TECHNOLOGY PLASMA. Ahornweg Weikersheim, Germany
|
|
- Neal Hood
- 6 years ago
- Views:
Transcription
1 TECHNOLOGY
2 TECHNOLOGY The plasma process is used to optimally prepare material surfaces before processes such as gluing, soldering, bonding, wire-bonding, injection molding, potting, coating, printing or any other process that requires a clean surface and sufficient surface energy to create a durable adhesion. The bdtronic plasma systems offers the up to date pretreatment method for long-term stable bond strength, free of residues, clean and polar surfaces. Laborious pre-treatments such as chemical cleaning and use of primers can be avoided, resulting in cost savings and a better environment protection.
3 APPLICATIONS Before Potting/Vacuum potting Before Sealing, gluing or printing Before Spraying, coating or painting - Fan controllers - Sensors Before Applying thermally conductive pastes - Engine control units - Cured-in-place gaskets - Sealing of enclosures Before Bonding - Truckloading ramp lights - Door handles - PCBs Before Foaming - Filters - Foamed gasket for car windows
4 BASIC PRINCIPLE What is plasma? - 4th state of matter - Partially ionized gas (ions + electrons) - Physical pretreatment method % of the universe - Gas plasma artificially generated by electric field Benefits - Long-term stable bond & highest strength - Residues-free surface - Improved adhesion - Reliable gluing process - Long-term durable joint - 100% tight sealing How does plasma work? - Electron and ion bombardment - Cracking and blasting away of carbon hydrides - Breakage of atomic bindings on surface - Changing intermolecular forces - Surface reaction with oxygen or OH- - Increasing the surface energy (polarity) Features - Continuous process - Process monitoring - Option for traceability
5 PROCESS Durable adhesion, free of residues, clean and polar surfaces! Cleaning Passivation Hydrophilization - Ultrafine cleaning - Removing organic contaminations - Removing the separation layer - Controlled homogenous oxidation of surface - Increasing the surface roughness (nm) - Decreasing the surface roughness depth (nm) Activation Reduction Functionalization - Increasing surface tension - Improving adhesion - Removal of (inhomogeneous) oxide layer - Special process gas (forming gas) required - Creating e.g. OHgroups on surface - Increasing concentration of O- on the surface - Improving wettability
6 PROCESS DIMENSIONING Contact angle measurement - Exact method to determine the surface tension Use of test ink - Simplified method to determine the surface tension Required surface energy - Base products Greater than 38 m/n to print with solvent-based varnish Greater than 42 m/n to bond with solvent-based glues Greater than 45 m/n to print with water-based varnish
7 PRINCIPLES 1. Atmospheric plasma BPS300 BPS Low pressure plasma BPS-LP Advantages - Space-saving - Potential-free plasma - User friendly - Suitable for electronics and thermal sensible parts - Inline compatible - Cost effective Advantages - Potential-free, particle-free low pressure plasma - Cold plasma - No static charging - Suitable for electronics and thermal sensible parts - Inline compatible or batch plant - Modular construction
8 1. ATMOSPHERIC PRESSURE Advantages - Environmentally friendly - User friendly - Ozone-free - Cost effective - Contact free - Inline compatible - Space saving - Potential free (suitable for electronics) - Continuous process control Features - Suitable for electronics - High availability - Integration in continuous line production - Variants for all typical plasma applications Process monitoring and analysis - Of all relevant process parameters - Wear
9 1. ATMOSPHERIC PRESSURE Body with tube connection Optical ignition control/gas flow control Handle Tube package Plasma generator Plasma head with integrated electrode Plasma nozzle
10 1. ATMOSPHERIC PRESSURE BPS300 Features - Standard device (300W) - Adapted to dispensing process - Suitable for thermoplastics and metal - Light-weight and space saving - Low temperature - Plug&Play - Extended nozzle Options - PROFIBUS/PROFINET - All process data available for traceability - Remote maintenance - Twin-head device
11 1. ATMOSPHERIC PRESSURE BPS1000 Features - High power device ( 1000W) - High process speed - Suitable for electronics - Wide range of settings - Air pressure - Plasma ignition Options - Large variety of nozzle variants - PROFIBUS/PROFINET - All process data available for traceability - Remote maintenance - Twin-head device - Large width nozzle (rotating nozzle) - Potential-free nozzle
12 1. ATMOSPHERIC PRESSURE BPS1000 VISUALIZATION Settings: frequency, override, gas flow rate, gas pressure, current and voltage
13 1. ATMOSPHERIC PRESSURE BPS1000 VISUALIZATION Process monitoring: wear, operating hours, settings, gas pressure and plasma ignition
14 2. LOW PRESSURE Advantages - Environmentally friendly - User friendly - Ozone-free - Cost effective - Contact free - Inline compatible - Space saving - Potential free (suitable for electronics) - Continuous process control Features - Low temperature plasma - Integration into production lines (cycle) with assembly belt - Suitable for typical transport & product carrier systems - 40kHz plasma generator - 2x process gas supply - Modular design with configurable Plasma chamber size Pump power
15 2. LOW PRESSURE VISUALIZATION Process control: gas flow rates, pressure control, action list, action symbolic
16 2. LOW PRESSURE VISUALIZATION Process monitoring: gas flow rates, pressure, plasma ignition
17 PROCESS CONTROL Gas flow monitoring Hour meter Power User level management Remote maintenance
18 STANDARD MACHINES Table top Manual/integration plasma machine for individual part processing with manual load and unload Integration unit Incl. cabinet, touch panel and digital handshake/profibus B2000-P Integration plasma machine for small batch production with program change and manual load and unload B5100-P/5200-P Fully automated plasma machines for high production rates and fully automated part handling B5600-P Fully automated plasma machine with augmented traversing range BPS-LP Low pressure plasma machine with full process control and integrated PLC
19 REFERENCE PROJECT Product description & usage/function/information: Cleaning and activation of plastic (PBT GF30) and aluminum (sheet, die cast) housing and lid (tongue and groove) prior to dispensing of a sealing/adhesive and leakage-free lid attachment for the automotive industry Project description: - Two processes in one machine - Less invest - Less floor space - Only a single XYZ system required to move both heads Process: Combined integration of plasma and dispensing
20 THANK YOU FOR YOUR ATTENTION
EQUIPMENT AND SYSTEM FOR VACUUM COATING METALLIZING, SPUTTERING, PLASMA and PECVD. Hybrid system KOLZER DGK 36
email : carlo.gennari@fastwebnet.it web site : http://carlogennariforni.beepworld.it/kolzer.htm EQUIPMENT AND SYSTEM FOR VACUUM COATING METALLIZING, SPUTTERING, PLASMA and PECVD Hybrid system KOLZER DGK
More informationSikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour
GLUING AND RIVETING Sikaflex 221, black Elastic Sikaflex 221 is a high-adhesion, polyurethane-based sealing compound for Low-odour connecting and overlapping joints, apron panels, trims, floor assemblies
More informationEffects of Atmospheric Pressure Plasma on Adhesion
Effects of Atmospheric Pressure Plasma on Adhesion Josh Sherwood, Loctite Industrial Adhesives, Henkel Corporation Presented at ANTEC - May, 2010 Abstract: Like any manufacturer, adhesive customers are
More informationComparison of Atmospheric Plasma and Corona Treatments in Promoting Seal Strength
Comparison of Atmospheric Plasma and Corona Treatments in Promoting Seal Strength Presented by Rory Wolf Business Unit Manager ITW Pillar Technologies Discussion Agenda o Study Objective o Extrusion Coating
More informationARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE
ARCHITECTURAL GUIDE SPECIFICATIONS - DESCRIPTIVE MANNINGTON COLORFIELDS SHEET RUBBER FLOORING Section 09 65 16 Sheet rubber Flooring (Thermoset Rubber) Created May 2012 Mannington Mills, Inc. P. O. Box
More informationCleaning Before Coating. Presented by Jigar Patel, Senior Process Engineer
Cleaning Before Coating Presented by Jigar Patel, Senior Process Engineer Cleaning Before Coating Influencing factors Failure mechanisms Coating failures Cleaning before coating Analytics and test methods
More informationPlasma for Underfill Process in Flip Chip Packaging
Plasma for Underfill Process in Flip Chip Packaging Jack Zhao and James D. Getty Nordson MARCH 2470-A Bates Avenue Concord, California 94520-1294 USA Published by Nordson MARCH www.nordsonmarch.com 2015
More informationAMERICAS Tel or Tel CHINA, SHENZHEN Tel
www.uic.com email: universal@uic.com AMERICAS Tel. 1-800-432-2607 or Tel. +1-607-779-7522 CHINA, SHENZHEN Tel. +86-755-2685-9108 CHINA, SHANGHAI Tel. +86-21-6495-2100 EUROPE Tel. +36-23-445-500 2010 Universal
More informationLow Pressure Molding Overview. Henkel Electronics
Low Pressure Molding Overview Henkel Electronics Agenda 1 Technology 2 Process 3 Solutions 2 February 25, 2016 Low Pressure Molding Overview Agenda TECHNOMELT Low Pressure Molding 1. Overview of Technology
More informationSurface Modification: How low-pressure plasma treatments can benefit your manufacturing process
Surface Modification: How low-pressure plasma treatments can benefit your manufacturing process surface modification Surface modification is growing exponentially as industrial engineers and manufacturers
More informationInnovative Application Technologies for Wood Products. Helping you apply: Adhesives & Sealants Liquid Finishes Powder Coating
Innovative Application Technologies for Wood Products Helping you apply: Adhesives & Sealants Liquid Finishes Powder Coating When it comes to wood and furniture assembly and finishing, Nordson application
More informationHenkel Smart Chemistry Hub Event: Advanced Gasketing Solutions Madison Heights, May 17
Henkel Smart Chemistry Hub Event: Advanced Gasketing Solutions Madison Heights, May 17 Power Up! Sealing battery packs and electronic components Bill Brown Manager - Applications Engineering Agenda 1.
More informationCORONA AND PLASMA TREATMENT
CORONA AND PLASMA TREATMENT AN OVERVIEW Introduction Plastic processing companies, especially those producing and converting plastic films, are confronted every day with the problems of improving adhesion,
More information3 700-Series Hybrid Products:
3 700-Series Hybrid Products: 3M 3M 3M Technical Data December, 2009 Product Description 3M 700-Series Hybrid Sealant and Hybrid Adhesive Sealant products are one component, moisture curing products which
More informationFIVE STAR PRODUCTS, INC. (800)
FIVE STAR PRODUCTS, INC. www.fivestarproducts.com (800) 243-2206 Page 1 of 11 DESIGN-A-SPEC GUIDELINES FIVE STAR RS ANCHOR GEL CONTENTS PART A - GENERAL CONDITIONS PART B - MATERIAL SPECIFICATIONS PART
More informationTopview 5630 Red SMD LED
Topview 5630 Red SMD LED 1. Features - Chip High-Luminosity SMD LED - 5.6 x 3.0 x 0.9 mm (L x W x H), 4-Pin, Small Size Surface Mount Type - Wide Viewing Angle - Long Operating Life - MSL 3 2. Applications
More informationCompact, Integrated System for Coating Pipe and Tubing
Dry Filter Continuous Coater Compact, Integrated System for Coating Pipe and Tubing Typical Coating Materials Used With Continuous Coaters Acrylics (clear and pigmented) Asphaltums Oleoresinous varnishes
More informationOptimizing the Assembly Process with Cure-On-Demand UV/Visible Light-Curable Adhesives
Optimizing the Assembly Process with Cure-On-Demand UV/Visible Light-Curable Adhesives Virginia P. Read Industrial Market Segment Manager DYMAX Corporation Torrington, CT www.dymax.com Introduction Manufacturers
More informationCOMPANY PROFILE HISTORY
COMPANY PROFILE HISTORY Ferrarini&Benelli srl has been involved in the field of corona surface treatment since 1965. The decision to take this direction resulted from the experience of Ezio Ferrarini and
More informationCOLD SOLVENT CLEANING AND STRIPPING OPERATIONS (Adopted & Effective 5/23/07) (2) Any cleaning of application equipment is not subject to this rule.
RULE 67.6.1 COLD SOLVENT CLEANING AND STRIPPING OPERATIONS (Adopted & Effective 5/23/07) (a) APPLICABILITY (1) Except as provided in Section (b), this rule is applicable to all cold solvent cleaning and
More informationMetallization deposition and etching. Material mainly taken from Campbell, UCCS
Metallization deposition and etching Material mainly taken from Campbell, UCCS Application Metallization is back-end processing Metals used are aluminum and copper Mainly involves deposition and etching,
More informationThis presentation is courtesy of
This presentation is courtesy of THE BENEFITS OF SILICONE FOAMS FOR USE IN THE AUTOMOTIVE INDUSTRY CREATING TOMORROW'S SOLUTIONS AGENDA Properties of silicone rubber Seal methods RTV-2 chemistries Condensation
More informationRAMPF Polymer Solutions GmbH & Co. KG Thilo Heuft / High performance reactive resins for component protection in extreme environments
RAMPF Polymer Solutions GmbH & Co. KG Thilo Heuft / 05.11.2015 High performance reactive resins for component protection in extreme environments The RAMPF Group RAMPF stands for Engineering and Chemical
More informationBLASTING TECHNICAL INFORMATION
BLAST FINISHING BLASTING TECHNICAL INFORMATION Blasting is the process where small angular or spherical particles are propelled at a part by compressed air, or mechanical high speed rotating wheels or
More informationTechnical Service. INSTALLATION INSTRUCTIONS FOR TARAFLEX SPORT PRODUCTS over Gypsum base Products. This document refers to the following products:
INSTALLATION INSTRUCTIONS FOR TARAFLEX SPORT PRODUCTS over Gypsum base Products This document refers to the following products: Product Width Width Ft. Installation direction Seams treatment Taraflex Surface
More informationProduct data sheet Palas Condensation particle counter UF-CPC 100
Product data sheet Palas Condensation particle counter UF-CPC 100 Applications Aerosol research Testing of filters and air purifiers Environmental measurements Workplace exposure and occupational safety
More information3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
More informationRAMPF Polymer Solutions GmbH & Co. KG Albert Schmid / Solutions for the lighting industry
RAMPF Polymer Solutions GmbH & Co. KG Albert Schmid / 19.03.2015 Solutions for the lighting industry Index 1. General Information 2. Fields of application: sealing 3. Fields of application: bonding 4.
More informationCORONA AND PLASMA TREATMENT
CORONA AND PLASMA TREATMENT AN OVERVIEW Page 2 of 28 Index Page 1. Introduction... 4 2. Measurement of treatment effect...... 4 3. Corona... 7 3.1. Principle of corona equipment... 7 3.2. Electrode systems...
More informationCoatings. Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition. Coatings on Optical Fibers
Anti-Reflection Custom Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition Anti-Reflection on Optical Fibers OptoSigma supplies a wide selection of optical
More informationUnderstanding the Basics of Electrocoat. Kelly Moore Development Chemist
Understanding the Basics of Electrocoat Kelly Moore Development Chemist Overview Why and When to Use Electrocoat How Does Electrocoat Work? Selecting the Right Electrocoat Technology The Future of Electrocoat
More informationSaws Dow Corning and Molykote Solutions for Home Appliances
Steam iron Oven Washing machine Dish washer Refrigerator Coffee pot Microwave oven Electric razor Vacuum cleaner Drills Saws Dow Corning and Molykote Solutions for Home Appliances Sealants & Lubricants
More information763.389.9475 www.erdmanautomation.com The Erdman 3M VHB Structural Glazing Tape Applicator, Frame Assembly & Glass Lay-in System Erdman 3M VHB Structural Glazing Tape Applicator, Frame Assembly and Glass
More informationThermoset Solutions for Fuel Cell Seals
Thermoset Solutions for Fuel Cell Seals Daniel Ramrus, Sr. Research Scientist, PhD. Daniel.Ramrus@ballard.com* Paul Kozak, R&D Manager, P. Eng., MBA. Paul.Kozak@ballard.com* Date of presentation: September
More informationRESILIENT FLOORING: Hot and Heavy - Secoya
160 South Industrial Blvd. Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Hot and Heavy - Secoya This document is intended as a suggested guide for editing your architectural guide specification.
More informationINTRODUCTION AND OVERVIEW OF MANUFACTURING. Manufacturing is Important. Manufacturing - Technologically Important
INTRODUCTION AND OVERVIEW OF MANUFACTURING 1. What is Manufacturing? 2. Materials in Manufacturing 3. Manufacturing Processes 4. Production Systems 5. Organization of the Book Manufacturing is Important
More informationTable of Contents. Robert A. Malloy. Plastic Part Design for Injection Molding. An Introduction ISBN:
Table of Contents Robert A. Malloy Plastic Part Design for Injection Molding An Introduction ISBN: 978-3-446-40468-7 For further information and order see http://www.hanser.de/978-3-446-40468-7 or contact
More informationControlling NOx and other Engine Emissions
Controlling NOx and other Engine Emissions Extensive Emissions Control Experience in Stationary Diesel and Natural Gas Engines Distributed Power Generation Cogeneration Plants (CHP) Gas Compression & Transmission
More informationCase Study Power Electronics Cleaning - Solvent to ph Neutral: Enhancing Safety, Process Efficiency and Productivity
Case Study Power Electronics Cleaning - Solvent to ph Neutral: Enhancing Safety, Process Efficiency and Productivity Ravi Parthasarathy, M.S.Ch.E. Senior Application Engineer ZESTRON Americas Outline Introduction
More informationJONIX MATE NON THERMAL PLASMA TECHNOLOGY
Food Technology JONIX MATE NON THERMAL PLASMA TECHNOLOGY MOBILE MEDICAL DEVICE FOR INDOOR AIR PURIFICATION AND DECONTAMINATION MADE IN ITALY TECNOLOGIA JONIX uses the advanced oxidation process to decontaminate
More informationCladding in the Field of Industrial Applications
Cladding in the Field of Industrial Applications Repair work with orbital welding equipment. Repair welding on the primary circuit of a nuclear power plant: a branch pipe is reconditioned by internal cladding
More informationAtmospheric plasma technology for surface modification of nanoparticles
9/16/2011 Atmospheric plasma technology for surface modification of nanoparticles Dirk Vangeneugden - COST Meeting, Espoo, Finland, 15-16/09/2011 Contents Introduction to VITO Developed atmospheric plasma
More informationCoating Specifications
Quadax Series Butterfly Valves Version May 2011 müller co-ax ag Gottfried-Müller-Str. 1 74670 Forchtenberg Germany Tel. +49 7947 828-0 Fax +49 7947 828-11 E-Mail info@co-ax.com Internet www.co-ax.com Table
More informationBEP Blue Barrier Installation and Application Guide
BEP Blue Barrier Installation and Application Guide BEP Blue Barrier is a system of seamless fluid applied products designed to protect the building envelope. Approved assemblies and applications listed
More informationThe illbruck Pocket Guide to The Complete Range of PU Foams
The illbruck Pocket Guide to The Complete Range of PU Foams 1 illbruck adds perfection... to all your sealing and bonding projects. Whether it be windows, façades, interiors or exteriors, a major construction
More informationIntroduction of CSC Pastes
Introduction of CSC Pastes Smart Phones & Conductive Pastes Chip Varistors Chip Inductors LC Filters Flexible Printed Circuit Boards Electronic Molding Compounds ITO Electrodes PCB Through Holes Semiconductor
More informationYOUR PROCESS IN GOOD HANDS
YOUR PROCESS IN GOOD HANDS Impregnation Plasma Hot riveting Automation 3 OUR AIM WE DO MORE THAN DISPENSING Dispensing Leading, comprehensible, all-embracing These are the values of and for the people
More information5W White SPHWHTA3N500
Product Family Data Sheet Rev. 00 2016.11.01 111 High Power LED Ceramic Series 5W White SPHWHTA3N500 Features & Benefits Package : Silicone covered ceramic substrate Dimension : 3.5 mm x 3.5 mm Technology
More informationHow to Select a Feeder
How to Select a Feeder To simplify we are using the term Parts as a general description covering parts, packages and materials. Part feeders come in many forms. These include vibratory bowls, inline feeders,
More informationUnderstanding Optical Coatings For Military Applications
Understanding Optical Coatings For Military Applications By Trey Turner, Chief Technology Officer, REO Virtually all optical components used in military applications, such as target designation, rangefinding
More informationAcrylic Structural Adhesives. Features and Recent Advancements
Acrylic Structural Adhesives Features and Recent Advancements 1 Structural adhesives can replace welding, bolts, screws, spot welding, and other traditional attachments in a wide variety of industrial
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data June, 2008 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationOur expertise your benefit. AE Available off the shelf.
Our expertise your benefit. AE Available off the shelf. 2 AE more benefits The whole is more than the sum of its parts The same is true of Rittal The System. With this in mind, we have bundled our innovative
More informationBEP Blue Barrier Installation and Application Guide
BEP Blue Barrier Installation and Application Guide BEP Blue Barrier is a system of seamless fluid applied products designed to protect the building envelope. Approved assemblies and applications listed
More informationApplications 4. Highlights 6. Machining envelope 8. The basic machine 12. Hightech-Spindle 13
MIKRON HPM 1850U 2 Contents Applications 4 Highlights 6 Machining envelope 8 The basic machine 12 Hightech-Spindle 13 Automation 14 Options 16 smart machine 17 GF AgieCharmilles 18 High performance milling
More informationSWARCO LIMBURGER LACKFABRIK GmbH Road Marking Systems LIMBOROUTE LW48 TECHNICAL INFORMATION
LIMBOROUTE LW48 TECHNICAL INFORMATION LIMBOROUTE LW48 Art.-No.: 11702 Airless, white Dispersions Dispersion paint Version: 2016-11-14 CONTENTS 1 Main characteristics / Fields of applications... 3 2 Technical
More informationReflow Oven. USA HEADQUARTERS:
AUTOMATION, SMT & LEAN MANUFACTURING www.ams-fa.com Reflow Oven USA HEADQUARTERS: 10030 Via de la Amistad, San Diego, CA 92154 Call: (619) 661.5985 Fax: (619) 661.5995 Email: ams@ams-fa.com BRAZIL Estrada
More informationQuality in Electronic Production has a Name: Viscom. System Overview
Quality in Electronic Production has a Name: Viscom System Overview Successful along the whole line with Viscom Circuit board manufacturing Paste print Finish S3070 AFI-Scan S3054QS Paste print Thick film
More informationPlastic Electronics Precise and productive automation solutions
Plastic Electronics Precise and productive automation solutions 2 Plastic Electronics Flexible electronics "off the roll" Today s electronics industry faces constant challenges as resource and energy costs
More informationSECTION RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection
SECTION 13090 RADIATION SHIELDING ENCLOSURE Low Intensity Radiation Protection Prepared by: 90 Dayton Avenue, Unit 4B, Suite 13 Passaic, NJ 07055 (973) 574-9077 13090-1 LOW INTENSITY RADIATION PROTECTION
More informationLecture Day 2 Deposition
Deposition Lecture Day 2 Deposition PVD - Physical Vapor Deposition E-beam Evaporation Thermal Evaporation (wire feed vs boat) Sputtering CVD - Chemical Vapor Deposition PECVD LPCVD MVD ALD MBE Plating
More informationPLAFORIZATION AND TORAN
Information about Plaforization and Toran - the one-step, room temperature, no sludge, and no waste systems for degreasing and passivating of metal surfaces. Prepared and presented by Mary T. Carpenter
More informationNitor Cross-Flow Filtration Systems Designed specifically for wine
Nitor Cross-Flow Filtration Systems Designed specifically for wine Nitor Cross-Flow filtration systems The Padovan NITOR Cross-Flow Filtration System was developed in 1989 as an answer to the growing issues
More informationMODEL 1051 TEM Mill ION MILLING. Ion milling is used on physical science. specimens to reduce thickness to electron
MODEL 1051 TEM Mill A state-of-the-art ion milling and polishing system offering reliable, high performance specimen preparation. It is compact, precise, and consistently produces high-quality transmission
More informationWE01A GMA (MIG) Plug Weld
Uniform Procedures For Collision Repair WE01A GMA (MIG) Plug Weld 1. Description This procedure describes methods for making and evaluating gas metal arc (GMA) plug welds (MIG plug welds) on all types
More informationJoining of Dissimilar Automotive Materials
Joining of Dissimilar Automotive Materials P.K. Mallick William E. Stirton Professor of Mechanical Engineering Director, Center for Lighweighting Automotive Materials and Processing University of Michigan-Dearborn
More informationThree-Dimensional Molded Interconnect Devices (3D-MID)
Jörg Frank Three-Dimensional Molded Interconnect Devices (3D-MID) Materials, Manufacturing, Assembly and Applica ons for Injec on Molded Circuit Carriers Sample Pages ISBN 978-1-56990-551-7 HANSER Hanser
More informationPioneering ALD experience since The ALD Powerhouse PRODUCT CATALOGUE FOR SUNALE P-SERIES ALD SYSTEMS
Pioneering ALD experience since 1974 The ALD Powerhouse PRODUCT CATALOGUE FOR SUNALE P-SERIES ALD SYSTEMS SUNALE P-SERIES ALD SYSTEMS PRODUCT CATALOGUE Description SUNALE P-series ALD system SUNALE P-series
More informationPLASTICS PROCESSING EQUIPMENT
2017 Product Catalog An Affiliate of Chant Engineering PLASTICS PROCESSING EQUIPMENT Innovative Solutions for these Industries Aerospace Automotive Appliance Composites Electrical Electronics Laboratory
More informationAdvances in Twin Screw Compounding Technology
Advances in Twin Screw Compounding Technology Extrusion technology from micro to production scale Ing. Manfred Dobersberger 19.08.2011 Labor- and Pilotanlagen für die Kunststoffverarbeitung, Dr. Collin
More information3M Fast Tack Water Based Adhesive 1000NF
Fast Tack Water Based Adhesive Technical Data September 2017 Product Description Key Features 3M Fast Tack Water Based Adhesive is a high performance water-based, one part adhesive formulated for fast
More informationSANY ASPHALT BATCHING PLANT
SANY ASPHALT BATCHING SANY Industry Town, Changsha Economic and Technological Development Zone, Hunan Province, China Service Line: +86 4006 098 318 E-mail: crd@sany.com.cn www.sanygroup.com Date: MAR
More information3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009
3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety
More informationProduct Data Sheet SikaFuko Swell-1 Positioning Description Uses Advantages Approval / Standards Construction Product Data Packaging
Product Data Sheet Version Nos.: 0414 SikaFuko Swell-1 Hydrophilic, swellable hose for sealing construction joints in watertight structures Construction Positioning Description Uses Swellable and injectable
More information3 Scotch-Weld TM. Instant Wood Adhesives and Surface Activator. Technical Data April, 2007
3 Scotch-Weld TM Technical Data April, 2007 Product Description 3M Scotch-Weld Instant Wood Adhesives and 3M Surface Activator are single component, room temperature-curing adhesives that provide remarkable
More informationConstruction. Hydrophilic, swellable hose for sealing construction joints in watertight structures. (formerly Sika Injectoflex HPM)
System Product Data Sheet Edition 06/12/2010 Identification no: 02 07 03 07 010 2 000099 (formerly Sika Injectoflex HPM) SikaFuko Swell 1 (formerly Sika Injectoflex HPM) Hydrophilic, swellable hose for
More informationWATERPROOFING CONSTRUCTION JOINTS
WaterproofingSystems WATERPROOFING CONSTRUCTION JOINTS Area waterproofing Backing rod KÖSTER Joint Sealant FS-H KÖSTER FS Primer 2C Contents Basics Connective, loadable and resilient: Joints in building
More information3 Scotch-Weld TM Flexible Epoxy Adhesive LSB90
3 Flexible Preliminary Technical Data Sheet February 2012 Product Description 3M TM is a high performance, two-part, flexible epoxy adhesive offering high shear and peel adhesion and very high levels of
More informationUVTOP280-FW-SMD. Description. Maximum Rating (T CASE = 25 C) Electro-Optical Characteristics (T CASE = 25 C, I F = 20 ma)
v2.0 11/2017 UVTOP280-FW-SMD Deep Ultraviolet Light Emission Source 285 nm, 2.0 mw 3535 Ceramic SMD Package Low Thermal Resistance Chemical and Biological Analysis Description UVTOP280-FW-SMD is a deep
More informationIMPLEMENTING PROPER PROCEDURES AND THE USE OF ADVANCED FLUX VERIFICATION TOOLS FOR A ROBUST WAVE SOLDERING OPERATION
IMPLEMENTING PROPER PROCEDURES AND THE USE OF ADVANCED FLUX VERIFICATION TOOLS FOR A ROBUST WAVE SOLDERING OPERATION Wojtek Antoniak 1 and Greg Hueste 2 1 Electronic Controls Design, Inc. Milwaukie, OR
More information1 Introduction. 2 Basic Technology
Innovative Clear Barrier Technology for the Packaging Industry Nicolas Schiller 1, Steffen Straach, Steffen Günther Fraunhofer FEP, Germany Alexandra L. Quiceno G., Antonio García Contreras BIOFILM, Columbia
More information32 Sq ft Kit Technical Data Sheet
HYDROCHROME 32 SQ FT KIT 32 Sq ft Kit Technical Data Sheet INTRODUCTION Hydrochrome is a very versatile product that, once applied, produces a 100% mirror effect which, will not dull down under a 2K topcoat.
More informationHANDTE VORTEX HANDTE VENTURI
HANDTE VORTEX HANDTE VENTURI Innovative applications through tried-and-proven technology: high performance 1 productive. SPEED HOW WE DO IT: AFETY SERVICE MISSION STATEMENT WHAT WE DO: We will clean dust,
More informationFrom Vacuum to Atmosphere and back an in-house Process Chain for Different Products
From Vacuum to Atmosphere and back an in-house Process Chain for Different Products Dr. Steffen Günther Vacuum coating low pressure 10-1 10-4 Pa (10-3 10-6 mbar) unhindered particle movement no unintended
More informationSupporting Information
Supporting Information Fast-Response, Sensitivitive and Low-Powered Chemosensors by Fusing Nanostructured Porous Thin Film and IDEs-Microheater Chip Zhengfei Dai,, Lei Xu,#,, Guotao Duan *,, Tie Li *,,
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes Technical Data January, 2002 Product Description 4004 1/4 in. (6.4 mm) Double-Coated Urethane Foam Tape 4008 1/8 in. (3.2 mm) Double-Coated Urethane Foam Tape 4016 1/16
More informationMRSI-175Ag Epoxy Dispenser
MRSI-175Ag Epoxy Dispenser Applications: Microwave & RF Modules MEMS Semiconductor Packaging Multi-Chip Modules Hybrid Circuits Optical Modules Overview The MRSI-175Ag Conductive Epoxy Dispenser handles
More informationLOCTITE 648 LOCTITE 638 LOCTITE 6300 LOCTITE 620. Is disassembly required? What service temperature is required? Up to 230 C.
Bonding No Gaps
More informationKGC SCIENTIFIC Making of a Chip
KGC SCIENTIFIC www.kgcscientific.com Making of a Chip FROM THE SAND TO THE PACKAGE, A DIAGRAM TO UNDERSTAND HOW CPU IS MADE? Sand CPU CHAIN ANALYSIS OF SEMICONDUCTOR Material for manufacturing process
More informationAutomated Machinery & Production Systems
Automated Machinery & Production Systems Success through Commitment In today s business environment, it s imperative that you remain as competitive as possible. Working with a strong partner that you can
More informationCompany Introduction. NOVATEC SRL Via Stra 4 I S. Martino di Lupari (PD) Tel Fax
NOVATEC SRL Via Stra 4 I - 35018 S. Martino di Lupari (PD) Tel. +39 049 9461077 Fax +39 049 9461600 e-mail: novatec@novatec.it - NOVATEC S.r.l. is a meaningful name, synonymous with design, production,
More informationStudio System CONSUMABLES HELP 3D PRINTER SUPPORT 3D PRINTER SALES
Studio System The Desktop Metal Studio System is the world s first affordable, office-friendly metal 3D printing system. Safe and simple to use, the Studio System was designed to bring metal 3D printing
More informationRESILIENT FLOORING: Select Step Wood
160 S. Industrial Blvd Calhoun, GA 30701 Section 096519 RESILIENT FLOORING: Select Step Wood This document is intended as a suggested guide for editing your architectural guide specification. Mohawk Group
More informationVacuum Plasma Deposition of Water and Oil Repellent Nano-coatings
Vacuum Plasma Deposition of Water and Oil Repellent Nano-coatings AIMCAL Web Coating & Handling Conference 2014 Europe Dr Nicholas Rimmer P2i 127 Olympic Avenue, Milton Park, Abingdon, Oxfordshire, OX14
More informationProducts PVC-ALU-WOOD
ducts PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-ALU-WOOD Products PVC-A Products PVC-ALU-WOOD PVC PROFILES Ideal 4000 02 5 chamber system 70 mm depth Uw
More informationHIGH TEMPERATURE CERAMIC & GRAPHITE ADHESIVES
HIGH TEMPERATURE & GRAPHITE S Technical Bulletin A2 Ceramabond 835-M bonds halogen lamp. Ceramabond 503 coats heater used to 1700 ºC. Ceramabond 685-N bonds infrared heater. Graphi-Bond 551-RN bonds graphite
More informationGRAVOTECH GROUP FIBRE LASER. Complete range of integrable laser marking systems LASER SOLUTION F-SERIES.
GRAVOTECH GROUP FIBRE LASER Complete range of integrable laser marking systems LASER SOLUTION F-SERIES www.technifor.com FIBRE LASER HIGH SPEED, CONTRAST AND PERMANENT MARKING Compact and robust, Technifor
More informationTECHNICAL DATA SHEET 1 P a g e Revised January 9, 2014
1 P age Revised January 9, 2014 TAIYO PSR-4000 CC01SE (UL Name: PSR-4000JV / CA-40JV) LIQUID PHOTOIMAGEABLE CURTAIN COAT SOLDER MASK Curtain Coat Application Aqueous Developing Solder Mask RoHS Compliant
More informationSpecial Electrically Resistant Heated Furnaces
Special Electrically Resistant Heated Furnaces Drying of Ceramic Components Autor: Roland Waitz, Malte Möller Many ceramic masses are fabricated in plastic or liquid condition by addition of water. In
More informationProperty Test/Standard Description
Approved 720 1,2 720 silicone acrylic ^(ValidationDate) 1 Product description This is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 C. Can be used as primer,
More information