MATERIAL SAFETY DATA SHEET Commercial Compressed Chemical Cylinders (NOVEC Fire Extinguishing Agent)

Size: px

Start display at page:

Download "MATERIAL SAFETY DATA SHEET Commercial Compressed Chemical Cylinders (NOVEC Fire Extinguishing Agent)"

Ronald Cox
5 years ago
Views:

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS Product Name Other Trade Names Product Description Manufacturer/Supplier MATERIAL SAFETY DATA SHEET Chemical Compressed Cylinders (NOVEC 1230 Fire

1 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS Product Name Other Trade Names Product Description Manufacturer/Supplier MATERIAL SAFETY DATA SHEET Chemical Compressed Cylinders (NOVEC 1230 Fire Extinguishing Agent) (FK ) Streaming and flooding fire protection Minimax USA LLC Address 4030 E. Quenton Drive Suite 112 Mesa, AZ USA Phone Number (888) (480) ChemTel Number (888) (for emergencies only) (813) (International) Revision Date: February 22,2012 MSDS Date: July 9, HAZARDS IDENTIFICATION Non Hazardous Liquid Routes of Entry - Eye contact - Inhalation - Skin contact Carcinogenic Status See Section 11 - Toxicity Target Organs - Respiratory System - Skin - Eye Health Effects - Eyes Contact with the eyes during product use is not expected to result in significant irritation. Health Effects - Skin Contact with the skin during product use is not expected to result in significant irritation. Health Effects - Ingestion If thermal decomposition occurs: May be harmful if inhaled. Health Effects - Inhalation No health effects are expected 3. COMPOSITION/INFORMATION ON INGREDIENTS Component Name CAS#/Codes Concentration R Phrases EU Classification 1,1,1,2,2,4,5,5-NONAFLUORO-4- (TRIFLUOROMETHYL)-3- PENTANONE % None None Keep container in a well ventilated place Revision Date: February 22, 2012 Page 1 of 6

2 MATERIAL SAFETY DATA SHEET 4. FIRST AID MEASURES Eyes No need for first aid is anticipated Skin No need for first aid is anticipated Ingestion If signs/symptoms develop, remove person to fresh air. If signs/symptoms persist medical attention. Inhalation Move victim to fresh air. Obtain medical attention immediately for any breathing difficulty. If Swallowed No need for first aid is anticipated. 5. FIRE - FIGHTING MEASURES Extinguishing Media This preparation is used as an extinguishing agent and therefore is not a problem when trying to control a blaze.. Unusual Fire and Explosion Hazards Pressurized cylinders may explode in heat of fire. Protective Equipment for Fire-Fighting Wear full protective clothing and self-contained breathing apparatus as appropriate for specific fire conditions. 6. ACCIDENTAL RELEASE MEASURES Observe precautions from other sections. Call 3M- HELP Line ( ) for more information on handling and managing the spill. Ventilate the area with fresh air. Contain spill, cover drains, working from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent material. Mix in sufficient absorbent until it appears dry. Collect as much of the spilled material as possible. Clean up residue. Place in a metal container approved for transportation by appropriate authorities. Seal the container. Dispose of collected material as soon as possible. 7. HANDLING AND STORAGE Pressurized cylinders should be properly stored and secured to prevent falling or being knocked over. Do not drag, slide or roll extinguishers. Do not drop cylinders or permit them to strike against each other. Never apply flame or localized heat directly to any part of the extinguisher or plastic container. Store pressurized cylinders and plastic containers away from high heat sources. Storage area should be: - cool - dry - well ventilated - under cover - out of direct sunlight Revision Date: February 22, 2012 Page 2 of 6

3 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational exposure limits are listed below, if they exist. MATERIAL SAFETY DATA SHEET 1,1,1,2,2,4,5,5-Nonafluoro-4-(Trifluoromethyl)-3-Pentanone 150 ppm TWA Engineering Control Measures Use with adequate ventilation. When used in large volumes, use local exhaust ventilation. Respiratory Protection Under normal use conditions, airborne exposures are not expected to be significant enough to require respiratory protection. Avoid breathing of vapors, mists or spray. If thermal decomposition occurs, wear supplied air respiratory protection. Hand Protection Use leather gloves when handling cylinders Eye Protection Chemical goggles or safety glasses with side shields Body Protection Normal work wear 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State Liquid Color Clear colorless Odor Odorless Specific Gravity (WATER=1) 1.6 Boiling Range/Point ( C/F) 49 degrees C Flash Point (PMCC) ( C/F) Not Flammable Solubility in Water Not applicable Vapor Density (Air = 1) 11.6 Vapor Pressure 244 mmhg Evaporation Rate (BUOAC=1) >1 10. STABILITY AND REACTIVITY Stability Stable under normal conditions. Conditions to Avoid - Avoid direct sunlight and ultraviolet light Materials to Avoid - Strong bases - Amines - Alcohols Hazardous Polymerization Will not occur. Revision Date: February 22, of 6 Page

4 MATERIAL SAFETY DATA SHEET 10. STABILITY AND REACTIVITY Hazardous Decomposition Products - Carbon monoxides - carbon dioxide hydrogen fluoride Hazardous Decomposition: Hydrogen fluoride has an ACGIH Threshold Limit Value of 3 Parts per million (a fluoride) as a Ceiling Limit and an OSHA PEL of 3 ppm of fluoride as an eight hour Time Weighted Average and 6 ppm of fluoride as a short term Exposure Limit. The odor threshold for HF is 0.04 ppm, providing good warning properties for exposure. 11. TOXICOLOGICAL INFORMATION Acute Toxicity Low order of acute toxicity. Chronic Toxicity/Carcinogenicity This product is not expected to cause long term adverse health effects. Genotoxicity This product is not expected to cause any mutagenic effects. Reproductive/Developmental Toxicity This product is not expected to cause adverse reproductive effects. 12. ECOLOGICAL INFORMATION Persistence/Degradability No relevant studies identified. Bio-accumulation No relevant studies identified. Ecotoxicity Please refer to existing literature on TFA 13. DISPOSAL CONSIDERATIONS EPA Hazardous Waste Number (RCRA): Not regulated Waste Disposal Method: Incineration, Combustion products will include HF. Facility cable of handling halogenated material. Since regulations vary, consult applicable regulations or authorities before disposal. 14. TRANSPORT INFORMATION DOT CFR Data Not regulated UN Proper Shipping Name NOVEC (FK ) UN Class UN Number 1956 UN Packaging Group II Revision Date: July 9, 2010 Page 4 of 6

5 MATERIAL SAFETY DATA SHEET 15. REGULATORY INFORMATION US REGULATIONS (Federal, State) and INTERNATIONAL CHEMICAL REGISTRATION LAWS TSCA Listing The one components of this product is included in TSCA inventories. EINECS Listing One or more of the components of this product have been notified to (ELINCS) (European List of Notified or New Chemical Substances). Certain restrictions apply All the components of this product are listed on China s Inventory of Chemical Substances. The Component of this product are in compliance with the new chemical notification requirement for the Korean Existing Chemicals Inventory. WHMIS Canadian Workplace Hazardous Material Identification System Rating This product is rated A Compressed Gas. The components of this product are in compliance with the chemical notification requirements of the National Industrial Chemical Notification and Assessment Scheme (NICNAS) of Australia, the Canadian Environmental Protection Act (CEPA) and the Ministry of Economy, Trade and Industry of Japan. SARA Title III Sect. 311/312 Categorization - Immediate (Acute) Health Hazard - Pressure Hazard SARA Title III Sect. 313 This product does not contain any chemicals that are listed in Section 313 at or above de minimis concentrations. Contact 3M for more information or (651) (24 hours) 16. OTHER INFORMATION NFPA Ratings NFPA Code for Health - 1 NFPA Code for Flammability - 0 NFPA Code for Reactivity - 0 NFPA Code for Special Hazards None National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are presented by short-term exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to be generated in significant quantities. Revision Date: February 22, 2012 Page 5 of 6

6 HMIS Ratings HMIS Code for Health - 1 HMIS Code for Flammability - 0 HMIS Code for Reactivity - 0 HMIS Code for Personal Protection - See Section 8 MATERIAL SAFETY DATA SHEET Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of the chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for the use in emergency situations. HMIS(r)) ratings are to be used with a fully implemented HMIS(r)) program. HMIS(r)) is a registered mark of the National Paint and Coatings Association (NPCA). Prepared By: Tom Lenartowicz The information contained herein is based on data believed to be accurate. However, no representation, warranty, or guarantee is made to its accuracy, reliability or completeness. It is the user's responsibility to satisfy him or herself as to the suitability and completeness of such information for its own particular use. Minimax USA LLC. assumes no responsibility for personal injury or property damage resulting from use, handling or from contact with this product. Revision Date: February 22, 2012 Page 6 of 6

EMERGENCY PHONE: or (651) (24 hours)

EMERGENCY PHONE: or (651) (24 hours) Material Safety Data Sheet Copyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)