ENVIRONMENTAL PRODUCT DECLARATION

Transcription

1 ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: Publisher: Declaration number: Registration number: ECO Platform reference number: Issue date: Valid to: Finja AB The Norwegian EPD Foundation The Norwegian EPD Foundation NE EN NE EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation Finja Betong AB Only a picture or corresponding graphics shall be inserted showing the product or the use of the product. NB! Images must be high resolution (clear and sharp) with dimensions 22cm x 21 cm. NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 1/8

2 General information Product: Blokk Exakt, Lightweight Concrete Block with EPS-insulation Owner of the declaration: Finja Betong AB Contact person: Lena Almestrand Phone: Lena.Almestrand@finja.se Program operator: The Norwegian EPD Foundation Manufacturer: Finja Betong AB Post Box 525 Majorstuen, 33 Oslo Betongvägen 1, S Finja Phone: Phone: post@epd-norge.no info@finja.se Declaration number: NE EN Place of production: Strängnäs, Sweden ECO Platform reference number: Management system: ISO 141 This declaration is based on Product Category Rules: CEN Standard EN 1584 serves as core PCR Organisation no: Statement of liability: The owner of the declaration shall be liable for the underlying information and evidence. EPD Norway shall not be liable with respect to manufacturer-information, life cycle assessment data and evidences. Issue date: Valid to: Declared unit: 1 block part and 1 EPS insulation part. Whith support from table on page 8 can the impact from A1-3 be calulated for any induvidual Exakt Blokk. Declared unit with option: A1-A4 Year of study: 217 Comparability: EPD of construction products may not be comparable if they not comply with EN 1584 and seen in a building context. Functional unit: The EPD has been worked out by: Ulf Liljenroth Verification: The CEN Norm EN 1584 serves as the core PCR. Independent verification of the declaration and data, according to ISO1425:21 internal Third party verifier: external Approved Martin Erlandsson, IVL Swedish Environmental Research Inst. (Independent verifier approved by EPD Norway) NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 2/8

3 Product Product description: Exact insulated blocks have extra insulation, are light in weight and are manufactured with great precision. The strong adhesive joint between the cellular plastic and the light clinker gives the block great strength. The grey cellular plastic together with the light clinker provide exceptional U values. Available in widths 25*, 29, 35 and 4 mm. *Exakt 25 mm insulated blocks are only sold on the Swedish market. Product specification: The composition of the product is described in the table below Technical data: Walling block for walls and pillars in accordance with SS-EN For further information see Market: Nordic countries Reference service life, Same as for the wall it is part of Materials % concrete part % EPS part Cement 16 EPS Glue 1 1 Leca aggregate 43 Gravel 26 Water 14 Packaging <1 LCA: Calculation rules Declared unit: One Blokk Exakt where the impact A1-3 for the lightweight concrete block and EPS-insulation part are reported separately. These two tables need to be combined to get result for a complete block, based on information given in the table on page 8. System boundary: All processes from raw material extraction to product from the factory gate are included in the analysis (A1-A3). In addition, transportation to a central warehouse placed in accordance with guidelines issued by the EPD Norway (A4) is included. Flow Chart Data quality: Materials Data quality Source Year Cement Specific EPD EPD-HCG CAA1-EN 214 EPS Specific EPD EPS. EPD-EUM IBG1-EN 213 Glue Industry data Ecoinvent v3.3 Leca aggregate Specific EPD NEPD 12E 213 Gravel Industry data Ecoinvent v3.3 Water Industry data Ecoinvent v3.3 Packaging Industry data Ecoinvent v3.3 Allocation: The allocation is made in accordance with the provisions of EN Incoming energy and water and waste production inhouse is allocated equally among all products through mass allocation. Effects of primary production of recycled materials allocated to the main product in which the material was used. Cut-off criteria: All major raw materials and all the essential energy is included. The production process for raw materials and energy flows that are included with very small amounts (<,2%) are not included (except packaging). This cut-off rule does not apply for hazardous materials and substances. NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 3/8

4 LCA: Scenarios and additional technical information The following information describe the scenarios in the different modules of the EPD. Products are transported from manufacturing unit in Strängnäs to warehouse in Oslo. from production place to user (A4) per product Type Type of vehicle Capacity utilisation (incl. return) % Distance km Fuel/Energy consumption, l/tkm Value (l/t) Truck (5% biodiesel) 85% Lorry LCA: Results for concrete block part System boundaries (X=included, = module not declared, MNR=module not relevant) Product stage Assemby stage Use stage End of life stage Beyond the system boundaries Raw materials Manufacturing Assembly Use Maintenance Repair Replacement Refurbishment Operational energy use Operational water use De-construction demolition Waste processing Disposal Reuse-Recovery-Recyclingpotential A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D X X X X Environmental impact Parameter Unit/ block part A1 A2 A3 A1-A3 A4 GWP* CO 2 -eqv 2.45E E-2 ODP CFC11-eqv 2.91E E-9 POCP C 2 H 4 -eqv 7.1E E-6 AP SO 2 -eqv 7.12E E-4 EP PO 3-4 -eqv 5.56E-4 6.7E-5 ADPM Sb-eqv 4.3E-7 ADPE 2.5E+ 6.84E-1 * Emission and uptake of biogenic carbon as CO 2 is not accounted for as in accordance to EN GWP Global warming potential; ODP Depletion potential of the stratospheric ozone layer; POCP Formation potential of tropospheric photochemical oxidants; AP Acidification potential of land and water; EP Eutrophication potential; ADPM Abiotic depletion potential for non fossil resources; ADPE Abiotic depletion potential for fossil resources NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 4/8

5 Resource use Parameter Unit/ block part RPEE RPEM TPE NRPE NRPM TRPE SM RSF NRSF W m 3 A1 A2 A3 A1-A3 4.6E-1 4.6E E+ 4.81E E+ 1.98E E E E-2 A4 9.24E E E E-1 4.E-3 RPEE Renewable primary energy resources used as energy carrier; RPEM Renewable primary energy resources used as raw materials; TPE Total use of renewable primary energy resources; NRPE Non renewable primary energy resources used as energy carrier; NRPM Non renewable primary energy resources used as materials; TRPE Total use of non renewable primary energy resources; SM Use of secondary materials; RSF Use of renewable secondary fuels; NRSF Use of non renewable secondary fuels; W Use of net fresh water End of life - Waste Parameter HW NHW RW Unit/ block part A1 A2 A3 A1- A3 A4 1.69E E-2 2.7E-5 HW Hazardous waste disposed; NHW Non hazardous waste disposed; RW Radioactive waste disposed End of life - Output flow Parameter CR MR MER EEE ETE Unit/ block part A1 A2 A3 A1- A3 9.9E-5 A4 CR Components for reuse; MR Materials for recycling; MER Materials for energy recovery; EEE Exported electric energy; ETE Exported thermal energy Reading example: 9, E-3 = 9,*1-3 =,9 NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 5/8

6 LCA: Results for EPS insulation part System boundaries (X=included, = module not declared, MNR=module not relevant) Product stage Assemby stage Use stage End of life stage Beyond the system boundaries Raw materials Manufacturing Assembly Use Maintenance Repair Replacement Refurbishment Operational energy use Operational water use De-construction demolition Waste processing Disposal Reuse-Recovery-Recyclingpotential A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D X X X X Environmental impact Parameter Unit/ EPS A1 A2 A3 A1-A3 A4 GWP* CO 2 -eqv 3.21E+ 2.41E-2 ODP CFC11-eqv 2.1E E-9 POCP C 2 H 4 -eqv 1.31E E-6 AP SO 2 -eqv 8.18E E-4 EP PO 3-4 -eqv 8.E-4 6.7E-5 ADPM Sb-eqv 1.55E-6 ADPE 8.89E E-1 * Emission and uptake of biogenic carbon as CO 2 is not accounted for as in accordance to EN GWP Global warming potential; ODP Depletion potential of the stratospheric ozone layer; POCP Formation potential of tropospheric photochemical oxidants; AP Acidification potential of land and water; EP Eutrophication potential; ADPM Abiotic depletion potential for non fossil resources; ADPE Abiotic depletion potential for fossil resources NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 6/8

7 Resource use Parameter Unit/ EPS A1 A2 A3 A1-A3 A4 RPEE 1.86E+ 9.24E-3 RPEM 3.2E-2 TPE 1.89E+ 9.24E-3 NRPE 5.3E E-1 NRPM 4.6E+1 TRPE 9.9E E-1 SM RSF NRSF W m E-2 4.E-3 RPEE Renewable primary energy resources used as energy carrier; RPEM Renewable primary energy resources used as raw materials; TPE Total use of renewable primary energy resources; NRPE Non renewable primary energy resources used as energy carrier; NRPM Non renewable primary energy resources used as materials; TRPE Total use of non renewable primary energy resources; SM Use of secondary materials; RSF Use of renewable secondary fuels; NRSF Use of non renewable secondary fuels; W Use of net fresh water End of life - Waste Parameter Unit/ EPS A1 A2 A3 A1- A3 A4 HW 9.53E-4 NHW 4.26E-2 RW 7.87E-4 HW Hazardous waste disposed; NHW Non hazardous waste disposed; RW Radioactive waste disposed End of life - Output flow Parameter Unit/ EPS A1 A2 A3 A1- A3 A4 CR MR MER EEE ETE CR Components for reuse; MR Materials for recycling; MER Materials for energy recovery; EEE Exported electric energy; ETE Exported thermal energy Reading example: 9, E-3 = 9,*1-3 =,9 NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 7/8

8 Key figures to define the impact for different blocks In order to calculate environmental impact for different blocks use the following table with weight information. Additional Norwegian requirements Greenhous gas emission from the use of electricity in the manufacturing phase Electricity use in production is based on consumption figures for 216. Emission data is taken from Ecoinvent 3.3 Electricity, medium voltage {SE} market for Alloc Rec, S (216). Data source Amount Unit Econinvent v3.3 (216) 48 gram CO 2 -eqv/kwh Dangerous substances The product contains no substances given by the REACH Candidate list or the Norwegian priority list The product contains substances given by the REACH Candidate list or the Norwegian priority list that are less than,1 % by weight. The product contain dangerous substances, more then,1% by weight, given by the REACH Candidate List or the Norwegian Priority list, see table. The product contains no substances given by the REACH Candidate list or the Norwegian priority list. The product is classified as hazardous waste (Avfallsforskiften, Annex III), see table. Indoor environment The emission test is based on a representative Exakt Normal block product (35x197x6 mm) and meets the requirements for the recommended class in M1 (ammonia and odour not measured) and Emicode EC1 PLUS. EMICODE EC1 PLUS includes the strongest requirements on low VOC emissions compared to EMICODE EC1 and Blue Angel, AgBB, DIBt and California (Section 135). The product has no detectable impact on the indoor environment. Carbon footprint Carbon footprint has not been worked out for the product. Bibliography ISO 1425:21 ISO 1444:26 EN 1584:212+A1:213 ISO 2193:27 Environmental labels and declarations - Type III environmental declarations - Principles and procedures Environmental management - Life cycle assessment - Requirements and guidelines Sustainability of construction works - Environmental product declaration - Core rules for the product category of construction products Sustainability in building construction - Environmental declaration of building products LCI Report LCA Report Finja Lightweight concrete blocks. Ulf Liljenroth, WSP 217. Emicode EC1PLUS Publisher and program operator Phone: The Norwegian EPD Foundation Post Box 525 Majorstuen, 33 Oslo post@epd-norge.no Norway web Owner of the declaration Phone: Finja Betong AB Fax Betongvägen 1 info@finja.se S Finja web Author of the Life Cycle Assessment Phone: Ulf Liljenroth Fax Box ulf.liljenroth@wsp.com S Göteborg web NEPD EN Blokk Exakt, Lightweight Concrete Block with EPS-insulation 8/8