Katun Corporation Bush Lake Road Minneapolis, MN USA Effective: July 30, 2004 (952) Replaces edition dated: October 25, 2001
|
|
- Terence Haynes
- 6 years ago
- Views:
Transcription
1 Katun Corporation Bush Lake Road Minneapolis, MN USA Effective: July 30, 2004 (952) Replaces edition dated: October 25, 2001 SECTION 1 - IDENTITY OF PRODUCT Katun Toner Cartridge for use in: Hewlett Packard LJ 1200, 1220, 3300, 3320, 3300, L 800, l 900, l 8500, L 9000, L 9500 Series Katun PN: , I TONER II Organic Photoconductor Drum (OPC) See Pages 4 ~ 6 Section 2 - COMPOSITION / INFORMATION INGREDIENTS Chemical Name CAS # % Resin % Charge Agent % Wax % Colorant % Surface Additive % SECTION 3 - HAZARD IDENTIFICATION Hazard Symbols: N/A Risk & Safety: S22 (Do not breathe dust) S47 (Keep at temperature not exceeding 351 C) SECTION 4 - FIRST AID MEASURES Inhalation: Removed to fresh air area. Aid in breathing if necessary and get medical attention. Eyes: Immediately wash eyes with running water for 15 minutes. If irritation develops, get medical attention. Skin: Wash affected areas with soap and water. If irritation develops, get medical attention. Remove and launder contaminated clothing before reuse. N/A = Not Applicable Page 1 of 7
2 Ingestion: If swallowed, dilute with water and immediately induce vomiting. Never give fluids or induce vomiting if the victim is unconscious or having convulsions. Get medical attention. N/A = Not Applicable Page 2 of 7
3 SECTION 5 - FIRE-FIGHTING MEASURES Suitable Extinguishers: Water, CO2, Foam, Dry Chemical Unsuitable Extinguishers: N/A Hazardous Decomposition: None under normal handling and use. Special Procedures: Not flammable or combustible but will burn if ignited. Extinguish with water. CO2, Foam, Dry Chemical SECTION 6 - ACCIDENTAL RELEASE MEASURES Exposure Controls: Sweep material onto paper or shovel, place in container for incineration. To vacuum or sweep up with dust cleaner is recommended. Personal Protection: None required under normal use. In industrial chemical handling, wearing of dust mask, protective gloves and safety glasses are recommended. Disposable Consideration: Do not discharge into sewer, streams or waterways. Dispose in accordance with local, state and federal regulations. SECTION 7 - HANDLING AND STORAGE Handling: Storage: Avoid dust inhalation and skin contact. Keep containers closed. Store in cool, dry place. Keep away from contact with oxidizing materials. Recommended below 351C. SECTION 8 - EXPOSURE CONTROLS Occupational Exposure Limit: Biological Exposure Limit: In industrial handling, good ventilation system should be installed. N/A *PEL as the Product: 15 mg/ 3 (Total Dust), 5 mg/m 3 (Respirable Dust) *TLV as the Product: 10 mg/ 3 (Total Dust), 5 mg/m 3 (Respirable Dust) SECTION 9 - PHYSICAL & CHEMICAL PROPERTIES Appearance: Fine black powder Odor: Practically odorless ph: N/A Boiling Point/Range: N/A Melting Point/Range: 1501C Flash Point: N/A Flammability: N/A Autoflammability: N/A Explosive Properties: N/A Oxidizing Properties; N/A Vapor Pressure: N/A Relative Density: (H20 = 1) 1.1 Solubility: Insoluble Partition Coefficient: N/A Miscibility: N/A Vapor Density: N/A Evaporation Rate: N/A Viscosity: N/A N/A = Not Applicable Page 3 of 7
4 SECTION 10 - STABILITY AND REACTIVITY Stable in normal conditions. Condition to avoid is abnormally high temperature. Hazardous polymerization and hazardous decomposition or byproducts will not occur in normal conditions. SECTION 11 - TOXICOLOGICAL INFORMATION Health hazard is minimal being neither irritating, corrosive, volatile nor toxic. Mutagenicity is negative. Not use carcinogens which are listed in NTP, IARC and OSHA. SECTION 12 - ECOLOGICAL INFORMATION Data are not available. SECTION 13 - DISPOSAL CONSIDERATIONS Do not discharge into sewer, streams or waterways. Dispose in accordance with local, state and federal regulations. Disposal is usually carried out by burying at an approved tips. SECTION 14 - TRANSPORT INFORMATION Transport Name: N/A Hazchem / Kemler Code: N/A SECTION 15 - REGULATORY INFORMATION Hazard/Symbols: N/A Risk & Safety: R-phrases: N/A S-phrases: S22 (Do not breathe dust) S47 (Keep at temperature not exceeding 351C) Other Regulations: N/A Transport Information: Transport Name: N/A Hazchem / Kemler Code: N/A SECTION 16 - OTHER INFORMATION None. N/A = Not Applicable Page 4 of 7
5 SECTION 1 - IDENTITY OF PRODUCT II Organic Photoconductor Drum (OPC) Effective: July 30, 2004 Replaces Edition Dated: August 7, 1995 Note: Photoreceptors are considered articles under OSHA definitions, and as such are exempt from the requirements of the Federal Hazard Communication Standard. 29 CFR defines an article as a manufactured item: I) which is formed to a specific shape or design during manufacture; ii) which has end use function(s) dependent in whole or in part upon its shape or design during end use; and iii) which does not release, or otherwise result in exposure to, a hazardous chemical under normal conditions of use. Because of this exemption for articles, Katun Corporation supplies only a single MSDS for each class of photoreceptors that we carry, and the MSDS is intended to apply to that class of photoreceptors in general, rather than to any single part number or group of part numbers in particular. Section 2 - COMPOSITION / INFORMATION INGREDIENTS Chemical Name CAS # % OSHA PEL ACHIH TLV OTHER LIMITS Aluminum Drum >97% -- Not Listed None Binder Resin N/A <1% -- Not Listed None Photosensitive Material N/A <1% -- Not Listed None Pigment N/A <1% -- Not Listed None SECTION 3 - HAZARD IDENTIFICATION Hazard Symbols: N/A Risk & Safety: N/A SECTION 4 - FIRST AID MEASURES Inhalation: No risk of exposure under normal operating conditions. Eyes: No risk of exposure under normal operating conditions. Skin: No risk of exposure under normal operating conditions. Ingestion: No risk of exposure under normal operating conditions. SECTION 5 - FIRE-FIGHTING MEASURES Suitable Extinguishers: CO2, Foam, or Dry Chemical. If fire is in copier, treat as an electrical fire do not use water. Unsuitable Extinguishers: N/A Hazardous Decomposition: None under normal handling and use. Special Procedures: Avoid inhalation of smoke. N/A = Not Applicable Page 5 of 7
6 SECTION 6 - ACCIDENTAL RELEASE MEASURES Exposure Controls: No risk of exposure under normal operating conditions. Personal Protection: None required under normal use. Disposable Consideration: Dispose in accordance with local, state and federal regulations. SECTION 7 - HANDLING AND STORAGE Handling: Storage: Avoid contact with strong acids. To maintain product performance, avoid touching product directly. Store in a cool, dry place. SECTION 8 - EXPOSURE CONTROLS Occupational Exposure Limit: Biological Exposure Limit: N/A N/A SECTION 9 - PHYSICAL & CHEMICAL PROPERTIES Appearance: Aluminum cylinder coated with a thin, colored organic/polymer film. Odor: Odorless Boiling Point/Range: N/A ph: N/A Flash Point: N/A Melting Point/Range: N/A Explosive Properties: N/A Flammability: N/A Autoflammability: N/A Oxidizing Properties; N/A Relative Density: (H20 = 1) 2.7 Overall (1.2 for coating) Vapor Pressure: N/A Solubility: Insoluble Partition Coefficient: N/A Vapor Density: N/A Evaporation Rate: N/A Viscosity: N/A SECTION 10 - STABILITY AND REACTIVITY Stability: Stable (except above 200 C). Conditions to Avoid: Abnormally high temperatures. Incompatibility (Materials to Avoid): Strong acids and strong alkalis. Hazardous Decomposition or Byproducts: Carbon Monoxide, carbon dioxide, nitrogen oxides, and smoke. Hazardous Polymerization: Will not occur. SECTION 11 - TOXICOLOGICAL INFORMATION Product Carcinogenicity: Mutagenicity is negative. NTP: Not Listed IARC Monographs: Not Listed OSHA Regulated: Not Listed Acute Oral Toxicity: LD 50 value of the coating on the aluminum substrate in an oral toxicity test is over 5,000 mg/kg N/A = Not Applicable Page 6 of 7
7 SECTION 12 - ECOLOGICAL INFORMATION Data is not available. SECTION 13 - DISPOSAL CONSIDERATIONS Waste OPC coatings contain no hazardous substances, and can therefore be discarded in the same manner as waste metal or plastic. SECTION 14 - TRANSPORT INFORMATION Transport Name: N/A Hazchem / Kemler Code: N/A SECTION 15 - REGULATORY INFORMATION Hazard/Symbols: N/A Risk & Safety: N/A Other Regulations: N/A Transport Information: Transport Name: N/A Hazchem / Kemler Code: N/A SECTION 16 - OTHER INFORMATION HMIS Hazard Rating: Health: 0 Flammability: 0 Reactivity: 0 N/A = Not Applicable Page 7 of 7
Dell 1720 Standard Capacity Toner Cartridge
Material Safety Data Sheet PN Dell 1720 Standard Capacity Toner Cartridge Section 1 - Product and Company Identification Product Name: Dell 1720 Standard Capacity Toner Cartridge Manufacturer: Dell Computer
More informationDell B2360/B3460/B3465 Use and Return Imaging Unit
Material Safety Data Sheet P/N KVK63 Material Safety Data Sheets are not required for print cartridges. For customer convenience, Dell provides product information in this familiar format. Section 1 -
More informationMaterial Safety Data Sheet Yellow Print Cartridge
Material Safety Data Sheet Yellow Print Cartridge Section 1 - Product and Company Identification PN: ; C780H2YG; C782X2YG C780A1YG; C780H1YG; C782X1YG Lexmark has determined that Material Safety Data Sheets
More informationSAFETY DATA SHEET. Name, address, and telephone number of the chemical manufacturer, importer, or other responsible party; Name: Department in Charge:
SAFETY DATA SHEET Page1 of 7 Section 1: Identification Product identifier used on the label; Product name: (HotHands warmers, hand warmers, body warmers, foot warmers, insole foot warmers, toe warmers,
More informationHEWLETT-PACKARD COMPANY Chinden Blvd. Boise, ID 83714
Material Safety Data Sheet Issue date: January 2, 2001 1.0 Preparation and company identity Identification of the preparation Company identification Telephone number HP Laser Jet Cartridge C3906A HEWLETT-PACKARD
More informationHEWLETT-PACKARD COMPANY Chinden Blvd. Boise, ID 83714
Material Safety Data Sheet 1.0 Preparation and company identity Identification of the preparation Company identification Telephone number HP Laser Jet Cartridge C3903A HEWLETT-PACKARD COMPANY 11311 Chinden
More informationMATERIAL SAFETY DATA SHEET
Section I - Company / Product Identity Product Identification: HPCLJ 2025 Black TN7520 Original Release Date: 01-31-11 Issue: 1 Revised Date: Company : Turbon Group 4350 Haddonfield Rd Suite 300 Pennsauken,
More informationHEWLETT-PACKARD COMPANY Chinden Blvd. Boise, ID 83714
Material Safety Data Sheet 1.0 Preparation and company identity Identification of the preparation Company identification Telephone number HP Laser Jet Cartridge 92298X HEWLETT-PACKARD COMPANY 11311 Chinden
More informationMATERIAL SAFETY DATA SHEET
Original Release Date: 03-10-05 Issue: 2 Revised Date: 9/21/11 Section I - Company / Product Identity Product Identification: CANON FX-7 BSN38691 TN1295 Company : Turbon USA, Inc. 4350 Haddonfield Rd.
More informationHEWLETT-PACKARD COMPANY Chinden Blvd. Boise, ID 83714
Material Safety Data Sheet 1.0 Preparation and company identity Identification of the preparation Company identification Telephone number HP Laser Jet Cartridge C4096A HEWLETT-PACKARD COMPANY 11311 Chinden
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET CE Item #DPS00FX6 NAME OF PRODUCT: MSDS Rev. DATE: June 26, 2007 SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Toner Cartridge SYNONYMS: PRODUCT CODES: MANUFACTURER:
More informationAbrasive Supply Company, Inc.
Page 1 of 6 1. Product and Company Identification Trade Name: Polyblast Melamine (Type III), Plastic Media (Type MF) Synonym: Melamine Blasting Media, Thermoset Melamine Recommended Use: Primarily used
More informationManufacturer/Supplier: NexPress Solutions LLC, Rochester, New York 14653
MATERIAL SAFETY DATA SHEET 000000321/F/USA Approval Date: 09/09/1999 Print Date: 12/01/2000 Page 1 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: CANON NP9120 Black Toner Catalog Number(s):
More informationMATERIAL SAFETY DATA SHEET
Original Release Date: 6-10-11 Issue: 1 Revised Date: Section I - Company / Product Identity Product Identification: HP -2055 X IBM TG85P7009 Company : Turbon USA Inc HMIS Hazard Rating: 0 = Minimal 3
More informationSAFETY DATA SHEET Vitrified Grinding Wheels SDS #3
SAFETY DATA SHEET SDS #3 1. IDENTIFICATION Product Identity / Trade Name:, Including Surface Grinding Wheels (Type 1) and Mounted Points. Product Use: Restriction on Use: Manufacturer: Internet: Abrasive
More informationSECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE
Revised 06/09/98 Lexmark International, Inc. 740 New Circle Rd. NW Lexington, Kentucky 40550-1876 Information: 1-606-232-3000 Emergency: 1-606-232-3333 Lexmark has determined that Material Safety Data
More informationCHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Imation Enterprises Corp. 1 Imation Place Oakdale, Minnesota 55128-3414 1-888-466-3456 For Medical Emergencies call: 1-800-328-5274 For Transport/Spill Emergencies call: Chemtrec 1-800-424-9300 (USA) or
More informationMATERIAL SAFETY DATA SHEET Beta Titanium SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING Product Name: β III -CNA Wire Manufacturer: Address Ultimate Wireforms, Inc. 200 Central Street Bristol, CT 06010 USA
More informationMATERIAL SAFETY DATA SHEET Copper(II) Chloride Anhydrous
MATERIAL SAFETY DATA SHEET Copper(II) Chloride Anhydrous Section 1 - Chemical Product and Company Identification MSDS Name : Copper(II) Chloride Synonym : Cupric Chloride Anhydrous Company Identification
More informationSECTION 2 - GENERAL COMPOSITION OF TONER CONTAINED IN CARTRIDGE. COMPONENT PERCENT CAS# OSHA PEL ACGIH TLV (wt.)
TOSHIBA MATERIAL SAFETY DATA SHEET TOSHIBA e-studio 220P Print Cartridge Revised date: 4/24/03 Toshiba has determined that Material Safety Data Sheets are not required for print cartridges. For customer
More informationSAFETY DATA SHEET. Section 1 Identification. Section 2. Hazard Identification. Section 3. Composition / Information On Ingredients
SAFETY DATA SHEET Product Name: Cal-CM Plus Mini Prilled Limestone Recommended use: Soil Enhancer Not Recommended: Use only as directed. Manufacturer: Art Wilson Company P.O. Box 20160 Carson City, NV
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Rev. Jan. 2012 Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION Trade Name: WOOD FLOUR / SHAVINGS Chemical Family: Lignocellulose Composition Materials Co., 249 Pepes Farm Road,
More informationSoluble Concentrate (SC)
1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION Product Name Soluble Concentrate (SC) General Use Alkaline detergent for soluble support removal Manufacturer and Address Stratasys Inc. 14950 Martin Drive
More informationM A T E R I A L S A F E T Y D A T A S H E E T
Page 1 of 5 1. Product And Company Identification Supplier Manufacturer HENRY COMPANY HENRY COMPANY 909 N. Sepulveda Blvd., Suite 650 909 N. Sepulveda Blvd., Suite 650 El Segundo, CA 90245-2724 El Segundo,
More information: 639C Tire & Footprint Casting Plaster
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : 639C Tire & Footprint Casting Plaster : 639C; 639C1 1.2. Relevant identified uses of the substance or mixture
More informationMaterial Safety Data Sheet Style DX Alltra 440 PTFE Sheet DXSeal, Inc. Revised: November 5, 2006
Section 1 Chemical Product and Company Identification Product Name: Product Use: Gasketing Product Manufacturer Information: P.O. Box 223 Vienna, OH 44473 (330) 856-4635 Emergency Contacts: Kathy Thomas
More informationSection 1 - Chemical Product and Company Identification. Section 2 - Composition, Information on Ingredients
Section 1 - Chemical Product and Company Identification Product Name : p-amino ANTIPYRINE Synonyms: 4-Aminoantipyrine;4-AAP;Metapirazone CAS No.: 83-07-8 Molecular Weight: 203.24 Chemical Formula: C 11
More informationMATHESIVE 202 Adhesive November 3, 2015 ***SAFETY DATA SHEET *** Page 1 of 5
Page 1 of 5 1. PRODUCT & COMPANY IDENTIFICATION Product Name: MATHESIVE 202 Product Type: Adhesive Company Address: The Gluefast Company, Inc. 3535 Route 66, Bldg. #1 Neptune, NJ 07753 USA Phone 732-918-4600
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1 - IDENTIFICATION OF SUBSTANCE & COMPANY PREPARING INFORMATION Identity: G5 Burgundy Manufacturer's Name: Minnesota Clay Address: 2960 Niagara Lane, Plymouth MN 55447
More informationSafety Data Sheet Vitrified Grinding Wheels
SAFETY DATA SHEET Vitrified Grinding Wheels Safety Data Sheet Vitrified Grinding Wheels 1. IDENTIFICATION Product Identifier: Vitrified Grinding Wheels, Including Surface Grinding Wheels (Type 1) and Mounted
More informationProduct Distributed by Rio Grande SDS access on web: Safety Data Sheet
Product Distributed by Rio Grande SDS access on web: www.riogrande.com Section 1: Identification of Product and Supplier Product Name: Synthetic Graphite Trade Name: Mersen Grade 2260 Recommended Use:
More informationPS 1823 Hot Melt November 3, 2015 ***SAFETY DATA SHEET *** Page 1 of 5
Page 1 of 5 1. PRODUCT & COMPANY IDENTIFICATION Product Name: PS 1823 Product Type: Hot Melt Adhesive Company Address: The Gluefast Company, Inc. 3535 Route 66, Bldg. #1 Neptune, NJ 07753 USA Phone 732-918-4600
More informationMATERIAL SAFETY DATA SHEET Nickel Titanium SECTION 5 FIRE FIGHTING PROCEDURES SECTION 6 ACCIDENTAL RELEASE MEASURES SECTION 7 HANDLING AND STORAGE
SECTION 5 FIRE FIGHTING PROCEDURES Extinguishing Media: This material is not combustible in solid form. Use media that is appropriate for the surrounding fire. For fires involving fine dust or filings,
More informationMaterial Safety Data Sheet
Material Safety Data Sheet Titanium Carbide Issue Date: 01/02/11 SECTION 1: IDENTIFICATION Product Name: Titanium Carbide Synonyms: Titanium Carbide, TiC Titanium Carbide Powder Refractory Metal Carbide
More informationMaterial Safety Data Sheet CHEMICAL PRODUCT & COMPANY IDENTIFICATION
1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION Product Name P400 Soluble Support Common Name ABS_SS General Use ABS soluble support filament for Stratasys Inc. FDM modeler Manufacturer and Address Stratasys
More information: FMP02 DAZZLE Orange Fluorescent Magnetic Latent Powder
FMP02 DAZZLE Orange Fluorescent Magnetic Latent Powder SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : FMP02 DAZZLE Orange Fluorescent Magnetic Latent Powder
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Product Trade Name: Revision Date: 01-Aug-2011 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Trade Name: Synonyms: Chemical Family: Application: Manufacturer/Supplier
More informationVersion /27/2006
1. PRODUCT AND COMPANY INFORMATION Company : BASF Building Systems, Inc. 889 Valley Park Drive Shakopee, MN 55379 Telephone : 952-496-6000 Emergency telephone number : (800) 424-9300 (703) 527-3887 (Outside
More informationNAME: PROPYLENE GLYCOL, NF SDS NO. 2327
Revised: 5/23/16 SAFETY DATA SHEET Page 1 of 5 Humco Holding Group, Inc. 7400 Alumax Dr Texarkana TX 75501 USA 800-662-3435 cs@humco.com www.humco.com 24-Hour Emergency Number (CHEMTREC) USA- 800-424-9300
More informationMATERIAL SAFETY DATA SHEET
Original Release Date: 11-24-10 Issue: 3 Revised Date: 11-24-10 Section I - Company / Product Identity Product Identification: Replacement cartridge for HP LaserJet 2400 series. Replaces HP Q6511A IBM
More informationREVISION DATE: 09/22/2010 SUPERCEDES: 09/22/2008. MSDS Number:
FOR ANY EMERGENCY, 24 HOURS / 7 DAYS, CALL: FOR ALL TRANSPORTATION ACCIDENTS, CALL CHEMTREC : FOR ALL MSDS QUESTIONS & REQUESTS, CALL: 1-800-654-6911 (OUTSIDE USA: 1-423-780-2970) 1-800-424-9300 (OUTSIDE
More informationSturbridge Metallurgical Rev Date: Jan 2016
Section 1: CHEMICAL PRODUCT AND COMPANY INDENTIFICATION Product Name: ASTM E407-94, 95 Kallings Etchant(s) Part Number: ASTM94 or ASTM95 (all sizes) Relevant Use: Industrial use / Metal testing reagent
More informationMATERIAL SAFETY DATA SHEET. EP85 - ( color C - replacement cartridge for HP LaserJet 4600 / 4610 / 4650 A )
Original Release Date: 01-05-06 Issue: 1 Revised Date: Section I - Company / Product Identity Product Identification: EP85 - ( color C - replacement cartridge for HP LaserJet 4600 / 4610 / 4650 A ) TG95P6486
More informationMATERIAL SAFETY DATA SHEET ABC Fire Extinguisher. SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Powder Fire Extinguisher
MATERIAL SAFETY DATA SHEET ABC Fire Extinguisher SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: 22185 Powder Fire Extinguisher APPLICATIONS: Fire Extinguisher SUPPLIER: Draper Tools Ltd Hursley
More informationSECTION 2 - GENERAL COMPOSITION OF INKS CONTAINED IN CARTRIDGE
Revised Date: 07/10/00 Lexmark International, Inc. 740 West New Circle Rd. Lexington, Kentucky 40550-1876 Information: 1-859-232-3000 Emergency: 1-859-232-3333 Lexmark has determined that Material Safety
More informationSafety Data Sheet. GHS Classification This product is not subject to hazardous classification
Safety Data Sheet Section 1: Chemical Identification Chemical Name: CAPS Alternate Name: 3-(cyclohexylamino)propane-1-sulfonic acid Catalog Number: C-040-1; C-040-50; C-040-250; C-040-500 Recommended This
More informationMATERIAL SAFETY DATA SHEET
Original Release Date: 01-11-07 Issue: 1 Revised Date: Section I - Company / Product Identity Product Identification: HP LJ P2015A Grade-IBM TG85P7001 Company : TONERFILL ROMANIA S.R.L. 1 Decembrie 1918
More informationSoluble Concentrate (SC)
1. CHEMICAL PRODUCT & COMPANY IDENTIFICATION Product Name General Use Manufacturer and Address Emergency Telephone Number Soluble Concentrate (SC) Alkaline detergent for soluble support removal Stratasys.
More informationEmergency Overview: A hazy liquid which cause mild irritation to the skin eyes. Not flammable
Safety Data Sheet 1. Product and Company Identification Product Name Other Product Name(s) Product Use Manufacturer Emergency Telephone Number Laminate & Vinyl Floor Cleaner MSC-050 Floor Cleaner Miracle
More informationStarch, Potato, Soluble, Powder, ACS
Safety Data Sheet Starch, Potato, Soluble, Powder, ACS 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Starch, Potato, Soluble, Powder, ACS Synonyms/Generic Names: Starch Product Number: 5525 Product
More informationHARRIS HOME PEST CONTROL
Section 1: IDENTIFICATION Product Name: Home pest control Product code/id: HPC-32;HPC-128 EPA Reg. No. 3-11 Recommended use: Pest control Manufacturer/Marketer: PF Harris Manufacturing Co., LLC 7 River
More informationTPM16440 White. HEAT STABILITY TPM16440 is designed for maximum processing temperatures of 600 F (315 C).
Technical Bulletin White is a white designed for polyethylene films including very thin gauges. It can also be used for blow molding and injection molding. can be used with all polyolefin resins. PHYSICAL
More informationZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification
ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification Manufacture/Supplier : Anti-Seize Technology 2345 N. 17 th Ave. Franklin Park, IL 60131
More informationSAFETY DATA SHEET SSP550-70
SECTION 1: IDENTIFICATION PRODUCT IDENTIFIER: OTHER MEANS OF IDENTIFICATION: SILVER ALUMINUM FILLED FLUOROSILICONE RECOMMENDED USE: RESTRICTIONS ON USE: CONDUCTIVE ELASTOMER, EMI SHIELDING MANUFACTURED
More information1. Product And Company Identification
1. Product And Company Identification Product Name: Armor All Multi-Purpose Auto Cleaner Spray Responsible Party: Information Phone Number: +1 203-205-2900 Emergency Phone Number: For Medical Emergencies,
More informationCalcium Carbonate Precipitated Lite Powder USP/FCC
Safety Data Sheet Calcium Carbonate Precipitated Lite Powder USP/FCC 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Calcium Carbonate Precipitated Lite Powder USP/FCC Synonyms/Generic Names: None
More informationCalcium Carbonate Precipitated Lite Powder USP/FCC
Safety Data Sheet Calcium Carbonate Precipitated Lite Powder USP/FCC 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Calcium Carbonate Precipitated Lite Powder USP/FCC Synonyms/Generic Names: None
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION Identification of the preparation Product use Version No. 05 Revision date Company identification 2. HAZARDS IDENTIFICATION Acute health
More informationSAFETY DATA SHEET. INHALATION RISKS AND SYMPTOMS OF EXPOSURE: Not toxic according to Federal Hazardous Substance and Labeling Definition Act.
Apex Page 1 SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identification Product Name: Apex Product Number: 15350 Product Use: Laundry Starch Company Identification Faultless
More informationPage 1 / 7 Safety Data Sheet. Toner - Black. Issuing Date Revision Date Version 2.01
Page 1 / 7 Safety Data Sheet SDS # : A-10010 Issuing Date 2011-06-03 Revision Date 2015-06-11 Version 2.01 Active 1. Product and Company Identification Trade Name Toner for WorkCentre 5325, WorkCentre
More informationPage 1 / 7 Safety Data Sheet. Toner - Black. Issuing Date Revision Date Version 1
Page 1 / 7 Safety Data Sheet SDS # : A-10151 Issuing Date 2016-05-04 Revision Date 2017-04-24 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION Part no. 006R01415, 006R01417, 006R01418, 006R01420, 006R01421,
More informationResinoid Bonded Abrasives (08/12)
1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT IDENTITY: GRINDING AND CUTTING WHEELS FOR METALS, CONCRETE AND BULDING MATERIALS. MANUFACTURER : KASCO ABRASIVES 580 RACE ST COLDWATER, Ml 49036 2. HAZARDS
More informationSAFETY DATA SHEET. Section 1 Chemical Product and Company Identification
SAFETY DATA SHEET Section 1 Chemical Product and Company Identification Product/Chemical Name: Aviation Metal Polish General Use: Aviation Metal Polish Manufacturer: Detailer Supply Inc Bldg 85-214 Bradley
More informationCLEAR-EX PILL. Manufacturer/Supplier Canadian Energy Services, Suite 1400, 700-4th Ave SW, Calgary, AB, T2P 3J4, Canadian Identifier
Safety Data Sheet SECTION 1. IDENTIFICATION Product Identifier Recommended Use Drilling Mud Additive. Manufacturer/Supplier Canadian Energy Services, Suite 1400, 700-4th Ave SW, Calgary, AB, T2P 3J4, Canadian
More informationSolid Ink - Black, Cyan, Magenta, Yellow
Page 1 / 6 Safety Data Sheet SDS # : S-00002 Solid Ink - Black, Cyan, Magenta, Yellow Issuing Date 2011-12-07 Revision Date 2016-04-06 Version 1 1. Product and Company Identification Trade Name Solid Ink
More informationToner Cartridge -Black
Page 1 / 7 Safety Data Sheet SDS # : A-35 Issuing Date 2003-01-27 Revision Date 2017-04-11 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION Part no. 106R02145, 006R00933 Active Trade Name Toner Cartridge
More informationMATERIAL SAFETY DATA SHEET (According to ANSI Z )
Page 1 of 5 pages PRODUCT NAME: MATERIAL SAFETY DATA SHEET (According to ANSI Z400.1-2004) Previous Issue: July 13, 2009 1. IDENTIFICATION OF PRODUCT AND COMPANY Product Name: Company: A-DEVELOPER POWDER
More informationMaterial Safety Data Sheet Sodium Acetate Trihydrate
Material Safety Data Sheet Sodium Acetate Trihydrate Section 1 - Chemical Product and Company Identification MSDS Name: Sodium Acetate Trihydrate Synonyms: Acetic acid, sodium salt, trihydrate. Section
More informationIron. Iron Iron. 8:32:46 AM] SAFETY DATA SHEET
SAFETY DATA SHEET 1 PRODUCT AND SUPPLIER IDENTIFICATION Product Name: Formula: - foil, sheet, rod, wire, target, shot, pieces, flake Fe Supplier: ESPI Metals 1050 Benson Way Ashland, OR 97520 Telephone:
More informationSAFETY DATA SHEET. ERSystems Fabric Faced Butyl Tape. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS ITW Polymers Sealants North America
Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS ITW Polymers Sealants North America CHEMTREC (US Transportation): (800) 424-9300 6900 Bleck
More informationEMERGENCY OVERVIEW Dust may cause eye and respiratory irritation. Dust particles may cause abrasive injury to the eyes.
Safety Data Sheet Date Issued - 06/8/2018 SDS Number - PB-03 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT DESCRIPTION: GENERAL USE: Material removal, surface finishing MANUFACTURER ADDRESS: Osborn 2350
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET SECTION 1: CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT: RS-200-CK Cement (Grip Cement Powder) November 17, 2005 Vishay Micro-Measurements Post Office Box 27777 Raleigh,
More information1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING
SAFETY DATA SHEET Issuing Date 29 May-2015 Revision Date 29 May-2015 ECR# 23583 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING GHS product identifier Product Name Etch n Seal
More informationSafety Data Sheet Page 1 of 6 Hot Shot MaxAttrax Ant Bait 2 Revision date: 3/22/2016
Safety Data Sheet Page 1 of 6 Section 1 - Product and Company Identification Product Identifiers: Product Name: Hot Shot MaxAttrax Ant Bait 2 EPA Registration Number: 9688-214-8845 Product Use: Insecticide
More informationCalcium Carbonate Powder
Safety Data Sheet Calcium Carbonate Powder 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Calcium Carbonate Powder Synonyms/Generic Names: None Product Number: 1008 Product Use: Industrial, Manufacturing
More informationSAFETY DATA SHEET Rainguard Advanced Tinted Waterproofer TPC 0117, 0113, 0114, Surveyor Circle Huntington Beach, CA 92646
SECTION 1 IDENTIFICATION MANUFACTURER: Weatherman Products, Inc 21622 Surveyor Circle Huntington Beach, CA 92646 United States of America PHONE: (949) 515 8800 (866)989 5159 EMAIL: info@rainguard.com WEB
More informationToner Cartridge-Black
Page 1 / 7 Safety Data Sheet SDS # : A-0600 Issuing Date 1996-06-25 Revision Date 2015-02-26 Version 2 1. Product and Company Identification Part no. 113R00119, 113R00120, 113R00121, 113R00122, 113R00153,
More informationTitanium. Titanium Titanium. 8:27:20 AM]
SAFETY DATA SHEET 1 PRODUCT AND SUPPLIER IDENTIFICATION Product Name: Formula: - pellets, wire, rod, foil, sheet, target Ti Supplier: ESPI Metals 1050 Benson Way Ashland, OR 97520 Telephone: 800-638-2581
More informationFLEXOVIT USA INC. SAFETY DATA SHEET. SECTION 1 Identification of the Product and Company. SECTION 2 Hazard Information. SECTION 3 Composition.
FLEXOVIT USA INC. SAFETY DATA SHEET SECTION 1 Identification of the Product and Company 1.1 Product Name : Power Brushes with Carbon Steel Wire 1.2 Product use: material removal, surface finishing see
More information2602 FLORIDA PURPLE PEC
Page 1 of 7 1. PRODUCT AND COMPANY IDENTIFICATION POLYONE CORPORATION 33587 Walker Road, Avon Lake, OH 44012 NON-EMERGENCY TELEPHONE Emergency telephone number : Product Stewardship (770) 271-5902 : CHEMTREC
More informationSECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification
Date of issue: Supersedes: 03/02/2015 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : Mixture : (TFC-400) 1.2. Relevant
More informationMaterial Safety Data Sheet
1 Identification of Substance Bismuth Nanoparticles (Bi) US Research Nanomaterials, Inc. Material Safety Data Sheet acc. to OSHA and ANSI Trade name: Bismuth powder Stock number: US1053 Manufacturer/Supplier:
More informationMATERIAL SAFETY DATA SHEET
Page 2 of 6 SECTION 4 FIRST AID MEASURES First Aid Measures: Inhalation: If symptoms are experienced, move victim to fresh air and obtain medical advice. Ingestion: Rinse mouth. Drink 1 or 2 glasses of
More informationSAFETY DATA SHEET. Revision Date 23-Jan-2018 Revision Number Identification
SAFETY DATA SHEET Revision Number 3 Product Name Cat No. : Synonyms Recommended Use Uses advised against 1. Identification D-Gluconic acid, zinc salt hydrate AC392010000; AC392011000; AC392015000 Zinc
More informationSafety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)
Safety Data Sheet Charcoal, Activated, Powder, Darco G60 1. PRODUCT AND COMPANY IDENTIFICATION Product Name: Charcoal, Activated, Powder, Darco G60 Synonyms/Generic Names: Product Number: 1340 Product
More informationSafety Data Sheet. Crafter s Choice Dulce de Leche - Sweetened Flavor Oil
1. Identification Product Name: Recommended Use: Supplied by: In Case of Emergency: Flavor Crafter s Choice Brands, LLC ChemTel (MIS3548100) (800) 255-3924 Domestic USA, Canada, Puerto Rico and USVI +1
More informationIssue Date: 26-Sep-2011 Revision Date: 08-Sep-2014 Version 1 1. IDENTIFICATION. Liquid Cleaning Compound. 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 26-Sep-2011 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Product Code Bio Blast CARROLL-146 N17 Recommended use of the chemical
More informationMATERIAL SAFETY DATA SHEET SYnL-1 November 3, 2005
CLAY MINERALS SOCIETY SAFETY DATA SHEET 1. Product and Company Information Manufacturer: Clay Minerals Society Source Clays Repository P.O.Box 460130, Aurora, Colorado 80046-0130 USA. Web: http://www.clays.org
More informationSAFETY DATA SHEET. Protective Clothing OSHA Classification WHMIS (Canada) Transport
Page 1 of 5 Section 1: Product and Company Identification Product Name: Product Code: Product Use: TYRE MARQUE 51420 White, 51421 Yellow, 51422 Red, 51425 Blue For marking on rubber Supplier: LA-CO Industries,
More informationMaterial Safety Data Sheet
Page 1/5 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 1) Product Name:, GRADE: 2) Company Identification 1 Prepared by: Honam Petrochemical Corp. Yeosu Plant 2 Address: 172 Chungheung-dong, Yeosu,
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Product Trade Name: Revision Date: 02-Jan-2007 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Trade Name: Synonyms: Chemical Family: Application: Manufacturer/Supplier
More informationPRODUCT CAS NUMBER % BY WEIGHT 3-Amino-4-methoxybenzanilide %
Section 1 Company Information Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899 parchem.com info@parchem.com EMERGENCY RESPONSE NUMBER: CHEMTEL
More informationRevision Number: Issue date: 03/12/ PRODUCT AND COMPANY IDENTIFICATION. IDH number: HAZARDS IDENTIFICATION PICTOGRAM(S) None
Safety Data Sheet Revision Number: 002.0 Issue date: 03/12/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name: TECHNOMELT PA 7802 HOT MELT ADHESIVE known as HYSOL 7802 POLYSHOT Product type: Hotmelt
More informationPage 1 / 7 Safety Data Sheet. Developer-Clear. Issuing Date Revision Date Version 1 Active
Page 1 / 7 Safety Data Sheet SDS # : B-2042 Issuing Date 2010-01-22 Revision Date 2015-03-12 Version 1 Active 1. Product and Company Identification Trade Name Developer for Xerox Color 1000 Press, Xerox
More informationSAFETY DATA SHEET. Page 1 of 5
Page 1 of 5 1. IDENTIFICATION (a) Product Identifier: Structural Glazed Brick and Tile (b) Other means of identification: (c) Recommended Use: Structural walls and wall coverings (d) Manufacturer: Elgin
More information*MATERIAL SAFETY DATA SHEET*
*MATERIAL SAFETY DATA SHEET* MSDS DATE: 1/01/2015 SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: McKesson Premium Instant Hand Sanitizer w/ Aloe MFR #: 53-27039-2, 53-27032-4, 53-27033-8,
More information: BPM115L Magnetic Latent Print Powder, Midnight Black
BPM115L Magnetic Latent Print Powder, Midnight Black SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : BPM115L Magnetic Latent Print Powder, Midnight Black
More informationSDS Number: FLUENCY AGENT SDS Version 1.0
Revision Date: 12/16/2013 Print Date: 12/16/2013 SECTION 1. CHEMICAL PRODUCT AND COMPANY INFORMATION Product name FLUENCY AGENT SDS Number 102000017992 Product code (UVP) 79131054 Product Use Seed flow
More informationSAFETY DATA SHEET Non-woven Products SDS #8/9
SAFETY DATA SHEET SDS #8/9 1. IDENTIFICATION Product Identity / Trade Name: (Nylon Brushes and Surface Cleaning Belts and Discs) Product Use: Restriction on Use: Manufacturer: Internet: Abrasive materials
More information