NAVSEA STANDARD ITEM NUMERICAL INDEX

Size: px
Start display at page:

Download "NAVSEA STANDARD ITEM NUMERICAL INDEX"

Transcription

1 NAVSEA STANDARD ITEM NUMERICAL INDEX FY-18(CH-2) ITEM NO General Criteria; Environmental Compliance Report for Material Usage at Naval Facility; Toxic and Hazardous Substance; control Quality Management System; Temporary Access; Maintaining Protection and Cleanliness from Non-Radioactive Operations; Confined Space Entry, Certification, Fire Prevention and Housekeeping; Shipboard Fire Protection and Fire Prevention; Process Control Procedure (PCP); and Asbestos-Containing Material (ACM); control Insulation and Lagging; Weld, Fabricate, and Inspect; I 07 MAR Meter; repair Gage, Switch, and Thermometer; repair Rotating Machinery; balance Electronic Equipment; repair 1 of 8 FY-18(CH-2)

2 Rotating Electrical Equipment; repair Magnetic Material; control I 07 MAR Provisioning Technical Documentation (PTD); I 30 JUL Government Property; control I 18 JUL Logistics and Technical Data; I 18 JUL Canceled 18 NOV Interference; remove and install Authorization, Control, Isolation, Blanking, Tagging and Cleanliness; Structural Boundary Test; I 01 OCT Deck Covering; II 07 MAR Material Identification and Control (MIC) for Level I System; Canceled 18 NOV Asbestos-Free Pipe Hanger Liner Material; install I 29 JUL Boiler Sample Tube; inspect Boiler Waterjet Cleaning; Cleaning and Painting Requirements; Rotating Electrical Equipment; rewind Fire Protection of Unmanned Vessel at Contractor Facility; II 18 JUL 2014 II 07 MAR 2017 II 01 OCT Canceled 18 NOV Controller; repair 2 of 8 FY-18(CH-2)

3 General Procedure for Woodwork; Boiler, Catapult Accumulator, and Reboiler Dry Lay-up; Technical Manual Contract Requirement (TMCR) for a New Technical Manual for Commercial Equipment/Component; Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; Technical Manual Contract Requirement (TMCR) for a Topically Structured Technical Manual; Technical Manual Contract Requirement (TMCR) for Updating Technical Manual; Engineering Plant Production Completion Date (PCD), Light-Off Assessment (LOA) Support; II 30 JUL Cancelled 18 JUL Tapered Plug Valve; repair Butterfly Valve, Synthetic and Metal Seated; repair II 18 JUL Gate Valve; repair Pressure Seal Bonnet Valve Shop Repair; Pressure Seal Bonnet Valve Inline Repair; Horizontal Swing Check Valve; repair Globe, Globe Angle, and Globe Stop Check Valve; repair Relief Valve; repair 3 of 8 FY-18(CH-2)

4 Bolted Bonnet Steam Valve Shop Repair; Bolted Bonnet Steam Valve In-line Repair; Regulating/Reducing Valve; repair Main Propulsion Boiler Wet Layup; Reduction Gear Security; Pump and Driver Shaft Alignment; Organotin Antifouling Material; control Schedule and Associated Reports for Availabilities Over 9 Weeks in Duration; and manage Shipboard Use of Fluorocarbons; control Boiler Handhole, Manhole Seat and Plate; inspect Lubricating Oil and Hydraulic Fluid; analyze Synthetic Fire Resistant Hydraulic Fluid; control Polychlorinated Biphenyls (PCBs); control Cancelled 18 JUL Integrated Total Ship Testing; manage II 01 SEP 2015 I 01 SEP 2015 I 18 JUL 2014 I 29 JUL Bolted Bonnet Valve; repair II 29 JUL Heavy Weather/Mooring Plan; Confined Space Entry, Certification, Fire Protection, Fire Prevention, and Housekeeping for Unmanned Vessel; 4 of 8 FY-18(CH-2)

5 Piping System; test Physical Security at a Private Contractor Facility; Shipboard Electrical/Electronic Cable Procedure; Occupational, Safety and Health Plan; I 01 OCT Circuit Breaker; repair Waveguide and Rigid Coaxial Lay- Up; Cofferdam Installation; Passive Countermeasures System (PCMS) Material; repair Government Owned Material (GOM) Status; report Ship Facilities; maintain Compartment Closeout; Installation of Equal Component Vice Specified Component; report Wire Rope Assembly; fabricate Threaded Fastener Requirements; Government Sponsored Planning Yard/Configuration Data Manager (CDM) On-Site Representative Facility; Recovery and Turn-In of Ozone Depleting Substance (ODS); Chemical Disinfection Procedure; II 19 JUL of 8 FY-18(CH-2)

6 Collection, Holding and Transfer (CHT) and Motor Gasoline(MOGAS) Tanks, Spaces, and Piping, including Sewage or MOGAS- Contaminated Tanks, Spaces, and Piping; certify Contractor Furnished Anode(Purchase and Inspection); Technical Representative; II 18 JUL Propeller In-Place Inspection; Resilient Mount; install Emergency Planning and Community Right-to-Know Act (EPCRA) and Pollution Prevention Act (PPA) Information; General Environmental Work at Contractor Facility; Mechanically Attached Fitting (MAFs); install Ball Valve; repair Shipbuilding and Ship Repair Operations National Emission Standard for Hazardous Air Pollutants (NESHAPS) for Surface Coating Information; I 17 JAN Canceled 18 NOV Ship Departure Report; I 18 JUL Ship's Stability; maintain Ship Transit and Berthing; Alteration Verification; I 29 JUL Weight and Moment Change Data; I 18 JUL Vibration Testing and Analysis; II 18 JUL of 8 FY-18(CH-2)

7 Thermal Sprayed Coating for Machinery Component Repair; Work Authorization Form Coordinator (WAFCOR); Piping System Cleanliness Restoration (Non-Nuclear); Aircraft Carrier Transit and Berthing; Non-SUBSAFE Work on SUBSAFE- Certified Vessel; Non-Nuclear Work on a Nuclear Vessel; Schedule and Associated Reports for Availabilities 9 Weeks or Less in Duration; and manage Prevention of Radiographic- Inspection Ionizing-Radiation Hazard; I 01 OCT Rotating Electrical Equipment with a Sealed Insulation System (SIS); rewind II 01 OCT Mold Remediation; II 07 NOV Bearing Rebabbitting; II 30 JUL Auxiliary and Waste Heat Boiler Sodium Nitrite Wet Lay-up; II 30 JUL Combat Systems Light-Off; support CG Deck Loading; I 18 JUL of 8 FY-18(CH-2)

8 Cancelled 18 JUL Fact Finding and Critique of Unplanned Event; manage Ship Assessment/Inspection; Temporary Padeye; install and remove Fiber Optic Component; remove, relocate, repair, and install 8 of 8 FY-18(CH-2)

ELEC / ELEX COMMITTEE Fiber Optic Component; remove, relocate, repair, and install Electronic Equipment; repair Rotating

ELEC / ELEX COMMITTEE Fiber Optic Component; remove, relocate, repair, and install Electronic Equipment; repair Rotating ELEC / ELEX COMMITTEE 009-123 Fiber Optic Component; remove, relocate, repair, and install 009-16 Electronic Equipment; repair 009-17 Rotating Electrical Equipment; repair 009-33 Rotating Electrical Equipment;

More information

Standard Specifications for Ship Repair and Alteration Committee SSRAC

Standard Specifications for Ship Repair and Alteration Committee SSRAC Standard Specifications for Ship Repair and Alteration Committee SSRAC History The Standard Specification for Ship Repair and Alteration Program (SSRAC) was established in 1970 to carry out the development,

More information

STANDARD PHRASEOLOGY SECTION A

STANDARD PHRASEOLOGY SECTION A STANDARD PHRASEOLOGY SECTION A 1. This section of standard phraseology contains the approved standard phrases to be used when invoking Category II Standard Items. The Standard Item number and title are

More information

NAVSEA STANDARD ITEM. 1.1 Title: Interference; remove and install LP , Submarine Safety (SUBSAFE) Requirements Manual

NAVSEA STANDARD ITEM. 1.1 Title: Interference; remove and install LP , Submarine Safety (SUBSAFE) Requirements Manual NAVSEA STANDARD ITEM ITEM NO: 009-23 DATE: 18 NOV 2016 CATEGORY: I 1. SCOPE: 1.1 Title: Interference; remove and install 2. REFERENCES: 2.1 Standard Items 2.2 0948-LP-045-7010, Material Control Standard

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM ITEM NO: 009-23 DATE: 17 JAN 2013 CATEGORY: I 1. SCOPE: 1.1 Title: Interferences; remove and install 2. REFERENCES: 2.1 Standard Items 2.2 0948-LP-045-7010, Material Control Standard

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM ITEM NO: 009-23 DATE: 17 JAN 2013 CATEGORY: I 1. SCOPE: 1.1 Title: Interferences; remove and install 2. REFERENCES: 2.1 Standard Items 2.2 0948-LP-045-7010, Material Control Standard

More information

NAVSEA STANDARD ITEM. 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish

NAVSEA STANDARD ITEM. 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish NAVSEA STANDARD ITEM ITEM NO: 009-06 DATE: 30 JUL 2015 CATEGORY: I 1. SCOPE: 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish 2. REFERENCES: 2.1 Standard Items

More information

NAVSEA STANDARD ITEM. 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish

NAVSEA STANDARD ITEM. 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish NAVSEA STANDARD ITEM ITEM NO: 009-06 DATE: 06 MAR 2018 CATEGORY: I 1. SCOPE: 1.1 Title: Maintaining Protection and Cleanliness from Non-Radioactive Operations; accomplish 2. REFERENCES: 2.1 Standard Items

More information

NAVSEA STANDARD ITEM. 1.1 Title: Authorization, Control, Isolation, Blanking, Tagging, and Cleanliness; accomplish

NAVSEA STANDARD ITEM. 1.1 Title: Authorization, Control, Isolation, Blanking, Tagging, and Cleanliness; accomplish NAVSEA STANDARD ITEM ITEM NO: 009-24 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Authorization, Control, Isolation, Blanking, Tagging, and Cleanliness; accomplish 2. REFERENCES: 2.1 Standard Items

More information

SKF marine solutions. Improving fleet efficiency and predictability in a sustainable way. The Power of Knowledge Engineering

SKF marine solutions. Improving fleet efficiency and predictability in a sustainable way. The Power of Knowledge Engineering SKF marine solutions Improving fleet efficiency and predictability in a sustainable way Working together to bring benefits throughout the ship life cycle In today s global fleet of increasingly specialized

More information

EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT

EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT EAST CENTRAL REGIONAL WATER RECLAMATION FACILITY PROCESS WATER SYSTEM PROJECT Addendum No. 2 Attachment B Contract Document Revisions Specifications: TABLE OF CONTENTS ADDENDUM NO. 2 Attachment B Contract

More information

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME).

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME). Issued 2005/06/01 Section 15112 Valves Cast Iron, Gate, Globe, Check Page 1 of 8 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards

More information

u m p a n d u m p i n g y s t e m p e c i a l i s t s i n c e

u m p a n d u m p i n g y s t e m p e c i a l i s t s i n c e P P S S S u m p a n d u m p i n g y s t e m p e c i a l i s t s i n c e 1 9 6 2 Ft Worth Waco Austin Houston San Antonio 2 3 Vertical Turbine Fabricated Steel Components Smith Pump specializes in engineered

More information

Environmental Requirement Review Checklist and Certification

Environmental Requirement Review Checklist and Certification Environmental Requirement Review Checklist and Certification All contractors are required to review the applicable requirements and submit this checklist to envreports@nassco.com A. Contractor Information

More information

HOT, CHILLED, AND CONDENSING WATER PIPING SPECIALTIES (HVAC)

HOT, CHILLED, AND CONDENSING WATER PIPING SPECIALTIES (HVAC) SECTION 15432 HOT, CHILLED, AND CONDENSING WATER PIPING SPECIALTIES (HVAC) PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15047 - Identification. 2. 15433 - HVAC Pumps. 3. 15555 - Horizontal Fire

More information

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION SECTION 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 - GENERAL 1.1 SUMMARY A. This section supplements all sections in this division, including pipe, fittings, valves, and connections for sprinkler

More information

Mechatronics Courses by School Period

Mechatronics Courses by School Period Mechatronics Courses by School Period Year One P1 P1 P2 P3 P3 P3 P4 P4 P4 Integrated Systems Industrial Math (Geometry, Trig, Algebra,) Blueprint Reading Machine Tool I (Hand tools-measuring-saws & Drill

More information

NOTE TO SPECIFYING ARCHITECT REGARDING SECTION CONTOUR CURTAIN AND MOTOR

NOTE TO SPECIFYING ARCHITECT REGARDING SECTION CONTOUR CURTAIN AND MOTOR NOTE TO SPECIFYING ARCHITECT REGARDING SECTION 11074 CONTOUR CURTAIN AND MOTOR 1. This curtain provides a beautiful scalloping Austrian appearance. 2. Contour curtain rises vertically forming a valance

More information

GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS

GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS - June 2013 Addendum GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION "A" : GENERAL RULES SUBSECTION "B" : CLASS 1 COMPONENTS SUBSECTION "C" : CLASS 2 COMPONENTS SUBSECTION "D" : CLASS

More information

Newport News Shipbuilding Contractor Environmental, Health and Safety Resource Manual Hazardous Energy Control

Newport News Shipbuilding Contractor Environmental, Health and Safety Resource Manual Hazardous Energy Control Newport News Shipbuilding Contractor Environmental, Health and Safety Resource Manual Hazardous Energy Control Newport News Shipbuilding Page 1 HAZARDOUS ENERGY CONTROL 1. Hazard a. Potentially hazardous

More information

SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS

SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS SERIES 0 BIDDING REQUIREMENTS AND CONTRACT FORMS INDIANA UNIVERSITY BIDDING REQUIREMENTS NOTICE TO BIDDERS BID FORM INSTRUCTIONS TO BIDDERS CONTRACTOR S BID FOR PUBLIC WORK - FORM 96 (REVISED 2005) MINORITY,

More information

NAVSEA STANDARD ITEM. 1.1 Title: Asbestos-Containing Material (ACM); control

NAVSEA STANDARD ITEM. 1.1 Title: Asbestos-Containing Material (ACM); control NAVSEA STANDARD ITEM ITEM NO: 009-10 DATE: 18 NOV 2016 CATEGORY: I 1. SCOPE: 1.1 Title: Asbestos-Containing Material (ACM); control 2. REFERENCES: 2.1 29 CFR 1915.1001, Occupational Safety and Health Standards

More information

NAVSEA STANDARD ITEM. 1.1 Title: Asbestos-Containing Material (ACM); control

NAVSEA STANDARD ITEM. 1.1 Title: Asbestos-Containing Material (ACM); control NAVSEA STANDARD ITEM ITEM NO: 009-10 DATE: 30 APR 2018 CATEGORY: I 1. SCOPE: 1.1 Title: Asbestos-Containing Material (ACM); control 2. REFERENCES: 2.1 29 CFR 1915.1001, Occupational Safety and Health Standards

More information

SPECIFICATIONS - DETAILED PROVISIONS Section Progressing Cavity Pump C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section Progressing Cavity Pump C O N T E N T S SPECIFICATIONS - DETAILED PROVISIONS Section 11938 - Progressing Cavity Pump C O N T E N T S PART 1 - GENERAL... 1 1.01 GENERAL... 1 1.02 RELATED SPECIFICATION SECTIONS... 1 1.03 MANUFACTURERS... 1 PART

More information

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME) Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National

More information

Technical Summary. 1. Purpose

Technical Summary. 1. Purpose 1. Purpose Technical Summary The purpose of this procurement is to establish a contract to provide mechanical and electrical plant installation works in the following areas on the ITER Site in Saint-Paul

More information

Pump Specifications 450 Series 1/2 hp Submersible Sump Pump

Pump Specifications 450 Series 1/2 hp Submersible Sump Pump Pump Specifications 450 Series 1/2 hp Submersible Sump Pump 450_P1 R1/27/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice. 450-Series Dimensional

More information

University of Delaware

University of Delaware University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 14 00 _STORM WATER PIPING SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Storm water piping 2. Roof drains. 3. Area

More information

DESIGN & CONSTRUCTION GUIDELINES

DESIGN & CONSTRUCTION GUIDELINES DESIGN & CONSTRUCTION GUIDELINES EDITION: USF FACILITIES MANAGEMENT - DC 5 DCG FACILITIES MANAGEMENT DESIGN & CONSTRUCTION PHONE: (813) 974-2845 4202 E. FOWLER AVENUE, OPM 1000 TAMPA, FLORIDA 33620-7550

More information

SECTION STEAM AND CONDENSATE HEATING PIPING

SECTION STEAM AND CONDENSATE HEATING PIPING PART 1 GENERAL 1.01 SECTION INCLUDES A. Pipe and pipe fittings. B. Pipe hangers and supports. C. Valves. D. Steam piping system. E. Steam condensate piping system. 1.02 RELATED REQUIREMENTS A. Section

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM ITEM NO: 009-18 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Magnetic Material; control 2. REFERENCES: 2.1 801-5844249, Location of Magnetic Material MCM-1 2.2 800-5977033, Location

More information

SKF marine solutions. Improving fleet efficiency and predictability in a sustainable way. The Power of Knowledge Engineering

SKF marine solutions. Improving fleet efficiency and predictability in a sustainable way. The Power of Knowledge Engineering SKF marine solutions Improving fleet efficiency and predictability in a sustainable way www.bergab.ru Берг АБ bergab@ya.ru Тел.(495)-228-06-21,факс (495) 223-3071 Working together to bring benefits throughout

More information

100 Safety and Soft 114 Fall Protection 150 Environmental Skills Awareness 116 Compressed Gas 101 Personal Protective Cylinder Safety

100 Safety and Soft 114 Fall Protection 150 Environmental Skills Awareness 116 Compressed Gas 101 Personal Protective Cylinder Safety 100 and Soft Skills 101 Personal Protective Equipment (PPE) 101-01 Personal Protective Equipment 101-02 Hearing and Noise 101-03 Respiratory Protection Program 102 Worksite 102-01 Slip, Trip, and Fall

More information

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works

EXPRESSION OF INTEREST (EOI) FOR. Mechanical Works EXPRESSION OF INTEREST (EOI) FOR Mechanical Works KWtE-03-PR-EO-ACC-0 Rev01 15 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 6 1 Project overview ACCIONA s Engineering, Procuring &

More information

STANDARD PHRASEOLOGY SECTION B. 1. This section of standard phraseology is for general use in all disciplines.

STANDARD PHRASEOLOGY SECTION B. 1. This section of standard phraseology is for general use in all disciplines. STANDARD PHRASEOLOGY SECTION B 1. This section of standard phraseology is for general use in all disciplines. SHALL BE USED WHEN THE EXCEPTIONS LISTED IN 3.1 OF 009-23 ARE TO BE REMOVED/INSTALLED AS INTERFERENCES.

More information

Read Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED

Read Only Copy Not For Distribution. Chapter 17. Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.2 QUANTITY OF WATER REQUIRED Chapter 17 Private Potable Water Supply Systems 17.1 GENERAL REGULATIONS 17.1.1 Applicability The regulations in this chapter apply to any private potable water supply system where plumbing fixtures are

More information

Building Maintenance & Property Management Syllabus Outline

Building Maintenance & Property Management Syllabus Outline Building Maintenance & Property Management Syllabus Outline Building Maintenance & Property Management Program The knowledge-based Building Maintenance & Property Management Course is an accelerated method

More information

MANAGEMENT OF ASBESTOS FREE MATERIALS AND SPARES ON COMPANY SHIPS

MANAGEMENT OF ASBESTOS FREE MATERIALS AND SPARES ON COMPANY SHIPS SQEMS OPERATING PROCEDURE OP-TEC-08 1 of 6 References: Manual Chap. 1; 6 1. SCOPE The present Operating procedures scope is to provide guidelines to Company office personnel and company ship s crew, on

More information

.1 marine diesel engine.1 approved in-service appropriate experience.2 marine steam turbine.2 approved training.3 marine gas turbine ship experience

.1 marine diesel engine.1 approved in-service appropriate experience.2 marine steam turbine.2 approved training.3 marine gas turbine ship experience STCW Code Table A-III/2 Specification of minimum standard of for chief engineer officers and second engineer officers on ships powered by main propulsion machinery of 3,000 kw propulsion power or more

More information

SECTION BASIC FIRE SUPPRESSION MATERIALS AND METHODS. A. Section includes pipe, fittings, valves, and connections for sprinkler systems.

SECTION BASIC FIRE SUPPRESSION MATERIALS AND METHODS. A. Section includes pipe, fittings, valves, and connections for sprinkler systems. SECTION 210500 - BASIC FIRE SUPPRESSION MATERIALS AND METHODS PART 1 GENERAL 1.1 SUMMARY A. Section includes pipe, fittings, valves, and connections for sprinkler systems. B. Related Sections: 1. Section

More information

A. This Section includes the following sump pumps and accessories, inside the building, for building storm drainage systems:

A. This Section includes the following sump pumps and accessories, inside the building, for building storm drainage systems: SECTION 221429 - SUMP PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

COMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves

COMPLETE REVISION May Process Industry Practices Piping. PIP PNSM0110 Purchasing Requirements for Valves May 2013 Process Industry Practices Piping Purchasing Requirements for Valves PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice

More information

SAFETY DIGEST PART - B INDEX

SAFETY DIGEST PART - B INDEX SAFETY DIGEST PART - B INDEX STATUTORY REGULATIONS REGARDING SAFETY 1 FACTORY ACTS - 1 Approval of Factory 1 Section - 6 Approval, Licencing and Registration of Factories Rule - 3 Approval of Plans Rule-3C

More information

API 675 Evaluation. Section 1 General. 1.5 Referenced Publications. 1.1 Scope. 1.6 Unit Conversion. 1.2 Alternative Designs

API 675 Evaluation. Section 1 General. 1.5 Referenced Publications. 1.1 Scope. 1.6 Unit Conversion. 1.2 Alternative Designs API 675 Evaluation Evaluation of Pumps for Conformity to the Requirements of API Standard 675: Positive Displacement Pumps Controlled Volume. Second Edition, October 1994 Section 1 General 1.1 Scope API

More information

PROJECT SPECIFICATIONS

PROJECT SPECIFICATIONS PROJECT SPECIFICATIONS CITY OF PORTLAND BUREAU OF ENVIRONMENTAL SERVICES PROJECT SPECIFICATIONS FOR ANKENY PUMP STATION UPGRADE BES project number E07833 STANDARD REQUIREMENTS (DIVISION 0) GENERAL REQUIREMENTS

More information

The following words and terms, when used in this article, shall have the following definitions, unless the context clearly indicates otherwise:

The following words and terms, when used in this article, shall have the following definitions, unless the context clearly indicates otherwise: AVONDALE BACKFLOW ORDINANCE 24-1 Definitions. The following words and terms, when used in this article, shall have the following definitions, unless the context clearly indicates otherwise: "Approved"

More information

Part 1. Potentially hazardous materials in the ship's structure and equipment. 1A Asbestos & Asbestos Containing Materials (ACMs)

Part 1. Potentially hazardous materials in the ship's structure and equipment. 1A Asbestos & Asbestos Containing Materials (ACMs) Part 1. Potentially ous materials in the 's structure and equipment 1A Asbestos & Asbestos Containing s (ACMs) * Asbestos Steam supply piping and hangers Asbestos Steam exhaust piping and hangers Asbestos

More information

2. Water Pressure Booster Systems. 3. Duplex Pedestal Type Sump Pumps.

2. Water Pressure Booster Systems. 3. Duplex Pedestal Type Sump Pumps. PART 1: GENERAL 1.01 Purpose: A. The design guidelines contained herein includes the requirements for pumps utilized for plumbing systems at Texas State University. It is the intention of this document

More information

Owners List of Known Workplace Hazards CONTRACT TITLE LIBRARY SQUARE ELEVATORS #10-#11 MODERNIZATION (OCT20/16)

Owners List of Known Workplace Hazards CONTRACT TITLE LIBRARY SQUARE ELEVATORS #10-#11 MODERNIZATION (OCT20/16) Owners List of Known Workplace Hazards CONTRACT TITLE LIBRARY SQUARE ELEVATORS #10-#11 MODERNIZATION (OCT20/16) PROJECT MANAGER (CITY EMPLOYEE) MORRIS PONTELLINI CONTRACT NAME & # (IF KWN) Purpose This

More information

REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES. Safety Standards Act M 62

REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES. Safety Standards Act M 62 PROVINCE OF BRITISH COLUMBIA REGULATION OF THE MINISTER OF COMMUNITY, ABORIGINAL AND WOMEN S SERVICES Safety Standards Act M 62 I, Murray Coell, Minister of Community, Aboriginal and Women s Services,

More information

Contents EN 14015:2004 (E) page

Contents EN 14015:2004 (E) page Contents page Foreword... 11 1 Scope... 12 2 Normative references... 13 3 Terms, definitions, symbols and abbreviations... 15 3.1 Terms and definitions... 15 3.2 Symbols... 19 3.3 Abbreviations... 21 4

More information

EXECUTION REQUIREMENTS

EXECUTION REQUIREMENTS PART 1 - GENERAL 1.1 SUMMARY A. Section includes: Execution requirements. B. Related Requirements: 1. Specification Sections 2 through 49. PART 2 - PRODUCTS (Not Used). PART 3 - EXECUTION 3.1 SAFETY 01

More information

4th Class Power Engineering (PEN) Curriculum Mapping

4th Class Power Engineering (PEN) Curriculum Mapping Curriculum Mapping Program Curriculum A collection of 25 CTS courses have been developed to align with the revised (2017) 4th Class Power Engineering course outline. These courses, when combined, cover

More information

INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES. Interpretations of the. HSC Code

INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES. Interpretations of the. HSC Code INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES Interpretations of the HSC Code CONTENTS HSC1 Cupboard as part of the space Reg. 7.3.1 1996 HSC2 Classification of stairways Reg. 7.3.1.3 1996 HSC3

More information

P A C K A G E R. Oil & Gas

P A C K A G E R. Oil & Gas P A C K A G E R P R O D U C T S D I S T R I B U T O R Oil & Gas S T O C K I S T P I P E S V A LV E S F I T T I N G S F L A N G E S SEAMLESS & WELDED PIPES Carbon Steel Low Temperature Pipes Stainless Steel

More information

Lifting Appliances of Ships and Offshore Installations

Lifting Appliances of Ships and Offshore Installations CCS Rule Change Notice For: Lifting Appliances of Ships and Offshore Installations Version: May, 2016. RCN No.1 Effective date: 19 May, 2016 Beijing CONTENTS Chapter 3 CRANES, LIFTS, RAMPS AND SELF-LOADING

More information

SECTION MECHANICAL EQUIPMENT - GENERAL REQUIREMENTS

SECTION MECHANICAL EQUIPMENT - GENERAL REQUIREMENTS SECTION 11000 MECHANICAL EQUIPMENT - GENERAL REQUIREMENTS PART 1 - GENERAL 1.1 DESCRIPTION A. This section contains general information required to install mechanical equipment as shown on the plans and

More information

ADDENDUM NUMBER 1 PARTICULARS 1.01 DATE: APRIL 6, 2018

ADDENDUM NUMBER 1 PARTICULARS 1.01 DATE: APRIL 6, 2018 PARTICULARS 1.01 DATE: APRIL 6, 2018 ADDENDUM NUMBER 1 1.02 PROJECT: MIDLANDS TECHNICAL COLLEGE NE CAMPUS - CET CHILLER REPLACEMENT 1.03 OWNER'S PROJECT NUMBER: H59-N991-FW 1.04 ENGINEER: GMK ASSOCIATES

More information

SECTION SLUDGE HOLDING TANK DECANTER PUMP

SECTION SLUDGE HOLDING TANK DECANTER PUMP PART 1 GENERAL 1.01 SCOPE OF WORK A. The Contractor shall furnish and install all materials, labor and equipment to put into service the Sludge Holding Tank Decanter Pumping System in accordance with the

More information

SECTION INSTALLATION OF OWNER-FURNISHED PRODUCTS

SECTION INSTALLATION OF OWNER-FURNISHED PRODUCTS SECTION 13 00 50 INSTALLATION OF PART 1 GENERAL 1.1 GENERAL A. Furnish and install all tools, supplies, materials, equipment, appurtenances, and labor necessary for the installation, testing, and placing

More information

PROCUREMENT AND CONTRACTING DOCUMENTS GROUP

PROCUREMENT AND CONTRACTING DOCUMENTS GROUP PROCUREMENT AND CONTRACTING DOCUMENTS GROUP DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS 00 11 00 Notice To Bidders 00 21 00 Instructions To Bidders 00 22 00 Supplementary Instructions To Bidders

More information

Ship Recycling Convention

Ship Recycling Convention Ship Recycling Convention - What does it require shipbuilders to do? - Tasuku Hirabara Japan Ship Technology Research Association Contents Background IMO Ship Recycling Convention How To Develop Inventory

More information

University of Delaware

University of Delaware University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 67 00_PROCESS WATER PIPING SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. De-Ionized (DI) Water Systems 2. Distilled

More information

ENSA ENWESA SERVICES INDEX

ENSA ENWESA SERVICES INDEX ENSA ENWESA SERVICES INDEX 1. ENGINEERING, DESIGN AND TECHNOLOGY SERVICES (Ensa / ENWESA) Ensa has extensive experience designing nuclear components and pressure vessels since 1973 according to international

More information

WALL CANTILEVER WORK STATION JIB CRANE

WALL CANTILEVER WORK STATION JIB CRANE SECTION 14662 WALL CANTILEVER WORK STATION JIB CRANE ***** Gorbel, Inc. manufactures a broad range of material handling cranes including monorail, bridge, gantry, and jib cranes. Numerous work station

More information

SECTION HVAC PUMPS. A. Provide centrifugal HVAC pumps, called for in drawing schedule, and as needed for a complete and proper installation.

SECTION HVAC PUMPS. A. Provide centrifugal HVAC pumps, called for in drawing schedule, and as needed for a complete and proper installation. PART 1 - GENERAL 1.01 DESCRIPTION OF WORK SECTION 15540 HVAC PUMPS A. Provide centrifugal HVAC pumps, called for in drawing schedule, and as needed for a complete and proper installation. B. Provide variable

More information

SECTION AIR-TO-AIR ENERGY RECOVERY EQUIPMENT

SECTION AIR-TO-AIR ENERGY RECOVERY EQUIPMENT SECTION 23 72 00 AIR-TO-AIR ENERGY RECOVERY EQUIPMENT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Solar Thermal Nominated Technical Persons Criteria

Solar Thermal Nominated Technical Persons Criteria MCS Company Scheme Criteria for: Solar Thermal Nominated Technical Persons Criteria Current Criteria This document shows the Competence Criteria required to be met by a company undertaking the type of

More information

SPECIFICATIONS FOR ON-SITE REBUILD OF TRAVELING WATER SCREENS

SPECIFICATIONS FOR ON-SITE REBUILD OF TRAVELING WATER SCREENS SPECIFICATIONS FOR ON-SITE REBUILD OF TRAVELING WATER SCREENS 1. GENERAL 1.1. WORK INCLUDED 1.1.1. Includes all replacement parts and labor necessary for the rebuild of two Traveling Water Screens. The

More information

SECTION FACILITY POTABLE WATER DISTIBUTION

SECTION FACILITY POTABLE WATER DISTIBUTION PART 1 GENERAL 1.1 RELATED DOCUMENTS SECTION 22 11 00 FACILITY POTABLE WATER DISTIBUTION A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification

More information

C. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.

C. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Design and Construction Standards SECTION POTABLE WATER SYSTEMS

Design and Construction Standards SECTION POTABLE WATER SYSTEMS SECTION 15410 POTABLE WATER SYSTEMS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification sections,

More information

Code. 1) Code. Standard or Specification. Bolting

Code. 1) Code. Standard or Specification. Bolting Code 1. Code 1) Code (1) ASME B 31.1 : Power Piping (2) ASME B 31.3 : Process Piping (3) ASME B 31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 2) Material Code Bolting

More information

Generic New Construction Cost Estimating Libraries

Generic New Construction Cost Estimating Libraries Generic New Construction Cost Estimating Libraries Computerized Cost Estimating Computer-based tools to quickly formulate a cost estimate Manage cost data from central database Maintain current catalog

More information

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT

DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT TABLE OF CONTENTS INTRODUCTORY INFORMATION Section 00 00 10 Title Page 00 00 20 Table of Contents DIVISION 0 - BIDDING REQUIREMENTS, CONTRACTOR FORMS AND CONDITIONS OF THE CONTRACT Section 00 02 00 Invitation

More information

Solutions for: The Power Generation Industry

Solutions for: The Power Generation Industry Solutions for: The Power Generation Industry Why ERIKS SOME OF NORTH AMERICA S LARGEST POWER PLANTS HAVE TRUSTED ERIKS FOR DECADES. THEIR CONTINUED PARTNERSHIP AND CONFIDENCE IN US IS BASED ON: OUR NORTH

More information

Manufacturing Machinery and Equipment.

Manufacturing Machinery and Equipment. 560-12-2-.62 Manufacturing Machinery and Equipment. (1) Purpose. This rule explains the sales and use tax exemptions in O.C.G.A. 48-8- 3(34) and 48-8-3(34.3) for machinery and equipment necessary and integral

More information

TM Series Induced Draft Cooling Tower Specifications

TM Series Induced Draft Cooling Tower Specifications Delta Cooling Towers, Inc. 41 Pine Street P.O. Box 315 Rockaway, New Jersey 07866-0315 Telephone 973.586.2201 Fax 973.586.2243 www.deltacooling.com sales@deltacooling.com TM Series Induced Draft Cooling

More information

SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING

SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING SECTION 23 05 16 EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section includes flexible pipe connectors, expansion joints and compensators, pipe loops, offsets, and swing

More information

SECTION ALUMINUM GATES

SECTION ALUMINUM GATES P.O. Box 1058 370 South Athol Rd. Athol, Massachusetts 01331 Phone: (978) 249-7924 Fax: (978) 249-3072 SECTION ALUMINUM GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The CONTRACTOR shall furnish all labor,

More information

Technical Summary. Purpose. ITER_D_RZ5S7J v2.1

Technical Summary. Purpose. ITER_D_RZ5S7J v2.1 Purpose Technical Summary The purpose of this project is to provide mechanical and electrical plant installation works in the following Buildings on the ITER Site in Saint-Paul Lez Durance, France: Building

More information

VAAL UNIVERSITY OF TECHNOLOGY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING EXPERIENTIAL LEARNING FUNDAMENTAL LEARNING

VAAL UNIVERSITY OF TECHNOLOGY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING EXPERIENTIAL LEARNING FUNDAMENTAL LEARNING VAAL UNIVERSITY OF TECHNOLOGY FACULTY OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING EXPERIENTIAL LEARNING To fulfil the requirements of the National Diploma, a student must complete at least one

More information

University of Delaware

University of Delaware University Contact: Energy & Engineering Group (302) 831-1744 SECTION 22 13 00 _SANITARY SEWER PIPING SYSTEMS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Sanitary sewer piping buried 2. Sanitary

More information

SECTION FUEL-FIRED UNIT HEATERS

SECTION FUEL-FIRED UNIT HEATERS SECTION 23 55 33 PART 1 - GENERAL 1.1 DESCRIPTION A. This Section includes gas-fired unit heaters. SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between // // if not applicable

More information

Supplier s Technical Approval Technical and Quality Management System Evaluation

Supplier s Technical Approval Technical and Quality Management System Evaluation Supplier s Technical Approval Technical and Quality Management System Evaluation Technology & Engineering Division (TED), Aramco Overseas October, 2016 Outline: 1. Purpose & Scope of Plant Evaluation 2.

More information

SECTION B PLAN SUBMITTAL

SECTION B PLAN SUBMITTAL SECTION B PLAN SUBMITTAL Structural Design Requirements B-1 Submitting Plans... B-4 General Requirements for Plans... B-7 Midship Section Plans... B-8 Outboard Profile Plans... B-11 Inboard Profile Plans...

More information

SCHEDULE 8 CITY PRE-CONTRACT HAZARD ASSESSMENT FORM

SCHEDULE 8 CITY PRE-CONTRACT HAZARD ASSESSMENT FORM SCHEDULE 8 CITY PRE-CONTRACT HAZARD ASSESSMENT FORM Contract Title: INVITATION TO TENDER NO. PS20161432 WATERLESS TOILET BUILDINGS AT FRASERVIEW AND MCCLEERY (City employee) John Ross Contract Name and

More information

Flygt hydro turbines SMART AND COMPACT HYDROPOWER. 50 Hz

Flygt hydro turbines SMART AND COMPACT HYDROPOWER. 50 Hz Flygt hydro turbines SMART AND COMPACT HYDROPOWER 50 Hz Why submersible? In 1983 the first Flygt submersible turbine was installed in Sweden. Since then we have delivered over 350 turbines around the world.

More information

NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments

NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and

More information

SECTION (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS

SECTION (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS SECTION 26 05 48 (16071) - VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.01 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for

More information

McDuff WTP High Service Pump Replacement

McDuff WTP High Service Pump Replacement T E C H N I C A L M E M O R A N D U M 642-03 MCDUFF WTP HIGH SERVICE PUMP REPLACEMENT 642-03 McDuff WTP High Service Pump Replacement PREPARED FOR: PREPARED BY: Capital Budget Planning Craig Jones DATE:

More information

OPERATIONS AND MAINTENANCE TECHNICIAN IV (MECHANICAL) (JOURNEY)

OPERATIONS AND MAINTENANCE TECHNICIAN IV (MECHANICAL) (JOURNEY) OPERATIONS AND MAINTENANCE TECHNICIAN IV (MECHANICAL) (JOURNEY) Group-Section: Water System Operations - Various FLSA Status: Non-Exempt Bargaining Unit: AFSCME Classification: Operations and Maintenance

More information

REBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH

REBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH Guide for Rebuilding Vessels Less Than 90 Meters (295 Feet) in Length and Barges of Any Length GUIDE FOR REBUILDING VESSELS LESS THAN 90 METERS (295 FEET) IN LENGTH AND BARGES OF ANY LENGTH NOVEMBER 2014

More information

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...

More information

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION

SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION Page 210500-1 SECTION 210500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

INDUSTRIAL MECHANIC (MILLWRIGHT)

INDUSTRIAL MECHANIC (MILLWRIGHT) To qualify to challenge certification in this trade or be granted authority to supervise and sign-off on apprentices in this trade, individuals must have: worked a minimum of 9,540 hours performing the

More information

SECTION PACKAGED, SUBMERSIBLE SEWERAGE PUMP UNITS

SECTION PACKAGED, SUBMERSIBLE SEWERAGE PUMP UNITS PART 1 - GENERAL 1.1 DESCRIPTION SECTION 22 13 33 PACKAGED, SUBMERSIBLE SEWERAGE PUMP UNITS SPEC WRITER NOTES: 1. Delete between //----// if not applicable to project. Also delete any other item or paragraph

More information

NZQA unit standard version 1 Page 1 of 7. Demonstrate knowledge of electromechanical engineering principles for technicians

NZQA unit standard version 1 Page 1 of 7. Demonstrate knowledge of electromechanical engineering principles for technicians Page 1 of 7 Title Demonstrate knowledge of electromechanical engineering principles for technicians Level 3 Credits 10 Purpose This unit standard covers fundamental electromechanical engineering principles

More information

SECTION MOTOR CONTROL CENTER

SECTION MOTOR CONTROL CENTER SECTION 16445 MOTOR CONTROL CENTER PART 1 GENERAL 1.01 DESCRIPTION A. This section covers the contract item Motor Control Center (MCC). The contract item includes demolition and removal of existing MCC;

More information

DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS

DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS DESIGN AND CONSTRUCTION OF HEAVY INDUSTRIAL ANCHORAGE FOR POWER-PLANTS Peter J. Carrato, William F. Brittle Bechtel Power Corporation, USA Abstract Fossil fueled power-plant projects provide many design

More information