Sustainability Report 2014

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Sustainability Report 2014"

Transcription

1 Metall Sustainability Report 2014 Diehl Metall Röthenbach

2 Contents Introduction 3 Brass Material Cycle 3 Environmental Goals and Measures 4 Energyefficiency 5 Watersupply and Wastewater 6 Air Pollution Control 7 Packaging Semi-finished Products 8 Waste/Waste Separation 9 Reach 11 Environmental Initiatives 11 2

3 Introduction Brass Material Cycle Smelting furnace (from top left), cast billets, bar and tube material, scrap The stringent requirements of our customers and the importance of quality, reliability and sustainability with respect to products guide our actions at Diehl Metall. Diehl Metall maintains open communication with authorities and the public. Protecting the environment and the health of our employees is always at the center of attention right from the initial product idea. The material used is subjected to intensive checks to fulfill the highest quality standards from the cast part to the finished product. Modern waste gas purification facilities ensure that the legal limit values are not merely observed but are significantly below them. The products are characterized by ecological safety. The production processes are environmentally friendly. As an important representative of copper materials, brass is characterized by a large array of properties and has become indispensable in daily life. Copper materials are environmentally sound, very valuable and are 100 % recyclable. Diehl Metall thus accepts all the chips and leftover pieces generated during further processing from our customers and feeds them back into the production process again. In this way, valuable raw materials are protected and approx % energy is saved compared to the primary process. This is due to the fact that when recycling copper, it is no longer necessary to consume the same level of energy that is associated with ore mining as well as with the processing and transport of ores and ore concentrates. Diehl Metall Röthenbach is certified according to the DIN EN ISO environmental management system and the DIN ISO energy management system. To safeguard and further develop attained goals, the energy and environmental management systems undergo regular checks by independent experts. 3

4 Environmental Goals and Measures In day-to-day work, the highest value is placed on energy efficiency and a caring approach to the environment. Idea management, an employee suggestion scheme and expert panels are established to identify savings and improvement measures. To uncover energy savings potential and check the effectiveness of the measures, a high level of transparency and good availability is required with respect to the consumption data. This is supported by energy management software. All production processes at Diehl are assessed with respect to their environmental effects. Assessment criteria include the type and volume of wastewater and waste, energy needs and emissions. From this assessment, measures may be derived, prioritized and implemented. Energy-saving measures Examples of measures undertaken recently include eliminating leakages in the compressed air system, exchanging the circulating pump in the boiler house, installing a new control system for the hydraulic unit of the indirect extrusion press for bar material, overhauling another hydraulic system, and the installation of energy-efficient illuminants in reflector lamps.these measures enabled approx. 300,000 kwh of electricity to be saved. 4 Measures for environmental protection To reduce noise, sections of the road on the company premises were renewed. Besides this, parts of the sewer system and the oil separator facilities were modernized.

5 Energy Efficiency 1999 until 2014 at the Röthenbach Location Energy use for the production of bar and tube material. Reference year 1999 = 100 % The consumption of electricity and natural gas has decreased by approx. 25 % over the past 10 years. To achieve this, existing facilities were modernized and investments made in new plant technology. Measures for increasing energy efficiency were implemented consistently. 5

6 Watersupply and Wastewater Wastewater treatment plant Water is supplied by the company s own well. The water is controlled regularly by an independent measuring institute. Wastewater from production is processed in a wastewater treatment plant and is directly discharged into the Pegnitz River. An in-house laboratory and the water authority carry out regular checks to ensure that the limit values are being adhered to. Wastewater discharge volumes in m³ 184, ,852 85,600 94,600 81,362 91,813 69,642 69,845 99, ,682 64,650 59,500 74, ,812 98,959 98, Sanitary wastewater Production wastewater

7 Air Pollution Control Exhaust stack of the dust extraction unit The dust generated during smelting and casting brass is extracted and retained in filter systems. Each year, 1.3 billion Nm³ of raw gases are extracted and filtered. The electricity requirement of the dust extraction unit amounts to 2.0 million kwh. Regular maintenance of the measuring equipment ensures that no faults occur. Emissions are monitored continuously. Measuring data of air pollutants: The limit value according to the Technical Instructions on Air Quality from 2002 amounts to 5 mg/m³ total dust content for cleaned exhaust gases. The total dust content in the cleaned exhaust gases was always below 1 mg/m³ and thus far beneath the legal limit value. Cyclone separator Filter chamber 7

8 Packaging Semi-finished Products Great importance is attached to reliable and environmentally sound packaging solutions. As far as possible, bars and tubes from semi-finished production are dispatched in wood packaging which can be used several times in circulation. Forgings supplied to the automotive industry are usually transported in reusable packaging. Automotive manufacturers have introduced a container management system. Other forgings are dispatched in returnable packaging such as pallet cages, wooden crates or plastic containers. For disposable packaging, cardboard and wood are used. These packaging materials can be easily recycled. 8

9 Waste/Waste Separation In-house recycling center Diehl Metall takes care to avoid waste with respect to auxiliary and operating materials during production processes. Where waste is unavoidable, the materials are recycled. By separating waste on a daily basis, all employees play their part. Waste is collected in the designated containers and properly disposed of. The goal is to avoid waste or else to reduce and recycle it. Recycling protects the environment and contributes to protecting resources. For this purpose, a recycling center was set up. In the recycling center, reusable waste is separated. Here, auxiliary production materials such as lubricoolants from machining, soap baths for tube drawing and the contents from oil separators are treated. Cardboard, straps and foil from packaging is compacted into bales by means of a press. This enables homogenous separation for recycling. The baling press reduces the waste volume, thereby decreasing the number of times waste needs to be transported by truck to the recycling plant. 9

10 Classifying waste Types of waste in t Grease Foil/Plastic Road sweepings Cleaning cloths/ Solvents Waste oil Waste paper Furnace linings Wood Industrial waste The waste recycling rate amounts to 97 %, i.e. almost all waste generated at Diehl is fed back into the reusable material cycle. Metallic production waste is recycled completely. Hazardous waste refers to waste which, due to its composition or nature, requires special monitoring and care during transport, storage and recycling. These materials are handled by trained specialists. During disposal and recycling of hazardous waste, Diehl Metall works with certified waste management facilities. 88 % of all waste generated at Diehl Metall is classified as non-hazardous. Checks are regularly carried out to determine whether materials can be replaced by more environmentally sound alternatives. Classifying waste Recycling/Disposal Hazardous/Non-Hazardous Disposal 3% 12% hazardous waste 10 Recycling 97% 88% non hazardous waste

11 Environmental Initiatives As an importer of copper and zinc, Diehl Metall has registered all important materials at the European Chemicals Agency (ECHA) under REACH. The alloys produced by Diehl Metall do not contain any materials which are classified as those of very high concern according to the REACH regulation and which are listed in Annex XIV of this regulation, which is known as the candidate list. We always keep an eye on this list, as it is continuously updated. In the event that the constituents of our products need to be taken up into the list, Diehl Metall would inform its customers along the supply chain and change its production process if necessary. Diehl Metall is a founding member of Metals pro Climate (Metalle pro Klima), an initiative of leading companies in the non-ferrous metal industry. In this initiative, the contributions which companies are making to climate protection are rendered transparent. Diehl Metall has published Best Practice examples from the areas of recycling, production and products on the website of Metals pro Climate. With its plant in Röthenbach, Diehl Metall participates in the Bavarian Environmental Package (Umweltpaket Bayern). The Bavarian Environmental Package is a voluntary agreement between the Bavarian government and Bavarian industry. At the forefront of the agreement is the conviction that the natural basis for life may be better protected with voluntary and reliable cooperation between state and industry than by laws and regulations alone. 11

12 Contact data: Diehl Metall Stiftung & Co. KG Heinrich-Diehl-Str. 9 D Röthenbach a.d. Pegnitz Contact partner: Dr. Claus Heubeck Environmental officer Diehl Metall Stiftung & Co. KG Tel V-Oe/11/2014/Au

Environmental Statement. Report Environmental Protection and Safety. Schaeffler Caldas Up date. Status October

Environmental Statement. Report Environmental Protection and Safety. Schaeffler Caldas Up date. Status October Environmental Statement Report Environmental Protection and Safety Schaeffler Caldas 214 Up date Status October 214 Introduction In the year 213 the environmental management at Schaeffler Portugal has

More information

To promote reuse and recycling of industrial wastewater and sludges from the Sewerage System; and

To promote reuse and recycling of industrial wastewater and sludges from the Sewerage System; and INDUSTRIAL-COMMERCIAL USER APPLICATION FOR PERMIT TO DISCHARGE AND WASTEWATER SURVEY MSD MSD USE ONLY ISSUED: 20 Metropolitan Sewerage District of Buncombe County, North Carolina Industrial & Commercial

More information

Zinc usage in the brass rod and related industry sectors MARCO CALAMIA

Zinc usage in the brass rod and related industry sectors MARCO CALAMIA Zinc usage in the brass rod and related industry sectors Metal Bulletin Zinc conference May 4-7, 2015 Helsinki, Finland MARCO CALAMIA Marco KME Calamia Group Head of Metal, KME Group, Italy 0 Who is KME

More information

Please take the time to complete the attached questionnaire and return the completed survey within thirty (30) days of receipt.

Please take the time to complete the attached questionnaire and return the completed survey within thirty (30) days of receipt. Date: Re: Industrial User Survey Dear Customer: The City of Dallas, Water Utilities Department, Pretreatment & Laboratory Services Division is required by the Environmental Protection Agency (EPA), the

More information

Greening Your Business

Greening Your Business Manager, Safety & Environmental Compliance Greening Your Business A look at Subaru of Indiana Automotive The Industry Leader in Environmental Stewardship Presented by: Denise Coogan SIA Model Lineup C

More information

Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING

Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Rolled billets FOR THE AUTOMOTIVE INDUSTRY, MINING, THE OIL AND GAS INDUSTRY AND GENERAL MECHANICAL ENGINEERING Buderus Edelstahl Buderus Edelstahl CONTENTS Buderus Edelstahl 2 Products 4 Production 5

More information

SIPAPER Reject Power. Environmental Product Declaration. Pulp and Paper Technologies

SIPAPER Reject Power. Environmental Product Declaration. Pulp and Paper Technologies SIPAPER Reject Power Environmental Product Declaration Pulp and Paper Technologies Environmental mission statement Design for environment Our knowledge and our solutions are helping to create a better

More information

Supplier self-information

Supplier self-information Page 1 of 5 GENERAL INFORMATION General corporate data Address: Legal form: Homepage: V.A.T. Registration No.: Group membership: Subsidiary companies: Ownership: Line of business: Contact person Name Phone

More information

Recycled Content & Certifications. Green Building Standards. Total 3 rd Party Recycled. Certifications Content

Recycled Content & Certifications. Green Building Standards. Total 3 rd Party Recycled. Certifications Content Cordia Receptacles are ergonomic, low maintenance and easy to disassemble. Wood insets are FSC 100% Jatoba hardwood with a natural oiled finish. Corrosion resistant aluminum insets have a low- or no- VOC

More information

General Packaging & Transport Documentation for suppliers

General Packaging & Transport Documentation for suppliers c:\users\topala\desktop\abteilungen\disposition\allgemeine verpackungsverordnung_1708engl.docx General Packaging & Transport Documentation for suppliers State: Version valid from 01.08.2017 Table of Contents

More information

Working with Specifiers Towards a Sustainable Built Environment

Working with Specifiers Towards a Sustainable Built Environment Working with Specifiers Towards a Sustainable Built Environment MANAGEMENT SYSTEMS HEALTH AND SAFETY 003 Our determination to continually develop new, exciting designs and innovative production methods

More information

1. General regulations

1. General regulations Page 1 von 1 1. General regulations 1.1 Parts shall be packaged by item. 1.2 The parts will be welded and powder-coated or galvanised at a later stage. The surfaces shall therefore be dry and free of paint,

More information

ENVIRON- MENTAL SUST AIN- ABILITY

ENVIRON- MENTAL SUST AIN- ABILITY ENVIRONMENTAL SUSTAINABILITY 3 environmental product certifications 65% average consumption of solvents under 65% with respect to the limits set forth by law per sq.m. of leather in 2015 91% of waste

More information

Shredders for Pallet Recycling

Shredders for Pallet Recycling Shredders for Pallet Recycling Table of contents Introduction...3 Possible end products...4 Considerations.. 5 Two-phase system 6-11 System diagram. 12 Brochures.. 13-17 Contact us...18 Pallets, pallets

More information

Pelletizing technologies for iron ore

Pelletizing technologies for iron ore Pelletizing technologies for iron ore The Outokumpu partnership As one of the world s leading developers and suppliers of technology, Outokumpu Technology designs and delivers plants, processes and equipment

More information

IN SAFE HANDS. Apparatus Construction Division EXPERTISE EXPERIENCE EXCELLENCE BORNE OF OFFERING YOU

IN SAFE HANDS. Apparatus Construction Division EXPERTISE EXPERIENCE EXCELLENCE BORNE OF OFFERING YOU Apparatus Construction Division IN SAFE HANDS EXPERTISE BORNE OF EXPERIENCE OFFERING YOU EXCELLENCE Knowhow and Leading Edge Technology for non-ferrous products made in Germany Since the company was founded

More information

ENGINEERING. Cokeless Cupola Furnaces. Economical and environmentally melting plants. Development Planning Realization

ENGINEERING. Cokeless Cupola Furnaces. Economical and environmentally melting plants. Development Planning Realization ENGINEERING Cokeless Cupola Furnaces Economical and environmentally melting plants Development Planning Realization Cokeless cupola furnaces from Düker over years of experience in iron casting The name

More information

Mega-Pack-System We make reusable foldable

Mega-Pack-System We make reusable foldable Mega-Pack-System We make reusable foldable www.faltbox.com 02 WALTHER Faltsysteme GmbH Our secret is in the fold In 1979, Walther Faltsysteme developed the first foldable multi-trip container. Since then,

More information

History of the plant

History of the plant N 1 History of the plant Plant Area: 190.000 m² Building Area : 110.000 m² 1934 Foundation of the Plant Hannover-Linden 1936 Foundation of the VAW Research-Center in Hannover Development of Continuously

More information

SUSTAINABLE DEVELOPMENT INDICATORS FOR THE ALUMINIUM INDUSTRY IN EUROPE

SUSTAINABLE DEVELOPMENT INDICATORS FOR THE ALUMINIUM INDUSTRY IN EUROPE SUSTAINABLE DEVELOPMENT INDICATORS FOR THE ALUMINIUM INDUSTRY IN EUROPE 2012 Key Facts and Figures Engaging for sustainable growth Note to the reader The European Aluminium Association (EAA) represents

More information

The Threat of Substitution and Raw Materials Efficiency of Materials to the Copper Scrap Market.

The Threat of Substitution and Raw Materials Efficiency of Materials to the Copper Scrap Market. The Threat of Substitution and Raw Materials Efficiency of Materials to the Copper Scrap Market www.diehl.com/metall 0 Content 1. Diehl Group 2. Diehl Metall 3. Diehl Metall in the Value Chain 4. Scrap

More information

BUILDING PRODUCT DECLARATION BPD 3 in compliance with the guidelines of the Ecocycle Council, June 2007

BUILDING PRODUCT DECLARATION BPD 3 in compliance with the guidelines of the Ecocycle Council, June 2007 BUILDING PRODUCT DECLARATION BPD 3 in compliance with the guidelines of the Ecocycle Council, June 2007 1 Basic data Product identification Product name Roof safety system - Color coated New declaration

More information

International SEMATECH Technology Transfer # A-TR

International SEMATECH Technology Transfer # A-TR Guidelines for International 300 mm Initiative (I300I) Environmental, Safety & Health (ESH) Equipment Specific Environmental Information and Environmental Impact SEMATECH and the SEMATECH logo are registered

More information

Product data sheet RESOPLAN HPL as per EN 438-6

Product data sheet RESOPLAN HPL as per EN 438-6 Product data sheet RESOPLAN HPL as per EN 438-6 This information describes the composition of RESOPAL boards and provides details on how to handle, process, use and dispose of them. RESOPLAN boards are

More information

Has the fall in copper price affected the dynamics of direct melt smelting?

Has the fall in copper price affected the dynamics of direct melt smelting? Has the fall in copper price affected the dynamics of direct melt smelting? Metal Bulletin Copper Recycling Conference June 15/17-6-2016 Munich MARCO CALAMIA Marco KME Calamia Group Head of Metal, KME

More information

F2. Vehicle and Heavy Equipment Repair and Maintenance

F2. Vehicle and Heavy Equipment Repair and Maintenance F2. Vehicle and Heavy Equipment Repair and Maintenance Commercial / Industrial / Institutional & Municipal Pollution Prevention Goal: Prevent or reduce the risk of discharge of pollutants to stormwater

More information

SIGNIFICANT ENVIRONMENTAL IMPROVEMENTS IN 2003

SIGNIFICANT ENVIRONMENTAL IMPROVEMENTS IN 2003 Environmental Review 2003 Outokumpu in brief The target of Outokumpu is to be the leading metals and technology Group that creates real value added for both its customers and shareholders. Our main strength

More information

Toxics Reduction Plan Copper

Toxics Reduction Plan Copper Prepared by: Goodrich Landing Gear Services 5415 Service Rd N, Burlington ON L7L 5H7 December 2013 Contents Statement of Intent... 2 2.0 Identification of Stages and processes... 4 3.0 Estimated Direct

More information

IRISH CEMENT PLATIN INVESTING IN OUR FUTURE

IRISH CEMENT PLATIN INVESTING IN OUR FUTURE IRISH CEMENT PLATIN INVESTING IN OUR FUTURE INTRODUCTION Investing in our future. The next phase of investment in Platin will see further energy efficiency improvements with on site electricity generation

More information

Metal Forming Process. Prof.A.Chandrashekhar

Metal Forming Process. Prof.A.Chandrashekhar Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which

More information

2013 UPS Corporate Sustainability Report: Supplemental Data

2013 UPS Corporate Sustainability Report: Supplemental Data 2013 UPS Corporate Sustainability Report: Supplemental Data Table of Contents Water.... 2 Effluents and Waste.... 3 Compliance... 5 Key Performance.... 7 Indicators About this document In 2013, UPS migrated

More information

Tips for Healthcare Sustainability

Tips for Healthcare Sustainability Tips for Healthcare Sustainability MnTAP overview Funded by the state (MPCA) since 1984 Located at the University of Minnesota 12 staff members, with backgrounds in engineering and science Free and non-regulatory

More information

Combustion Master CS Carbon and Sulphur Analyser

Combustion Master CS Carbon and Sulphur Analyser Combustion Master CS Carbon and Sulphur Analyser Combustion Master CS Carbon and Sulphur Analyser Analyser Stable metal housing Maintenance friendly design PC Controlled Analysis Loss-free data transfer

More information

Updated Environmental Statement Vöhringen Works

Updated Environmental Statement Vöhringen Works Updated Environmental Statement 2011 Vöhringen Works Validation certificate Environmental verifier's declaration on verification and validation activities The undersigned Thomas Schneider with EMAS environmental

More information

General Shipping and Packaging Instructions for Suppliers of NETZSCH Pumpen & Systeme GmbH in Waldkraiburg

General Shipping and Packaging Instructions for Suppliers of NETZSCH Pumpen & Systeme GmbH in Waldkraiburg General Shipping and Packaging Instructions for Suppliers of NETZSCH Pumpen & Systeme GmbH in Waldkraiburg 1. Aim and Purpose of the General Shipping and Packaging Instructions... 2 2. Delivery Address...

More information

Your defined goals and objectives:

Your defined goals and objectives: About us GECO GmbH was founded in 1977 as a private owned business by Josef Schlusche ( 2005). The company headquarters are located in Ketsch near Heidelberg. HOME Our customers: Administrative building

More information

6.1 Introduction to Wastewater Issues

6.1 Introduction to Wastewater Issues Section 6: Water Pollution This Section will help you: Understand if you generate industrial wastewater; Understand where your wastewater goes; Make sure you meet requirements for floor drains; Properly

More information

HORNOS Y METALES S.A

HORNOS Y METALES S.A HORNOS Y METALES S.A THE COMPANY I COMPANY HORNOS Y METALES S.A. FOUNDED 1988 BY MR. ANGEL AGUIRRE PASTO TURNOVER 8 MILLON EUROS IN 2011 30% SALES INCREASE SINCE 2009 MAJOR COMPLETED PROJECT 1,550.000

More information

ABEL Positive Displacement Pumps

ABEL Positive Displacement Pumps Membrane Pumps Solids Handling Pumps High Pressure Pumps Marine Pumps ABEL Positive Displacement Pumps Units for Process Engineering and optimal Solids Transport The International Experts ABEL Positive

More information

Emas Report 2008 Nokia plant

Emas Report 2008 Nokia plant Emas Report 28 Nokia plant As an authorised auditor, DNV Certification Oy Ab, FI-V-2 has, on 15 April, 29, stated that Nokian Tyres plc s environmental system and the 28 update of the EMAS report comply

More information

1. Definitions and classification of Metal forming processes

1. Definitions and classification of Metal forming processes 1. Definitions and classification of Metal forming processes 1.1 Introduction: Metal forming is a very important manufacturing operation. It enjoys industrial importance among various production operations

More information

Safe Disposal of Secondary Waste

Safe Disposal of Secondary Waste Safe Disposal of Secondary Waste The U.S. Army Chemical Materials Agency (CMA) works with federal and state environmental regulators to dispose of chemical weapons safely. An important part of CMA s work

More information

Powerful solutions to protect against corrosion and contamination - straight from the supplier.

Powerful solutions to protect against corrosion and contamination - straight from the supplier. Puma-Folien by W.Bosch+Co.: High quality protection for moisture-sensitive goods. Powerful solutions to protect against corrosion and contamination - straight from the supplier. Original quality, made

More information

Material Flow in Japan

Material Flow in Japan Material Flow in Japan 26 Ministry of the Environment Government of Japan Overview of the Material Flow in Japan The first step in building a sound material-cycle society is to understand the flows of

More information

Welcome to. The Gateway of Indian Drop Forging. An ISO 9001: 2008 Certified Company. Veraval Main Road, Veraval (Shapar) ,

Welcome to. The Gateway of Indian Drop Forging. An ISO 9001: 2008 Certified Company. Veraval Main Road, Veraval (Shapar) , Welcome to The Gateway of Indian Drop Forging An ISO 9001: 2008 Certified Company Veraval Main Road, Veraval (Shapar) 360024, Dist. Rajkot, Gujarat, India Phone no. : - +91 2827 252020/3030, Fax: - +91

More information

Schoeller Allibert Returnable Plastic Packaging Solutions. Pallets

Schoeller Allibert Returnable Plastic Packaging Solutions. Pallets Schoeller llibert Returnable Plastic Packaging Solutions Pallets 01 Table of contents Innovating your logistics for a better world 02 Introduction 04 Key benefits 06 Products in detail 18 ase study 20

More information

ENVIRONMENTAL PRODUCT DECLARATION as per ISO and EN 15804

ENVIRONMENTAL PRODUCT DECLARATION as per ISO and EN 15804 ENVIRONMENTAL PRODUCT DECLARATION as per ISO 1425 and EN 1584 Owner of the Declaration Program operator Publisher AFV Beltrame Group The International EPD System Institut Bauen und Umwelt e.v. (IBU) Declaration

More information

WASTEWATER DEPARTMENT CITY OF MANNHEIM

WASTEWATER DEPARTMENT CITY OF MANNHEIM WASTEWATER DEPARTMENT CITY OF MANNHEIM TABLE OF CONTENTS Key dates Locations und employees Organisation Distribution of staff Wastewater charges and expenses Expense distribution Sewage disposal Sewerage

More information

EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades

EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades Bundesvereinigung Deutscher Stahlrecycling- und Entsorgungsunternehmen e.v. EUROPEAN STEEL SCRAP SPECIFICATION Version: June 1 st 1995 General Conditions applicable to all grades As is pratically achievable

More information

ENVIRONMENTAL DECLARATION 2017 STEINBEIS PAPIER GMBH

ENVIRONMENTAL DECLARATION 2017 STEINBEIS PAPIER GMBH ENVIRONMENTAL DECLARATION 2017 STEINBEIS PAPIER GMBH CONTENT Foreword.... 1 Corporate profile... 2 Environmental policy. 7 Production process.. 10 Production concept. 12 Environmental results... 13 Environmental

More information

TiO 2 Chloride Process. Ti-Cons. Dr. Jendro and Partner - Jendro, Weiland and Partner Management Consultants

TiO 2 Chloride Process. Ti-Cons. Dr. Jendro and Partner - Jendro, Weiland and Partner Management Consultants Ti-Cons Dr. Jendro and Partner - Jendro, Weiland and Partner Management Consultants General Process Chloride Process (Base Material) Post-Treatment (TiO 2 Pigment) Page 2 Recycled Chlorine Ore, Coke Oxygen,

More information

Water 2. Compliance 5

Water 2. Compliance 5 UPS 2016 Corporate Sustainability Report Supplemental Data About This Document In 2016, UPS reported its annual Corporate Sustainability Report in accordance with the GRI Standards: Comprehensive option.

More information

ADVANTAGES OF VSG LUBRICATION OVER RETROFITTED "GREASELESS" BEARINGS

ADVANTAGES OF VSG LUBRICATION OVER RETROFITTED GREASELESS BEARINGS Providing Tribological Solutions 58 Garnock Avenue Toronto, ON, Canada M4K 1M2 Phone: 416 466-3144 toll free 888 442-5008 Fax: 416 466-3807 www.fluidcenter.com ADVANTAGES OF VSG LUBRICATION OVER RETROFITTED

More information

Green Stamp Certification Criteria for Printing Businesses

Green Stamp Certification Criteria for Printing Businesses Green Stamp Certification Criteria for Printing Businesses The Green Stamp program is a joint initiative of the Printing Industries Association of Western Australia and the Western Australian Department

More information

Wieland Components 2

Wieland Components 2 Wieland Components 2 Wieland Components Wieland-Werke AG is an innovative manufacturer of prefabricated components: Wieland Components The Complete Solution. Wieland is able to provide, on request, a complete

More information

THE INTEGRATED CX SYSTEM FROM SCRAP ACID BATTERIES TO SOFT LEAD AND LEAD ALLOYS

THE INTEGRATED CX SYSTEM FROM SCRAP ACID BATTERIES TO SOFT LEAD AND LEAD ALLOYS THE INTEGRATED CX SYSTEM FROM SCRAP ACID BATTERIES TO SOFT LEAD AND LEAD ALLOYS THE STEP BY STEP SOLUTION FOR LEAD RECLAMATION: STEP1 BATTERY BREAKER, SEPARATION AND COMPONENTS CLEANING STEP2 DESULPHURIZATION

More information

Legrand's environmental commitments

Legrand's environmental commitments Product Environmental Profile 128, Av. du Maréchal-de-Lattre-de-Tassigny 87045 Limoges cedex - France Tel: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 i Your usual Sales office Website: www.legrand.fr

More information

ESAB Marathon Pac TM total MIG/MAG efficiency

ESAB Marathon Pac TM total MIG/MAG efficiency ESAB total MIG/MAG efficiency Bulk wire systems for non and low-alloyed steel, stainless steel, aluminium and MAG brazing. STRENGTH THROUGH COOPERATION STRENGTH THROUGH COOPERATION ESAB - total MIG/MAG

More information

EXCELLENT PERSPECTIVES FOR THE IRANIAN ALUMINUM INDUSTRY

EXCELLENT PERSPECTIVES FOR THE IRANIAN ALUMINUM INDUSTRY GIIOVANNI NIGRIS EXECUTIVE VICE PRESIDENT DANIELI GROUP IIAC 2016 IRAN INTERNATIONAL ALUMINIUM CONFERENCE 11-12 MAY 2016 TEHRAN, IRAN EXCELLENT PERSPECTIVES FOR THE IRANIAN ALUMINUM INDUSTRY DANIELI /

More information

Providing Quality Forging Since 1931

Providing Quality Forging Since 1931 Providing Quality Forging Since 1931 ISO Certified since 1993 Story Composite Forgings Ltd. is an ISO 9001:2008 Certified open die forging company which meets the provisions of PED 97/23/ EC 7/2, Annex

More information

1. Identification of the substance/mixture and of the company/undertaking

1. Identification of the substance/mixture and of the company/undertaking Safety Data Sheet according to 1907/2006/EC, Article 31 Page 1/7 Revision 00 - May 2013 Iso Underfloor 1. Identification of the substance/mixture and of the company/undertaking - Comercial name: Iso Underfloor

More information

Reduce, Reuse, Recycle. Lesson Plan: NRES G1-1

Reduce, Reuse, Recycle. Lesson Plan: NRES G1-1 Reduce, Reuse, Recycle Lesson Plan: NRES G1-1 1 Anticipated Problems 1. What do reduce, reuse, and recycle mean? 2. Why is reducing, reusing, and recycling important? 2 Terms recycling reducing reusing

More information

Identification and evaluation of environmental aspects

Identification and evaluation of environmental aspects 1.0 Purpose This procedure defines the mechanism for the identification and evaluation of environmental aspects of the operations of KSPH&IDCL in order to determine those aspects that have actual or potential

More information

NON-TECHNICAL SUMMARY (Meltshop upgrading ABS Sisak d.o.o., Croatia)

NON-TECHNICAL SUMMARY (Meltshop upgrading ABS Sisak d.o.o., Croatia) 1. INTRODUCTION NON-TECHNICAL SUMMARY (Meltshop upgrading, Croatia) 1.1 A.B.S.- Sisak d.o.o. ABS Sisak is a Steel Factory located in Sisak, 50 km south of Zagreb, the capital of Croatia. The factory is

More information

Environmental Product Declaration. Long products of hot rolled structural non-alloy steel coming from electric furnace: ribbed bars.

Environmental Product Declaration.  Long products of hot rolled structural non-alloy steel coming from electric furnace: ribbed bars. www.aenor.es ECO PLATFORM EN 15804 Environmental Product Declaration Long products of hot rolled structural non-alloy steel coming from electric furnace: ribbed bars. Designation Code: ECO EPD Ref. nº:

More information

E500/E500A. Environmental Product Declaration According to ISO GIGASET. INSPIRING CONVERSATION.

E500/E500A. Environmental Product Declaration According to ISO GIGASET. INSPIRING CONVERSATION. Environmental Product Declaration According to ISO 14021 GIGASET. INSPIRING CONVERSATION. 2/11 1 Our enviromental mission We at Gigaset Communications GmbH* have a responsibility to society. Our convictions

More information

Environmental product declaration. KONE MonoSpace Special

Environmental product declaration. KONE MonoSpace Special Environmental product declaration KONE MonoSpace Special Environmental product declaration General information The Environmental Product Declaration (EPD) provides you as a KONE customer information on

More information

K&M STANDS FOR THE ENVIRONMENT GERMANY

K&M STANDS FOR THE ENVIRONMENT GERMANY K&M STANDS FOR THE ENVIRONMENT GERMANY 1 BLIDTEXT 1 FOR SATISFIED MUSICIANS König & Meyer, known for contemporary design, intelligent functionality, and exceptional longevity, has been a byword in the

More information

Surge arrester 3EB4. with polymeric composite housing for operating aboard traction units

Surge arrester 3EB4. with polymeric composite housing for operating aboard traction units Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders

More information

Updated Aurubis AG Environmental Statement 2015 Hamburg and Lünen Sites

Updated Aurubis AG Environmental Statement 2015 Hamburg and Lünen Sites Updated Aurubis AG Environmental Statement 2015 Hamburg and Lünen Sites Company portrait our business, our Business Units Company portrait Aurubis AG is a leading international integrated copper group

More information

Guangdong Provincial Green Freight Demonstration Project by Grant of GEF

Guangdong Provincial Green Freight Demonstration Project by Grant of GEF Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Grant Project of Global Environment Facility (GEF) Guangdong Provincial Green Freight

More information

CAROPLUS Self-lubricating

CAROPLUS Self-lubricating Self-lubricating Bearing Elements SELF-LUBRICATING BEARING ELEMENTS -Bearing Elements are maintenance-free, self-lubricating plain bearings, bearing plates, bearing and guiding pads as well as thrust washers,

More information

ENVIRONMENTAL PRODUCT DECLARATION as per ISO and EN 15804

ENVIRONMENTAL PRODUCT DECLARATION as per ISO and EN 15804 ENVIRONMENTAL PRODUCT DECLARATION as per ISO 14025 and EN 15804 Owner of the Declaration Programme holder Publisher Declaration number Issue date 10.04.2015 Valid to 09.04.2015 Institut Bauen und Umwelt

More information

Notification of Department of Industrial Works

Notification of Department of Industrial Works tification of Department of Industrial Works Subject: Type or category of factory required to prepare a report of type and quantity of pollutants discharged from a factory B.E. 2553 (2010) It is deemed

More information

FOUNDRY EQUIPMENT FOR THE FERROUS AND NON FERROUS METALS INDUSTRY

FOUNDRY EQUIPMENT FOR THE FERROUS AND NON FERROUS METALS INDUSTRY Ateco Impianti F O U N D R Y E Q U I P M E N T S FOUNDRY EQUIPMENT FOR THE FERROUS AND NON FERROUS METALS INDUSTRY VERTICAL CONTINUOUS AND SEMI-CONTINUOUS CASTING PLANTS COMPANY PROFILE Ateco was established

More information

Mini converter carbons and wastes for Biogas production and Energy Cogeneration model «ПТК-52»

Mini converter carbons and wastes for Biogas production and Energy Cogeneration model «ПТК-52» Mini converter carbons and wastes for Biogas production and Energy Cogeneration model «ПТК-52» Team: System processing of raw materials, thermochemical conversion reactor. Features: the team is a model

More information

CORNER TECHNICAL FEATURES

CORNER TECHNICAL FEATURES CORNER TECHNICAL FEATURES 04/2017 FIRST RECEPTION SEAT Backrest Inner metal structure covered by high density upholstered polyurethane injected foam Interior 11 mm steel rod Seat 16 mm thick inner particle

More information

Biomass Boiler Emission Abatement Technologies. Simon Wakefield

Biomass Boiler Emission Abatement Technologies. Simon Wakefield Biomass Boiler Emission Abatement Technologies Simon Wakefield simon.wakefield@hwenergy.co.uk About Us Established in 2003 Specialise only in biomass heating Team of 50 staff Design & engineering led company

More information

Chicago Faucets and Sustainability

Chicago Faucets and Sustainability Sustainability Chicago Faucets and Sustainability Chicago Faucets has been an industry leader in environmental responsibility. From our manual metering faucets to our incredibly dependable HyTronic electronic

More information

A LOOK INTO TRASH & RECYCLING SYSTEMS

A LOOK INTO TRASH & RECYCLING SYSTEMS A LOOK INTO TRASH & RECYCLING SYSTEMS Presentation created by Jamie Garuti, Sustainability Intern, Tulane Office of Sustainability and Environmental Studies, 2015. The Problem The combination of a growing

More information

1. Identification of the substance/preparation and of the company/undertaking

1. Identification of the substance/preparation and of the company/undertaking 1. Identification of the substance/preparation and of the company/undertaking Identification of the substance or preparation Use of the substance/preparation Grease Company/undertaking identification Auf

More information

KASTOspeed: High-Performance Automatic Circular Sawing Machines for Economical Cutting of Large Batches of Steel and Non-Ferrous Metals.

KASTOspeed: High-Performance Automatic Circular Sawing Machines for Economical Cutting of Large Batches of Steel and Non-Ferrous Metals. KASTOspeed: High-Performance Automatic Circular Sawing Machines for Economical Cutting of Large Batches of Steel and Non-Ferrous Metals. High-Performance at a Rapid Pace Fully Automatic Circular Saws,

More information

INDEPENDENT SCHOOL DISTRICT 199 Inver Grove Heights Community Schools th Street East Inver Grove Heights, Minnesota 55076

INDEPENDENT SCHOOL DISTRICT 199 Inver Grove Heights Community Schools th Street East Inver Grove Heights, Minnesota 55076 POLICY: 805 ADOPTED: 02/12/07 REVISED: 02/23/09 REVISED: 03/08/10 INDEPENDENT SCHOOL DISTRICT 199 Inver Grove Heights Community Schools 2990 80 th Street East Inver Grove Heights, Minnesota 55076 WASTE

More information

Building product declaration BASIC DATA. Document data. Roof transitions. Lindab Sverige AB. Article No/ID concept

Building product declaration BASIC DATA. Document data. Roof transitions. Lindab Sverige AB. Article No/ID concept Building product declaration 2015 according to BPD associations standardised format ebvd2015 1. BASIC DATA Document data Roof transitions Id: A-7300009-00795-0-73 Created: 2017-03-31 13:39:22 Version:

More information

Procedures for handling waste

Procedures for handling waste Recycling The colour of the containers can sometimes be different from the colour that the routine indicates. This is because there are sometimes a shortage of containers of a certain colour. However,

More information

AVANTIN and BERUCOOL Coolant Lubricants

AVANTIN and BERUCOOL Coolant Lubricants AVANTIN and BERUCOOL Coolant Lubricants AVANTIN and BERUCOOL Coolant Lubricants are all tailored to particular requirements by their special composition. The modern system structure of our water-miscible

More information

Environmental protection measures being undertaken by Messe Berlin and its subsidiaries

Environmental protection measures being undertaken by Messe Berlin and its subsidiaries Environmental protection measures being undertaken by Messe Berlin and its subsidiaries Messe Berlin is concerned that its actions should not have a negative environmental impact, while also seeking to

More information

TECHNOLOGY. E-COMPANY Holding, s.e., Europe

TECHNOLOGY. E-COMPANY Holding, s.e., Europe TECHNOLOGY E-COMPANY Holding, s.e., Europe With ZERO-EMISSION WASTE TREATMENT RECYCLING is guaranteed and total ENVIRONMENT is safeguarded COMBUSTIBLE is green and free BAT - Best Available Techniques

More information

Optimisation of disposal logistics. BaleTainer Fully Automatic. Comfortable. Reliable. Economical disposal of cardboard, film and PET bottles.

Optimisation of disposal logistics. BaleTainer Fully Automatic. Comfortable. Reliable. Economical disposal of cardboard, film and PET bottles. BaleTainer Fully Automatic. Comfortable. Reliable. Economical disposal of cardboard, film and PET bottles. Optimisation of disposal logistics 1 3 4 2 The operating principle The material can be inserted

More information

TOTAL WATER MANAGEMENT IN THE STEEL INDUSTRY. By N. Ramachandran, Ion Exchange (India) Ltd

TOTAL WATER MANAGEMENT IN THE STEEL INDUSTRY. By N. Ramachandran, Ion Exchange (India) Ltd TOTAL WATER MANAGEMENT IN THE STEEL INDUSTRY By N. Ramachandran, Ion Exchange (India) Ltd Large quantities of water are required to produce steel and steel products - typically 180-200 m 3 of water per

More information

STEELMAKING. New standards in productivity, quality and efficiency

STEELMAKING. New standards in productivity, quality and efficiency STEELMAKING New standards in productivity, quality and efficiency SMS CONCAST A technology powerhouse Expertise and experience, reliability and flexibility these are the hallmarks of SMS Concast. This

More information

Energy saving Opportunities in Steel Reheating Furnaces

Energy saving Opportunities in Steel Reheating Furnaces Energy saving Opportunities in Steel Reheating Furnaces S. M. Ahuja Associate Professor, Department of Chemical Technology, Sant Longowal Institute of Engineering and Technology, Longowal, Sangrur, Punjab,

More information

AQUATEK rainwater harvesting systems can reduce mains water consumption in the average domestic dwelling by up to 50%."

AQUATEK rainwater harvesting systems can reduce mains water consumption in the average domestic dwelling by up to 50%. RAINWATER HARVESTING SYSTEMS Aquatek rainwater harvesting systems capture and store rainwater from roofs allowing it to be reused around the house or building for supplying water to flush toilets, wash

More information

EconPlast. Spritzgiessautomaten

EconPlast. Spritzgiessautomaten Spritzgiessautomaten The proper response to rising electricity prices is energy efficiency Annegret-Cl. Agricola / Department Head of the German Energy Agency It requires considerable amounts of energy

More information

Experience In Motion. SIHI Gas separation by using membranes

Experience In Motion. SIHI Gas separation by using membranes Experience In Motion SIHI Gas separation by using membranes Pump Supplier to the World 2 Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has

More information

Tompkins County Solid Waste Management Plan Executive Summary

Tompkins County Solid Waste Management Plan Executive Summary Tompkins County Solid Waste Management Plan Executive Summary Tompkins County has prepared a comprehensive, twenty-year Solid Waste Management Plan to comply with the requirements of the Solid Waste Management

More information

COOLANT SYSTEMS, EXHAUST AIR CLEANING SYSTEMS and COMPONENTS

COOLANT SYSTEMS, EXHAUST AIR CLEANING SYSTEMS and COMPONENTS COOLANT SYSTEMS, EXHAUST AIR CLEANING SYSTEMS and COMPONENTS SMS group HOT and COLD ROLLING MILLS ROLL COOLANT-, ROLLING OIL- and FILTRATION SYSTEMS SMS SIEMAG Roll Coolant-, Rolling Oil- and Filtration

More information

AMETAL AMETAL AMETAL APPLICATIONS GENERAL

AMETAL AMETAL AMETAL APPLICATIONS GENERAL AMETAL - TA S DEZINCIFICATION RESISTANT COPPER ALLOY AMETAL is a patented special copper alloy, combining excellent corrosion resistance with high mechanical strength. 1 AMETAL TA s dezincification-resistant

More information

Country Questionnaire Prior to the Senior Officials Meeting on the 3R Initiative - INDIA -

Country Questionnaire Prior to the Senior Officials Meeting on the 3R Initiative - INDIA - Country Questionnaire Prior to the Senior Officials Meeting on the 3R Initiative - INDIA - [Country Questionnaire Survey] 1. Major developments regarding the strategies, policies and activities on the

More information

TYPES, AMOUNTS AND EFFECTS OF INDUSTRIAL SOLID

TYPES, AMOUNTS AND EFFECTS OF INDUSTRIAL SOLID TYPES, AMOUNTS AND EFFECTS OF INDUSTRIAL SOLID WASTES Jinhui Li Department of Environmental Science and Engineering, Tsinghua University, Beijing, China Keywords: Solid waste, hazardous waste, industrial

More information