GREEN PRINTING AND PACKAGING SOLUTIONS

Size: px
Start display at page:

Download "GREEN PRINTING AND PACKAGING SOLUTIONS"

Transcription

1 GREEN PRINTING AND PACKAGING SOLUTIONS Basics & latest improvements Aleix Mas - June 2009

2 CONTENTS INTRODUCTION TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS CURRENT STATUS & FURTHER STEPS COST COMPARISON REQUIREMENTS TO BE CONSIDERED RECOMMENDED APPLICATIONS CONCLUSSIONS ENVIRONMENT DRIVES FLEXIBLE PACKAGING

3 INTRODUCTION Packaging means. A way of life Protection and preservation of goods Information provider Silent seller

4 INTRODUCTION We get differentiation at POS (point of sale) trough: New Shapes and utilities Sizes Colors Graphics Innovation

5 INTRODUCTION PACKAGING = WASTE

6 INTRODUCTION Environment drives flexible packaging GROWING OF PACKAGING GROWING OF WASTE Want more protection Want smaller/individual portions Want more colors Need More Environment friendly habits environment issues drive future printing SUSTAINABILITY

7 INTRODUCTION 1 ENERGY CONSUMPTION 2 EMISSIONS SUSTAINABILITY PROCESS OBJECTIVES 3 WASTE

8 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS OBJECTIVES OF THE PROJECT ENVIRONMENT Energy consumption No emissions Safety QUALITY Higher resolution Resistance Glossier colors COST Investment Running costs Change over cost

9 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS PRINTING PROCESS? Printed Image is a thin (0.5 to 2 micron) layer of resin and colorant (pigment) arranged in a specific pattern. Solvents and/or water are added to the resin in order to transfer the ink from the pot to the dot These transporter has to be removed after the printed image is formed applying energy. IS THIS THE MOST INTELLIGENT PROCESS? WHY DO NOT SIMPLIFY IT?

10 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS HOW DOES IT WORK? With conventional printing with water / solvent based inks it is needed to evaporate solvent or water in order to trap the following color. Finally all volatile organic compounds (VOC s) have to be oxidized to avoid contamination

11 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS HOW DOES IT WORK? With EB curable inks there is no need of interstation drying or curing. Printing occurs wet on wet. Transfer of ink over wet ink. No back trapping. The change of viscosity and tack when ink is speeded on the substrate allows wet trapping

12 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS HOW DOES IT WORK? WET ON WET Only one EB curing station at end No inter-station curing or drying Wet on wet printing: - Transfer of ink over wet ink - No back trapping

13 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS Printing quality advantages Reduced dot gain. Better image resolution Small dot size. Better half tones and better image resolution. Full grey scale Real color pigmentation (natural colors). Less gr/m2 of ink needed Wide range of colors Extremely glossy Hard scratch and abrasion resistance Conventional EB

14 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS EB ink Logistics No fire laws for ink storage. Less spaced required No explosion hazard: lower insurance costs Less ink returns, returns fully re-useable without further adjustment. Less storage requirement: reduced warehouse space Increases Heptacromy (7 color process) advantages Smaller press footprint, more space in factory In-line converting is possible with EB curable coatings and adhesives. No post curing. Immediate continued process is possible (slitting). Less Ink maintenance (no solvent). Less ink waste disposal No solvent handling or distillation Cleaning with water

15 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS Safety is a must ADVANTAGES OF THE PROCESS: SAFETY WORK ENVIRONMENT No solvent: fumes/incineration/co2 No photoinitiators (UV) Lower noise level (no fans) Better operator working quality: higher work productivity ratio levels

16 TECHNICAL FEATURES & ADVANTAGES OF THE PROCESS Summary QUALITY EB increases the printing quality (dot gain, definition & resolution), high gloss and abrasion resistance. LOGISTICS No post-curing, wet on wet, no adjustments of the ink. Less waste. SAFETY Safe technology no hazardous location required. ENVIRONMENT Pollution free. No VOC, No CO2 emission legislations and energy taxes

17 HISTORY, CURRENT STATUS & FURTHER STEPS o Milestone 0: Project Kick off. (2004) o Phase 1: Ink - inking system development. ( ) o Phase 2: Printing validation. ( ) o Phase 3: First machine sold, Israel. (2005) o Milestone 1: World presentation 350 m/min, 7 colours on PE. (2006) o Phase 4: Optimizing the press & ink behavior in industrial runs. (2006) o Phase 5: New solutions trough co-suppliers: aniloxes, plates, (2007) o Milestone 2: First industrial installation, Germany. (2007) o Phase 6: Wide range of possibilities: substrates, applications (2008) o Milestone 3: May 2008: World presentation. (DRUPA 08) o 500 m/min, 7 color process different substrates. (DRUPA 08) o Another machine sold, Lithuania. (2008)

18 HISTORY, CURRENT STATUS & FURTHER STEPS 2009 CURRENT2 STATUS & FURTHER STEPS: Getting the best from the new Highest lineatures (75 lines/cm = 190 lpi) Faster speed (up to 500 m/min = fpm) Adapted to new films

19 COST COMPARISON ELECTRICAL ENERGY Total Connected load Electricity rate TOTAL Electrical Energy Solvent based process Wetflex process GAS DRYER 265,0 Kw 306,0 Kw 0,064 /Kwh EB 0,064 process /Kwh 17,01 /h 19,65 /h NATURAL GAS Solvent based process Wetflex process GAS DRYER Total gas consumtion 21 m3/h - Natural gas cost 0,790 /m3 EB process - TOTAL Natural Gas 16,59 /h - TOTAL Energy cost 33,60 /h 19,65 /h SAVES 40% IN ENERGY COSTS

20 Inks: - Ink cost vs. ink performance - Expanded color gamut advantages -Improved set up Substrate: - Shorter Set up time - Thinner substrate possible Nitrogen cost: Concept Average nitrogen consumption, at 300 m/min with 1000 mm width PE/PP substrate Conversion ratio Average liquid nitrogen cost Average cost COST COMPARISON Amount 60 m3/h 1,170 kg/m3 0,130 /kg 9,12 /h COST /h ENERGY: Electricity + Gas cost 37,78 /h SOLVENT 1 EB 2 PROCESS ENERGY: Electricity 19,65 /h NITROGEN 9,12 /h 9,01 /h

21 REQUIREMENTS TO BE CONSIDERED EB UNIT CURING EQUIPMENT SAFETY AND REGULATORY ISSUES INKING SYSTEM

22 REQUIREMENTS TO BE CONSIDERED EB UNIT CURING EQUIPMENT Operator s Console Accelerator High Voltage Power Supply Control Cabinet

23 REQUIREMENTS TO BE CONSIDERED SAFETY AND REGULATORY ISSUES - ELECTRON BEAM EQUIPMENT IS NOT RADIOACTIVE. - IT DOES NOT SPONTANEOUSLY EMIT RADIATION. - IT IS ELECTRICAL AND CAN BE SHUT OFF. - WHILE OFF, IT DOES NOT PRODUCE RADIATION.

24 REQUIREMENTS TO BE CONSIDERED INKING SYSTEM Special inking system: Temperature control, antifoam, stirring. Cleaning with soap and water only. Special flexo doctor blade chamber. Anilox: screen: 360 l/cm 2 volume: 2-4 cm3/m 2 Plate resolution: up to 75 l/cm

25 REQUIREMENTS TO BE CONSIDERED 10 COLOR EB FLEXO PRESS

26 RECOMMENDED APPLICATIONS & END USERS RECOMMENDED APPLICATIONS Food and Beverage Packaging Frozen and Snack foods Shrink films Stand up pouches Outdoor bags Fertilizer and garden products Lamination replacement Pet food Labels Carton printing Food packaging Detergent

27 RECOMMENDED APPLICATIONS & END USERS ISRAEL Electron-beam 8 color press

28 RECOMMENDED APPLICATIONS & END USERS GERMANY Electron-beam 8 color press

29 RECOMMENDED APPLICATIONS & END USERS LITHUANIA Electron-beam 10 color press TÍTOL

30 CONCLUSSIONS EB printing today is technically capable. Now is time to start commercializing. There is a need to educate the market. Advantages are there and promoters will enjoy them. WE start a new technological era YOU can be one of the promoters

31 EB press at Drupa 08, world speed record 500 m/min (1.600 fpm)

32 Thank you very much for your kind attention Aleix Mas

UV & EB Technology for Flexible Packaging. Presented by: Don P. Duncan Director of Research Wikoff Color Corporation

UV & EB Technology for Flexible Packaging. Presented by: Don P. Duncan Director of Research Wikoff Color Corporation UV & EB Technology for Flexible Packaging Presented by: Don P. Duncan Director of Research Wikoff Color Corporation Is That All There Is? Chemistry: UV(100) EB(100) EB(

More information

Aquacure Hybrid Ink Technology for Digital Printing

Aquacure Hybrid Ink Technology for Digital Printing Aquacure Hybrid Ink Technology for Digital Printing Phil Jackman working for you. Who are SunJet? SunJet is the business unit responsible for digital within Sun Chemical globally SunJet has stated aim

More information

UVivid Flexo JD UV Curing Flexo Printing Inks PRODUCT INFORMATION

UVivid Flexo JD UV Curing Flexo Printing Inks PRODUCT INFORMATION UVivid Flexo JD UV Curing Flexo Printing Inks PRODUCT INFORMATION UVivid Flexo JD is a high gloss UV flexo ink system that incorporates a wide range of colours, process inks, metallic shades and specialist

More information

Ultraking Shrink U 2300 EB and Ultraking Shrink U 2500 UV. Applications: Shrink Sleeves Tamper evident neck bands Combination and Multi Packs

Ultraking Shrink U 2300 EB and Ultraking Shrink U 2500 UV. Applications: Shrink Sleeves Tamper evident neck bands Combination and Multi Packs Ultraking Shrink U 2300 EB and Ultraking Shrink U 2500 UV Applications: Shrink Sleeves Tamper evident neck bands Combination and Multi Packs Outline Introduction UV Curing Advantages / Disadvantages EB

More information

Dual Ultraviolet and Electron Beam Curing of Printing Inks

Dual Ultraviolet and Electron Beam Curing of Printing Inks Dual Ultraviolet and Electron Beam Curing of Printing Inks Stephen C. Lapin, Ph.D. PCT Engineered Systems, LLC. Davenport, IA Abstract Steve Lundahl Palermo Lundahl Industries Chisago City, MN The combined

More information

due to inadequate curing. Whilst poor curing will cause adhesion failures, it must be noted that List of Contents

due to inadequate curing. Whilst poor curing will cause adhesion failures, it must be noted that List of Contents Auxiliaries for UV-curable Screen Printing Inks Appropriate use of s Auxiliaries for UV-curable Screen Printing Inks Screen 2017 22. May Status of the reflector to determine whether the mirrors are clean

More information

Sustainable packaging and the

Sustainable packaging and the Development in Low-Voltage EB Curing for High Product Throughput Applications By Im Rangwalla Table 1 EB-cured products Sustainable packaging and the lowest carbon footprint are some of the mandates being

More information

TECHNICAL DATA SHEET KS-143 KY Shine HS Matte Soft Feel OPV

TECHNICAL DATA SHEET KS-143 KY Shine HS Matte Soft Feel OPV TECHNICAL DATA SHEET KS-143 KY Shine HS Matte Soft Feel OPV Product Description: KS-143 is formulated as an aqueous Soft-Feel overprint varnish for application to paper and paperboard through the inking

More information

TECHNICAL DATA SHEET KS-143

TECHNICAL DATA SHEET KS-143 TECHNICAL DATA SHEET KS-143 KY Shine HS Matte Soft Feel OPV : KS-143 is formulated as an aqueous Soft-Feel overprint varnish for application to paper and paperboard through the inking unit of an offset

More information

TAIYO PSR-4000 CC100SGHF (UL Name: PSR-4000FW / CA-40FT)

TAIYO PSR-4000 CC100SGHF (UL Name: PSR-4000FW / CA-40FT) TAIYO PSR-4000 CC100SGHF (UL Name: PSR-4000FW / CA-40FT) LIQUID PHOTOIMAGEABLE SOLDER MASK Curtain Coat Application Green Gloss Finish Halogen Free RoHS Compliant Excellent Coating Properties Compatible

More information

Technical Datasheet Issue: March 2018

Technical Datasheet Issue: March 2018 Technical Datasheet Issue: March 2018 Product Name SICURA Flex 39-8 1. Description / Application Flexo printing inks, curing by radical mechanism with UV-light, for paper, in-line Corona treated polyethylene,

More information

Impact of Zinc Oxide on the UV Absorbance and Mechanical Properties of UV Cured Films

Impact of Zinc Oxide on the UV Absorbance and Mechanical Properties of UV Cured Films Impact of Zinc Oxide on the UV Absorbance and Mechanical Properties of UV Cured Films R. K. SONI, MEENU TEOTIA* Department of Chemistry C.C.S, University, Meerut Ultraviolet radiation [UVR] UVR is divided

More information

intelligent solutions global class infrastructure CERAMIC TILES PACKAGING PRODUCTS

intelligent solutions global class infrastructure CERAMIC TILES PACKAGING PRODUCTS HIGH END PACKAGING SOLUTIONS NEXT GENERATION TECHNOLOGIES SOPHISTICATED MACHINERY RETAIL CONSUMER PRODUCTS INDUSTRY SPECIFIC SERVICES PACKAGING PRODUCTS CERAMIC TILES Tiles are a lifestyle product and

More information

Formulating to good effect

Formulating to good effect Seite/Page: 1 Formulating to good effect Some newly developed resins which lend themselves to the formulation of UV-cured effect coatings for plastic substrates are described These include UV- PUD dispersions

More information

1. Description 2-component varnish for gravure and flexography with high gloss and very good resistance to solvents.

1. Description 2-component varnish for gravure and flexography with high gloss and very good resistance to solvents. H0075858891 H0075858891 Product Family: ----- 2-Component Varnish 1. Description 2-component varnish for gravure and flexography with high gloss and very good resistance to solvents. 2. Product Features

More information

HIGH QUALITY PRINT MADE SIMPLE MAXIMUM PRODUCTIVITY MINIMUM DOWNTIME

HIGH QUALITY PRINT MADE SIMPLE MAXIMUM PRODUCTIVITY MINIMUM DOWNTIME Distributed by: HIGH QUALITY PRINT MADE SIMPLE MAXIMUM PRODUCTIVITY MINIMUM DOWNTIME MODULAR FLEXOGRAPHIC LABEL & PACKAGING PRESS UNWIND > PRINT > FINISHING > REWIND - HIGH QUALITY PRINT MADE SIMPLE The

More information

TROUBLE SHOOTING GUIDE

TROUBLE SHOOTING GUIDE Alligatoring Not enough catalyst used. Check for proper catalyst levels. Cracking Substrate/primer incompatibility, chemical reaction. Check compatibility of surfaces and products. Primer sprayed on cold

More information

Innovator. Customize your press for a world of possibilities in packaging design and production

Innovator. Customize your press for a world of possibilities in packaging design and production Innovator Customize your press for a world of possibilities in packaging design and production Table of Contents The Flexo Innovator...3 Smart Performance...4 The Printing Performance...5 The Base of

More information

EFFICIENT UV TECHNOLOGY DESIGNS FOR METAL PACKAGING ASIA CAN TECH CONFERENCE. Kuala Lumpur, November , John Clark

EFFICIENT UV TECHNOLOGY DESIGNS FOR METAL PACKAGING ASIA CAN TECH CONFERENCE. Kuala Lumpur, November , John Clark EFFICIENT UV TECHNOLOGY DESIGNS FOR METAL PACKAGING ASIA CAN TECH CONFERENCE Kuala Lumpur, November 7-9 2016, John Clark A G E N D A UV Market Penetration UV Technology UV Systems Overview Designing an

More information

Graphic Arts Polymers. Providing Creative Solutions

Graphic Arts Polymers. Providing Creative Solutions Graphic Arts Polymers Providing Creative Solutions Serving the Graphic Arts Industry... Hydrite Chemical Co. is a full-service, customer-oriented supplier of styrene/ acrylic emulsion polymers and solutions

More information

Handling of TEGO RC Silicones. Hardi Döhler Jürgen Pomorin

Handling of TEGO RC Silicones. Hardi Döhler Jürgen Pomorin Handling of TEGO RC Silicones Hardi Döhler Jürgen Pomorin 1 What are RC Silicones? RC = Radiation Curing, i. e. UV light or electron beam Solvent-less silicones, 100 % active, liquid, clear/slightly turbid,

More information

Ink Manufacturing and the Dispersion of Pigment into Printing Ink

Ink Manufacturing and the Dispersion of Pigment into Printing Ink Ink Manufacturing and the Dispersion of Pigment into Printing Ink 1. Introduction Printing of one form or another has been with us for centuries, and whilst the technologies of both the printing process

More information

Technical Data Jotamastic 80 MIO

Technical Data Jotamastic 80 MIO Technical Data Jotamastic 80 MIO Product description Jotamastic 80 MIO is a high solids two-pack micaceous iron oxide pigmented, surface-tolerant epoxy mastic coating which can be applied in low film thickness.

More information

White Pigments for Flexible Packaging Inks

White Pigments for Flexible Packaging Inks White Pigments for Flexible Packaging Inks Great Solutions with Small Particles Great Solutions with Small Particles Introduction In flexible packaging the consistency and performance of white ink are

More information

NORIPHAN XMR Halogen Free Ink System for IMD/FIM-Technology (back molding of screen printed films)

NORIPHAN XMR Halogen Free Ink System for IMD/FIM-Technology (back molding of screen printed films) Technical Information 7/2018 Halogen Free Ink System for IMD/FIM-Technology (back molding of screen printed films) Area of Application is a solvent-based two-component screen printing ink for IMD/FIM technology

More information

NOVUS-1200 THE FUTURE OF METAL PACKAGING

NOVUS-1200 THE FUTURE OF METAL PACKAGING NOVUS-1200 THE FUTURE OF METAL PACKAGING 1 Metal packaging under scrutiny Incompatibility Migration, corrosion, porosity of laquers Food compatibility of laquers - regulations FDA / BGA Costs Raw materials

More information

What s the Score? A Method for Quantitative Estimation of Energy Use and Emission Reductions for UV/EB Curing

What s the Score? A Method for Quantitative Estimation of Energy Use and Emission Reductions for UV/EB Curing What s the Score? A Method for Quantitative Estimation of Energy Use and Emission Reductions for UV/EB Curing By Ronald Golden, Ph.D. Table 1 A number of case studies have demonstrated that replacement

More information

THE EF. MPS AUTOMATED MULTI-SUBSTRATE PRESS

THE EF. MPS AUTOMATED MULTI-SUBSTRATE PRESS WWW.mpS4u.COM THE EF. MPS AUTOMATED MULTI-SUBSTRATE PRESS EF the FlAgSHip in FleXo PriNtiNG operator FOCUSED, results DRIVEN. THE EF MULTI-SUBSTRATE FLEXO PRESS The EF is a high-quality and highly automated

More information

Graphic Arts Polymers. Providing Creative Solutions

Graphic Arts Polymers. Providing Creative Solutions Graphic Arts Polymers Providing Creative Solutions Serving the Graphic Arts Industry > Waterbased Emulsions and Resin Solutions > Organic Processing > Foam Control > Chemical Distribution Hydrite Chemical

More information

TECHNICAL DATA SHEET KS-148 KY Shine Sandy Matte HS OPV

TECHNICAL DATA SHEET KS-148 KY Shine Sandy Matte HS OPV TECHNICAL DATA SHEET KS-148 KY Shine Sandy Matte HS OPV : KS-148 is a tactile aqueous overprint varnish for application to paper and paperboard through the inking unit of an offset press where a sandpaper

More information

MARKET E T RENDS D 3 of

MARKET E T RENDS D 3 of DIGITAL PACKAGING PRINTING Stijn Simoens Business Manager Packaging & labels HP Indigo EMEA ERA Packaging Conference 3-4 November 2010 Starnberg, Germany CONTENT Market trends Opportunities of Digital

More information

A FORMULATOR S GUIDE TO ENERGY CURABLE LAMINATING ADHESIVES

A FORMULATOR S GUIDE TO ENERGY CURABLE LAMINATING ADHESIVES A FORMULATOR S GUIDE TO ENERGY CURABLE LAMINATING ADHESIVES Authors: Sean Des Roches and Eileen Jaranilla-Tran RAHN AG CH-8050 Zürich, Switzerland RAHN GmbH DE-60528 Frankfurt, Germany RAHN USA Corp. Aurora,

More information

THE LOTTERY SOLUTION. TRESU Inline Printing Solution for Lottery Tickets

THE LOTTERY SOLUTION. TRESU Inline Printing Solution for Lottery Tickets THE LOTTERY SOLUTION TRESU Inline Printing Solution for Lottery Tickets Table of Contents TRESU Solutions...3 One Pass Solution...4 The Base of Performance...5 The Base of Performance - Overview...7 World

More information

TECHNICAL INFORMATION SWARCO UV-LINE Paint

TECHNICAL INFORMATION SWARCO UV-LINE Paint TECHNICAL INFORMATION SWARCO UV-LINE Paint SWARCO UV-LINE Paint Content 1 Main characteristics / Field of application... 3 2 Technical Data... 3 3 Processing instructions... 4 3.1 Training... 4 3.2 Colored

More information

From Vacuum to Atmosphere and back an in-house Process Chain for Different Products

From Vacuum to Atmosphere and back an in-house Process Chain for Different Products From Vacuum to Atmosphere and back an in-house Process Chain for Different Products Dr. Steffen Günther Vacuum coating low pressure 10-1 10-4 Pa (10-3 10-6 mbar) unhindered particle movement no unintended

More information

3,Rothwell Street, Timaru, South Canterbury. ; : Phone or

3,Rothwell Street, Timaru, South Canterbury.  ; : Phone or ECO-SEAL 100 3,Rothwell Street, Timaru, South Canterbury Email; ideaslab64@gmail.com : Phone +64 3 688 5508 or 0275 239888 Two Pack Flexible Self Priming high hysteresis waterproofing membrane designed

More information

This Rule is applicable to all graphic arts printing operations as defined in Section II. of this Rule.

This Rule is applicable to all graphic arts printing operations as defined in Section II. of this Rule. RULE 410.7 Graphic Arts - Adopted 6/29/81, Renumbered 5/89, Amended 5/6/91, 3/7/96 I. Applicability This Rule is applicable to all graphic arts printing operations as defined in Section II. of this Rule.

More information

LARGE FORMAT PRINTING IN LITHO QUALITY WITH ODORLESS INK

LARGE FORMAT PRINTING IN LITHO QUALITY WITH ODORLESS INK LARGE FORMAT PRINTING IN LITHO QUALITY WITH ODORLESS INK US THE DELTA WT 250 REPRESENTS A NEW GENERATION OF PRINTERS INCORPORATING DURST WATER TECHNOLOGY Durst has been supplying Multi-Pass inkjet printing

More information

24T3 Series Abrasion Resistant Fast Dry Polyurethane Coating

24T3 Series Abrasion Resistant Fast Dry Polyurethane Coating Technical Data Sheet Product Group Abrasion resistant coating Characteristics Product Information This two-component, fluoropolymers filled polyurethane coating is inherently light stable with excellent

More information

Chapter 6: Resource and Energy Conservation

Chapter 6: Resource and Energy Conservation Chapter 6: Resource and Energy Conservation CHAPTER CONTENTS 6.1 INK AND PRESS-SIDE SOLVENT AND ADDITIVE CONSUMPTION... 6-3 Methodology... 6-3 Limitations and Uncertainties... 6-5 Ink and Press-side Solvent

More information

The system uses FlexiStar HE Nitrocellulose bases and technology blend vehicle and extender. The following is the formula guide for blending:

The system uses FlexiStar HE Nitrocellulose bases and technology blend vehicle and extender. The following is the formula guide for blending: FLEXIBLE PACKAGING FlexiStar HE FLEXOGRAPHIC HEAT RESISTANT SURFACE INK SYSTEM FlexiStar HE FlexiStar HE is a solvent flexo surface print ink system that provides excellent technical performance. This

More information

In-line coating with TEGO RC Silicones

In-line coating with TEGO RC Silicones In-line coating with TEGO RC Silicones 2 EVONIK CORPORATION, USA RECOGNIZES THE IMPORTANCE OF ENVIRONMENTAL ISSUES TO OUR CUSTOMERS, AND IS PROUD TO BE A CERTIFIED MEMBER OF THE TLMI L.I.F.E. PROGRAM SINCE

More information

FILM ADHESIVES NOMINAL CURE TEMP F (C ) / TIME. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 260 (126) / 20 min Cream

FILM ADHESIVES NOMINAL CURE TEMP F (C ) / TIME. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 260 (126) / 20 min Cream FILM ADHESIVES LC-E220 LC-E221 LC-E221ET LC-E221FR LC-E221QC LC-E222 LC-E23 LC-E224 LC-E225 Elevated Tg vs. LC-E221 Additional vs LC-E221 with Accelerated Cure Cycle vs LC-E221 Optically Clear, Low Temp

More information

XFlex X2 Specifications

XFlex X2 Specifications XFlex X2 Specifications Max Speed 370 190 m/min Unwinding roll diameter 1000 mm (40 ) Web width 370 mm (14 1/2) Print width Infeed Printing Cylinder Cross print registration (CD) Longitudinal print registration

More information

Two pack solder resists are screen printed thermally curable products that give a highly resistant film on both tin/lead and copper PCB's.

Two pack solder resists are screen printed thermally curable products that give a highly resistant film on both tin/lead and copper PCB's. T Series - Two Pack Thermally Curing Solder Resists From the T Series family of Solder masks 1. Description Two pack solder resists are screen printed thermally curable products that give a highly resistant

More information

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss <4% <70% IR4

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss <4% <70% IR4 Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor S is a suitable screed that can be applied on cement-based floors which need high mechanical

More information

VELOX IDS 250. Direct-to-shape digital decoration for mass production of cylindrical containers. Unprecedented decoration quality

VELOX IDS 250. Direct-to-shape digital decoration for mass production of cylindrical containers. Unprecedented decoration quality VELOX IDS 250 Direct-to-shape digital decoration for mass production of cylindrical containers Unprecedented decoration quality Total operational agility Low total cost of ownership DIGITAL PACKAGING DECORATION

More information

TEGO RC Silicones It s all about knowing when to let go

TEGO RC Silicones It s all about knowing when to let go TEGO RC Silicones It s all about knowing when to let go TEGO RC Silicones TECHNOLOGY ADVANTAGES OF TEGO RC SILICONES Pressure sensitive labels, tapes as well as hygiene products are the most important

More information

A range of automotive refinish ancillaries designed to deliver results.

A range of automotive refinish ancillaries designed to deliver results. A range of automotive refinish ancillaries designed to deliver results. Spralac The trusted choice Choosing automotive refinish primers and clear coats that deliver quality, simply and easily, can make

More information

Soldermasks - Processes and Properties

Soldermasks - Processes and Properties Soldermasks - Processes and Properties Soldermask what is it for Enable mass soldering techniques Prevent solder shorts under components Prevent corrosion to underlying circuitry Plating resist for surface

More information

Integral Fuel Tank Coating

Integral Fuel Tank Coating Technical Data Sheet Product Group Fuel tank coating Characteristics Product Information - A two-component coating developed as a secondary fuel vapor barrier coating for integral fuel tanks. May be applied

More information

CROMAX PRO WB9908 SUPER JET BLACK BASECOAT

CROMAX PRO WB9908 SUPER JET BLACK BASECOAT CROMAX PRO WB9908 SUPER JET BLACK BASECOAT GENERAL DESCRIPTION A super jet black factory package color that delivers the deepest black to meet the most critical color standards. It features high hiding,

More information

Technical Data Sheet Rhenopox EB 06.1 Art. no.: A 5198

Technical Data Sheet Rhenopox EB 06.1 Art. no.: A 5198 version: 2016/06 page 1 of 5 Rhenopox EB 06.1 (2k Epoxy Color Traffic Zone) component A Art. no.: A 5198 - Products consist of a mixture of component A = Rhenopox EB 06.1 and component B = Rhenopox EH

More information

A range of automotive refinish ancillaries designed to deliver results.

A range of automotive refinish ancillaries designed to deliver results. A range of automotive refinish ancillaries designed to deliver results. Spralac The trusted choice Choosing automotive refinish primers and clear coats that deliver quality, simply and easily, can make

More information

HYDROFAN USER HANDBOOK

HYDROFAN USER HANDBOOK 97520 HYDROFAN the most user-friendly compliant basecoat system on the refinish market today. Designed to help body repair shops meet their targets for labour times, consumable costs, V.O.C. levels and

More information

AS EASY AS IT IS FLEX

AS EASY AS IT IS FLEX AS EASY AS IT IS FLEX X2 XFlex X2 Specifications Max speed 370 190 m/min Unwinding roll diameter 1000 mm (40 ) Web width 370 mm (14 1/2) Print width Infeed Printing cylinder Cross print registration (CD)

More information

Liquid bis-acylphosphine oxide (BAPO) photoinitiators. Author: Dr. Chingfan Chris Chiu Chitec Technology Co., Ltd. Taiwan

Liquid bis-acylphosphine oxide (BAPO) photoinitiators. Author: Dr. Chingfan Chris Chiu Chitec Technology Co., Ltd. Taiwan Liquid bis-acylphosphine oxide (BAP) photoinitiators Author: Dr. Chingfan Chris Chiu Chitec Technology Co., Ltd. Taiwan Abstract Bis-acylphosphine oxide (BAP) photoinitiators (PIs) have been used extensively

More information

Light-emitting diodes for ultravioletcuring

Light-emitting diodes for ultravioletcuring The State of UV-LED Curing: An Investigation of Chemistry and Applications By Ed Kiyoi Figure 1 Light-emitting diodes for ultravioletcuring applications (UV-LEDs) have been commercially available for nearly

More information

Guidance for the use of printing inks for paper and board packaging used for contact with food

Guidance for the use of printing inks for paper and board packaging used for contact with food Annex 1 to JIG/002/10E- PIJITF 1 Guidance for the use of printing inks for paper and board packaging used for contact with food 1-Regulations The Framework Regulation (EC) No 1935/2004 states that materials

More information

Flame retardant radiation curable coatings for parquet application

Flame retardant radiation curable coatings for parquet application Flame retardant radiation curable coatings for parquet application Since the early seventies, radiation curing technology has enjoyed an uninterrupted growth in the field of coatings, printing inks and

More information

VpCI PROTECTION SYSTEM FOR ELECTRICAL/ ELECTRONIC ENCLOSURES

VpCI PROTECTION SYSTEM FOR ELECTRICAL/ ELECTRONIC ENCLOSURES VpCI PROTECTION SYSTEM FOR ELECTRICAL/ ELECTRONIC ENCLOSURES VpCI SYSTEM APPLICATIONS Cortec Electricorr VpCI aerosol products and Cortec VpCI emitting devices are designed for use in interior enclosures

More information

Application Guidelines for Field-Applied Touch-up Paint Systems on Metal Panels

Application Guidelines for Field-Applied Touch-up Paint Systems on Metal Panels WHITE PAPER Application Guidelines for Field-Applied Touch-up Paint Systems on Metal Panels Introduction The information provided is intended to serve as a guide for the application of field applied air-dry

More information

Technical data sheet PROTECT 360 Anti-corrosion epoxy primer Fast drying epoxy anti-corrosion primer hardened with amine adduct RELATED PRODUCTS H5950

Technical data sheet PROTECT 360 Anti-corrosion epoxy primer Fast drying epoxy anti-corrosion primer hardened with amine adduct RELATED PRODUCTS H5950 Anti-corrosion epoxy primer Fast drying epoxy anti-corrosion primer hardened with amine adduct RELATED PRODUCTS H5950 H5960 THIN 60 Epoxy primer hardener Epoxy primer hardener Epoxy thinner USE: Means

More information

Micro mirror. Seite/Page: 14

Micro mirror. Seite/Page: 14 Micro mirror Special aluminum pigments in the packaging and label market. Jörg Seubert. A new class of high brilliant mirror effect inks is now able to provide a realistic alternative to foil blocking,

More information

Greener production processes and continuous process improvement through the use of next generation coating thickness measurement methods

Greener production processes and continuous process improvement through the use of next generation coating thickness measurement methods Greener production processes and continuous process improvement through the use of next generation coating thickness measurement methods Novel eco-friendly coating thickness measurement technology Uses

More information

Series 631 2C-Screen Printing Ink for Flat Glass

Series 631 2C-Screen Printing Ink for Flat Glass Series 631 2C-Screen Printing Ink for Flat Glass Highly opaque 2-component screen printing ink Series 631 based on highly resistant raw materials for printing of flat glass for indoor use. Series 631 does

More information

Excelitas Technologies Utilizing deep-uv LED below 300nm to enhance curing

Excelitas Technologies Utilizing deep-uv LED below 300nm to enhance curing Excelitas Technologies Utilizing deep-uv LED below 300nm to enhance curing Dr. Tanja Bizjak-Bayer Business Development Manager, OmniCure Who We Are Lumen Dynamics was acquired by Excelitas Technologies

More information

ADDING VALUE TO VACUUM COATED PRODUCTS BY IMPROVING METALLIZED FILMS PROPERTIES AND FUNCTIONALITIES

ADDING VALUE TO VACUUM COATED PRODUCTS BY IMPROVING METALLIZED FILMS PROPERTIES AND FUNCTIONALITIES ADDING VALUE TO VACUUM COATED PRODUCTS BY IMPROVING METALLIZED FILMS PROPERTIES AND FUNCTIONALITIES by Fabiano Rimediotti NORMECCANICA GROUP Vacuum Division Piacenza Italy OUTLINE Introduction - Motivation

More information

Aerowave Technical Data Sheet. Product Group. Epoxy topcoats. Characteristics

Aerowave Technical Data Sheet. Product Group. Epoxy topcoats. Characteristics AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Epoxy topcoats Characteristics Product Information is a water-based, 2-component, amine cured epoxy finish. - Water based technology - Compatible

More information

UV structural Adhesives and Sealants How They Are Unique In The Larger Universe Of Photocuring Resins

UV structural Adhesives and Sealants How They Are Unique In The Larger Universe Of Photocuring Resins UV structural Adhesives and Sealants How They Are Unique In The Larger Universe Of Photocuring Resins By: C. Bachmann, Sr. VP Marketing Communications S. Cantor, Sr. Research Fellow UV structural adhesives

More information

UV-Cured Pressure Sensitive Adhesives Lower Total Cost Of Ownership And Environmental Superiority

UV-Cured Pressure Sensitive Adhesives Lower Total Cost Of Ownership And Environmental Superiority UV-Cured Pressure Sensitive Adhesives Lower Total Cost Of Ownership And Environmental Superiority Introduction Christopher A. Bradlee, BASF Corporation, Wyandotte, USA Charlene A. Wall, BASF Corporation,

More information

Application. Fuselage Fuselage Fuselage. Decoration Decoration

Application. Fuselage Fuselage Fuselage. Decoration Decoration Product Group Polyurethane Topcoats Characteristics Product Information is a 3 component durable high gloss finish for exterior use. - Extended durability / UV resistance - High solids - Resistance to

More information

AIR QUALITY PERMITTING CRITERIA INCLUDING BEST AVAILABLE TECHNOLOGY CRITERIA FOR HEATSET WEB OFFSET LITHOGRAPHIC PRESSES

AIR QUALITY PERMITTING CRITERIA INCLUDING BEST AVAILABLE TECHNOLOGY CRITERIA FOR HEATSET WEB OFFSET LITHOGRAPHIC PRESSES 7.8 Heatset Web Offset PERMIT Lithographic Presses AIR QUALITY PERMITTING CRITERIA INCLUDING BEST AVAILABLE TECHNOLOGY CRITERIA FOR HEATSET WEB OFFSET LITHOGRAPHIC PRESSES BACKGROUND The air pollutants

More information

ABOUT US... 1 MAGHOLD PRODUCT... 2 DIRECT PRINTABLE FLEXIBLE MAGNET... 3 RECEPTIVE... 7 CLINGMAG... 9 MAGNET STRIP & TAPE... 11

ABOUT US... 1 MAGHOLD PRODUCT... 2 DIRECT PRINTABLE FLEXIBLE MAGNET... 3 RECEPTIVE... 7 CLINGMAG... 9 MAGNET STRIP & TAPE... 11 WWW.MAGHOLD.COM Content ABOUT US... 1 MAGHOLD PRODUCT... 2 DIRECT PRINTABLE FLEXIBLE MAGNET... 3 PLAIN & ADHESIVE BACKED FLEXIBLE MAGNET... 5 1. Magnet for Laminating.5 2. Build Up the Magnet Base for

More information

Waterpoxy waterbased epoxy system

Waterpoxy waterbased epoxy system Waterpoxy waterbased epoxy system Giorgio Sabbadini Bankok June 2004 APPLICATION POSSIBILITIES OF THE WATERBASED EPOXY SYSTEMS INDUSTRIAL AND CIVIL ENGINEERING FIELDS Reasons to switch to water based systems

More information

Application. Fuselage Fuselage Fuselage. Decoration Decoration

Application. Fuselage Fuselage Fuselage. Decoration Decoration Product Group Polyurethane Topcoats Characteristics Product Information is a 3 component durable high gloss finish for exterior use. - Extended durability / UV resistance - High solids - Resistance to

More information

Water Reducible UV Cure Allophanate Urethane Acrylates

Water Reducible UV Cure Allophanate Urethane Acrylates Water Reducible UV Cure Allophanate Urethane Acrylates Abdullah Ekin 1, Michael Ludewig 2, Michael Dvorchak 1, Nusret Yuva 2 and Wolfgang Fischer 2 Summary 1 Bayer MaterialScience LLC, Pittsburgh, PA 2

More information

10P20-14 High Solids Low IR Primer

10P20-14 High Solids Low IR Primer Technical Data Sheet Product Group Epoxy Primer Characteristics Product Information - A high solids primer for aircraft exteriors meeting the low infrared reflectance requirements of the referenced specification.

More information

Piezo Inkjet Ink Series 8800UV For Durst Rho 161/162TS Printer

Piezo Inkjet Ink Series 8800UV For Durst Rho 161/162TS Printer Piezo Inkjet Ink Series 8800UV For Durst Rho 161/162TS Printer Product Bulletin 8800UV January 2013 Health and Safety Information Read all health hazards, precautionary, and first aid statements found

More information

UCECOAT Waterborne UV Resins for Field Applied Wood Floor Finishes

UCECOAT Waterborne UV Resins for Field Applied Wood Floor Finishes Waterborne UV Resins for Field Applied Wood Floor Finishes waterborne UV resins are recommended for use in field applied wood topcoats. The low viscosity of resins, obtained without the use of low molecular

More information

Title. Adhesive lamination: new technology in Solvent Less lamination.

Title. Adhesive lamination: new technology in Solvent Less lamination. AIMCAL CONFERENCE 2016, Memphis, TN. Title. Adhesive lamination: new technology in Solvent Less lamination. Giancarlo Caimmi, Nordmeccanica NA Ltd. Short abstracts: A new development in solvent less lamination

More information

Enhanced Conversion of EB Curable Systems with Low Dose Irradiation

Enhanced Conversion of EB Curable Systems with Low Dose Irradiation Enhanced Conversion of EB Curable Systems with Low Dose Irradiation Mikhail Laksin and Subh Chatterjee IdeOn LLC, Hillsborough, NJ USA Abstract Significant benefits from curing various electron beam (EB)

More information

Polyurethane Topcoats

Polyurethane Topcoats AkzoNobel Aerospace Coatings Technical Data Sheet Product Group Polyurethane Topcoats Characteristics Product Information is a 3-component durable high gloss polyurethane clear-coat for application on

More information

Marabu. Mara Pur PU. Field of Application. Characteristics

Marabu. Mara Pur PU. Field of Application. Characteristics Solvent-based screen printing ink for pretreated polyethylene (PE) and polypropylene (PP), thermosetting plastics, metals, and coated surfaces High gloss, high opacity, fast drying twocomponent ink, resistant

More information

Corrosion Resistance Weatherability Fire-proof Color Stable

Corrosion Resistance Weatherability Fire-proof Color Stable Corrosion Resistance Weatherability Fire-proof Color Stable History About PSP STEEL Features Technical Data Sheet Applications ASA Film Laminated PSP STEEL PVC Film Laminated PSP STEEL PET Film Laminated

More information

ARCHITECTURAL POWDER COATING

ARCHITECTURAL POWDER COATING ARE YOU READY TO JOIN THE NEXT GENERATION OF DESIGNERS & ARCHITECTS? - IT STARTS HERE 1 / 8 FIND OUT HOW POWDER COATING IS TAKING THE INDUSTRY TO NEW HEIGHTS! ARCHITECTURAL POWDER COATING THE 3 DESIGN

More information

Epoxol Floor. Two component solvent-free epoxy system for creation of self-levelling floors. Fields of Application. Properties/ Advantages

Epoxol Floor. Two component solvent-free epoxy system for creation of self-levelling floors. Fields of Application. Properties/ Advantages Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor is a suitable screed that can be applied on cement-based floors which need high mechanical

More information

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss >4% <70% 83mg IR4

Two component solvent-free epoxy system for creation of self-levelling floors. Gloss >4% <70% 83mg IR4 Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor P is a suitable screed that can be applied on cement-based floors which need high mechanical

More information

New Developments Environment Friendly Adhesive Systems. Shilip Kumar Business Manager Rohm and Haas (India) Pvt. Ltd.

New Developments Environment Friendly Adhesive Systems. Shilip Kumar Business Manager Rohm and Haas (India) Pvt. Ltd. New Developments Environment Friendly Adhesive Systems Shilip Kumar Business Manager Rohm and Haas (India) Pvt. Ltd. August, 2008 Contents Drivers for Innovation in Adhesives Laminating Adhesives An overview

More information

Waterborne UV-curing Polyurethane Dispersions for Clear and Pigmented Coatings on Wood

Waterborne UV-curing Polyurethane Dispersions for Clear and Pigmented Coatings on Wood Waterborne UV-curing Polyurethane Dispersions for Clear and Pigmented Coatings on Wood Christoph Irle, Martin Bayona, Bob Wade, Michael Dvorchak Waterborne UV-curing coatings for furniture have now enjoyed

More information

introducing the most complete and durable protective coating system for the heavy industry

introducing the most complete and durable protective coating system for the heavy industry introducing the most complete and durable protective coating system for the heavy industry ceramic pro strong Ceramic PRO Strong is the latest technology from Nano Shine LTD. Ceramic PRO Strong is a clear

More information

Most Popular Sheetfed Products

Most Popular Sheetfed Products Most Popular Sheetfed Products Premium Sheetfed Vehicles KB-210 KB-215 KB-298 Workhorse Lithomaster Series, with good work & turn characteristics The flagship of the Lithomaster Series. Light gel, high

More information

Pressure sensitive labeling of terminally sterilized medical device packaging: Testing label materials for adhesion and durability over time

Pressure sensitive labeling of terminally sterilized medical device packaging: Testing label materials for adhesion and durability over time Pressure sensitive labeling of terminally sterilized medical device packaging: Testing label materials for adhesion and durability over time Presented by: Dave Olson - Advanced Web Minneapolis, MN March

More information

Property Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)

Property Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong) Approved 343 1,2 343 alkyd ^(ValidationDate) 1 Product description This is a one component oxidatively drying alkyd coating. Can be used as primer or mid coat in atmospheric environments. Suitable for

More information

For purchasing information visit: Sikkens Cetol Novatech

For purchasing information visit: Sikkens Cetol Novatech The following Technical Datasheet is provided by Manns Wood Finishes Direct cannot be held liable for the information contained within this document. For purchasing information visit: Sikkens Cetol Novatech

More information

Application This structure is the internationally accepted PVC/PE/PVdC film suitable for sensitive medicines. WHO recommends these blister films for p

Application This structure is the internationally accepted PVC/PE/PVdC film suitable for sensitive medicines. WHO recommends these blister films for p Chemical PVdc Coated Blister RMCL manufactures a range of multilayered, high quality and high performance structures for a variety of applications. These structures are created from an optimized combination

More information

TAIYO PSR-4000 AUS21

TAIYO PSR-4000 AUS21 TAIYO PSR-4000 AUS21 LIQUID PHOTOIMAGEABLE SOLDER MASK Specifically Designed for Polyimide Film for TAB-BGA Low Warpage Halogen-Free Green, Glossy Finish Hard Surface Finish Fine Dam Resolution Develops

More information

THERMOFIT ADHESIVE S-1125 Epoxy, Flexible

THERMOFIT ADHESIVE S-1125 Epoxy, Flexible Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1011 Issue 3 March 14, 1988 Issue 2 THERMOFIT ADHESIVE S-1125 Epoxy, Flexible

More information

In-Vacuum Flexo Top-Coating on Metallized Film: An Update on the State of the Art. By: Dante Ferrari, Celplast Metallized Products Limited

In-Vacuum Flexo Top-Coating on Metallized Film: An Update on the State of the Art. By: Dante Ferrari, Celplast Metallized Products Limited In-Vacuum Flexo Top-Coating on Metallized Film: An Update on the State of the Art By: Dante Ferrari, Celplast Metallized Products Limited Introduction Celplast has presented at many previous AIMCAL conferences

More information

Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C

Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C Other Technical Data Sheet 1505;1506 1 1505 novolac epoxy VValidationDate). 1 Product description This is a two component polyamine cured novolac epoxy coating. It is heat resistant up to 200 C and can

More information