skin Irrit. 2, H315 Eye Irrit. 2A, H319 Aquatic Acute 3, H402 Full text of hazard classes and H-statements : see section 16 SECTION 4: First-aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Wash with plenty of soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention. Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects (acute and delayed) Symptoms/effects Symptoms/effects after eye contact : Not expected to present a significant hazard under anticipated conditions of normal use. : Causes serious eye irritation Immediate medical attention and special treatment, if necessary None. SECTION 5: Fire-fighting measures 5.1. Suitable (and unsuitable) extinguishing media Suitable extinguishing media Unsuitable extinguishing media 5.2. Specific hazards arising from the chemical Fire hazard Explosion hazard Reactivity : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream. : Not flammable. : Special protective equipment and precautions for fire-fighters Firefighting instructions Protection during firefighting SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection For non-emergency personnel Protective equipment Emergency procedures : Safety glasses. Gloves. : Evacuate unnecessary personnel. 07/11/2017 EN (English US) 2/9
3 For emergency responders Protective equipment Emergency procedures : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials : Keep container closed when not in use. : Strong oxidizers. : Sources of ignition. Direct sunlight. SECTION 8: Exposure controls/personal protection 8.1. Control parameters ACGIH ACGIH TWA (ppm) 10 ppm (Acetic acid; USA; Time-weighted average exposure limit 8 h; TLV - Adopted Value) ACGIH ACGIH STEL (ppm) 15 ppm (Acetic acid; USA; Short time value; TLV - Adopted Value) OSHA OSHA PEL (TWA) (mg/m³) 25 mg/m³ OSHA OSHA PEL (TWA) (ppm) 10 ppm IDLH US IDLH (ppm) 50 ppm NIOSH NIOSH REL (TWA) (mg/m³) 25 mg/m³ NIOSH NIOSH REL (TWA) (ppm) 10 ppm NIOSH NIOSH REL (STEL) (mg/m³) 37 mg/m³ NIOSH NIOSH REL (STEL) (ppm) 15 ppm CDTA ( ) ACGIH ACGIH Ceiling (mg/m³) 2 mg/m³ (Sodium hydroxide; USA; Momentary value; TLV - Adopted Value) OSHA OSHA PEL (TWA) (mg/m³) 2 mg/m³ IDLH US IDLH (mg/m³) 10 mg/m³ NIOSH NIOSH REL (ceiling) (mg/m³) 2 mg/m³ ACGIH ACGIH TWA (mg/m³) 2.5 mg/m³ (Fluorides, as F; USA; Time-weighted average exposure limit 8 h; TLV - Adopted Value) 07/11/2017 EN (English US) 3/9
4 8.2. Appropriate engineering controls Appropriate engineering controls : Emergency eye wash fountains should be available in the immediate vicinity of any potential exposure Individual protection measures/personal protective equipment Personal protective equipment: Gloves. Safety glasses. Hand protection: Wear protective gloves Eye protection: Chemical goggles or safety glasses Respiratory protection: Respiratory protection not required in normal conditions Other information: Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state Appearance Color Odor Odor threshold : Liquid : Clear, colorless liquid. : Colorless ph : Melting point Freezing point Boiling point Flash point Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density Solubility Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosion limits Explosive properties Oxidizing properties 9.2. Other information No additional information available : Non flammable. : Soluble in water. :. 07/11/2017 EN (English US) 4/9
5 SECTION 10: Stability and reactivity Reactivity None Chemical stability Stable under normal conditions Possibility of hazardous reactions Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials Strong oxidizers Hazardous decomposition products Carbon monoxide. Carbon dioxide. Nitrogen oxides. SECTION 11: Toxicological information Information on toxicological effects Likely routes of exposure Acute toxicity LD50 oral rat ATE US (oral) ATE US (dermal) LD50 oral rat LD50 dermal rat ATE US (oral) ATE US (dermal) ATE US (dust, mist) LD50 oral rat ATE US (oral) LD50 oral rat ATE US (oral) Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity : Skin and eye contact 3310 mg/kg body weight (Rat; Other; Read-across) 3310 mg/kg body weight 1350 mg/kg body weight 3000 mg/kg mg/kg 3000 mg/kg body weight mg/kg body weight mg/l/4h mg/kg mg/kg body weight 52 mg/kg (Rat) 52 mg/kg body weight : Causes skin irritation. ph: : Causes serious eye irritation. ph: IARC group Reproductive toxicity Specific target organ toxicity single exposure 3 - Not classifiable 07/11/2017 EN (English US) 5/9
6 Specific target organ toxicity repeated exposure Aspiration hazard Potential Adverse human health effects and symptoms Symptoms/effects after eye contact : Based on available data, the classification criteria are not met. : Causes serious eye irritation. SECTION 12: Ecological information Toxicity LC50 fish 1 LC50 fish 1 EC50 Daphnia mg/l (LC50; Other; 96 h; Salmo gairdneri; Static system; Fresh water; Experimental value) 7650 mg/l 1000 mg/l LC50 fish 1 > 530 mg/l (LC50; 96 h) EC50 Daphnia 1 98 mg/l (EC50; 48 h) Fluoride Standard, 1 ppm, Premixed with TISAB II Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD Biochemical oxygen demand (BOD) Chemical oxygen demand (COD) ThOD Readily biodegradable in water. Biodegradable in the soil. Highly mobile in soil g O₂/g substance 1.03 g O₂/g substance 1.07 g O₂/g substance Biodegradability: not applicable. No test data on mobility of the substance available. Biodegradability: not applicable Fluoride Standard, 1 ppm, Premixed with TISAB II BCF fish 1 Log Pow 3.16 (BCF; Pisces) (Experimental value; 25 C) 07/11/2017 EN (English US) 6/9
7 Low potential for bioaccumulation (Log Kow < 4). BCF fish 1 No bioaccumulation data available. 2.3 (BCF) Not bioaccumulative Mobility in soil Surface tension Log Koc Ecology - soil N/m (20 C) log Koc,0.06; QSAR May be harmful to plant growth, blooming and fruit formation. Ecology - soil Toxic to flora Other adverse effects Effect on the global warming GWPmix comment Other information : No known effects from this product. : No known effects from this product. : Avoid release to the environment. SECTION 13: Disposal considerations Disposal methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT Not regulated SECTION 15: Regulatory information US Federal regulations Not subject to reporing requirements of the United States SARA Section 313 RQ (Reportable quantity, section 304 of EPA's List of Lists) 5000 lb Not subject to reporing requirements of the United States SARA Section 313 RQ (Reportable quantity, section 304 of EPA's List of Lists) SARA Section 311/312 Hazard Classes 1000 lb Immediate (acute) health hazard 07/11/2017 EN (English US) 7/9
8 Not subject to reporing requirements of the United States SARA Section 313 RQ (Reportable quantity, section 304 of EPA's List of Lists) 1000 lb International regulations CANADA Listed on the Canadian DSL (Domestic Substances List) Listed on the Canadian DSL (Domestic Substances List) Listed on the Canadian DSL (Domestic Substances List) Listed on the Canadian DSL (Domestic Substances List) EU-Regulations No additional information available National regulations Listed on the Canadian IDL (Ingredient Disclosure List) Not listed on the Canadian IDL (Ingredient Disclosure List) Listed on the Canadian IDL (Ingredient Disclosure List) US State regulations No additional information available SECTION 16: Other information Revision date : 07/11/2017 Other information 07/11/2017 EN (English US) 8/9
9 Full text of H-phrases: see section 16: H226 H301 H312 H314 H315 H318 H319 H335 H402 NFPA health hazard NFPA fire hazard NFPA reactivity Flammable liquid and vapor Toxic if swallowed Harmful in contact with skin Causes severe skin burns and eye damage Causes skin irritation Causes serious eye damage Causes serious eye irritation May cause respiratory irritation Harmful to aquatic life : 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials. : 0 - Materials that will not burn under typical dire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand. : 0 - Material that in themselves are normally stable, even under fire conditions. Hazard Rating Health Flammability Physical Personal protection : 0 Minimal Hazard - No significant risk to health : 0 Minimal Hazard - Materials that will not burn : 0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives. : B B - Safety glasses, Gloves SDS US LabChem Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and LabChem Inc assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for his application. 07/11/2017 EN (English US) 9/9
: Potassium Chloride, 4M, Saturated with Silver Chloride
Potassium Chloride, 4M, Saturated with Silver Chloride Date of issue: 11/29/1998 Revision date: 01/31/2018 Supersedes: 06/27/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form
More information: Sodium Bicarbonate-Sodium Chloride Solution
Date of issue: 01/22/2014 Revision date: 03/13/2018 Supersedes: 03/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Bicarbonate-Sodium
More information: Phenol Red, 0.1% Aqueous
Date of issue: 04/20/2015 Revision date: 01/17/2018 Supersedes: 01/17/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Phenol Red, 0.1%
More information: Potassium AA Standard, 100 ppm
Date of issue: 07/28/2014 Revision date: 01/30/2018 Supersedes: 07/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium AA Standard,
More information: Potassium AA Standard, 1000 ppm
Date of issue: 07/28/2014 Revision date: 01/30/2018 Supersedes: 07/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium AA Standard,
More information: Sodium Carbonate, 1.0N (0.5M)
Date of issue: 01/22/2014 Revision date: 03/20/2018 Supersedes: 03/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Carbonate,
More information: Sodium Carbonate, 5% w/v
Date of issue: 01/22/2014 Revision date: 03/20/2018 Supersedes: 03/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Carbonate,
More information: Sodium Sulfite, 5% w/v
Date of issue: 05/06/2015 Revision date: 04/11/2018 Supersedes: 05/06/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC24940 1.2.
More information: Potassium Oxalate, 2% w/v
Date of issue: 11/21/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Oxalate,
More information: Potassium Iodide, 2% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
More information: Ammonia Standard, 1000ppm
Date of issue: 06/16/2014 Revision date: 09/29/2017 Supersedes: 06/16/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Ammonia Standard,
More information: Lactic Acid, 10% v/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/19/2015 Revision date: 11/07/2017 Supersedes: 02/05/2016 Version: 1.3 : Mixtures : : LC16000 1.2.
More information: Toluidine Blue, 1% Aqueous
Date of issue: 08/20/2014 Revision date: 05/15/2018 Supersedes: 08/20/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC26165 1.2.
More information: Murexide Indicator, Dry in Sodium Chloride
Date of issue: 12/05/2013 Revision date: 01/09/2018 Supersedes: 01/09/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Murexide Indicator,
More information: Magnesium Sulfate, 2.25% w/v
Date of issue: 12/23/2013 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Magnesium Sulfate,
More information: Sodium Chloride, 5% w/v
Date of issue: 07/26/2013 Revision date: 03/27/2018 Supersedes: 03/27/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Chloride,
More information: Safranin, 1% Aqueous
Date of issue: 04/24/2015 Revision date: 02/20/2018 Supersedes: 02/20/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Safranin, 1% Aqueous
More information: Indigo Stock Solution
Date of issue: 02/19/2015 Revision date: 11/01/2017 Supersedes: 02/19/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC15587 1.2.
More information: Chloride Standard, 1000 ppm (0.0282N)
Date of issue: 04/08/2013 Revision date: 03/20/2017 Supersedes: 03/17/2014 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Potassium Hydroxide, 0.1N (0.1M)
Date of issue: 12/19/2013 Revision date: 02/06/2018 Supersedes: 02/06/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Hydroxide,
More information: Potassium Iodide, 10% w/v
Date of issue: 12/20/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide,
More information: Methylene Blue, 1% Aqueous
Date of issue: 05/31/2013 Revision date: 01/09/2018 Supersedes: 01/28/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Fluoride Standard, 10 ppm, Premixed with TISAB II
SECTION 1: Identification 1.1. Identification Product form Product name Product code Fluoride Standard, 10 ppm, Premixed with TISAB II Date of issue: 10/01/2014 Revision date: 07/08/2016 Supersedes: 07/08/2016
More information: Fluoride Standard, 1000 ppm
Date of issue: 04/19/2013 Revision date: 07/14/2016 Supersedes: 04/19/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Fluoride Standard,
More information: Potassium Iodate-Iodide, N ( M)
Date of issue: 09/23/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodate-Iodide,
More information: Conductivity Standard, 84 µmho/cm
Date of issue: 12/17/2013 Revision date: 04/26/2017 Supersedes: 04/26/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Conductivity Standard,
More information: Phosphate Standard, 1000ppm PO4
Date of issue: 08/09/2013 Revision date: 08/10/2016 Supersedes: 08/09/2013 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Phosphate Standard,
More information: Alizarin Red S, 1% Aqueous
Date of issue: 11/01/2013 Revision date: 09/27/2016 Supersedes: 11/01/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Alizarin Red S,
More information: Potassium Iodate-Iodide, 0.1N (0.0167M)
Date of issue: 09/24/2013 Revision date: 02/13/2018 Supersedes: 10/06/2015 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodate-Iodide,
More information: New Methylene Blue N
Date of issue: 04/17/2015 Revision date: 01/10/2018 Supersedes: 04/17/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : New Methylene Blue
More information: Ferroin Oxidation-Reduction Indicator
Date of issue: 10/04/1998 Revision date: 06/27/2017 Supersedes: 09/15/2015 Version: 1.3 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Acetate Buffer ph 6.0, for Aluminum
Date of issue: 12/11/2013 Revision date: 09/06/2016 Supersedes: 09/06/2016 Version: 2.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Acetate Buffer ph
More information: Stannous Chloride Reagent I, for Phosphorus
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 05/08/2015 Revision date: 04/25/2018 Supersedes: 05/08/2015 Version: 1.1 : Mixtures : : LC25230 1.2.
More information: Calcium Chloride, 0.02M (0.04N)
Date of issue: 08/28/2014 Revision date: 12/29/2016 Supersedes: 08/28/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Calcium Chloride,
More information: Potassium Nitrate, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Potassium Nitrate, 10% w/v Date of issue: 05/08/2013 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 :
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Date of issue: 12/05/2013 Revision date: 12/27/2016 Supersedes: 12/05/2013 Version: 1.1 : Mixtures Product name : Product code : LC12410 1.2.
More information: Sodium Phosphate, Dibasic, Anhydrous
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Date of issue: 05/06/2015 Revision date: 04/11/2018 Supersedes: 05/06/2015 Version: 1.1 : Substance CAS-No. : 7558-79-4
More information: Carbon Standard, 1000ppm, Inorganic
Date of issue: 10/14/2014 Revision date: 03/14/2017 Supersedes: 10/14/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Carbon Standard,
More information: Acetic Acid, 0.2N (0.2M)
Date of issue: 12/11/2013 Revision date: 09/06/2016 Supersedes: 12/11/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : LC10360 1.2. Relevant
More information: Potassium Iodide-Iodine Reagent
Date of issue: 01/28/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Iodide-Iodine
More information: COD Standard, 1000ppm (1mL = 1mg COD)
Date of issue: 11/05/2014 Revision date: 04/05/2017 Supersedes: 11/05/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : COD Standard, 1000ppm
More information: Starch-Iodide Solution
Date of issue: 05/08/2015 Revision date: 04/25/2018 Supersedes: 05/08/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Starch-Iodide Solution
More information: Ferric Ammonium Sulfate, Saturated
SECTION 1: Identification 1.1. Identification Product form Product name Product code Ferric Ammonium Sulfate, Saturated Date of issue: 09/27/2013 Revision date: 06/14/2017 Supersedes: 09/27/2013 Version:
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
Date of issue: 12/12/2013 Revision date: 01/17/2017 Supersedes: 12/12/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : EDTA, 0.1M (0.2N)
More information: None under normal conditions Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Date of issue: 05/11/2015 Revision date: 01/25/2017 Supersedes: 05/11/2015 Version: 1.1 : Mixtures Product name : Product code : LC26670 1.2.
More information: Sodium Citrate, Dihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Sodium Citrate, Dihydrate Date of issue: 11/14/2007 Revision date: 11/14/2017 Supersedes: 07/30/2013 Version: 1.1 : Substance CAS-No.
More information: Citric Acid, 1.0M (3.0N)
Date of issue: 12/10/2013 Revision date: 04/04/2017 Supersedes: 10/10/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Citric Acid, 1.0M
More information: Acetic Acid, 1.0N (1.0M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/11/2013 Revision date: 09/06/2016 Supersedes: 09/06/2016 Version: 1.1 : Mixture : : LC10380 1.2. Relevant
More information: Congo Red Indicator, 0.1% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/15/2014 Revision date: 04/20/2018 Supersedes: 12/15/2014 Version: 1.1 : Mixtures : : LC13360 1.2.
More information: Potassium Permanganate, 0.05N (0.01M)
Date of issue: 02/04/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Potassium Permanganate,
More information: Magnesium Chloride, Hexahydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Magnesium Chloride, Hexahydrate Date of issue: 01/24/2014 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 : Substance
More information: Sulfuric Acid, 0.1N (0.05M)
Date of issue: 02/12/2014 Revision date: 05/08/2018 Supersedes: 02/12/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sulfuric Acid,
More information: Sodium AA Standard, 1000 ppm (1mL = 1mg Na)
Date of issue: 05/04/2015 Revision date: 12/22/2016 Supersedes: 05/04/2015 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Sodium AA Standard,
More information: Potassium Metabisulfite
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Potassium Bisulfite Date of issue: 04/21/2015 Revision date: 01/30/2018 Supersedes: 01/30/2018 Version: 1.1 : Substance
More information: Potassium Permanganate, 0.63% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/04/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version: 1.1 : Mixtures : : LC19900 1.2.
More information: Ammonium Chloride, 0.1M (0.1N)
Date of issue: 01/27/2014 Revision date: 11/02/2016 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Ammonium Chloride, 0.1M (0.1N) : LC10975
More information: None under normal conditions. Name Product identifier % GHS-US classification. (CAS-No.) Aquatic Acute 1, H400
SECTION 1: Identification 1.1. Identification Product form Substance name Sodium Iodide, ACS Date of issue: 05/05/2015 Revision date: 04/04/2018 Supersedes: 05/05/2015 Version: 1.1 : Substance : Sodium
More information: Bromophenol Blue, 0.1% Aqueous
Date of issue: 01/31/2014 Revision date: 12/19/2016 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Bromophenol Blue,
More information: Ammonium Thiocyanate, 0.1N (0.1M)
Date of issue: 08/13/2014 Revision date: 12/06/2016 Supersedes: 08/13/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : LC11370 1.2. Relevant
More information: Oxalic Acid, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Oxalic Acid, 10% w/v Date of issue: 07/29/2013 Revision date: 01/16/2018 Supersedes: 10/21/2013 Version: 2.1 : Mixtures
More information: Sodium Acetate, Trihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Sodium Acetate, Trihydrate Date of issue: 12/10/2013 Revision date: 03/12/2018 Supersedes: 03/12/2018 Version: 1.1 : Substance
More information: Sodium Azide, 0.5% w/v
Date of issue: 09/09/2014 Revision date: 03/12/2018 Supersedes: 09/09/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code Other means of identification
More information: Lead Acetate, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/20/2015 Revision date: 11/07/2017 Supersedes: 02/20/2015 Version: 1.1 : Mixtures : : LC16100 1.2.
More information: Lime Water, Saturated
Date of issue: 05/20/2013 Revision date: 11/08/2017 Supersedes: 11/08/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Lime Water, Saturated
More information: Iodine, 0.01N (0.005M)
Date of issue: 12/13/2013 Revision date: 11/01/2017 Supersedes: 12/13/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Iodine, 0.01N (0.005M)
More information: Calmagite Indicator, 0.1% Aqueous
Date of issue: 11/25/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC12850
More information: Nitrate Standard, 1000 ppm (as Nitrogen)
Date of issue: 12/16/2013 Revision date: 12/16/2016 Supersedes: 12/16/2013 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : Nitrate Standard,
More information: Iodine, 0.025N (0.0125M)
Date of issue: 12/16/2013 Revision date: 11/01/2017 Supersedes: 11/01/2017 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Iodine, 0.025N
More information: Thymolphthalein, ACS
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Thymolphthalein, ACS Date of issue: 05/08/2015 Revision date: 05/15/2018 Supersedes: 05/18/2015 Version: 1.2 : Substance
More information: Chloride Standard, 500 ppm (0.0141N)
Revision date: 04/08/2013 Supersedes:04/07/2010 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. Product
More information: L-tartaric acid. SECTION 1: Identification. SECTION 2: Hazard(s) identification Identification. : 2,3-Dihydroxybutanedioic acid
SECTION 1: Identification 1.1. Identification Product form Substance name Chemical name Tartaric Acid Date of issue: 02/10/2015 Revision date: 05/15/2018 Supersedes: 05/15/2018 Version: 1.1 : Substance
More information3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form TCLP Extraction Fluid #2 Date of issue: 12/23/2013 Revision date: 03/01/2018 Supersedes: 12/23/2013 Version: 1.1 : Mixtures Product name : TCLP
More information: Potassium Permanganate, 1.0N (0.2M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Potassium Permanganate, 1.0N (0.2M) Date of issue: 02/04/2014 Revision date: 02/13/2018 Supersedes: 02/13/2018 Version:
More informationSECTION 1: Identification. SECTION 2: Hazard(s) identification. SECTION 3: Composition/information on ingredients. 1.1.
SECTION 1: Identification 1.1. Identification Product form Date of issue: 12/09/2013 Revision date: 03/09/2018 Supersedes: 09/19/2016 Version: 1.3 : Mixtures Product name : Product code : LC10180 1.2.
More information: Sodium Hydroxide, 0.01N (0.01M)
Date of issue: 10/14/2013 Revision date: 03/28/2018 Supersedes: 03/28/2018 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Sodium Hydroxide,
More information: Potassium Ferrocyanide, Trihydrate
SECTION 1: Identification 1.1. Identification Product form Substance name Potassium Ferrocyanide, Trihydrate Date of issue: 12/20/2004 Revision date: 01/31/2018 Supersedes: 01/31/2018 Version: 1.1 : Substance
More information: Potassium Iodide, 0.5% w/v
Date of issue: 12/20/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Potassium
More information: Hydrochloric Acid, 0.1N (0.1M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Hydrochloric Acid, 0.1N (0.1M) Date of issue: 07/03/2013 Revision date: 10/11/2017 Supersedes: 06/07/2016 Version: 1.1
More information: Ammonium Oxalate, 4% w/v
Date of issue: 07/09/2014 Revision date: 03/06/2017 Supersedes: 11/30/2016 Version: 1.2 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : : LC11280 1.2.
More information: Sodium Carbonate, 1.0N (0.5M)
Date of issue: 01/22/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC23380
More information: Conductivity Standard, 1500 µmho/cm
Date of issue: 12/17/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Conductivity
More information: Conductivity Standard, 1000 µmho/cm
Date of issue: 12/17/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Conductivity
More information: Ammonium Acetate Buffer for Iron
SECTION 1: Identification 1.1. Identification Product form Product name Product code Formula Date of issue: 07/15/2014 Revision date: 11/02/2016 Version: 1.1 : Mixture : : LC10985 : ASTM D1068-96, TAPPI
More information: Sodium Chloride, 30% w/v
Date of issue: 07/29/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Sodium
More information: Sodium Citrate, 30% w/v
75126 Date of issue: 04/11/1999 Revision date: 07/30/2013 Supersedes: 11/08/2011 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Copper Sulfate, 10% w/v
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 02/24/2014 Revision date: 05/03/2017 Supersedes: 09/14/2015 Version: 1.2 : Mixtures : : LC13440 1.2.
More information: Methyl Orange, 0.1% Aqueous
Date of issue: 01/31/2014 Revision date: 05/20/2014 Supersedes: 01/31/2014 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking
Date of issue: 09/27/2013 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name. : Product code : LC14270
More information: Iodine, 0.1N (0.05M)
SECTION 1: Identification 1.1. Identification Product form Product name Product code Date of issue: 12/16/2013 Revision date: 08/17/2017 Supersedes: 09/23/2015 Version: 1.2 : Mixtures : : LC15660 1.2.
More information: HEPES Buffered Saline
Date of issue: 04/14/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : HEPES
More information: Ammonium Sulfate, 10% w/v
Date of issue: 04/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Ammonium
More information: Copper Sulfate, 2 g/l
Date of issue: 02/05/2014 Revision date: 05/03/2017 Supersedes: 02/05/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Copper Sulfate,
More information: Glucose-Glutamic Acid
Date of issue: 12/09/2013 Revision date: 03/05/2014 Supersedes: 12/09/2013 Version: 1.1 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product
More information: Manganous Sulfate Solution, for Dissolved Oxygen
SECTION 1: Identification 1.1. Identification Product form Product name Product code Manganous Sulfate Solution, for Dissolved Oxygen Date of issue: 03/26/2015 Revision date: 11/08/2017 Supersedes: 11/08/2017
More information: Methyl Orange, Modified
Date of issue: 04/10/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Methyl
More information: Hydrogen Sulfide Water
Date of issue: 07/30/2014 Revision date: 10/31/2017 Supersedes: 07/30/2014 Version: 1.1 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixtures : Hydrogen Sulfide
More information: Silica Standard, 1000 ppm
Date of issue: 04/25/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : Silica
More information: Aluminum Hydroxide Suspension
Date of issue: 10/21/2014 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name Product code : Mixture : : LC10840
More information