DOW CORNING TORAY SH 780 Sealant

Transcription

1 Product Information Silicone Sealant SH 78 Sealant FEATURES & BENEFITS One-component sealant for ease of use Cures to a flexible silicone elastomer Nonacidic cure enables use on a variety of substrates Non-sag Excellent adhesion properties for substrate such as various metals (except copper/brass), glass, tiles, earthenwares, etc. Greater UV stability and temperature and weather resistance than organic sealants Inherently waterproof Remains flexible over a wide temperature range (-4 to 15 C) Lasts longer and needs to be replaced less often than many organic sealants, which reduces lifetime costs and contributes to sustainability Neutral (Oxime type), one-part silicone sealant JIS A 5758 G-LM, G-3SLM (SR-1-93G) specified sealant APPLICATIONS General-purpose sealing and bonding Space-filling rubber adhesive Caulking and sealing window and door frames TYPICAL PROPERTIES Specification Writers: These values are not intended for use in preparing specifications. Please contact your local Dow Corning sales office or your Global Dow Corning Connection before writing specifications on this product. Test* Property Unit Result JIS A 1439 Tack free (JIS) minutes 6 JIS K 6249 Density g/cm JIS K 6249 Hardness (JIS type A) 19 JIS K 6249 Tensile strength MPa 1.8 JIS K 6249 Elongation % 6 *JIS=Japanese Industrial Standard COMPOSITION One part Neutral cure (Oxime type) RTV sealant DESCRIPTION SH 78 Sealant is a one part, neutral-cure (Oxime type) RTV sealant. It easily extrudes in any weather and cures quickly at room temperature. This cold-applied, non-sagging silicone material cures to silicone rubber upon exposure to atmospheric moisture. HOW TO USE Consult the Sealant Hand Book, JASS8 Waterproofing Work, and Technological Indicator Concerning Watertight Design and Construction of the Outside Wall Joint. APPROVALS/ SPECIFICATIONS This sealant meets or exceeds the requirements of: JIS A5758 G-LM G-3SLM (SR-1-93G) JSIA F COLORS SH 78 Sealant is available in several colors including: clear, white, aluminum, gray, light-gray 2, umber, dark brown, black, and stain. PRIMER Use primers to increase adhesion to glass, metal, and porous materials. It is recommended to test adhesion properties with the substrate prior to application.

2 Table 1: JIS A5758 (G-LM/G-3SLM) Test Result (with Primer-D3 (RF)) Properties Condition Unit Results Specification Slump (Length) 5 ± 2 C mm 3 or less 5 ± 2 C mm 3 or less Slump (Breadth) 5 ± 2 C mm 3 or less 5 ± 2 C mm 3 or less Change in volume - % 6 or less 6% Modulus 23 ± 2 C N/mm 2 Glass.3.4 or less N/mm 2 Aluminum.3.4 or less - ± 2 C N/mm 2 Glass.3.6 or less N/mm 2 Aluminum.3.6 or less Durability (93G) 23 ± 2 C - Pass No failure Adhesion properties at maintained extension Adhesion properties after exposure to artificial light through glass - ± 2 C - Glass Pass No failure Adhesion properties at variable temperature Adhesion properties after immersion in water Elastic recovery (G-LM/G-3SLM) 23 ± 2 C 23 ± 2 C % 95/9 6 or more Table 2: Tensile Adhesion Properties (JIS A1439: with Primer-D3 (RF), Tensile speed: 5 C) Condition 5% Modulus (N/mm 2 ) Max. Strength (N/mm 2 ) Elongation at Max. Strength (%) Elongation at Break (%) Aluminum Initial ± 2 C for 14 days ± 2 C for 7 days in water Glass Initial ± 2 C for 14 days ± 2 C for 7 days in water In Xenon Weather Meter for 13 hours ; September 23 XIAMETER is a registered trademark of Dow Corning Corporation. Form No A-1 16 Dow Corning Corporation, a wholly owned subsidiary of The Dow Chemical Company. All rights reserved. 2

3 Joint depth D (mm) Joint depth D (mm) Stress (N/mm 2 ) Skin Over Time (min) Deep Section Cure (mm) Figure 1: Surface Cure Speed Figure 2: Deep Section Cure C 23 C/5%RH 4 C/9%RH 3 4 Temperature ( C) Time (days) Figure 3: Stress Strain Curve (JIS A1439 test piece) 1..8 Compress.6.4 Extension.2 Shear. % % 4% 6% 8% % 1% JOINT DESIGN The joint design must conform to JASS8 (Construction standard of Architect Institute of Japan) and Technological Indicator Concerning Watertight Design and Construction of the Outside Wall Joint. Figure 4: Setting of Joint Depth Strain (%) Joint width W (mm) General Joint Joint width W (mm) Glazing Joint 16; September 23 XIAMETER is a registered trademark of Dow Corning Corporation. Form No A-1 16 Dow Corning Corporation, a wholly owned subsidiary of The Dow Chemical Company. All rights reserved. 3

4 Table 3: General Adhesion Properties Test method: JASS8 Simple adhesion test Primer: Primer-D3 (RF) or Primer-B Cure condition: 23 C/5% RH 7 days Substrate Primer Cohesion failure % Float Glass Primer-D3 (RF) % Glass Metal Coating Plastic Rubber Porous Substrate Wood Heat Reflecting Glass Primer-D3 (RF) % Supper Heat Reflecting Glass Primer-D3 (RF) % Heat Absorbing Glass Primer-D3 (RF) % Porcelain-clad Primer-D3 (RF) % Ceramic Tile Primer-D3 (RF) % Anodized Aluminum Primer-D3 (RF) % Electrolytic colorized Aluminum Primer-D3 (RF) % SPCC-SB (Ni plated) Primer-D3 (RF) % SUS Primer-D3 (RF) % Hot dip Zincing Primer-D3 (RF) % Acryl coating Primer-D3 (RF) % Melamine coating Primer-D3 (RF) % PVC coating Primer-D3 (RF) % PET Glass Primer-D3 (RF) % Epoxy Glass Primer-D3 (RF) % Poly Stylene Primer-D3 (RF) % Rigid PVC Primer-D3 (RF) % Silicone Rubber Primer-D3 (RF) % Modified Silicone Rubber Primer-D3 (RF) % Poly Sulfide Rubber Primer-D3 (RF) % Urethane Rubber Primer-D3 (RF) % Mortar, Concrete Primer-B % ALC Primer-B % S late Siding Board Primer-B % Cedar, Cypress Primer-B % Luan Primer-B % Notes Adhesion properties might be different according to the manufacturer and the kind. The adhesion test is recommended before apply sealant. The use of the primer is recommended for to improve adhesion properties and durability. There is a possibility that the sealant changes in quality by the contact of EPDM and CR with the sealant. 16; September 23 XIAMETER is a registered trademark of Dow Corning Corporation. Form No A-1 16 Dow Corning Corporation, a wholly owned subsidiary of The Dow Chemical Company. All rights reserved. 4

5 Recommended primers include: Primer-D3 (RF) for glass, metal, varnished metal Primer-B for wood, mortar, concrete Refer to the primer data sheet for details. Please contact Dow Corning Toray Sales Engineer for specific advice. HANDLING PRECAUTIONS The substrate surface should be clean and dry. After applying sealant, it is necessary to protect the surface from rain for at least one day. It is necessary to prevent the joint from extensive movement during cure. A stain may be visible around the joint when used on an outside wall joint. When using an air gun, air pressure should be controlled below.3 MPa. Sealant quality may be affected by contact with EPDM and Chloroprene. Product evolves methyl ethyl ketoxime (MEKO) which may discolor/corrode brass and copper or crack acryl resin and polycarbonate. Please do not use it for these substrates. When curing an alcohol sealant on/near or under a cured oxime sealant, it may discolor. When curing an oxime sealant on/near or under a cured alcohol sealant, it also may discolor. Do not use near an open flame. Not recommended for use at continuous temperatures above 15 C. Do not use on aquariums. Solvent based primers are highly flammable. Keep away from open flame. PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE HANDLING, READ PRODUCT AND SAFETY DATA SHEETS AND CONTAINER LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD INFORMATION. THE SAFETY DATA SHEET IS AVAILABLE ON THE DOW CORNING WEBSITE AT DOW CORNING.COM, OR FROM YOUR DOW CORNING SALES APPLICATION ENGINEER, OR DISTRIBUTOR, OR BY CALLING DOW CORNING CUSTOMER SERVICE. USABLE LIFE AND STORAGE When stored in a cool and dark space, SH 78 Sealant has a shelf life of 12 months from the date of manufacture. It might be discolored during storage under high temperature. Refer to product packaging for Date of Manufacture. PACKAGING INFORMATION SH 78 Sealant is supplied in 33 ml disposable plastic cartridge. Please contact Dow Corning Toray Sales Engineer for specific advice. LIMITATIONS This product is neither tested nor represented as suitable for medical or pharmaceutical uses. HEALTH AND ENVIRONMENTAL INFORMATION To support customers in their product safety needs, Dow Corning has an extensive Product Stewardship organization and a team of Product Safety and Regulatory Compliance (PS&RC) specialists available in each area. For further information, please see our website, dowcorning.com or consult your local Dow Corning representative. LIMITED WARRANTY INFORMATION PLEASE READ CAREFULLY The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information should not be used in substitution for customer s tests to ensure that our products are safe, effective, and fully satisfactory for the intended end use. Suggestions of use shall not be taken as inducements to infringe any patent. Dow Corning s sole warranty is that our products will meet the sales specifications in effect at the time of shipment. Your exclusive remedy for breach of such warranty is limited to refund of purchase price or replacement of any product shown to be other than as warranted. TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, DOW CORNING SPECIFICALLY DISCLAIMS ANY OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY. DOW CORNING DISCLAIMS LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. We help you invent the future. dowcorning.com 16; September 23 XIAMETER is a registered trademark of Dow Corning Corporation. Form No A-1 16 Dow Corning Corporation, a wholly owned subsidiary of The Dow Chemical Company. All rights reserved. 5