Professor George Stavrakakis ( Dr Apostolos Apostolou(

Transcription

1 Professor George Stavrakakis ( Dr Apostolos Apostolou(

2 CONCENTRATED SOLAR THERMAL POWER PLANTS (CSPPS) CSPPs utilize solar thermal power to produce electricity The power plant cycles applied for CSPPs are mainly based on conventional power plant components commercially available today on the 5-200MWe scale CSPPs use either Parabolic Trough or Solar Tower collection possiblilities

3 PARABOLIC TROUGH CSPPS Parabolic mirrors concentrate the sunlight on a line of focus. The solar field is composed of many parallel rows of trough collectors The rows are positioned in a North-South axis and use single-axis tracking, sufficient for optimal performance Concentrated solar energy is received on a special oil (Heat Transfer Fluid) running through the absorber tube Thermal storage solutions can be applied, which can aid the plant (in conjunction with fossil fuel) to operate continuously during intermittent sunshine and some hours after dawn

4 PARABOLIC TROUGH CSPPS - OPERATION PRINCIPLE

5 SOLAR TOWER CSPPS Solar tower fields are composed of several hundred individual, large dual-axis sun tracking flat plane mirrors called heliostats. These heliostats focus the rays on to the solar receiver. The solar receiver is located on the tower at a height of up to 100 m A HTF, usually molten salt is pumped through the receiver where it is heated to 550 C. The heated fluid can then be used to generate steam to produce electricity.

6 SOLAR TOWER CSPPS OPERATION PRINCIPLE

7 PARABOLIC TROUGH TECHNOLOGICAL EVALUATION Parabolic trough advantages: Lower environmental and aesthetic impact due to compact design Lower space requirements (fixed spacing) Synthetic oil (HTF) preservation heating not required the plant can operate solar-only Single Axis tracking ensures lower installment costs and higher reliability More than 1GWe of existing commercial applications ensure proven viability and expertise Parabolic trough disadvantages: Lower Solar to Electric efficiencies require more optical elements, increasing project costs

8 SOLAR TOWER TECHNOLOGICAL EVALUATION Solar tower advantages: Higher efficiencies (solar to electric energy conversion) due to reduced pumping and higher medium heat capacity (600+ ºC steam generation) Smaller volumes of HTF required, non-linearly related to the size of the plant, resulting in reduced costs Tower based heat absorption ensures easy and affordable transitions to future technologies Solar tower disadvantages: Supportive fossil heating for molten salt is obligatory, increasing O&M costs Very few commercial applications, higher solar field reflections, space requirements

9 PARABOLIC TROUGH VS SOLAR TOWER COMPARISON FOR A 50MW PLANT 50MW Scale CSPP Parabolic Trough Solar Tower Estimated plant cost (specific cost) 250 million (5.000 /Kwe) 150 million (3.000 /Kwe) Mirror Surface required m m 2 Solar-only Possible Impossible Storage Capacity 7 h 0,5 h Required land area ~ ~ Maximum Capacity Factor (at kwh/m 2 ) 42% 26% Future upgradability Reflections and environmental burden Low None High, up to 1000ºC through changes in receiver and HTF in near future High

10 GREEK LEGISLATIVE FRAMEWORK Recent Greek law 3468/2006 for Electrical energy production from Renewable Energy Sources (RES) and Combined Cycle Power Production (CCPP) provides high initiatives for investment in solar thermal power production Power Plants are defined as Hybrid when more than one source of energy is being utilized. Therefore CSPPs supported by any kind of fossil fuel are considered hybrid CSPPs can use fossil derived energy (i.e. LNG) for support of production. The fuel s total energy content must never succeed the 10% of the totally utilized energy in annual basis Selling price for energy produced by CSPP is set for 2008 at /kwh for large scale installments (>5MWe). Even higher prices are given for remote islands

11 PRELIMINARY FEASIBILITY ANALYSIS ON A POSSIBLE GREEK PROJECT Project Location: Megara, Attiki Annual levels of direct (2-axis tracking) solar irradiation kwh/m 2 (ref: PVGIS) Development Law 3299/04 subsidies 30% 50MW Scale CSPP Parabolic Trough Solar Tower Estimated plant cost (specific cost) 250 million (5.000 /kwe) 150 million (3.000 /kwe) Estimated Capacity Factor (at kwh/m 2 ) % 19-21% Estimated O&M costs 5 Million per year 2,2 Million per year Net electricity selling price /kwh /kwh

12 PRELIMINARY FEASIBILITY ANALYSIS ON A POSSIBLE GREEK PROJECT 50MW Scale CSPP Parabolic Trough Solar Tower After tax IRR (20yrs) 16,9 % 17,1% Year-to-Positive 6,2 yrs 5,9 yrs Net Present Value (20yrs) 515 Million 313 Million Minimum capacity factors were assumed Tax rates of 25% were considered with a 5% annual depreciation factor Environmental impacts and land requirements of Solar Tower CSPPs must not be disregarded Parabolic trough is the currently considered as the most realistic and financially viable application

13 PRELIMINARY FEASIBILITY ANALYSIS ON A POSSIBLE GREEK PROJECT 50MW Scale CSPP Parabolic Trough Solar Tower After tax IRR (20yrs) 16,9 % 17,1% Total investment for 50MWe 250 million 150 million Land required ~ ~ Parabolic trough is more profitable as it offers: Higher capital investment possibility for the same IRR output Higher capital investment possibility for the same nominal capacity authorization (50MWe) Easier environmental authorization and land acquisition due to smaller area requirements

14 OTHER INVESTMENT POSSIBILITIES Up to 200MWe of Hybrid Solar To enhance availability, efficiency and controllability, the solar field may be incorporated into a conventional combined cycle power plant. A hybrid 200MWe Integrated Solar Combined Cycle Plant (ICCPP) produces 25% of its total capacity from solar utilization during peak sunshine Up to 10% of the annually produced electrical energy is sun derived. Law 3468 accepts applications for hybrid plants Solar-derived electricity is priced separately (0.233 /kwh) from fossil fuel-derived electricity /kwh)

15 POSSIBLE LOCATIONS WITH AVAILABLE AREAS AND SUFFICIENT SUNSHINE