Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
|
|
|
- Gyles Jennings
- 6 years ago
- Views:
Transcription
1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (Environmental & Electrical Product Test Laboratory) 15 Enterprise Way Aviation Park West Bournemouth Airport Christchurch Dorset BH23 6HH Contact: Mr N J Lodge Tel: +44 (0) Lodgn@curtisswright.com Website: Testing performed at the above address only DETAIL OF ACCREDITATION AEROSPACE EQUIPMENT AND MATERIALS ELECTRICAL/ELECTRONIC PRODUCTS ELECTROMECHANICAL DEVICES INSTRUMENTS INDICATION/RECORDING MARINE EQUIPMENT MECHANICAL PRODUCTS MOTOR VEHICLE ACCESSSORIES AND COMPONENTS (Non-explosive items) Single Parameters HIGH TEMPERATURE Max Temp: +180 C 0.6 m x 0.6 m x 0.7 m BS EN :2005 BS EN : 2007 BS EN :1993 RTCA DO-160E:2004 RTCA DO-160D:4:97 RTCA DO-160C:1989 BS 2011:B:1977(1980) Tests Ba, Bb IEC :1974(1976) Subsection 3.2:1970(1983) Test B1 Method 108A Lloyds No 1: Section 17:1990 MIL-STD 810G 2008 Method Assessment Manager: CA2 Page 1 of 8
2 (Non-explosive items) (cont d) LOW TEMPERATURE MIN TEMP: -70 C TEMPERATURE CHANGE (Thermal Shock) Max temp: +175 C Min temp: -65 C 0.6 m x 0.6 m x 0.7 m MIL-STD 810G 2008 Method BS EN :2007 BS EN :1994 BS 2011:A:1990 Tests Aa, Ab IEC :1990 Subsection 3.2:1970(1983) Test B4 Method RTCA DO-160C:4:1989 Lloyds No 1: Section 18:1990 RTCA DO-160 D:4:1997 RTCA DO-160E:4:2004 BS 2011:N:1985(1987) Tests Na, Nb IEC :1984 Subsection 3.15:1978(1983) Test B14 Methods 107F and 107G MIL STD 810F:2000 Method RTCA DO-160C:5:Cat C:1989 RTCA DO-160D:5:Cat C:1997 RTCA DO-160E:5:2004 RTCA DO-160E:10 Cat Y:2004 MIL-STD 810G 2008 Method IEC :2009 Assessment Manager: CA2 Page 2 of 8
3 (Non-explosive items) (cont d) HIGH HUMIDITY - steady state Temp range: +20 C to +85 C Humidity range: 10% rh to 98% rh Max Chamber size: HIGH HUMIDITY - cyclic Temp range: +20 C to +85 C Humidity range: 10% rh to 98% rh BS EN Test Cab BS EN Test Ca RTCA DO-160D:6:1997 BS 2011:Ca:1977(1987) BS 2011:Cb:1990 IEC :1969 IEC :1988 Subsection 3.15:1970(1983) Test B7 Method 103 B RTCA DO-160C:6.0:1989 Lloyds No 1:Section 14:1990 RTCA DO-160E:6:2004 BS 2011:Db:1981(1987) IEC :1980 BS 2011:Z/AD:1977 IEC :1974 Subsection 3.15:1970(1983) Test B6, B8 Method RTCA DO-160C:6.0:1989 Lloyds No 1:Section 15:1990 RTCA DO-160D:6:1997 MIL-STD 810G 2008 Method BS EN :2005 Test Db BS EN :1999 Test Z/AD BS EN :2009 Test Z/AD Assessment Manager: CA2 Page 3 of 8
4 (Non-explosive items) (cont d) LOW PRESSURE Min pressure: 2.7 kpa (Max equiv altitude: 19,812 m, 65,000 ft) SALT, MIST/CORROSION/FOG (spraying) 0.9 m x 0.5 m x 0.5 m (storage) BS EN :1999 MIL-STD 810G 2008, Method BS 2011:M:1984 IEC :1983 Subsection 3.2:1970 Test B21 Method 105C Method RTCA DO-160D:4.6.1 Cats A, B, C, D, E, F:1997 RTCA DO-160C:4.6.1 Cats A, B, C, D, E, F:1989 RTCA DO-E:4.6.1:2004 RTCA DO-160F:4.6.1:2007 BS 2011:Ka:1982 IEC :1981 BS 2011:Kb:1987 IEC :1984 Subsection 3.8:1972(1983) Test C2 Method 101D Method RTCA DO-160C:14.0 Cat S:1989 Lloyds No 1:Section 16:1990 RTCA DO-160D:14.0:1997 RTCA DO-160E:14.0:2004, Category S and T MIL-STD 810G 2008, Method BS EN :1999 Ka BS EN :1996 Kb BS EN ISO 9227:2012 Assessment Manager: CA2 Page 4 of 8
5 (Non-explosive items) (cont d) Combined Parameters HIGH TEMP/LOW PRESSURE Min pressure: 5.6 kpa (Max equiv altitude: 19,812 m, 65,000 ft) Max temp: +50 C LOW TEMP/LOW PRESSURE Min pressure: 5.6 kpa (Max equiv altitude: 19,812 m, 65,000 ft) Min temp: -55 C DYNAMIC Single Parameters VIBRATION - sinusoidal Freq range: 3 to 3000 Hz Peak thrust: 35.6 kn Max pk/pk displacement: 25 mm BS 2011:Z/BM:1977(1986) IEC :1976 Test B11 BS EN :2000 BS 2011:Z/BM:1977(1986) IEC :1976 (1978) Test B12 BS EN :2000 Test Z/AM BS EN :2008 BS EN :1996 BS 2011:Fc:1983 IEC :1982 Subsection 3.1:1969(1983) Test A1 Methods 201A, 204D Method RTCA DO-160C:8.0:1990 RTCA DO-160D:8.0:1997, change Note 1 RTCA DO-160E:8:2004 MIL-STD 810G 2008 Method Assessment Manager: CA2 Page 5 of 8
6 DYNAMIC VIBRATION - random Freq range: 3 to 3000 Hz Max RMS: 35.6 kn Max pk/pk displacement: 25 mm VIBRATION - sine on random Freq range: 3 to 3000 Hz Max pk/pk displacement: 25 mm VIBRATION - Gunfire Freq range: 3 to 3000 Hz Max pk/pk displacement: 25 mm BS 2011:F:1973(1984) Tests Fd, Fda, Fdb, Fdc IEC to IEC inc:1973 BS EN :2008 BS EN :1995 Subsection 3.1:1969(1983) Test A2 Method 214A Method RTCA DO-160C:8.0:1990 RTCA DO-160D:8.0:1997 RTCA DO-160E:8.0:2004 MIL-STD 810G 2008, Method RTCA DO-160D:8.0:1997, Method RTCA DO-160E:8:2004 MIL-STD 810G:2008, Method MIL-STD 810F, Method MIL-STD 810F, Method 519.5, (cl d) MIL-STD 810G:2008, Method MIL-STD 810G:2008, Method (cl d) Assessment Manager: CA2 Page 6 of 8
7 DYNAMIC SHOCK (half sine, sustained, terminal peak sawtooth) Max severity: 50 g Pulse width: 6 ms to 20 ms (g dependent) Max item mass: 60 kg Max item size: 0.5 m x 0.5 m x 0.5 m BUMP Max item mass: 60 kg Max item size: 0.5 m x 0.5 m x 0.5 m Max severity: 40 g ACCELERATION - steady state Max accel: 25 g Max item mass: 15 kg Max item size: 0.2 m x 0.2 m x 0.2 m BS EN :1993 BS 2011:Ea:1988 IEC :1987 Test A3 MIL-STD 810F Method 213B RTCA DO-160C:7.0:1989 RTCA DO-160D:7.0:1997 RTCA DO-160E:7.0:2004 MIL-STD 810G:2008, Method BS EN :1993 BS 2011:Eb:1987 IEC :1987 Test A5 DEF 133:Part 3 Subsection 7.0:1963 RTCA DO-160D:1997 MIL-STD 810F, Notice 2 RTCA DO-160E:2004 BS EN :1993 BS 2011:Ga:1984 IEC :1983 Subsection 3.6:1972(1983) Test A6 Method 212A MIL STD 810F:2000 Method RTCA DO-160D:7.3.2:1997 RTCA DO-160C:1990 RTCA DO-160E:2004 MIL-STD 810G:2008, Method Assessment Manager: CA2 Page 7 of 8
8 ELECTRICAL/ELECTRONIC COMPONENTS and PRODUCTS ELECTRICAL TESTS Voltage: 0.1 V to 100 V dc 1 V to 260 V ac (50 Hz to 20 khz) Current: 15 ma to 2 A dc 0.5 A to 2 A ac (50 Hz to 400 khz) Documented In-House Methods (As agreed with client) TP22:Issue 11: 19/11/2014 TP23:Issue 7: 20/11/2014 Resistance: 20 to 20 M dc TP24:Issue 11: 24/02/2016 MIL-STD 202F Methods 302, 303 Insulation resistance TP25:Issue 6: 24/02/2016 Frequency: 10 Hz to 5 khz Period: 0.1 s to 10 s TP26:Issue 7: 23/02/2016 END Assessment Manager: CA2 Page 8 of 8
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 38 Contact: Mr Steve Abraham Suttons Business Park Tel: +44 (0)118 9662724 Suttons Park Avenue Fax: +44 (0)118 9669023 Reading E-Mail:
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 30 Issue date: 09 February 2018 Tregwilym Industrial Estate Contact: Clive Warren Rogerstone Tel: +44 (0)1443 290022 Newport Fax:
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Product Assessment & Reliability Centre Ltd Unit 4 Alverdiscott Industrial Estate Bideford Devon EX39 4LQ Contact: Mr Richard Tabor Tel: +44 (0)1237 421255 E-Mail: info@parctest.co.uk Website: www.parctest.co.uk
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Stratford Road Solihull West Midlands B90 4GW Contact: Mr C Gregory Tel: +44 (0)121 627 3225 Fax: +44 (0)121 627 4353 E-Mail: colin.gregory@trw.com Website: www.conekt.co.uk Testing performed at the above
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QUALITECH 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Teodor Weisz Phone: 972 3 926 6218 Email: Tedy.Weisz@ecitele.com Eli Avital Phone: 972 3 926 6170 MECHANICAL
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Product Development and Qualification Airport Works Rochester Kent ME1 2XX Contact: Mr P J Davison Tel: +44 (0)1634 204457 Fax: +44 (0)1634 203647 E-Mail: paul.j.davison@baesystems.com Website: www.baesystems.com/faradaytestcentre
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Manor Royal Crawley West Sussex RH10 9H Contact: Laura McLoughlin Tel: +44 (0) 1293 581824 E-Mail: laura.mcloughlin@uk.thalesgroup.com Testing
List of Environmental Test related MIL-STD-810 etc.
미국방규격및관련환경시험항목입니다. TEST Altitude Temperature/ Altitude Method applied ASTM D4169 14; DEF STAN 00 35, Part 3, Issue 4:2006: Chapter 3 09 Test CL9 Rapid and Explosive Decompression; GR 63 CORE, Issue 1 Paragraph
Scope of Accreditation For Retlif Testing Laboratories
Scope of Accreditation For Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma NY 11779 Robert Lenker 215-256-4133 x360 In recognition of a successful assessment to ISO/IEC 17025:2005 and the requirements
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY DENVER 1530 Vista View Drive Longmont, CO 80504 Sandra Frank Phone 561 529 1488 MECHANICAL Valid To: July 31, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY PORTLAND 1 5245-A NE Elam Young Pkwy Hillsboro, OR 97124 Sandra Frank Phone: 561-529-1488 Email: sandra.frank@element.com MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HERMON LABORATORIES 66 Hatachana Street (Postal Mail to P.O. Box 23) Binyamina, 3055001, ISRAEL Mr. George Shleimovich Phone: 972 4 6288 001 Email: mail@hermonlabs.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARMEL-ENVIRONMENTAL TESTS LTD. 33 Alexander Yanai Street Petach Tikva, Israel 49277 Avi Saban Phone: 972-549932413 MECHANICAL Valid To: May 31, 2018 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS Massachusetts Division 1146 Massachusetts Avenue Boxborough, MA 01719 David Potpinka Phone: 732 936 0800 MECHANICAL Valid to: September
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 67 Mechanic Street Attleboro, MA Mark Gates MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 67 Mechanic Street Attleboro, MA 02703 Mark Gates 508 226 4800 MECHANICAL Valid to: February 29, 2016 Certificate Number: 1478.01 In recognition
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI Thomas Lamoureux
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI 02916-1035 Thomas Lamoureux 401-865-6440 MECHANICAL Valid to: February 28, 2018 Certificate Number:
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that B83 Testing & Engineering, Inc. 3040 West
High Current Thermal Fuse
High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 55 A Material categorization: For definitions of compliance please see www.vishay.com/doc?99912
Anecto Ltd. Ballybrit Business Park, Galway. Testing Laboratory Registration number: 175T
Anecto Ltd. Ballybrit Business Park, Galway Testing Laboratory Registration number: 175T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule bearing the Registration
HIGH VOLTAGE RESISTOR HVR
HIGH VOLTAGE RESISTOR FEATURES Metal film technology High pulse loading capability Small size Meeting safety requirements of: UL1676 (37 and 68, range 510 KΩ ~ 11 MΩ) - pending IEC 60065 EN 60065 VDE 0860
Transport of IGCT. The transportation of IGCT is classified according to IEC set IE22. Power and productivity for a better world
Application te 5SZK 9110-00 Transport of IGCT The transportation of IGCT is classified according to IEC 60721-3-2 set IE22. Time limitation for transportation For the transportation by lorries and trailers
EUROPEAN ETS TELECOMMUNICATION May 1994 STANDARD
EUROPEAN ETS 300 019-2-1 TELECOMMUNICATION May 1994 STANDARD Source: ETSI TC-EE Reference: DE/EE-1019-2-1 ICS: 33.080 Key words: Environment, equipment Equipment Engineering (EE); Environmental conditions
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PARAGON SYSTEMS 18 Basaltic Road Concord, Ontario, CANADA L4K 1G6 Tony Araujo Phone: 905 738 0447 x 237 tonya@paragonsystems.ca MECHANICAL Valid To: April 30,
Because People Rely on Your Products, Everyday, You can Rely on Us
Because People Rely on Your Products, Everyday, You can Rely on Us testing Services Environmental Testing Shock & Vibration Testing ACCREDITED 503.1 & 503.2 Ohio and Michigan Laboratories csz testing services
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Clark Dynamic Testing Laboratory, Inc. 1801
EUROPEAN ETS TELECOMMUNICATION May 1994 STANDARD
EUROPEAN ETS 300 019-2-4 TELECOMMUNICATION May 1994 STANDARD Source: ETSI TC-EE Reference: DE/EE-1019-2-4 ICS: 33.080 Key words: Environment, specification, equipment Equipment Engineering (EE); Environmental
EUROPEAN ETS TELECOMMUNICATION May 1994 STANDARD
EUROPEAN ETS 300 019-2-7 TELECOMMUNICATION May 1994 STANDARD Source: ETSI TC-EE Reference: DE/EE-1019-2-7 ICS: 33.080 Key words: Environment, specification, equipment Equipment Engineering (EE); Environmental
Draft EN V2.1.1 ( )
European Standard (Telecommunications series) Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-8: Specification of environmental tests;
AMOTECH SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S July 3, 2001 MULTILAYER CHIP VARISTOR SHEET 1/6 DESIGNED CHECKED APPROVED
SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S 02 050 July 3, 2001 CO., LTD. 17-2, JAMWON-DONG, SEOCHO-GU, SEOUL, KOREA TEL : 82-2-544-1351 FAX : 82-2-517-7183 DESIGNED CHECKED APPROVED MULTILAYER
L.L_.,.till' President and CEO For the Accreditation Council Certificate Number Valid to May 31,2020
Accredited Laboratory A2LA has accredited KEYSTONE COMPLIANCE New Castle, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized
ETSI EN V3.0.0 ( )
EN 300 019-2-5 V3.0.0 (2002-12) European Standard (Telecommunications series) Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-5:
Product Specification
Product Name : AEM Part Number : Customer : Customer Revision: 2 Date: 2011-09-08 AEM Components (Suzhou) Co., Ltd 458 Shenhu Road, Suzhou Industrial Park Jiangsu, P.R China, 215122 TEL: 86-512-6258-0028
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Retlif Testing Laboratories TESTING
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma, NY 11779 Robert Bernius rbernius@retlif.com TESTING Valid to: September 2, 2019 Certificate Number:
Military Attenuator Module
Military Attenuator Module Actual size: 2.28 x 2.4 x 0.5in 57,9 x 61,0 x 12,7mm MI-RAM Ripple Attenuator Module Features & Benefits Reduces output PARD to 10mVp-p Full attenuation up to 20A load No adjustments
Draft EN V2.1.1 ( )
European Standard (Telecommunications series) Equipment Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests;
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) 1 Plano Division 1701 E Plano Pkwy Suite 150 Plano, Texas 75074 Kimberly Zavala Phone: 972 509 2566 Kimberly.Zavala@ntscorp.com
Ceramic PTC Thermistor: PSB Series
Features. RoHS compliant 2. Voltage ratings: 40V ac to 560V ac 3. Resistance range:0~00ω 4. Stable over a long life 5. Operating temperature range: -0 ~ +85 C (V=Vmax) -25 ~ +25 C (V=0) 6. Agency recognition:
QA Test Report VITA-350. (Product Reliability Test) Charles Chang Manager of QA Department. Knight Hu Test Engineer. Jeff Yang Approval
ISO-9001 Certified ISO-14000 Certified ISO-17025 Certified ADVANTECH CO., LTD. QA Test Report VITA-350 (Product Reliability Test) Report No : 07S092A1 Report Date : January 10, 2008 Issue Stamp Charles
3-Position Cylinder Lock Operator Cat. No. 800T-J41A 800 T J41 KC1 A T-XAVs 1 on white
3-Position Selector Switch Devices, Non-Illuminated (Bul. 800T only) 3-Position Cylinder Lock Operator Cat. No. 800T-J41A 800 T J41 KC1 A a b c d e f a c (cont d) e (cont d) f (cont'd) Protection Rating
LABORATORY TEST REPORT
Report : 12144 BAE Systems (Operations) Limited The Faraday Test Centre Marconi Way Rochester Kent ME1 2XX Telephone: 01634 203541 Facsimile: 01634 203647 TOTAL NUMBER OF PAGES:- 6 LABORATORY TEST REPORT
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Suite 3.4 Oaktree House Oakwood Lane Leeds LS8 3LG Contact: Mr G M Charlesworth Tel: +44 (0)113 345 4242 Email: info@acertl.com Website: www.acertl.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Retlif Testing Laboratories TESTING
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Retlif Testing Laboratories 795 Marconi Avenue Ronkonkoma, NY 11779 Robert Bernius rbernius@retlif.com TESTING Valid to: September 2, 2019 Certificate Number:
Product Specification JUL 14 Rev. A1
Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents
Design Objective
Design Objective 108-115096 Low profile 5A battery connector 2015.03.03 REV:A 1.0 Scope: 1.1 Content: This specification covers the requirements for product performance, test methods and quality assurance
ETSI EN V2.2.1 ( )
EN 300 019-2-4 V2.2.1 (2003-03) European Standard (Telecommunications series) Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4:
Ceramic PTC Thermistor: PSB Series
Features. RoHS compliant 2. Voltage ratings: 40V ac to 560V ac 3. Resistance range:0~00ω 4. Stable over a long life 5. Operating temperature range: -0 ~ +85 C (V=Vmax) -25 ~ +25 C (V=0) 6. Agency recognition:
Operation of pressure contact IGCTs
Application note 5SZK 9107-00 Operation of pressure contact IGCTs The operation of the pressure contact IGCT is classified according to IEC 60721-3-3 (Edition 2.2) set IE33. Validity GCTs with F-, H-,
H3A metal IP65 Hood and Housing series
Table of contents Product Specification 108-137012 H3A metal IP65 Hood and Housing series 1. SCOPE... 2 1.1. Content... 2 1.2. Qualification... 2 2. APPLICABLE DOCUMENTS... 2 2.1. TE Connectivity Documents...
Vibration & Shock Test Report
Nebraska Center for Excellence in Electronics 4740 Discovery Drive Lincoln, NE 68521-5376 Phone: 402.472.5880 Fax: 402.472.5881 Vibration & Shock Test Report Company: Contact: Crystal Group 850 Kacena
JN FPC P CONNECTOR MANUFACTURER SIGNATURE
DOC. NO.: - ISSUE DATE: 20 / / CUSTOMER: PART NAME: PART NO.: FPC P CONNECTOR 1 APP. DATE: MANUFACTURER SIGNATURE P-TWO INDUSTRIES INC. NO. 9, SHIN HWA RD, KWEI SHAN IND. PARK TAOYUAN, 330 TAIWAN, R.O.C.
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
HOS LOW OHM POWER RESISTORS. SERIES Size As per AEC-Q Open frame strip type. 2W to 5W. R001 to R05.
SERIES Open frame strip type. 2W to 5W. R1 to R5. As per AEC-Q2 PHYSICAL CONFIGURATION L W H T D Recommended PCB layout for high precision applications : Kelvin (4 terminal pad design) is suggested as
Testing Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current Capability P
Application Notes Testing Procedures SMD Soldering Recommendations 57 Testing Procedures Testing Procedures Parameter Test Tested according to Condition to be satisfied after testing AC/DC Bias Pulse Current
DC-DC Converters MI-J00
DC-DC Converters MI-J00 10 to 50 Watts Features & Benefits Inputs: 28V DC per MIL-STD-704D/E/F 155V DC per MIL-STD-1399A 270V DC per MIL-STD-704D/E/F Single output: 2 48V DC Up to 23W/in 3 MIL-STD-810
Agilent 8490G Coaxial Attenuators
Agilent 849G Coaxial Attenuators Technical Overview Key specifications Maximize your operating frequency range for DC to 67 GHz application Minimize your measurement uncertainty with low SWR of 1.45 up
AUGUST 18, 2008 TEST REPORT #208315A QUALIFICAITON TESTING PART NUMBERS ERF S-D-RA ERM S-DV-L SAMTEC, INC.
AUGUST 18, 2008 TEST REPORT #208315A QUALIFICAITON TESTING PART NUMBERS ERF8-050-01-S-D-RA ERM8-050-05.0-S-DV-L SAMTEC, INC. APPROVED BY: DOMINIC ARPINO PROGRAM MANAGER CONTECH RESEARCH, INC. Contech Research
SPEAKER SC-COBRA
SPEAKER-1115-3.5-SC-COBRA The 11x15x3.5 mm rectangular COBRA speaker is a high end miniature speaker specifically designed for portable consumer devices, such as music phones, smartphones or tablet computers
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 51 The Freelands Main Road Kempsey Worcester WR5 3NB Contact: Mr W Lewis Tel: +44 (0)1905-821911 E-Mail: info@redstonecal.co.uk Website: www.redstonecalibration.co.uk
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY JUPITER 1 15814 Corporate Circle Jupiter, FL 33478 Sandra Frank Phone: 561 529 1488 sandra.frank@element.com MECHANICAL Valid To:
Ceramic PTC Thermistor: PPL Series
Features 1. RoHS compliant 2. Two resistance-matched s in a plastic housing 3. Wide resistance range in telecom area from 10 to 50Ω 4. Compliant with ITU-T standards 5. Operating temperature range: 0 ~
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-31031/41 10 March 2008 PERFORMANCE SPECIFICATION SHEET CONNECTOR, ELECTRICAL, RECEPTACLE, RADIO FREQUENCY, HIGH RELIABILITY, COAXIAL, SERIES BMZ, CONTACT, FOR FLEXIBLE CABLE This specification
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: USB3.1 Connector Product Specification GSB4X series A / B type, Receptacle, Thru hole, PCB mount Revisions Control Rev.
SWITCHES, THERMOSTATIC, BIMETALLIC, HERMETICALLY SEALED. ESCC Generic Specification No. 3702
Page 1 of 37 SWITCHES, THERMOSTATIC, BIMETALLIC, HERMETICALLY SEALED ESCC Generic Specification Issue 5 February 2018 Document Custodian: European Space Agency see https://escies.org PAGE 2 LEGAL DISCLAIMER
MAY-16 REV B2
Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 3933 U.S. Route 11 Cortland, NY 13045 Terence O Beirne Phone: 607 758 6316 www.intertek.com MECHANICAL Valid To: March 31,
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Interface NRM E-Innovation Centre University of Wolverhampton Telford TF2 9FT United Kingdom Contact: Mr Neal Batty Tel: +44 (0)1952 288325
General Purpose Chip Resistors MCMR Series
Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
PERFORMANCE SPECIFICATION SHEET
INCH-POUND PERFORMANCE SPECIFICATION SHEET MIL-PRF-28777F 23 June 2003 SUPERSEDING MIL-PRF-28777E 8 July 1996 RELAYS, HYBRID, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 1.0 AMPERE (SENSITIVE COIL OPERATE
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7
Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control
AUGUST 14, 2006 TEST REPORT # RANDOM VIBRATION TEST SERIES PROBE SERIES PROBE TEST SOCKET INTERCONNECT DEVICES, INC.
AUGUST 14, 2006 TEST REPORT #206271 RANDOM VIBRATION TEST 101377-000 SERIES PROBE 204130-036 SERIES PROBE TEST SOCKET INTERCONNECT DEVICES, INC. APPROVED BY: MAX PEEL SENIOR FELLOW CONTECH RESEARCH, INC.
Sales: Technical: Fax:
DATA SHEET Order code Manufacturer code Description 62-7265 n/a 1R 2W 1% METAL FILM RESISTOR RC 62-7266 n/a 2R2 2W 1% METAL FILM RESISTOR RC 62-7267 n/a 3R3 2W 1% METAL FILM RESISTOR RC 62-7268 n/a 4R7
Ruggedization of MXM Graphics Modules
Ruggedization of MXM Graphics Modules Author: Ivan Straznicky Curtiss-Wright Controls Defense Solutions 333 Palladium Dr., Ottawa, ON Canada K2V 1A6 1 Outline Introduction What is an MXM Graphics Module?
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Eden House Watling Street Industrial Estate Leadgate Consett County Durham DH8 6TA Contact: Mr R L Hannant Tel: +44 (0)1207 599260 Fax: +44
TECHNICAL SPECIFICATIONS FOR THE PURCHASE OF MEASURING EQUIPMENT
MARKET TRANSFORMATION PROGRAMME ON ENERGY EFFICIENCY IN GHG-INTENSIVE INDUSTRIES IN THE RUSSIAN FEDERATION SAP ID : 103056 Rfx 7000001768, 13 June 016 TECHNICAL SPECIFICATIONS FOR THE PURCHASE OF MEASURING
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
Mechanical Ratings. Description Plastic (800EP/ES) Metal (800EM/EB) 1/2 cycle sine wave for 11 ms and no damage at 100 G
Specifications ➊ Front of Panel (Operators) Mechanical Ratings Description Plastic (8EP/ES) Metal (8EM/EB) Vibration (assembled to panel) 1 2 Hz, 1.52 mm max./1 G max. Shock and no damage at 1 G Degree
15 15A 20 20A 30 30A 40 40A 60 60A VAC VAC VDC 24VAC VAC. 1 Single-phase. SRH VAC Zero cross turn-on
Features DIN rail mount or panel mount installation Dielectric strength: 4000 VAC High heat dissipation efficiency with ceramic PCB and integrated heatsink, random turn-on models available Input Indicator
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification One Cranmore Drive Shirley Solihull B90 4RZ United Kingdom Contact: Mr Jens Wolff Tel:
U7242A USB3.0 Test Fixture
U7242A USB3.0 Test Fixture User s Guide Agilent Technologies Notices Agilent Technologies, Inc. 2009 No part of this manual may be reproduced in any form or by any means (including electronic storage and
Mechanical Technology & Testing
The Power of Trust. The Future of Energy. MECHANICAL PERFORMANCE Tensile testing Environmental testing and failure analysis services 02 Powertech s clients have to ensure that new components and systems
Reference Only. Spec. No. JENF243H-0005H-01 P 1/ 7
Spec. No. JENF243H-0005H-01 P 1/ 7 1. Scope Block Type EMIFIL BNX003-01 Reference Specification This reference specification applies to Block Type EMIFIL. 2. Rating 2.1 Customer Part Number 2.2 Murata
Spec. No. JENF243H-0006H-01 P 1/ 7
Spec. No. JENF243H-0006H-01 P 1/ 7 1. Scope 2. Rating Block Type EMIFIL BNX005-01 Reference Specification This reference specification applies to Block Type EMIFIL. 2.1 Customer Part Number 2.2 Murata
TESTING / INSPECTION
Reliability & Communication Testing Instruments KING DESIGN INDUSTRIAL CO., LTD. VIBRATION TEST LABORATORY 4F,NO. 3, Lane 270, Pei Shen Road Sec. 3, http: //www.kdi.tw Shen Keng Dist., New Taipei City,
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39016/53C 27 April 2006 SUPERSEDING MIL-R-39016/53B 20 July 1988 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, HERMETICALLY SEALED, 4PDT, LOW LEVEL
Alternators single phase dedicated - 4 Pole LSA 43.2 / LSA 44.2
Alternators single phase dedicated - 4 Pole LSA 43.2 / LSA 44.2 5 to 135 kva Electrical and mechanical data 3542 en - 12.08 / f LSA 43.2 / 44.2-4 Pole SPECIALLY ADAPTED FOR SINGLE PHASE Dedicated single
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Gee House Holborn Hill Birmingham West Midlands B7 5PA United Kingdom Contact: Mr Chris
Reference Only. Spec. No. JENF243H-0003G-01 P 1/ 9
Spec. No. JENF243H-0003G-01 P 1/ 9 Block Type EMIFIL BNX01-01 Reference Specification 1. Scope 2. Rating This reference specification applies to Block Type EMIFIL. 2.1 Customer Part Number 2.2 Murata Part
IEECAS Power Semiconductor Testing Lab
IEECAS Power Semiconductor Testing Lab Tel: 010-82547081 ejzhang@mail.iee.ac.cn www.iee.cas.cn/qt/ieeps Introduction 2 About us Our testing center was founded in 2013, which is the first third-part integrated
Technical Data Sheet
Technical Data Sheet Product Name: PLCC 3528 RGB SMD TOP LED Part Number: HT67-2302SURUBGUBC(S) Customer: Customer PN: Version No.: A.3 Date: 2011.10.31 Customer Approval Instituted By: Checked By: Approved
Lighthouse LEDs. Technical Data Sheet. Customer Approval. Product Name High Bright Blue LED. Part Number. Customer. Customer PN. Version.
Technical Data Sheet Product Name 3528 High Bright Blue LED Part Number A-1210UBC Customer Customer PN Version Date Customer Approval Instituted By Checked By: Approved By 1. Features: Package ( L/W/H
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JSC RECEIVING INSPECTION AND TEST FACILITY Building 15, M/S NT315 Houston, TX 77058 Deborah Applegate Phone: 281 483 0288 ELECTRICAL Valid Until: December 31,
MMP - Metal Film MELF
Specifications Per IEC 60115-1, IEC 60115-2 EN140401-803 B L D Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high
Central Texas Electronics Association Electronics Design & Manufacturing Symposium February 22, 2011 IMPROVING SYSTEM RELIABILITY WITH SYNJET COOLING
Central Texas Electronics Association Electronics Design & Manufacturing Symposium February 22, 2011 IMPROVING SYSTEM RELIABILITY WITH SYNJET COOLING Markus Schwickert [1] SynJet (Synthetic Jet) Operating
OCT 16 Rev A
Product Specification 108-151041 10 OCT 16 Rev A Jiffy Splice System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Jiffy Splice
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Hareness Circle Industrial Estate Aberdeen Scotland AB12 3LY Contact: Mrs D McAdam Tel: +44 (0)1224-890020 Fax: +44 (0)1224-890220 E-Mail:
ISA-WELD // Precision resistors. BVS Size Features
BVS Size 3920 Features Power rating up to 2 W continuous current load up to 60 A (0.2 mohm) Heavy copper connectors Excellent long-term stability Max. solder temperature up to 350 C / 30 sec AEC-Q200 qualified
RA73 Series. Precision Thin Film Chip Resistors FEATURE PART NUMBERING SYSTEM DIMENSIONS AND LAND PATTERN RECOMMENDATION CONSTRUCTION
FEATURE Test Proven Immunity to Humidity, Mositure, and Sulfur Storage Temperature: 15~28 C; Humidity
SMPM Female Cabled Connectors
Product Specification 108-2326 28 APR 14 Rev B SMPM Female Cabled Connectors 1. SCOPE This specification covers performance, tests and quality requirements for the TE Connectivity (TE) Subminiature P Miniature