SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
|
|
- Emily Walker
- 6 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z KBRWYLE METROLOGY SERVICES N. 19th Ave Phoenix, AZ Blair Trett Phone: CALIBRATION Valid To: June 30, 2018 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory at the location listed above as well as the satellite laboratory location listed below 1 : I. Electrical DC/Low Frequency Parameter/Equipment Range CMC 2, 3, 4 ( ) Comments DC Voltage Generate (0 to 220) mv (0.22 to 2.2) V (2.2 to 11) V (11 to 22) V (22 to 220) V (220 to 300) V 2.6 µv 11 µv 0.12 mv 0.12 mv 1.2 mv 6.9 mv Fluke 5700A DC Voltage Measure Up to 100 mv (0.1 to 1) V (1 to 10) V (10 to 100) V 5.1 µv 14 µv 0.11 mv 58 mv HP 3458A, option II DC Current Generate (2.2 to 22) ma (22 to 220) ma 1.4 µa 11 µa Fluke 5700A DC Current Measure Up to 10 ma (10 to 100) ma 0.59 µa 0.99 µa HP 3458A, option II (A2LA Cert. No ) Revised 03/29/2018 Page 1 of 6
2 Parameter/Equipment Range CMC 2, 3 ( ) Comments Resistance Measure Up to 10 Ω (10 to 100) Ω (100 to 1000) Ω (1 to 12) kω 0.77 mω 7.4 mω 60 mω 0.71 mω HP 3458A, option II Resistance Generate (0 to 10) Ω (10 to 100) Ω (100 to 1000) Ω (1 to 10) kω Ω Ω 0.36 Ω 3.5 Ω Keysight 3458A with Decade box Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate (22 to 220) mv 40 Hz to 20 khz 0.15 mv Fluke 5700A (0.22 to 2.2) V (10 to 20) Hz (20 to 40) Hz (40 to 500) Hz 500 Hz to 1 khz (1 to 5) khz 0.24 mv 0.24 mv 0.21 mv 0.13 mv 0.19 mv (2.2 to 22) V 40 Hz to 1 khz 12 mv (22 to 220) V (20 to 100) Hz 100 Hz to 1 khz (1 to 5) khz 59 mv 18 mv 15 mv (220 to 300) V (40 Hz to 1 khz (1 to 5) khz 64 mv 63 mv (A2LA Cert. No ) Revised 03/29/2018 Page 2 of 6
3 Parameter/Equipment Range CMC 2 ( ) Comments Electrical Calibration of Thermocouple Indicators Generate Type B (600 to 800) C (800 to 1000) C (1000 to 1550) C (1550 to 1820) C 0.17 C 0.13 C 0.11 C C Fluke 5700 w/ TRP & ice bath Type C (0 to 1091) C (1091 to 2167) C (2167 to 2315) C 0.11 C 0.13 C 0.21 C Type E (-250 to -100) C (-100 to -25) C (-25 to 350) C (350 to 650) C (650 to 1000) C 0.11 C C C 0.02 C C Type J (-210 to - 30) C (-30 to 150) C (150 to 760) C (760 to 1200) C 0.16 C 0.12 C 0.14 C 0.13 C Type K (-200 to - 25) C (-25 to 120) C (120 to 1000) C (1000 to 1372) C 0.15 C 0.12 C C C Type N (-200 to -100) C (-100 to -25) C (-25 to 120) C (120 to 410) C (410 to 1300) C 0.19 C C C C C Type R (0 to 250) C (250 to 400) C (400 to 1000) C (1000 to 1767) C 0.17 C C C C Type S (0 to 250) C (250 to 1000) C (1000 to 1400) C (1400 to 1767) C 0.17 C 0.10 C C C Type T (-250 to -150) C (-150 to 0) C (0 to 120) C (120 to 400) C 0.29 C C C C (A2LA Cert. No ) Revised 03/29/2018 Page 3 of 6
4 Parameter/Equipment Range CMC 2 ( ) Comments Electrical Calibration of RTD Indicators Generate Pt 385, 100 Ω (-200 to 0) C (0 to 100) C (100 to 300) C (300 to 400) C (400 to 630) C (630 to 800) C 0.12 C C C 0.72 C C 0.15 C Keysight 3458A with Decade box II. Mechanical Tachometers Non Contact Up to 1000 RPM (1000 to ) RPM 0.40 RPM % RPM Fluke 5520A III. Thermodynamics Relative Humidity Measuring Equipment (10 to 90) % RH 0.57 % RH % RH/ % RH Thunder Scientific 2500 IV. Time & Frequency Frequency Measure 5 Hz to 50 khz % Hz 53132A counter Frequency Measuring Equipment 5 Hz to 50 khz % Hz 5700 calibrator w/ 53132A counter (A2LA Cert. No ) Revised 03/29/2018 Page 4 of 6
5 Parameter/Equipment Range CMC 2 ( ) Comments Stop Watches/ Timers Up to 3600 s 0.10 s Agilent 53132A w/ Fluke 5520A SATELLITE FACILITY KBRWYLE METROLOGY SERVICES 111 South 34 th Street Phoenix, AZ Blair Trett Phone: V. Mechanical Pressure Measuring Equipment Controllers/ Calibrators (0.05 to 28) psig (5 to 115) psig (100 to 1000) psig (500 to 3000) psig % % % % GE/Ruska 2465 (gage) GE/Ruska 2470 (0.05 to 28) psia (5 to 115) psia (100 to 1000) psia psia % psia % psia % GE/Ruska 2465 (absolute) Indicators & Gauges (0.05 to 24) in H 2 O in H 2 O % Dwyer 1425 hook gage (-14 to 0) psig (0 to 1.25) psig (1.25 to 2.5) psig (2.5 to 5) psig (5 to 10) psig (10 to 20) psig (20 to 40) psig (40 to 75) psig (75 to 150) psig (150 to 300) psig (300 to 600) psig (600 to 1250) psig (1250 to 2500) psig psig % psig % psig % psig % psig % psig % psig % psig % psig % psig % psig % psig % psig % Ruska 7250 Sys (gage) (A2LA Cert. No ) Revised 03/29/2018 Page 5 of 6
6 Pressure Measuring Equipment (cont) Indicators & Gauges (0.05 to 1.25) psia (1.25 to 2.5) psia (2.5 to 5) psia (5 to 10) psia (10 to 20) psia (20 to 40) psia (40 to 75) psia (75 to 150) psia (150 to 300) psia (300 to 600) psia (600 to 1250) psia (1250 to 2500) psia psia % psia % psia % psia % psia % psia % psia % psia % psia % psia % psia % psia % Ruska 7250 Sys (absolute) (0.05 to 500) psia psi % Ruska 7010 (absolute) (0.5 to 5000) psig (0.5 to ) psig psig % psig % DHI 5303 dead weight tester 1 This laboratory offers commercial calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards of nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the best uncertainty due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 The measurands stated are measured with the HP3458A. This capability is suitable for the calibration of the devices intended to measure the stated measurand in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a combination of the percent or portion of the reading plus a fixed floor specification. Uncertainties are determined with Manufacturer s one year specification based on PRESET, ACAL within 24 hours, and Tamb within 5 C of Tcal. 4 The measurands stated are generated with the Fluke 5720A, 5700A, 5520A, or 5500A. This capability is suitable for the calibration of the devices intended to measure the stated measurand in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as a combination of the percent or portion of the reading plus a fixed floor specification. Absolute CMC s are determined with manufacturer s one year specification based on Tamb within 5 C of Tcal. 5 In the statement of CMC, percentage refers to percent of reading, unless otherwise noted. (A2LA Cert. No ) Revised 03/29/2018 Page 6 of 6
7 Accredited Laboratory A2LA has accredited KBRWYLE METROLOGY SERVICES Phoenix, AZ for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the requirements of ANSI/NCSLI Z and R205 Specific Requirements: Calibration Laboratory Accreditation Program. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 28 th day of November President and CEO For the Accreditation Council Certificate Number Valid to June 30, 2018 Revised on March 29, 2018 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GREAT LAKES CALIBRATION, INC. 1795 W. Cortland Court Suite A Addison, IL 60101 Josh Hitchcock Phone: 630 613 9350 CALIBRATION Valid
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 NATIONAL INSTITUTE FOR AVIATION RESEARCH (NIAR) at WICHITA STATE UNIVERSITY National Institute for Aviation Research Building 1845 Fairmount
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 UNITED TESTING SYSTEMS, INC. 5171 Exchange Drive Flint, MI 48507 Kerry C. Shaffer Phone: 810 732 2800 CALIBRATION Valid until: December
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Instron Calibration Laboratory 825 University Avenue Norwood, MA 02062-2643 Mr. James O Donovan Phone: 781-575-5526 Fax: 781-575-5764 E-mail: james_odonovan@instron.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUEHLER, A DIVISION OF ILLINOIS TOOL WORKS, INC. 41 Waukegan Road Lake Bluff, IL 60044 Jace Carney Phone: 847-295-4560 CALIBRATION Valid To: October 31, 2019
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 SUN-TEC CORPORATION 46590 Ryan Court Novi, MI 48377 George Smolboski Phone: 248 669 3100 CALIBRATION Valid To: March 31, 2019 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. SEMBLEX CORPORATION 388 Carol Lane Campus Elmhurst, IL Ray Lafferty Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SEMBLEX CORPORATION 388 Carol Lane Campus Elmhurst, IL 60126 Ray Lafferty Phone: 630 617 5159 MECHANICAL Valid To: April 30, 2019 Certificate Number: 0794.01
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TSP / USB LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TSP / USB LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2018 Certificate Number: 0929.01
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 67 Mechanic Street Attleboro, MA Mark Gates MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 67 Mechanic Street Attleboro, MA 02703 Mark Gates 508 226 4800 MECHANICAL Valid to: February 29, 2016 Certificate Number: 1478.01 In recognition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA Douglas Reed Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA 18940 Douglas Reed Phone: 267 759 3886 MECHANICAL Valid To: April 30, 2016 Certificate Number: 0478.01 In recognition
More informationAmerican Association for Laboratory Accreditation
Page 1 of 28 R205: SPECIFIC REQUIREMENTS: CALIBRATION LABORATORY ACCREDITATION PROGRAM November 2012 2012 by A2LA All rights reserved. No part of this document may be reproduced in any form or by any means
More informationThis Specification Data Sheet brought to you by: Trinity Blvd. Fort Worth, Texas /
This Specification Data Sheet brought to you by: 15825 Trinity Blvd. Fort Worth, Texas 76155 817/465-9494 equipment@technicaldiagnostic.com www.technicaldiagnostic.com www.test-equipment-rental.com The
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 1 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com MECHANICAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI Thomas Lamoureux
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTECH RESEARCH INC. 750 Narragansett Park Drive Rumford, RI 02916-1035 Thomas Lamoureux 401-865-6440 MECHANICAL Valid to: February 28, 2018 Certificate Number:
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Comercializadora y Servicios Técnicos Súper L, S.A
More informationMeasurement Protocol for the calibration of a Fluke 744 Process Calibrator ILC 132
National Laboratory Association of South Africa - NPC P.O. Box 298 Persequor Park Pretoria, South Africa, 0020 Reg. No: 1994/002856/08 Tel: (+27) 012 349 1500 Fax: (+27) 012 349 1501 http://www.nla.org.za
More informationCalibration services Meeting our customers needs in the U.S.
Products Solutions Services Calibration services Meeting our customers needs in the U.S. Calibration services 2 Calibration services Fulfilling the needs of all industries Does the instrumentation that
More informationPhilips Lumileds. 1. Applicable LUXEON Series part numbers 1. Philips Lumileds IESNA LM-80 Test Report Overview. Design Resource DR05
Philips Lumileds IESNA LM-80 Test Report Overview Design Resource DR05 Philips Lumileds IESNA LM-80 Test Report Overview This IESNA LM-80 Test Report complies with EPA ENERGY STAR document Program Guidance
More informationAmerican Association for Laboratory Accreditation
ISO 15189 Page 1 of 17 Accredited clinical laboratories are required to meet the following additional requirements as contained in P905 - A2LA Metrological Traceability Policy for ISO 15189 Laboratory
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY PORTLAND 1 5245-A NE Elam Young Pkwy Hillsboro, OR 97124 Sandra Frank Phone: 561-529-1488 Email: sandra.frank@element.com MECHANICAL
More informationDe-Mystifying Calibration Accreditation 15 Jan 2013
De-Mystifying Calibration Accreditation 15 Jan 2013 Ryan Fischer Laboratory Accreditation Bureau Chair, NCSLI 183 Accreditation Resources Committee Bob Stern Agilent Technologies, Inc. Co-chair, NCSLI
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY BROKEN ARROW LLC 3100 North Hemlock Circle Broken Arrow, OK 74012 Gilbert Monos Phone: 918 258 6066 gil.monos@element.com MECHANICAL
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationTemperature Controllers: JC Series Digital Indicating Controllers. JC Series. High Performance Controllers...at the lowest prices anywhere!
JC Series High Performance Controllers...at the lowest prices anywhere! Structure Units available in standard DIN sizes (1/16, 1/8, and 1/4 DIN) NEMA 4X protective construction Black enclosure Programmable
More informationAmerican Association for Laboratory Accreditation
Page 1 of 14 The following pages present R205 Specific s: Calibration Laboratory Accreditation Program (dated September 2005) in checklist format. All laboratories seeking accreditation in the Calibration
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. Q LABORATORIES, INC Harrison Avenue Cincinnati, OH David Goins Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1400 Harrison Avenue Cincinnati, OH 45214 David Goins Phone: 513-471-1300 BIOLOGICAL Valid To: July 31, 2018 Certificate Number: 3026.02 In recognition of the
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 QUALITECH 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Teodor Weisz Phone: 972 3 926 6218 Email: Tedy.Weisz@ecitele.com Eli Avital Phone: 972 3 926 6170 MECHANICAL
More informationRothe Development, Inc. Houston Texas Metrology Services Division
Rothe Development, Inc. Houston Texas Metrology Services Division 1100 Hercules Ave. Ste.230 Houston, Texas 77058 Phone: 281-480-8501; Fax: 281-480-8691 Email: awood@rothe.com 1 Rothe first incorporated
More informationNATA Policy on Calibration and Measurement Traceability
NATA Policy on Calibration and Measurement Traceability Paul McMullen Sector Manager, Calibration This Session 1. VIM Definitions Calibration and Metrological Traceability 2. Previous Policy on Metrological
More informationVWR International Ltd
Orion Business Campus, Northwest Business Park, Ballycoolin, Blanchardstown, Dublin 15 Calibration Laboratory Registration number: 018C is accredited by the Irish National Board (INAB) to undertake calibration
More informationAUTOMATION-VALIDATION-VERIFICATION WITHIN AN ACCREDITED LABORATORY
AUTOMATION-VALIDATION-VERIFICATION WITHIN AN ACCREDITED LABORATORY Karl-Peter Lallmann Fluke Deutschland GmbH Heinrich-Hertz-Strasse 11 34123 Kassel / Germany Phone:++49 561 9594 651 Fax: ++49 561 9594
More informationCOOMET.EM-S1. Final Report. G. P. Telitchenko D. I. Mendeleyev Institute for Metrology Moskovsky pr., 19, St. Petersburg, , Russia
COOMET.EM-S1 Supplementary bilateral comparison of the national AC/DC voltage transfer references between VNIIM (Russia) and Ukrmetrteststandard (Ukraine) Final Report G. P. Telitchenko D. I. Mendeleyev
More informationGetting Started with ISO in Your Lab: Introduction to Resources, Training, Implementation, and Timelines for Earning Accreditation
Getting Started with ISO 15189 in Your Lab: Introduction to Resources, Training, Implementation, and Timelines for Earning Accreditation Topics What is ISO 15189? What is Accreditation? Preparing for Assessment
More informationcalibrate confidence with Accreditation What does accreditation actually mean? It s important to recognize this term for what
calibrate with confidence White Paper 17025 Accreditation What it is Why it's important What the requirements are to provide it Authored by Keith Bennett Director of Metrology Transcat Inc. July 2003/Revised
More informationMeeting the ISO/IEC Requirements for Traceability and Measurement Uncertainty. APLAC Approaches. Dr Bernard King NARL, Australia
Meeting the ISO/IEC 17025 Requirements for Traceability and Measurement Uncertainty APLAC Approaches Dr Bernard King NARL, Australia Interpretation of ISO/IEC 17025 Requirements Extensive consultation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 HERMON LABORATORIES 66 Hatachana Street (Postal Mail to P.O. Box 23) Binyamina, 3055001, ISRAEL Mr. George Shleimovich Phone: 972 4 6288 001 Email: mail@hermonlabs.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Q-LAB DEUTSCHLAND GMBH In den Hallen 30 66115 Saarbrücken, Germany Markus Weyland Phone: +49 681 857470 Email: mweyland@q-lab.com Website: www.q-lab.com MECHANICAL
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Element Materials Technology Jupiter, LLC
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited St. Paul, MN for technical competence in the field of Biological Testing This laboratory is accredited in accordance with the recognized International Standard
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. COVANCE LABORATORIES INC Wright St Madison, WI Hollis Cloninger Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COVANCE LABORATORIES INC. 2102 Wright St Madison, WI 53704 Hollis Cloninger Phone: 608 210-5501 BIOLOGICAL Valid To: November 30, 2017 Certificate Number: 2918.05
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COVANCE LABORATORIES INC. 55 East Hamblin Ave. Battle Creek, MI 49017 Hollis Cloninger Phone: 608 210-5501 BIOLOGICAL Valid to: August 31, 2019 Certificate
More informationPreparation Approval Authorisation Application date. Directive Council The President
Title Proficiency Testing Reference RT-24 Revision 02 Date 2015-10-27 NOTE: The present document represent the English version of document under reference at the specified revision. In case of conflict
More informationRosemount 1152 Alphaline Nuclear Pressure Transmitter
Product Data Sheet 00813-0100-4235 Rev BA Rosemount 1152 Rosemount 1152 Alphaline Nuclear Pressure Transmitter INDUSTRY LEADING PERFORMANCE Qualified per IEEE Std 323-1971 and IEEE Std 344-1975 Mild environment
More informationILAC P10 TRACEABILITY
ACTIVITY 1.3 TRAINING SESSION FOLLOWING THE FINDINGS FROM PREVIOUS ACTIVITIES: ILAC P10 TRACEABILITY Maria Pia Toni Slide 1 of XX REFERENCE ILAC P10:2013 ILAC Policy on the Traceability of Measurement
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PARAGON SYSTEMS 18 Basaltic Road Concord, Ontario, CANADA L4K 1G6 Tony Araujo Phone: 905 738 0447 x 237 tonya@paragonsystems.ca MECHANICAL Valid To: April 30,
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance
More informationCustomized Consulting Services & Technical Support To: Improve Productivity. Reduce Manufacturing Costs. Maintain a Level of Repeatability
CALIBRATION & Repair Services Customized Consulting Services & Technical Support To: Improve Productivity Reduce Manufacturing Costs Maintain a Level of Repeatability 17025 Accredited and ISO 9001:2008
More informationINTERPRETATION AND GUIDANCE ON THE ESTIMATION OF UNCERTAINTY OF MEASUREMENT IN TESTING
KAN-G-20 INTERPRETATION AND GUIDANCE ON THE ESTIMATION OF UNCERTAINTY OF MEASUREMENT IN TESTING Issue number : 1 April 2016 Komite Akreditasi Nasional National Accreditation Body of Indonesia Gedung I
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MIAMI VALLEY MATERIALS TESTING CENTER, LLC 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: November 30, 2019 Certificate
More informationCertified according to DIN EN ISO 9001:2008 Accredited according to DIN EN ISO/IEC 17025:2005
Viscosity Length equipment Electricity Pressure ph Volume Gauge blocks Mass Electrolyt. conductivity ZMK ANALYTIK- GmbH Density Humidity ZMK GmbH Temperature Time / frequency Torque Balances Certified
More informationISO/IEC ISO/IEC General requirements for the competence of testing and calibration laboratories
ISO/IEC 17025 ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories,
More informationREVISION OF ISO/IEC GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
REVISION OF ISO/IEC 17025 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES Presented August 10, 2017 to Environmental Measurement Symposium Warren Merkel, Co-convenor ISO/CASCO
More informationAgilent 4339B/4349B High Resistance Meters Technical Overview
Agilent 4339B/4349B High Resistance Meters Technical Overview Within Budget Without Compromise Introducing the Agilent Technologies 4339B and 4349B High Resistance Meters Used for Making Ultra- High Resistance
More informationFluke Oscilloscope Calibration Solutions. Helping you measure up to the highest standards
Fluke Oscilloscope Calibration Solutions Helping you measure up to the highest standards Fluke offers more ways to meet your oscilloscope calibration needs If your organization is like most, you are competing
More informationFriendly User Interface. Simply AUTO Mode. Support the Universal input voltage
The GPT-9600 Series, carrying a high-efficiency PWM amplifier design, generates output source up to 98% efficiency. This greatly reduces the energy loss from heat dissipation and therefore lowers the temperature
More informationDevelopment of a metrology system difference between legal metrology and industrial metrology
COOPERATION IN METROLOGY: Development of a metrology system difference between legal metrology and industrial metrology Manfred Kochsiek Metrology Consultant 1 My professional background Mechanical engineer,
More informationCRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES
CRITERIA FOR PERFORMING CALIBRATION AND INTERMEDIATE CHECKS ON EQUIPMENT USED IN ACCREDITED FACILITIES Prepared by: Technical Manager Approved by: Chief Executive Officer Approval Date: 2017-08-10 Effective
More informationPERFORMANCE OF VAISALA OZONE INTERFACE BOARD OIF411
PERFORMANCE OF VAISALA OZONE INTERFACE BOARD OIF411 White Paper B211385EN-A Performance of Vaisala Ozone Interface Board OIF411 This page intentionally left blank. 2 B211385EN-A Table of Contents CHAPTER
More informationThe role of accreditation bodies and EQA organisers in the. specifications
The role of accreditation bodies and EQA organisers in the assessment of analytical quality specifications Ian Mann Swiss Accreditation Service ian.mann@sas.ch Content Important partners and aspects of
More informationOnline data sheet MCS100E HW-C CEMS SOLUTIONS
Online data sheet MCS100E HW-C A B C D E F H I J K L M N O P Q R S T Ordering information Type MCS100E HW-C Part no. On request The exact device specifications and performance data of the product may deviate
More informationSouthern California Gas Company Customer Programs Department
Appliance Test Report SCGAT110808A Imperial ICVG-1 prototype Full-Size Gas Convection Oven Performance Test Revision 0 Southern California Gas Company Customer Programs Department Issued Date: August 2011
More informationOur Quality Policy. The fundamental priorities of our company are:
Wellington Laboratories Inc. has provided high quality reference standards, primarily for environmental contaminants, since its inception in 1980. By utilizing the combined expertise of skilled synthetic
More informationFQS Accreditation for forensic testing agencies NEMC ANSI-ASQ National Accreditation Board
FQS Accreditation for forensic testing agencies ISO Guide d 34 for f Environmentall Labs b NEMC 2012 ANSI-ASQ National Accreditation Board ISO/IEC 17025 Calibration and Testing Labs ISO/IEC 17020 Inspection
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 EUROFINS TESTING TECHNOLOGY (SHENZHEN) CO., LTD. 4/F, Building #3 Runheng Electronic Park Luxian Road 2 nd Road, Xin an Street, Bao an District Shenzhen City,
More informationLecturer introduction
Lecturer introduction Lecturer, affiliation Dr. Bojan Acko, assistant professor University of Maribor Faculty of Mechanical Engineering SI-2000 Maribor, Smetanova 17 Slovenia Laboratory for Production
More informationAgilent 8490G Coaxial Attenuators
Agilent 849G Coaxial Attenuators Technical Overview Key specifications Maximize your operating frequency range for DC to 67 GHz application Minimize your measurement uncertainty with low SWR of 1.45 up
More informationCALIBRATION SYSTEM CERTIFICATE
CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)
More informationEstablished in 2011, Deep Lab Enterprises is the foremost manufacturer, supplier and wholesaler of
+91-8048019518 Deep Lab Enterprises https://www.indiamart.com/deeplabenterprises/ Established in 2011, Deep Lab Enterprises is the foremost manufacturer, supplier and wholesaler of Environmental Equipment,
More informationCH2M HILL Portland, Oregon
MASTER COPY Includes Includes CD-ROM CD-ROM PACIFICORP IRON GATE PROJECT Turbine Performance and Air Admission Tests Prepared for CH2M HILL Portland, Oregon Revision B December 2008 Prepared by PRINCIPIA
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATLAS WEATHERING SERVICES GROUP 1500 Bishop Court Mt. Prospect, IL 60056 Lorenzo Tyler Phone: 305 245 3659 Fax: 773-327-5787 MECHANICAL Valid To: May 31, 2018
More informationA016 Traceability of measurement results compared to national and international measurement standards
08.04.2016 Version 08 Page 1 de 9 A016 Traceability of measurement results compared to national and international measurement standards Modifications: p 2 South Lane Tower I 1, avenue du Swing L-4367 Belvaux
More informationPROACTIVE APPROACHES. for QUALITY MANAGEMENT. Anabela Martins Micoteca da Universidade do Minho
PROACTIVE APPROACHES for QUALITY MANAGEMENT Anabela Martins Micoteca da Universidade do Minho 1 Standard development procedure Reference sources Structure Interpreting the provisions Recognition scheme
More informationA2LA. R104 - General Requirements - ISO-IEC Accreditation of Field Testing and Field Calibration Laboratories
and Field Calibration Page 1 of 15 R104 - General Requirements - ISO/IEC 17025:2017 Accreditation of Field Testing and Field Calibration 2018 2018 by A2LA All rights reserved. No part of this document
More informationMVS. Traceability Document MULTICHANNEL VERIFICATION SYSTEM
MVS MULTICHANNEL VERIFICATION SYSTEM Traceability Document 25 Bradley Drive Westbrook, Maine USA 04092-2013 tel: 207-854-0860, toll free: 1-888-406-3463 fax: 207-854-0867 email: orders@artel-usa.com email:
More informationSCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 SCP SCIENCE 21800 Clark Graham Baie d'urfe, Quebec H9X 4B6 CANADA David Smith Phone: 514 457 0701 dsmith@scpscience.com REFERENCE MATERIAL PRODUCER Valid To:
More informationSP3S-AQ2-01 AIR QUALITY SENSOR S March, 2004
SP3S-AQ2-01 SPECIFICATIONS MODEL: TYPE: SPECIFICATION No. DATE OF ISSUE SPECIFICATIONS FOR: SP3S-AQ2-01 AIR QUALITY SENSOR S-0403-03 18 March, 2004 Dimensions 0.7 Status Name Date Original Junko Yanagitani
More informationThe new ISO/IEC 17025:2017
The new ISO/IEC 17025:2017 By Dr. George Anastasopoulos Director, Conformity assessment, IAS Email: ganastasopoulos@iasonline.org Introduction - Background information ISO/IEC 17025 was first issued in
More informationRosemount 1154 Alphaline Nuclear Pressure Transmitter
Product Data Sheet 00813-0100-4514 Rev BA Rosemount 1154 Rosemount 1154 Alphaline Nuclear Pressure Transmitter INDUSTRY LEADING PERFORMANCE Qualified per IEEE Std. 323-1974 and IEEE Std. 344-1975 1.1 10
More informationISO/IEC ISO/IEC General requirements for the competence of testing and calibration laboratories
ISO/IEC 17025 ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories,
More informationComparative measurements of two ESD-swivel chairs with different castors and glides used on different ESD-flooring systems.
EOS/ESD Symposium for Factory Issues Helsinki - Stockholm, October 2016 Comparative measurements of two ESD-swivel chairs with different castors and glides used on different ESD-flooring systems Jürgen
More informationAUGUST 14, 2006 TEST REPORT # RANDOM VIBRATION TEST SERIES PROBE SERIES PROBE TEST SOCKET INTERCONNECT DEVICES, INC.
AUGUST 14, 2006 TEST REPORT #206271 RANDOM VIBRATION TEST 101377-000 SERIES PROBE 204130-036 SERIES PROBE TEST SOCKET INTERCONNECT DEVICES, INC. APPROVED BY: MAX PEEL SENIOR FELLOW CONTECH RESEARCH, INC.
More informationM16 M20 M25 M207 M51 M100 M200
Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products
More informationILAC-P10:2002. ILAC Policy on Traceability of Measurement Results
ILAC-P10:2002 ILAC Policy on Traceability of Measurement Results Copyright ILAC 2002 ILAC encourages the authorised reproduction of its publications, or parts thereof, by organisations wishing to use such
More informationTECHNICAL AND PRODUCTION REQUIREMENTS of ISO Guide 34:2009
SANAS Accr. No/s. TECHNICAL AND PRODUCTION REQUIREMENTS of ISO Guide 34:2009 Date/s of evaluation Assessor/s & Observers Facility Area / field of Representative operation This report covers the following:
More informationApplication for Accreditation General Laboratories ISO/IEC 17025
Date: January 2015 F3.15 Please use BLOCK CAPITALS Name of Organisation Address of Organisation providing Testing/Calibration services Tel: Fax: E-mail: Name of contact Web-site: Address of contact (if
More informationA2LA. P113a Policy on Reference Material Traceability for Life Sciences Testing Laboratories
Page 1 of 6 Introduction The Life Sciences Advisory Committee realizes that the traceability of reference materials (RMs) per the requirements of ISO/IEC 17025:2005 (Section 5.6.3) or ISO/IEC 17025:2017(Section
More informationexpert 2600 Series Universal Testing Systems
expert 600 Series Universal Testg Systems System Brochure expert 600 Series Universal Testg Systems ADMET s most versatile Universal Testg Systems coverg the widest range of applications and load capacities
More informationSCOPE OF ACCREDITATION TO ISO GUIDE LECO CORPORATION 3000 Lakeview Avenue St. Joseph, MI Mr. Dennis Lawrenz Phone:
SCOPE OF ACCREDITATION TO ISO GUIDE 34-2009 LECO CORPORATION 3000 Lakeview Avenue St. Joseph, MI 49085 Mr. Dennis Lawrenz Phone: 269 982 2277 REFERENCE MATERIAL PRODUCER Valid To: May 31, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CARMEL-ENVIRONMENTAL TESTS LTD. 33 Alexander Yanai Street Petach Tikva, Israel 49277 Avi Saban Phone: 972-549932413 MECHANICAL Valid To: May 31, 2018 Certificate
More informationAbsolutely. Positively. Precise.
1 Absolutely. Positively. Precise. Troemner s Philosophy Calibration & Traceability Philosophy Troemner is the world s largest independent mass calibration company. Our philosophy is to provide the highest
More informationOnline data sheet SMC209 C CEMS SOLUTIONS
Online data sheet SMC209 C A B C D E F H I J K L M N O P Q R S T Ordering information Type SMC209 C Part no. On request The exact device specifications and performance data of the product may deviate from
More informationMultifunction HVAC and IAQ Meter
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com testo 435 Multifunction HVAC and IAQ Meter NEW! The newest technology for temperature,
More informationGeneral Requirements for the Competence of Testing and Calibration Laboratories
ISO 17025:2005 POSITION PAPER General Requirements for the Competence of Testing and Calibration Laboratories EXECUTIVE SUMMARY This position paper provides a high-level overview of how LabVantage supports
More informationRT mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator. Features. General Description. Applications. Ordering Information RT9193-
RT9193 3mA, Ultra-Low Noise, Ultra-Fast CMOS LDO Regulator General Description The RT9193 is designed for portable RF and wireless applications with demanding performance and space requirements. The RT9193
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK (Environmental & Electrical Product Test Laboratory) 15 Enterprise Way Aviation Park West Bournemouth Airport Christchurch Dorset BH23 6HH
More informationTAIE. Features. FY900 (96mm X 96mm) Application:Control temperature,humidity, FY Series Digital PID Controller
TAIE FY Series Digital PID Controller FY900 (96mm X 96mm) Application:Control temperature,humidity, FY series controllers are microprocessor based controllers. Which have been Designed with high accuracy
More informationAccredited Laboratory A2LA has accredited WUXI APPTEC, INC. Marietta, GA for technical competence in the field of
Accredited Laboratory A2LA has accredited Marietta, GA for technical competence in the field of Biological Testing This laboratory is accredited in accordance with the recognized International Standard
More informationIAF MLA Document. Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies.
IAF MLA Document Guidance for the Exchange of Documentation among MLA Signatories for the Assessment of Conformity Assessment Bodies Issue 3 (IAF ML 1:2016) Issue 3 Guidance for the Exchange of Documentation
More informationIndustrial Solutions. Quality is Our Driving Force. interfaceforce.com
Industrial Solutions Quality is Our Driving Force interfaceforce.com The high performance you ve come to know and trust from Interface products is also available in a rugged industrial configuration. Since
More informationPAKISTAN AERONAUTICAL COMPLEX, KAMRA MIRAGE REBUILD FACTORY
PAKISTAN AERONAUTICAL COMPLEX, KAMRA MIRAGE REBUILD FACTORY TENDER NOTICE NO MRF/13-14/15 Dated 15 Jan, 2014. 1. Sealed tenders in the name of MD MRF PACB Kamra on F.O.R Basis from Pre Qualified Contractors
More information