Balco, Inc. Stair Nosings
|
|
- Giles Beasley
- 6 years ago
- Views:
Transcription
1 Balco, Inc. Stair Nosings Applicable Rating Systems: CI - Commercial Interiors RETAIL CI - Retail, Commercial Interiors Balco, Inc. Stair Nosings Contributes to LEED Credits Zero maintenance, reducing overhead costs Non-Radioactive; Non-toxic, Contains no Lead, Zero VOCs Recyclable Content Aestetically-pleasing designs Improves Safety and Reduces Liability Balco, Inc. Aluminum Stair Nosings are manufactured using post-consumer and pre-consumer recycled content; Made In The USA Balco, Inc. Stair Nosings may contribute toward credit for LEED points in the following categories: Energy & Atmosphere: EA Credit 1.4: Optimize Energy Performance Equipment and Appliances 1+ point For all ENERGY STAR eligible equipment and appliances installed as part of the tenant s scope of work, achieve one of the following percentages (by rated power). Equipment that meets the same requirements as ENERGY STAR qualified products but does not bear the ENERGY STAR label is acceptable. Projects outside the U.S. may use a local equivalent to ENERGY STAR. Only Balco, Inc. Photoluminescent Stair Nosings may qualify for this credit. Materials and Resources: MR Credit 2: Construction Waste Management 1-2 points Recycled or Salvaged Points 50% 1 75% 2 Aluminum and bronze used in Balco, Inc. Stair Nosings are 100% recyclable. Any trimmed material and drop can be recycled. MR Credit 3.1: Materials Reuse 1-2 points Use salvaged, refurbished or reused materials, the sum of which constitutes at least 5% or 10%, based on cost, of building (construction) materials, excluding furniture and furnishings The minimum percentage materials reused for each point threshold is as follows: Reused Materials Points 5% 1 10% 2 Balco, Inc. Stair Nosings (retrofit) may be salvaged and re-used. Products purchased for use in the project are not eligible for this credit at the time of purchase. This is a future consideration S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316)
2 MR Credit 4: Recycled Content 1-2 points Use materials, including furniture and furnishings, with recycled content such that the sum of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least 10% or 20% based on cost of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows: Recycled Content Points 10% 1 20% 2 Balco, Inc. Aluminum Stair Nosings contain qualifying recycled content. MR Credit 5: Regional Materials 1-2 points (Option 1) Use a minimum of 20% of the combined value of construction and Division 12 (Furniture) materials and products that are manufactured regionally within a 500 mile (800 kilometer) total travel distance of the project site using a weighted average determined through the following formula: (Distance by rail/3) + (Distance by inland waterway/2) + (Distance by sea/15) + (Distance by all other means) < 500 miles [800 kilometers]. (OPTION 2) Meet the requirements for Option 1. AND Use a minimum of 10% of the combined value of construction and Division 12 (Furniture) materials and products extracted, harvested or recovered, as well as manufactured regionally within a 500 mile (800 kilometer) total travel distance of the project site using a weighted average determined through the following formula: (Distance by rail/3) + (Distance by inland waterway/2) + (Distance by sea/15) + (Distance by all other means) 500 miles [800 kilometers]. Balco, Inc. Stair Nosings are manufactured in Wichita, Kansas. Innovation in Design: ID Credit 1: Innovation in Design 1 point Credit can be achieved through any combination of the Innovation in Design and Exemplary Performance paths asdescribed below: PATH 3. Pilot Credit (1 point) Attempt a pilot credit available in the Pilot Credit Library at Register as a pilot credit participant and complete the required documentation. Projects may pursue more than 1 pilot credit; however, a maximum of 1 point will be awarded. Pilot Credit 54: Avoidance of Chemicals of Concern Use a minimum of 20%, by cost, of at least 3 building product and material types meeting one of the options below. Chemical Avoidance Option 1: Avoidance Use third party certified building products and materials that do not contain intentionally added substances present in the end product over the reporting thresholds below. Calculate compliant building products and materials at cost. Substance Allowed Concentration Lead and lead compounds Mercury Cadmium Anitmony Hexavalent Chromium Perfluorinated Compounds (PFCs) Carcinogens listed in California s Proposition 65 Page 2 of 3; SN-CI
3 Substance For projects outside the U.S. additionally avoid carcinogens listed on the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) substances of very high concern (SVHC) Candidate List Allowed Concentration Under levels that would trigger notification Balco, Inc. Photoluminescent Stair Nosings, aluminum extrusion and photoluminescent strip, contain none of the Chemicals listed in Option 1 of Pilot Credit 54. Stair Nosings with abrasive do not qualify for this credit. Contact Balco, Inc. to learn more about LEED and how Balco, Inc. products can contribute to your project goals: Balco, Inc S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316) Page 3 of 3; SN-CI
4 Balco, Inc. Stair Nosings Applicable Rating Systems: EBOM - Existing Buildings Operations AND Maintenance Balco, Inc. Stair Nosings Contributes to LEED Credits Zero maintenance, reducing overhead costs Non-Radioactive; Non-toxic, Contains no Lead, Zero VOCs Recyclable Content Aestetically-pleasing designs Improves Safety and Reduces Liability Balco, Inc. Aluminum Stair Nosings are manufactured using post-consumer and pre-consumer recycled content; Made In The USA Balco, Inc. Stair Nosings may contribute toward credit for LEED points in the following categories: Energy & Atmosphere: EA Credit 1: Optimize Energy Perforomance 1+ point Refer to the published Rating System document or the Summaries Section of the Balco, Inc. LEED Spreadsheet for additional information regarding this credit (1-18 points). Only Balco, Inc. Photoluminescent Stair Nosings may qualify for this credit. Materials and Resources: MR Credit 3: Sustainable Purchasing--Facility Alterations and Additions 1 point Maintain a sustainable purchasing program covering materials for facility renovations, demolitions, refits and new construction additions. This applies only to base building elements permanently or semipermanently attached to the building itself. Materials considered furniture, fixtures and equipment (FF&E) are not considered base building elements and are excluded from this credit. Purchases contain at least 10% post-consumer and/or 20% post-industrial material. Balco, Inc. Aluminum Stair Nosings contain significant post-consumer recycled content. MR Credit 9: Solid Wast Management--Facility Alterations and Additions 1 point Divert at least 70% of waste (by volume) generated by facility alterations and additions from disposal to landfills and incineration facilities. This applies only to base building elements permanently or semipermanently attached to the building itself that enter the waste stream during facility renovations, demolitions, refits and new construction additions. Base building elements include at a minimum, building components and structures (wall studs, insulation, doors, windows), panels, attached finishings (drywall, trim, ceiling panels), carpet and other flooring material, adhesives, sealants, paints and coatings. Furniture, fixtures and equipment (FF&E) are not considered base building elements and are excluded from this credit. Mechanical, electrical and plumbing components and specialty items such as elevators are also excluded. Balco, Inc. Stair Nosings (aluminum or bronze components) are 100% recyclable S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316)
5 Innovation in Operations: IO Credit 1: Innovation in Operations 1 point Credit can be achieved through any combination of the Innovation in Operations and Exemplary Performance paths as described below: PATH 3. Pilot Credit (1-4 points) Attempt a pilot credit available in the Pilot Credit Library at Register as a pilot credit participant and complete the required documentation. Projects may pursue up to 4 Pilot Credits total. Pilot Credit 54: Avoidance of Chemicals of Concern Use a minimum of 20%, by cost, of at least 3 building product and material types meeting one of the options below. Chemical Avoidance Option 1: Avoidance Use third party certified building products and materials that do not contain intentionally added substances present in the end product over the reporting thresholds below. Calculate compliant building products and materials at cost. Substance Allowed Concentration Lead and lead compounds Mercury Cadmium Anitmony Hexavalent Chromium Perfluorinated Compounds (PFCs) Carcinogens listed in California s Proposition 65 For projects outside the U.S. additionally Under levels that would avoid carcinogens listed on the trigger notification Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) substances of very high concern (SVHC) Candidate List Balco, Inc. Photoluminescent Stair Nosings, extrusion and Photoluminescent Strip, contain none of the Chemicals listed in Option 1 of Pilot Credit 54. Balco, Inc. Stair Nosings having abrasive do not qualify for this credit. Contact Balco, Inc. to learn more about LEED and how Balco, Inc. products can contribute to your project goals: Balco, Inc S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316) Page 2 of 2; SN-EB
6 Balco, Inc. Stair Nosings Applicable Rating Systems: HC - Healthcare Balco, Inc. Stair Nosings Contributes to LEED Credits Zero maintenance, reducing overhead costs Non-Radioactive; Non-toxic, Contains no Lead, Zero VOCs Recyclable Content Aestetically-pleasing designs Improves Safety and Reduces Liability Balco, Inc. Aluminum Stair Nosings are manufactured using post-consumer and pre-consumer recycled content; Made In The USA Balco, Inc. Stair Nosings may contribute toward credit for LEED points in the following categories: Energy & Atmosphere: EA Credit 1: Optimize Energy Performance 1+ point Demonstrate a percentage improvement in the proposed building performance rating compared with the baseline building performance rating. Calculate the baseline building performance according to Appendix G of ANSI/ASHRAE/IESNA Standard (with errata but without addenda) using a computer simulation model for the whole building project. Projects outside the U.S. may use a USGBC approved equivalent standard. The minimum energy cost savings percentage for each point threshold is provided in the published Rating System document or the Summaries Section of the Balco, Inc. LEED Spreadsheet (1-24 points). Please refer to these for additional information regarding this credit. Only Balco, Inc. Photoluminescent Stair Nosings may qualify for this credit. Materials and Resources: MR Credit 2: Construction Waste Management 1-2 points Recycled or Salvaged Points 50% 1 75% 2 Aluminum and bronze used in Balco, Inc. Stair Nosings are 100% recyclable. Any trimmed material and drop can be recycled. MR Credit 3: Sustainably Sourced Materials and Products 1-4 points One point and up to a maximum of four will be awarded for each 10% of the total value of all building materials and products used in the project (based on cost) that meet the criteria below. If concrete or steel structural elements are applied toward this credit, the project must include at least two other materials or products from CSI MasterFormat Divisions (other than 03 and 05) to attain the first point. Of the total recycled content, no more than 75% may be steel or concrete. 1. The cost of any individual material or product may be added for each of the following sustainability criteria that the material or product meets: 2626 S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316)
7 Salvaged, refurbished or reused materials. OR Recycled content. The recycled content value is determined by multiplying the recycled content fraction of the assembly (based on weight) by the cost of the assembly. The recycled content fraction is the sum of all post-consumer1 recycled content plus one-half of the pre-consumer2 content. Note: The same material cannot contribute to both salvaged and recycled content values. OR Regionally sourced/manufactured materials and products that have been extracted, harvested or recovered, as well as manufactured within 500 miles (800 kilometers) of the project site. OR Building materials or products shipped by rail or water have been extracted, harvested or recovered, as well as manufactured within a 500 mile (800 kilometer) total travel distance of the project site using a weighted average determined through the following formula: (Distance by rail/3) + (Distance by inland waterway/2) + (Distance by sea/15) + (Distance by all other means) <500 miles [800 kilometers] AND 2. Wall, ceiling and flooring systems and finishes, composite wood, agrifiber and fiberglass products, both exterior and interior adhesives, sealants, coatings, roofing, and waterproofing products must meet the relevant IEQ Credit 4: Low-Emitting Materials requirements to contribute toward the credit. AND Mechanical, electrical and plumbing components and specialty items, such as elevators, shall not be included in this calculation. Only include materials permanently installed in the project. Furniture is not included (see Credit ). Recycled content shall be defined in accordance with the International Organization of Standards Document ISO Environmental labels and declarations Self-declared environmental claims (Type II environmental labeling). Balco, Inc. Stair Nosings, manufactured using aluminum extrusions, contain significant recycled content, both post-consumer and post-industrial, and are eligible for this credit, provided the other criteria of the credit not directly related to the stair nosings are met. Innovation in Design: ID Credit 1: Innovation in Design 1 point Credit can be achieved through any combination of the Innovation in Design and Exemplary Performance paths asdescribed below: PATH 3. Pilot Credit (1 point) Attempt a pilot credit available in the Pilot Credit Library at Register as a pilot credit participant and complete the required documentation. Projects may pursue more than 1 pilot credit; however, a maximum of 1 point will be awarded. Pilot Credit 54: Avoidance of Chemicals of Concern Use a minimum of 20%, by cost, of at least 3 building product and material types meeting one of the options below. Chemical Avoidance Option 1: Avoidance Use third party certified building products and materials that do not contain intentionally added substances present in the end product over the reporting thresholds below. Calculate compliant building products and materials at cost. Substance Allowed Concentration Lead and lead compounds Mercury Cadmium Anitmony Page 2 of 3; SN-HC
8 Substance Hexavalent Chromium Perfluorinated Compounds (PFCs) Carcinogens listed in California s Proposition 65 For projects outside the U.S. additionally avoid carcinogens listed on the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) substances of very high concern (SVHC) Candidate List Allowed Concentration Under levels that would trigger notification Balco, Inc. Photoluminescent Stair Nosings, aluminum extrusion and photoluminescent strip, contain none of the Chemicals listed in Option 1 of Pilot Credit 54. Stair Nosings with abrasive do not qualify for this credit. Contact Balco, Inc. to learn more about LEED and how Balco, Inc. products can contribute to your project goals: Balco, Inc S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316) Page 3 of 3; SN-HC
9 Balco, Inc. Stair Nosings Applicable Rating Systems: NC - New Construction CS - Core & Shell RETAIL NC - Retail, New Construction Balco, Inc. Stair Nosings Contributes to LEED Credits Zero maintenance, reducing overhead costs Non-Radioactive; Non-toxic, Contains no Lead, Zero VOCs Recyclable Content Aestetically-pleasing designs Improves Safety and Reduces Liability Balco, Inc. Aluminum Stair Nosings are manufactured using post-consumer and pre-consumer recycled content; Made In The USA Balco, Inc. Stair Nosings may contribute toward credit for LEED points in the following categories: Energy & Atmosphere: EA Credit 1: Optimize Energy Performance 1+ points Select 1 of the 3 compliance path options. Project teams documenting achievement using any of the 3 options are assumed to be in compliance with EA Prerequisite 2: Minimum Energy Performance. Refer to the published Rating System document or the Summaries Section of the Balco, Inc. LEED Spreadsheet for additional information regarding this credit (1-19 points). Only Balco, Inc. Photoluminescent Stair Nosings may qualify for this credit. Materials and Resources: MR Credit 2.1: Construction Waste Management: Divert 50% From Disposal 1 point Aluminum and bronze used in the manufacture of Balco, Inc. Stair Nosings are 100% recyclable. Any trimmed material and drop can be recycled. MR Credit 2.2: Construction Waste Management: Divert 75% From Disposal 1 point Aluminum and bronze used in the manufacture of Balco, Inc. Stair Nosings are 100% recyclable. Any trimmed material and drop can be recycled. MR Credit 3.1: Material Reuse 5% 1 point Low or no maintenance Balco, Inc. Stair Nosings (retrofit) may allow reuse of the products after removal from a building being demonlished and/or replaced, contributing to this credit. Products purchased for use in the project are not eligible for this credit at the time of purchase. This is a future consideration S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316)
10 MR Credit 3.2: Material Reuse 10% 1 point Low or no maintenance Balco, Inc. Stair Nosings (retrofit) may allow reuse of the products after removal from a building being demonlished and/or replaced, contributing to this credit. Products purchased for use in the project are not eligible for this credit at the time of purchase. This is a future consideration. MR Credit 4.1: Recycled Content: 10% (post-consumer + pre-consumer) 1 point Balco, Inc. Aluminum Stair Nosings are manufactured using significant recycled content, both post-consumer and pre-consumer. Contact Balco, Inc. for current recycled content percentages. MR Credit 4.2: Recycled Content: 20% (post-consumer + pre-consumer) 1 point Balco, Inc. Aluminum Stair Nosings are manufactured using significant recycled content, both post-consumer and pre-consumer. Contact Balco, Inc. for current recycled content percentages. MR Credit 5.1: Regional Materials 10% Extracted, Processed & Manufactured Regionally 1 point Encourage the use of products and materials that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site for a minimum of 10% (based on cost) of the total materials value. If only a fraction of a product or material is extracted/harvested/recovered and manufactured locally, then only that percentage (by weight) shall contribute to the regional value. While materials used in the manufacture of Balco, Inc. Stair Nosings may be processed and manufactured within the 500 mile radius, raw materials may have been extracted at a variety of sites globally, It may not be possible to determine extraction sites with any certainty. Therefore, Balco, Inc. cannot guarantee that the products will contribute to this credit. MR Credit 5.2: Regional Materials 20% Extracted, Processed & Manufactured Regionally 1 point Encourage use of materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site for an additional 10% beyond MR Credit 5.1 (total of 20%, based on cost) of the total materials value. If only a fraction of the material is extracted/harvested/ recovered and manufactured locally, then only that percentage (by weight) shall contribute to the regional value. While materials used in the manufacture of Balco, Inc. Stair Nosings may be processed and manufactured within the 500 mile radius, raw materials may have been extracted at a variety of sites globally, It may not be possible to determine extraction sites with any certainty. Therefore, Balco, Inc. cannot guarantee that the products will contribute to this credit. Innovation in Design: ID Credit 1: Innovation in Design 1 point Credit can be achieved through any combination of the Innovation in Design and Exemplary Performance paths asdescribed below: PATH 3. Pilot Credit (1 point) Attempt a pilot credit available in the Pilot Credit Library at Register as a pilot credit participant and complete the required documentation. Projects may pursue more than 1 pilot credit; however, a maximum of 1 point will be awarded. Pilot Credit 54: Avoidance of Chemicals of Concern Use a minimum of 20%, by cost, of at least 3 building product and material types meeting one of the options below. Chemical Avoidance Option 1: Avoidance Use third party certified building products and materials that do not contain intentionally added substances present in the end product over the reporting thresholds below. Calculate compliant building products and materials at cost. Page 2 of 3; SN-NC
11 Substance Lead and lead compounds Mercury Cadmium Anitmony Hexavalent Chromium Perfluorinated Compounds (PFCs) Carcinogens listed in California s Proposition 65 For projects outside the U.S. additionally avoid carcinogens listed on the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) substances of very high concern (SVHC) Candidate List Allowed Concentration Under levels that would trigger notification Balco, Inc. Photoluminescent Stair Nosings, aluminum extrusion and photoluminescent strip, contain none of the Chemicals listed in Option 1 of Pilot Credit 54. Stair Nosings with abrasive do not qualify for this credit. Contact Balco, Inc. to learn more about LEED and how Balco, Inc. products can contribute to your project goals: Balco, Inc S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316) Page 3 of 3; SN-NC
12 Balco, Inc. Stair Nosings Applicable Rating Systems: SCH - Schools Balco, Inc. Stair Nosings Contributes to LEED Credits Zero maintenance, reducing overhead costs Non-Radioactive; Non-toxic, Contains no Lead, Zero VOCs Recyclable Content Aestetically-pleasing designs Improves Safety and Reduces Liability Balco, Inc. Aluminum Stair Nosings are manufactured using post-consumer and pre-consumer recycled content; Made In The USA Balco, Inc. Stair Nosings may contribute toward credit for LEED points in the following categories: Energy & Atmosphere: EA Credit 1: Optimize Energy Performance 1+ point Select 1 of the 3 compliance path options described in the LEED Rating System document or in the Balco, Inc. Spreadsheet credit summaries. Project teams documenting achievement using any of the 3 options are assumed to be in compliance with EA Prerequisite 2: Minimum Energy Performance. Please refer to the appropriate LEED Rating System document or the Balco, Inc. Spreadsheet credit summaries or additional information (1-19 points). Only Balco, Inc. Photoluminescent Stair Nosings may qualify for this credit. Materials and Resources: MR Credit 2: Construction Waste Management: 1-2 points Recycled or Salvaged Points 50% 1 75% 2 Aluminum and bronze used in Balco, Inc. Stair Nosings are 100% recyclable. Any trimmed material and drop can be recycled. MR Credit 3: Materials Reuse 1-2 points Use salvaged, refurbished or reused materials, the sum of which constitutes at least 5% or 10%, based on cost, of building (construction) materials, excluding furniture and furnishings The minimum percentage materials reused for each point threshold is as follows: Reused Materials Points 5% 1 10% 2 Balco, Inc. Stair Nosings (retrofit) may be salvaged and re-used. Products purchased for use in the project are not eligible for this credit at the time of purchase. This is a future consideration S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316)
13 MR Credit 4: Recycled Content 1-2 points Use materials, including furniture and furnishings, with recycled content such that the sum of post-consumer recycled content plus 1/2 of the pre-consumer content constitutes at least 10% or 20% based on cost of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows: Recycled Content Points 10% 1 20% 2 Balco, Inc. Aluminum Stair Nosings contain qualifying recycled content, both post-consumer and preconsumer. MR Credit 5: Regional Materials 1-2 points Use building materials or products that have been extracted, harvested or recovered, as well as manufactured, within a specified distance of the project site for a minimum of 10% or 20%, based on cost, of the total materials value. If only a fraction of a product or material is extracted, harvested, or recovered and manufactured locally, then only that percentage (by weight) must contribute to the regional value. The minimum percentage regional materials for each point threshold is as follows: Regional Materials Points 10% 1 20% 2 OPTION 1 All building materials or products have been extracted, harvested or recovered, as well as manufactured within a 500 mile (800 kilometer) radius of the project site. OR OPTION 2 Building materials or products shipped by rail or water have been extracted, harvested or recovered, as well as manufactured within a 500 mile (800 kilometer) total travel distance of the project site using a weighted average determined through the following formula: (Distance by rail/3) + (Distance by inland waterway/2) + (Distance by sea/15) + (Distance by all other means) <500 miles [800 kilometers]. While materials used in the manufacture of Balco, Inc. Stair Nosing may be processed and manufactured within the 500 mile radius, raw materials may have been extracted at a variety of sites globally, It may not be possible to determine extraction sites with any certainty. Therefore, Balco, Inc. cannot guarantee that the products will contribute to this credit. Innovation in Design: ID Credit 1: Innovation in Design 1-2 points Credit can be achieved through any combination of the Innovation in Design and Exemplary Performance paths asdescribed below: PATH 3. Pilot Credit (1 point) Attempt a pilot credit available in the Pilot Credit Library at Register as a pilot credit participant and complete the required documentation. Projects may pursue more than 1 pilot credit; however, a maximum of 1 point will be awarded. Pilot Credit 54: Avoidance of Chemicals of Concern Use a minimum of 20%, by cost, of at least 3 building product and material types meeting one of the options below. Chemical Avoidance Option 1: Avoidance Use third party certified building products and materials that do not contain intentionally added substances Page 2 of 3; SN-SCH
14 present in the end product over the reporting thresholds below. Calculate compliant building products and materials at cost. Substance Allowed Concentration Lead and lead compounds Mercury Cadmium Anitmony Hexavalent Chromium Perfluorinated Compounds (PFCs) Carcinogens listed in California s Proposition 65 For projects outside the U.S. additionally Under levels that would avoid carcinogens listed on the trigger notification Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) substances of very high concern (SVHC) Candidate List Balco, Inc. Photoluminescent Stair Nosings, aluminum extrusion and photoluminescent strip, contain none of the Chemicals listed in Option 1 of Pilot Credit 54. Stair Nosings with abrasive do not qualify for this credit. Contact Balco, Inc. to learn more about LEED and how Balco, Inc. products can contribute to your project goals: Balco, Inc S. Sheridan PO Box Wichita, Kansas phone: (316) toll free: (800) fax: (316) Page 3 of 3; SN-SCH
Balco, Inc. Aluminum Expansion Joint Covers
Balco, Inc. Aluminum Expansion Joint Covers Applicable Rating Systems: CI - Commercial Interiors RETAIL CI - Retail, Commercial Interiors Balco, Inc. Aluminum Joint Cover Systems Contributes to LEED Credits
More informationBalco, Inc. PC Series Partition Closure Systems
Balco, Inc. PC Series Partition Closure Systems Applicable Rating Systems: CI - Commercial Interiors RETAIL CI - Retail, Commercial Interiors Balco, Inc. PC Series Partition Closure Systems Contributes
More informationLEED 2009 for Commercial Interiors. Presented by: Colleen McCafferty LEED AP Roselia Harris LEED AP
LEED 2009 for Commercial Interiors Presented by: Colleen McCafferty LEED AP Roselia Harris LEED AP Homes Commercial Interiors Core & Shell New Construction Schools Healthcare Existing Building Operations
More informationLEED LEED. Leadership in Energy and Environmental Design. A voluntary, consensus-based. high-performance, sustainable buildings and neighborhoods
LEED An Introduction to LEED V3 2009 LEED Leadership in Energy and Environmental Design A voluntary, consensus-based national standard for developing high-performance, sustainable buildings and neighborhoods
More informationLEED Application Guide for Multiple Buildings and On Campus Building Projects
LEED Application Guide for Multiple Buildings and On Campus Building Projects For Use with 2009 LEED Rating Systems for Design and Construction and Operations and Maintenance Released October 31, 2011
More informationProdukt Declaration - LEED 2009 New Construction And Major Renovations NC & CS
OL REFLECT 2K- Product Rating The product fulfills the requirements for adhesives and sealants and contribute to achieve one LEED credit within IEQ Credit 4.1. The product fulfills the requirements for
More informationExemplary Performance
Option D. Heat Island Reduction: Non-Roof? Option E. Heat Island Reduction: Roof? 1 2 Option J. Water Use Reduction? Option K. Onsite Renewable Energy? 3 4 Option L. Other Quantifiable Environmental? WE
More informationCornell Rolling Counter Fire Doors Comprehensive Guide to Earning LEED v4 Credits
Cornell Rolling Counter Fire Doors Comprehensive Guide to Earning LEED v4 Credits 1 Cornell Rolling Counter Fire Doors Earning LEED v4 Credits Cornell Rolling Counter Fire Doors can provide a significant
More informationCAMP BLANDING JOINT TRAINING CENTER CONSTRUCTION AND FACILITY MANAGEMENT OFFICE ARCHITECT S PROJECT # CFMO PROJECT #
SECTION 018113.13 - PART 1 - GENERAL 1.1 SUMMARY A. Section includes general requirements and procedures for compliance with certain USGBC LEED prerequisites and credits needed for Project to obtain LEED
More informationLEED Analysis of the Knight Management Center. Energy & Atmosphere. Materials & Resources
LEED of the Knight Management Center Energy & Atmosphere Materials & Resources Energy & Atmosphere: 17 possible points LEED-NC Scorecard LEED for New Construction v2.2 Registered Project Checklist Project
More informationGenentech Building 20 Office LEED-CI Gold XL CONSTRUCTION
Genentech Building 20 Office LEED-CI Gold Above and Beyond A LEED Gold 50,00 s.f. tenant improvement, the space was originally designed with a goal to achieve LEED silver certification. Innovative approaches
More informationAlpen Windows - LEED Impact Analysis
ALPEN WINDOWS MATERIALS: Energy Efficient Windows Alpen Windows - LEED Impact Analysis SECTION I. PRODUCT IDENTIFICATION Product Name: Alpen Windows Manufacturer: Alpen High Performance Products 6268 Monarch
More information500 WEST PUTNAM AVENUE GREENWICH, CT
LEED-CI ANALYSIS June 2015 500 WEST PUTNAM AVENUE GREENWICH, CT To learn more please visit the sustainability section of our website: www.slgreen.com or contact Jay Black, SL Green s director of sustainability
More informationProdukt Declaration - LEED 2009 New Construction And Major Renovations NC & CS
Product Rating The timber product does not contain added urea-formaldehyde resins and contribute to achieve one LEED credit within IEQ Credit 4.4. The product contains 35% recycled materials and contribute
More informationPliteq Inc. - LEED Summary
Pliteq Inc. - LEED Summary At Pliteq, we re committed to serving the health and safety of both our environment and our community. Pliteq is an engineering company dedicated to providing creative solutions
More informationThermiser Insulated Rolling Doors Comprehensive Guide to Earning LEED v4 Credits
Thermiser Insulated Rolling Doors Comprehensive Guide to Earning LEED v4 Credits 1 Thermiser Insulated Rolling Doors Earning LEED v4 Credits Cookson s Thermiser Insulated Rolling Doors can provide a significant
More informationThink. Product Environmental Profile (PEP) Americas
Product Environmental Profile (PEP) Americas CALCULATIONS FROM 07/2015 Think Product Environment Profile is an environmental declaration according to the objectives of ISO 14021. Precise, accurate, verifiable
More informationLEED for Commercial Interiors
LEED-CI LEED for Commercial Interiors Kim Lam Renee Webley What is the LEED-CI Rating System? The benchmark for tenant improvements of new or existing office space. An integrated design tool that sets
More informationMarketing Your Green Building Products
Light House Services for Manufacturers: Marketing Your Green Building s IS YOUR PRODUCT GREEN? NO: You may think your product is not green but maybe it is! YES: Hooray! But is your product marketing clear?
More informationLEED-2009 Green Building Rating System. New Construction & Major Renovations
LEED-2009 Green Building Rating System New Construction & Major Renovations 1 The following pages are designed to assist Engineers acquire LEED Credits in the design of Green Sustainable building utilizing
More informationDecoustics and LEED Leadership in Energy and Environmental Design
Decoustics and LEED Leadership in Energy and Environmental Design Buildings fundamentally impact people s lives and the health of the planet. In the United States, buildings use one-third of the total
More informationLEED V4 FACT SHEET FOR STEEL PRODUCTS USED IN CONSTRUCTION APPLICATIONS
LEED V4 FACT SHEET FOR STEEL PRODUCTS USED IN CONSTRUCTION APPLICATIONS Designers and builders have long recognized steel for its strength, durability and functionality. An important aspect of steel s
More informationMax-Stacker III. Product Environmental Profile (PEP) Americas
Product Environmental Profile (PEP) Americas CALCULATIONS FROM 05/2017 Product pictured is not the exact style of the product studied in this document. Max-Stacker III Product Environmental Profile is
More informationDaubois Inc. BLOCMIX 20 MPa
CONTRIBUTION LEED FICHE TECHNICAL TECHNIQUE DATA LEED SHEET Daubois Inc. Daubois Inc. manufactures and distributes specialized mortars and pre-mixed concrete. The company s two business divisions are the
More informationGreen Friendly Paint Green Building Performance Assessment
Green Friendly Paint Green Building Performance Assessment Prepared For: Dolores Ursini DuROCK Alfacing International Ltd. 0-B Roytec Rd. Woodbridge, Ontario, L4L 8A9 Prepared By: Kyle Anders, MASc, LEED
More informationErrata Sheet. LEED for Schools Reference Guide First Edition for the document titled:
Errata Sheet for the document titled: LEED for Schools Reference Guide First Edition 2007 Notes: Updates to this document are posted on the LEED for Schools Rating System page and the Reference Guide electronic
More informationLEED GUIDE. March. How Centaur Flooring Can Contribute to Obtaining LEED v4 Credits. March
March 2016 March LEED GUIDE How Centaur Flooring Can Contribute to Obtaining LEED v4 Credits. Revised on 03/31/16 Supersedes all previous versions. Check 1 website for updates. 3 What is LEED? Table of
More informationMatuto. Global Entry Collection. Manufacturer Brand MasterFormat Number. Mohawk Group Hard Surface Resilient Tile Flooring PRODUCT ATTRIBUTES
Matuto Global Entry Collection Manufacturer Brand MasterFormat Number Mohawk Group Hard Surface 09 65 19 Resilient Tile Flooring PRODUCT ATTRIBUTES Preconsumer Recycled Content 0.0% Postconsumer Recycled
More informationWhat s New in LEED v4
July 2017 AIA Course Number: LEED17A What s New in LEED v4 A focus on Material & Resources (MR) and Indoor Environmental Quality (IEQ) AIA Registration 2 Armstrong World Industries is a registered provider
More informationBUILDING FOR OUR FUTURE
BUILDING FOR OUR FUTURE The John T. Chambers Technology Center is a LEED Certified Building The Leadership in Energy and Environmental Design (LEED) Green Building Rating System is a voluntary national
More informationLEED And Your Indoor Environment
LEED And Your Indoor Environment An overview of LEED v3 and Indoor Air Quality David McCauley, CIE Council Certified Indoor Environmentalist ACAC CIE #1008005 USGBC's Mission To transform the way buildings
More informationtoxicity/ieq: While many media can be very toxic during production, most are considered inert when cured/compete.
This is a guidance document with sample specification language intended to be inserted into project specifications on this subject as appropriate to the agency's environmental goals. Certain provisions,
More informationMax Frank GmbH & Co. KG PRODUCT CHARACTERISTICS. Product Rating. LEED Category LEED Credit max. influenced score Degree of fulfillment %
MANUFACTURER PRODUCT NAME PRODUCT CHARACTERISTICS Shear connetor for the transmission of shear forces in expansion joints. Mitterweg 1 94339 Leiblfing Deutschland Product Rating LEED Category LEED Credit
More informationLEED v4 Documentation (BD+C, ID+C, O+M, Homes) Polyguard TERM Barrier System
LEED v4 Documentation (BD+C, ID+C, O+M, Homes) Polyguard TERM Barrier System TERM Sealant Barrier TERM Underslab Barrier TERM Foundation Barrier TERM Flashing Barrier & TERM Seam and Window Barrier TERM
More informationTerrazzo. Terrazzo is an oldworld
Terrazzo Terrazzo is an oldworld application with new-world design capabilities. Any functional work of art can be created using this cement or resinous matrix mixed with marble, granite, onyx or glass
More informationRegupol Sonus & SonusWave Underlayment Contrubutions to LEED
NC, CS, Schools, Retail, and LEED for Canada: NC MR 4 Use materials with recycle content such that the sum of post-consumer content plus one-half of the pre-consumer content constitutes at least 10% or
More informationTHERMA-FUSER VARIABLE AIR VOLUME DIFFUSER SYSTEMS
SUSTAINABLE DESIGN FORM 010.901 REV 1211 THERMA-FUSER VARIABLE AIR VOLUME DIFFUSER SYSTEMS SUSTAINABLE DESIGN GUIDE StopWaste.Org LEED-NC Platinum Energy Foundation LEED-CI Platinum Adobe East Tower LEED-EB
More informationB-Free small cube. Product Environmental Profile (PEP) Europe, Middle East, Africa
Product Environmental Profile (PEP) Europe, Middle East, Africa CALCULATIONS FROM 06/2014 B-Free small cube Product Environmental Profile is an environmental declaration according to the objectives of
More informationSAS International GSAS / QSAS compliance
Environmental Commitment SAS International is committed to ensuring environmental best practice throughout the life of its products to ensuring minimum impact upon the global environment. As a business
More informationECOsurfaces. March. How ECOsurfaces Can Contribute to Obtaining LEED v4 Credits. March. March
March 2018 March ECOsurfaces March & How ECOsurfaces Can Contribute to Obtaining LEED v4 Credits. This guide includes LEED information for ECOsurfaces Classic, ECOrx, ECOfit, ECOmax, ECOsmash, and ECOcomfort.
More informationSECTION (SECTION 06160) SHEATHING SPECIFIER NOTE:
This is a guidance document with sample specification language intended to be inserted into project specifications on this subject as appropriate to the agency's environmental goals. Certain provisions,
More informationRichelieu introduces decorative hardware that contributes toward satisfying Credit 4.1 and 4.2 Recycled Content for LEED certification
Richelieu introduces decorative hardware that contributes toward satisfying Credit 4.1 and 4.2 Recycled Content for LEED certification Richelieu takes seriously its responsibilities to promote environmental
More informationHigh Panel - KC129. Karastan. MasterFormat Number: Sheet Carpeting
MANUFACTURING / EXTRACTION LOCATIONS Manufacturing Location: Landrum, SC, 29356 PRODUCT ATTRIBUTES Closed Loop / Take Back Program: ReCover Program Recyclable: 100% TVOC Range: 0.5 mg/m3 or less CERTIFICATIONS/LABELS/DECLARATIONS
More informationUSGBC & LEED. A Summary of the LEED Development as a primer for LEED ND
USGBC & LEED A Summary of the LEED Development as a primer for LEED ND US Green Building Council USGBC Basic USGBC information LEED (Leadership in Energy and Environmental Design GBCI (Green Building Certification
More informationClose Up - BC379. Bigelow. MasterFormat Number: Sheet Carpeting
MANUFACTURING / EXTRACTION LOCATIONS Manufacturing Location: Chatsworth, GA 30705 PRODUCT ATTRIBUTES Pre-Consumer Recycled Content: 28% Post-Consumer Recycled Content: 0% Closed Loop / Take Back Program:
More informationSynergies & Trade-offs: IP category
Synergies & Trade-offs: IP category Integrative Process (IP) Related Synergies and Trade-offs IPc Integrative Process LTc Access to Quality Transit LTc Reduced Parking Footprint SSc Heat Island Reduction
More informationLEED v4 Credit Guidance for Andersen Products LEED for Building Design and Construction: Homes and Multifamily Midrise
LEED v4 Credit Guidance for Andersen Products LEED for Building Design and Construction: Homes and Multifamily Midrise About LEED Certification The U.S. Green Building Council s LEED green building program
More informationCONTRIBUTION OF NORA PRODUCTS TO LEED v4
CONTRIBUTION OF NORA PRODUCTS TO LEED v4 3 Content Introduction.... 3 Materials & Resources.... 4 Environmental Product Declarations (EPD).... 5 Sourcing of Raw Materials.... 6 Material Ingredients....
More informationLEED Leadership in Energy and Environmental Design
LEED Leadership in Energy and Environmental Design United States Green Building Council (USGBC) Founded in 1993, the United States Green Building Council (USGBC) was the first Green Building Council formed
More informationLEED version 4 Leadership in Energy and Environmental Design
LEED version 4 Leadership in Energy and Environmental Design United States Green Building Council Founded in 1993, the United States Green Building Council (USGBC) was the first Green Building Council
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 01 8113.53 - SUSTAINABLE DESIGN REQUIREMENTS - GREEN GLOBES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationCase Study: Element PROJECT DESCRIPTION
Case Study: Element PROJECT DESCRIPTION Project type: Project gross SF: Number of keys: Location: Hotel (Hospitality), extended-stay prototype Varies, prototypical SF: 79,035 SF gross Varies, prototypical:
More informationULMA S COMPROMISE & CONTRIBUTION TO LEED CERTIFICATION
ULMA S COMPROMISE & CONTRIBUTION TO LEED CERTIFICATION UNDERSTANDING LEED Leadership in Energy and Environmental Design- LEED is an internationally recognized green building certification system, providing
More informationA. The project is intended to achieve LEED Certification at the Silver Level per the U.S. Green Building Council LEED for Schools 2007 rating system.
SECTION 23 01 01 HVAC LEED REQUIREMENTS PART 1 -GENERAL 1.1 WORK INCLUDES A. Compliance with LEED project requirements. B. Coordination of LEED construction phase activities. C. Data gathering of construction
More information37% 100% 100% PROJECT HIGHLIGHTS LEED Facts. Wiener Auditorium
Taubman Building, 15 Eliot St., Cambridge, MA, 02138 LEED CI V2009 GOLD The is a 2,943 square foot space located in the Taubman Building of the Harvard Kennedy School of Government. The project scope includes
More informationSECTION RESILIENT STAIR TREADS CSI 3-PART SHORT-FORM GUIDE SPECIFICATION USE FOR OUTLINE OR DD SPECIFICATION ISSUES. EDIT TO SUIT PROJECT
SECTION 09 6 13 RESILIENT STAIR TREADS CSI 3-PART SHORT-FORM GUIDE SPECIFICATION USE FOR OUTLINE OR DD SPECIFICATION ISSUES. PART 1 - GENERAL 1.1 SUMMARY EDIT TO SUIT PROJECT A. Work of this Section consists
More informationSECTION ALUMINUM WINDOWS
SECTION 08520 ALUMINUM WINDOWS PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Storefront systems and aluminum framed glass doors. 2. Hardware, fasteners, accessories, filler pieces, etc., required
More informationThe Use of Green Building Materials in Construction and their Impact on Rating Systems
The Use of Green Building Materials in Construction and their Impact on Rating Systems Natural Habitat Mario Seneviratne FIMechE., PEng., LEED AP (BD+C), LEED Faculty Member, LEED Mentor. Managing Director
More informationKnoll and Sustainable Design. Life Chair LEED Credits
Life Chair Overview Life is a light, flexible ergonomic chair designed by Formway Design for Knoll that includes among its multiple awards a Best of NeoCon Gold for Office Seating. Environmental characteristics
More informationMR Credits 2.1 and 2.2 for both NC and CI: (Construction Waste Management)
Siena for LEED CI and NC Materials & Resources (MR): MR Credits 2.1 and 2.2 for both NC and CI: (Construction Waste Management) In this credit, you have to remove construction or demolition debris and
More informationGreen Remodeling Illustrations GREEN REMODELING ILLUSTRATIONS GREEN BUILDING GUIDELINES FOR HOME REMODELING
Green Remodeling Illustrations GREEN REMODELING ILLUSTRATIONS GREEN BUILDING GUIDELINES FOR HOME REMODELING WWW.STOPWASTE.ORG New Addition Consider the following green remodeling options in a new addition.
More informationREQUIREMENTS FOR SUBSTANTIALLY DAMAGED AND SUBSTANTIALLY IMPROVED STRUCTURES
REQUIREMENTS FOR SUBSTANTIALLY DAMAGED AND SUBSTANTIALLY IMPROVED STRUCTURES If your home or business incurred damage, the engineering department, in conjunction with the Flood Mitigation Officer, will
More information2012 Green Homes Tour
Sunday, November 4 th 11AM-4PM Tour innovative sustainablydesigned homes throughout San Diego County. All homes feature high performance green design and construction features. Tour includes sustainably
More informationResearch Analysis: Building Envelope and LEED Credits Introduction
: Building Envelope and LEED Credits Introduction Green buildings are no longer a new idea and are quickly becoming the trend in the slowly changing industry of building construction. Even though the essence
More informationSECTION SUSTAINABLILITY CERTIFICATION REQUIREMENTS - GREEN GLOBES
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 01 81 13.21 SUSTAINABLILITY CERTIFICATION REQUIREMENTS - GREEN GLOBES A. This section describes general requirements and procedures to comply with the Green Building
More informationPROPOSED SAN FRANCISCO GREEN BUILDING CODE AMENDMENTS 2016 Edition
PROPOSED SAN FRANCISCO GREEN BUILDING CODE AMENDMENTS 2016 Edition Chapter 1 GENERAL SECTION 101 GENERAL 101.1 Title. These regulations shall be known as the California San Francisco Green Building Standards
More information2016 CALGREEN RESIDENTIAL CHECKLIST MANDATORY ITEMS City of San Carlos - Building Division 600 Elm Street, San Carlos, CA Phone:
2016 CALGREEN RESIDENTIAL CHECKLIST MANDATORY ITEMS City of San Carlos - Building Division 600 Elm Street, San Carlos, CA 94070 Phone: 650-802-4261 PURPOSE: The residential provisions of the 2016 CalGreen
More informationUsing Concrete to LEED POINT SYSTEM BY MARTHA G. VANGEEM AND MEDGAR L. MARCEAU. Sustainable sites
Using Concrete to Maximize LEED Points BY MARTHA G. VANGEEM AND MEDGAR L. MARCEAU T he Leadership in Energy and Environmental Design (LEED) green building rating system recognizes buildings with lessened
More informationAnalysis 1. LEED Analysis of Laboratory Buildings. Penn State School of Forest Resources University Park, PA
Analysis 1 LEED Analysis of Laboratory Buildings Background The LEED program (Leadership in Energy and Environmental Design) established by the U.S. Green Building Council is becoming the standard by which
More informationResearch Topic LEED Guide for Trade Contractors
Research Topic LEED Guide for Trade Contractors Introduction Problem/Opportunity Statement Green Building is a hot topic in today s industry. However, the client of Milestone Building #4 had to take away
More informationLEED Application Guide for Multiple Buildings and On-Campus Building Projects
LEED Application Guide for Multiple Buildings and On-Campus Building Projects For Use with 2009 LEED Rating Systems for Design and Construction and Operations and Maintenance Released October 31, 2011
More information35% reduction in water use below code maximum 83% 88% 49% reduction in lighting power density 12%
Science Center Cabot Library Project LEED CI v4.0 1 Oxford Street, Cambridge, ma LEED Certified Project Profile December 2017 The Science Center Cabot Library project was comprised of renovating the entry,
More informationJMU Capital Projects SWaM Outreach Event Presentations
JMU Capital Projects SWaM Outreach Event Presentations Kjellstrom + Lee Contact: Jessica Marcus jmarcus@kjellstromandlee.com Project: College of Business Renovation/Expansion Please contact Kjellstrom
More informationSHAFTWALL C-H STUD FIRE RATING ENGINEERING CATALOG
SHAFTWALL C-H STUD FIRE RATING ENGINEERING CATALOG 1-800-275-2279 STEELER INC. Shaft Walls C-H Studs & J-Track for Shaft Wall Construction 1-800-275-2279 STEELER C-H Studs can be used in the Shaft Wall
More informationRespons Seating. Table Of Contents. Product Environmental Criteria
Respons Seating Product Environmental Criteria Table Of Contents Planet Keilhauer Overview... 2 Respons Seating Life Cycle... 3 Environmental Standards & Credit Applicability... 5 Materials & Recycled
More informationCONSTRUCTION WASTE MANAGEMENT PLAN
CONSTRUCTION WASTE MANAGEMENT PLAN Project: Construction Manager: Location: Prepared by: PREMIER FACILITY MANAGEMENT (PFM) Date: I. OBJECTIVES The objectives of this plan are to: 1. Recycle, reuse or salvage
More informationLEED -Existing Buildings. Crescent Ridge Corporate Center I
LEED -Existing Buildings Crescent Ridge Corporate Center I LEED Leadership in Energy and Environmental Design The U.S. Green Building Council is a coalition of leaders in the building industry promoting
More informationLEED 2009 for New Construction and Major Renovations
LEED 2009 for New Construction and Major Renovations Bayshore District Operations Building Project Checklist 4.28.6 20 4 0 Sustainable Sites Possible Points: 26 Y? N d/c Notes: Y C Prereq Construction
More informationColumbia Skylights may qualify your project for LEED points in the following categories: Columbia Skylights - Potential Contribution to LEED projects
3.0 Statement Columbia Skylights Statement for New Construction (NC) Version 3.0 Credit Documentation The Leadership in Energy and Environmental Design () Green Building Rating System promotes the adoption
More informationA. Product data. Unless otherwise indicated, submit the following for each type of product provided under work of this Section:
This is a guidance document with sample specification language intended to be inserted into project specifications on this subject as appropriate to the agency's environmental goals. Certain provisions,
More information75% 40% reduction in water consumption. 43% 68% 90%
HOLOKE EIGHTH FLOOR CAMPUS SERVICE CENTER 75 Mount Auburn Street, Cambridge, MA 02138 LEED-CI V3 GOLD The Harvard Campus Service Center LEED CI project is an interior renovation of existing office space
More informationSustainability Our journey to provide sustainable furniture solutions
Sustainability Our journey to provide sustainable furniture solutions Grand Rapids MI: 877.613.2012 Lacey WA: 888.315.1579 rtlondon.com RT London + Sustainability What we are doing to improve our Sustainability
More informationProduct Guide Specification
Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationLUX Specifications. Section S - Preformed Steel Siding
Part 1 General.1 System-1: Installation over building paper or air barrier membrane, on exterior grade gypsum board or exterior grade wood sheathing. 1.2 RELATED SECTIONS.1 Section 01 11 00 Summary of
More informationLEED Project Delivery Process Manual Appendices
LEED Project Delivery Process Manual Appendices November 2016 Second Edition Appendices Page Appendix 1: Other Alberta Requirements and Green Building Standards 3 Appendix 2: Integrated Design Process
More informationLEED for Existing Buildings:
LEED for Existing Buildings: Operations and Maintenance 101 0 Agenda 1. Overview of changes to LEED-EBOM 2009 3. Assessing Building Opportunities Building Exterior and Site Water Efficiency Energy & Atmosphere
More informationHOLDER CONSTRUCTION COMPANY Superintendent s Weekly Activity Report #154 Douthit Hills Student Community, Clemson University Project Tony Greene
January 19, 2018 Page 1 CURRENT CONSTRUCTION ACTIVITIES WEST ZONE Completed Carpet & Base in B6 Corridor. Completed 1 ST Coat of Paint in B4 Corridor. Completed 2 ND Coat of Paint in C3 Units Completed
More informationSUSTAINABLE OFFICE DESIGN CHECKLIST YOUR STEP-BY-STEP GUIDE TO A GREEN OFFICE INTERIOR
1 SUSTAINABLE OFFICE DESIGN CHECKLIST YOUR STEP-BY-STEP GUIDE TO A GREEN OFFICE INTERIOR 1 SUSTAINABLE OFFICE DESIGN CHECKLIST YOUR STEP-BY-STEP GUIDE TO A GREEN OFFICE INTERIOR There are many reasons
More informationEA PREREQUISITE 2: MINIMUM ENERGY PERFORMANCE
THRESHOLD ATTEMPTED LEED 29 for New Construction and Major Renovations EA PREREQUISITE 2: MINIMUM ENERGY PERFORMANCE Project # 138123 Jacobs Hall All fields and uploads are required unless otherwise noted.
More informationby Rollfab Metal Products
by Rollfab Metal Products SECTION 07460 ALUMINUM SIDING AND SOFFITS PART 1 GENERAL 1.2 RELATED SECTIONS 1.3 REFERENCES A. SECTION INCLUDES B. Aluminum Siding. C. Aluminum Soffits. D. Aluminum trim and
More informationImplementing LEED for Homes On Your Project Pt 1
Instructors: Jason LaFleur jlafleur@alliancees.org Brett Little brett.little@alliancees.org Implementing LEED for Homes On Your Project Pt 1 Tepeyac Photographer: Zeck Butler Architects Founded 2000 Midwest
More information1.1 SECTION INCLUDES A. Insulated Metal and FRP Wall and Ceiling Panels and Related Accessories.
Permatherm Specification SECTION 07435 (CSI MasterFormat 1995) SECTION 07 42 43 (CSI MasterFormat 2004) SECTION 07 42 13.19 (CSI MasterFormat 2012) INSULATED METAL and FRP WALL PANELS Part 1: General General:
More informationINFORMATION BULLETIN. Green Star NZ Office, Education and Industrial Tools. NZ Green Building Council. Who are the NZ Green Building Council (NZGBC)?
The NZ Green Building Council, Green Star NZ Tools, FSC TM Certified Timber and Formaldehyde Emissions from Composite Timber Products Supplied by CHH Woodproducts NZ December 2012 This document contains
More informationWMU Facility Life Cycle Design Guidelines Update (Approved by VP Van Der Kley & Facilities Management on 4/28/16)
Update (Approved by VP Van Der Kley & Facilities Management on 4/28/16) Developed by Sustainable Design Committee: Christopher Caprara, Devon Miller, Carolyn Noack, Eleonora Philopoulos, Kelsey Pitschel,
More informationLEED for Homes Project Checklist
LEED for Homes Project Checklist Builder Name: Project Team Leader: Home Address (Street/City/State): Project Description Adjusted Certification Thresholds Building Type: Project type: Certified: 45.0
More informationAppendix A WORK PROCESS SCHEDULE AND RELATED INSTRUCTION OUTLINE
Appendix A WORK PROCESS SCHEDULE AND RELATED INSTRUCTION OUTLINE Appendix A WORK PROCESS SCHEDULE OCCUPATION TITLE: CARPENTER O*NET-SOC CODE: 47-2031.00 RAPIDS CODE: 0067 This schedule is attached to and
More informationToyota Logistics Service. Portland Vehicle Distribution Center Redevelopment
Toyota Logistics Service Portland Vehicle Distribution Center Redevelopment Background Toyota operating in the Port of Portland since 1976. Import only based business model for Toyota when developed. 1990
More informationGreen Building Rating System For Commercial Interiors. Version 2
Green Building Rating System For Commercial Interiors Version 2 November 2004 Leadership in Energy and Environmental Design (LEED ) Buildings fundamentally impact people s lives and the health of the planet.
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-01 74 19 (January 2007) Change 2-05/15 ---------------------------- Preparing Activity: USACE Superseding UFGS-01 74 19 (October 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More information88.2% 32% 23% WEITZ LABORATORY GOLD. PROJECT HIGHLIGHTS LEED Facts. of on-site generated construction waste was diverted from landfills.
WEITZ LABORATORY GORDON MCKAY LABS BUILDING, 9 OXFORD STREET, CAMBRIDGE, MA 02138 LEED-CIV3.0 GOLD The Gordon McKay Laboratory of Applied Science (McKay) building, occupied and operated by the School of
More information