1. CHEMICAL PRODUCT & MANUFACTURER S DETAILS

Transcription

1 MSDS 4-Hydroxypyridine-3-sulfonic acid Page 1 of 6 MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT & MANUFACTURER S DETAILS PRODUCT NAME : 4-Hydroxypyridine-3-sulfonic acid MANUFACTURER FACTORY & REGISTERED OFFICE:, Bhartiagram, Gajraula District: Jyotiba Phuley Nagar Uttar Pradesh , India PHONE NO: unto Contact Department-Safety: Extension 7424 FAX NO : EMERGENCY PHONE: HEAD OFFICE: Plot 1-A, Sector 16-A, Institutional Area, Noida, Uttar Pradesh India. PHONE NO: Contact department: EHS FAX NO : support@jubl.com 2. CHEMICAL IDENTIFICATION CHEMICAL NAME : 4-Hydroxypyridine-3-sulfonic acid SYSTEMATIC NAME : 4-Hydroxy-3-pyridinesulfonic acid SYNONYMS : 4-Hydroxy-3-pyridinsulfonsäure (DE) ácido 4-hidroxi-3-piridinasulfónico (ES) acide 4-hydroxy-3-pyridinesulfonique (Fr) CHEMICAL CLASSIFICATION : Substituted 3-pyridinesulfonic acid CHEMICAL FORMULA : C 5 H 5 NO 4 S C.A.S. NO : EINECS : HAZARD IDENTIFICATION & HEALTH HAZARD Overview: Corrosive solid, acidic, organic, causes burns. Light sensitive. Eye : Causes burns Skin : Causes skin burns.. Ingestion : May be harmful if swallowed. Corrosive substance. Risk of internal burns. Inhalation : Causes respiratory tract irritation. Corrosive. 4. FIRST AID MEASURES Seek medical attention, pass on all available product information. Ingestion: In case of large amount of ingestion, give water to drink, do not induce vomiting and get immediate medical advice Inhalation: Remove to fresh air and get medical attention for any breathing difficulty. Mouth to mouth resuscitation should be avoided. Use alternative methods, preferably with oxygen or

2 MSDS 4-Hydroxypyridine-3-sulfonic acid Page 2 of 6 4. FIRST AID MEASURES compressed air driven apparatus. Seek immediate medical attention. Eye Contact: If substance has got into eyes, wash out with water for at least 15 minutes and seek immediate medical attention. Skin Contact: Remove contaminated clothing immediately and drench affected skin with plenty of water. Seek immediate medical attention. 5. FIRE FIGHTING MEASURES Flash Point: The product has a melting point ~ C. Like any organic chemical it may burn in presence of a fire. Extinguishing media: Carbon dioxide, dry chemical powder, chemical foam and water fog. Avoid the use of water jet to extinguish chemical fires. Keep containers cool with water. Special fire fighting procedures: As in any chemical fire wear a self-contained breathing apparatus MSHA/NIOSH (or equivalent approved) and full protective gloves. Do not permit the chemical/ fire effluent to enter the environment as far as possible. Unusual fire and explosion hazard: During combustion toxic fumes of Carbon monoxide, Hydrogen cyanide, oxides of nitrogen and Oxides of sulphur may be emitted.. 6. ACCIDENTAL RELEASE MEASURES General Information : Use proper personal protective equipment as indicated in Section 8. Use acid resistant equipment as far as possible. Drench all equipment with water before transporting from incident. Spills / Leaks : Sweep up and collect material in covered containers and wash spill site after material pick up is complete. Avoid raising dust. 7. HANDLING AND STORAGE Handling : This product should be handled only by, or under the close supervision of, trained personnel. It should always be handled in an efficient fume hood or equivalent system. The toxicological and physiological properties of many compounds are not yet well determined and new hazardous products may arise from reactions between chemicals. Care should be taken to prevent this chemical from coming into contact with the skin or eyes and from contaminating personal clothing. Use acid resistant equipment when handling this chemical. Storage : Store in a cool, dry, well ventilated area away from sources of heat, combustible materials, and incompatible substances. Keep container tightly closed when not in use. Product is light sensitive.

3 MSDS 4-Hydroxypyridine-3-sulfonic acid Page 3 of 6 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Exposure controls: Use adequate general or local exhaust ventilation to keep air borne concentrations below the permissible exposure limits. Use process enclosures, local exhaust ventilation, or other engineering controls to control air borne levels. Water bath and emergency showers are required in facilities using this chemical. Personal Protection Wash thoroughly after handling. Drench contaminated clothing with water. Respiratory protection that meets OSHA's 29 CFR and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use (See exposure controls). Exposure Limits Not available from ACGIH, OSHA, NIOSH or any other agency.

4 MSDS 4-Hydroxypyridine-3-sulfonic acid Page 4 of 6 9. PHYSICOCHEMICAL PROPERTIES & FIRE/ EXPLOSION HAZARD PHYSICAL STATE :Crystalline powder APPEARANCE :White to off-white solid ODOUR : Odorless BOILING POINT MELTING POINT : ~ C FLASH POINT VAPOUR PRESSURE DENSITY : VAPOR DENSITY (AIR=1) SOLUBILITY IN WATER : Soluble ph (2% aq. Solution) : ~1.0 FLAMMABILITY LEL UEL AUTO IGNITION TEMPERATURE :Data not available EXPLOSIVE SENSITIVITY TO IMPACTS EXPLOSIVE SENSITIVITY TO STATIC ELECTRICITY COMBUSTIBLE LIQUID FLAMMABLE MATERIAL PYROPHORIC MATERIAL : EXPLOSIVE MATERIAL OXIDISER ORGANIC PEROXIDE Data not available CORROSIVE MATERIAL HYGROSCOPIC /WATER REACTIVITY :Data not available STABILITY INCOMPATIBILITY DECOMPOSITION TEMPERATURE MOLECULAR WEIGHT : STABILITY AND REACTIVITY Stability: Not available. Conditions to Avoid: Incompatible materials, strong oxidants. Incompatibilities: Strong oxidizing agents, Strong acids, bases. Hazardous Decomposition Products: Nitrogen oxide, oxides of sulfur and carbon monoxide. Irritating and toxic fumes. Hazardous Polymerization: Not expected.

5 MSDS 4-Hydroxypyridine-3-sulfonic acid Page 5 of TOXICOLOGICAL INFORMATION ACUTE EFFECTS: No data available. This product is likely to be skin corrosive, corrosive to the respiratory and gastrointestinal tract. CHRONIC EFFECTS: No data available TOXICITY: RTECS#: Not available for this chemical. ORL RAT LD50 : Not available No quantifiable data available. CARCINOGENICITY: NTP, IARC, OSHA-not listed. EU CMR list: Not listed. Not known to be carcinogenic (Relating to Points 29, 30 and 31 of Annex I of Directive 76/769/EEC). 12. ECOLOGICAL INFORMATION Ecotoxicity. Biodegradation. Bioaccumulation: Not likely. Do not permit this chemical to enter environmental bodies. 13. DISPOSAL CONSIDERATION Recover spilled product in vented container fitted with absorption filter. Consult a disposal expert and local regulations for disposal of this chemical. 14. TRANSPORT INFORMATION IMO/IMDG/IATA Proper Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.(4-Hydroxy-3- pyridinesulfonic acid) UN Number: 3261 Packing Group: III Hazard Class: REGULATORY INFORMATION European Information: EC #: Pictogram: C This chemical substance is not listed in a priority list (as foreseen under Council Regulation (EEC) No 793/93 on the evaluation and control of the risks of existing chemicals. Risk Phrases R 34 Causes burns. Safety Phrases S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)..

6 MSDS 4-Hydroxypyridine-3-sulfonic acid Page 6 of REGULATORY INFORMATION US Regulatory Information TSCA CAS# is not listed on the EPA TSCA Section 8 (b) Chemical inventory, based on current information. It may be used for research purposes only. Australian Inventory of Chemical Substances (AICS) CAS # ' ' No results returned. Canada: Not listed on DSL/NDSL. 16. OTHER INFORMATION Information contained in this MSDS is believed to be correct but no representation, guarantee or warranties of any kind are made as to its accuracy, suitability for a particular application or results to be obtained from them. This MSDS shall be used as a guide only. JUBILANT ORGANOSYS LIMITED makes no warranties expressed or implied of the adequacy of this document for any particular purpose. Document Name: 0215A01 Div 46 msds 4-Hydroxypyridine-3-sulfonic acid Date: July 21, 2005 Revision Number: 01