Mechatronics Engineering and Modern Information Technologies in Industrial Engineering

Size: px
Start display at page:

Download "Mechatronics Engineering and Modern Information Technologies in Industrial Engineering"

Transcription

1 Applied Mechanics and Materials Vols Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Selected, peer reviewed papers from the 2014 International Conference on Mechatronics Engineering and Modern Technologies in Industrial Engineering (MEMTIE 2014), October 25-26, 2014, Changsha, Hunan, China von Fang Shao 1. Auflage Trans Tech Publications 2015 Verlag C.H. Beck im Internet: ISBN schnell und portofrei erhältlich bei beck-shop.de DIE FACHBUCHHANDLUNG

2 Table of Contents Preface and Conference Committees Chapter 1: Applied Mechanics and Dynamics, Mechanical Engineering, Manufacturing Numerical Analysis of the Influence of Export Structure on Jet Fan Aerodynamics Performances Y.S. Wang and D.L. Pan 3 Reliability Analysis of CNC Machine Tools Based on Fuzzy Theory L. Tao 7 Research about the Layout of Canted Deck Based on Support Vector Machine J.J. Yuan, Z. Meng and Q.M. Liao 11 Air Compressor Piston Finite Element Analysis Based on ANSYS X.X. Zhou, T.S. Cong, X.L. Lei and F.Z. Yang 15 Stress Analysis of Air Compressor Crankshaft Based on ANSYS X.X. Zhou, F.Z. Yang, X.L. Lei and T.S. Cong 18 Dynamic Characteristics Analysis of Large-Span Cable-Stayed Bridge X.X. Shi 22 Theoretical Model of Suspended Floor under the Seismic Effect Y.X. Zhang, W.J. Zhang and J.R. Zhu 26 Damping Effect of Suspended Floor in Huge Frame Constructions W.J. Zhang, Y.X. Zhang and X. Chen 30 A Study on the Inner Surface Pressure Distribution of Fluid in Ninety Degree Elbow Pipe X.Y. Lu, H.L. Zhu, X.L. Lu, J.M. Liu, Y. Zhou and X.G. Li 34 Numerical Simulation of Flow Fluid in Elbow Pipe Based on FLUENT and the Establishment of the Pressure Model X.Y. Lu, X.G. Li, J.M. Liu, X.L. Lu, H.L. Zhu and Y. Zhou 39 Optimization of CNC Lathe-Bed Structure Based on Ansys H.W. Shan 43 The Effect of Orifice Plate on Flow Field and Thermal Environment in Oven Box H. Li, Z.J. Zou and F. Wang 47 Progress on Denitration and Desulfuration Technologies for Marine Diesel Engines Y.Q. Liu, J.Z. Du, P.Q. Tan and A.M. Du 51 Collapsing Strength Analysis of Bending Part Casing in Horizontal Wells under Three- Point Bending J.D. Wang, Y.H. Dou, Y.P. Cao and H.B. Ren 57 Analysis on Gear Cracking in Bucket Wheel Stacker Reclaimer X.X. Bian 61 Analysis Fracture Failure Analysis of Drill Pipe s Tool Joint F.P. Li 65 The Multi-Station Clamp Device of the Long Truss Girder End Parts Processing D.Y. Sun and E.G. Shang 69 Heat Transfer Analysis of Silicone Oil Fan Clutch Based on Finite Element Simulation L. Li, X.N. Liu and X.L. Feng 73 Vibration Characteristics for Planetary Geared Systems with Plastic Gears J.Y. Li, Q.C. Hu and F.H. Duan 77 Analysis of Electrostatic Suspension Kinematic Characteristics of Hollow Be Rotor X.W. Cheng and N. Shi 85 Experimental Investigations on the Grinding Temperature of the Superhard Grinding Wheel with Ordering Abrasive Pattern L. Xiang, Y.S. Lu, J. Wang, Z.Z. Liu, S. Zhang and F. Ma 90

3 Three Dimensional Model Construction and Strength Finite Element Analysis of Cold Shearing Machine Crankshaft A.H. Li and H.Y. Liu 95 Study on the Hamilton Dynamical System of Wheel-and-Rail Dynamical Model of High- Speed Train H.Y. Shen, J.H. Du and Y.L. Wang 99 The Anti-Vibration Design of the Ball Grid Array Solder Joint F. You, Y.G. Huang and B. Li 103 The Analysis of Security Wedge Lock-Rope Mechanism by ANSYS Finite Element Analysis K.B. Fu and F. Peng 107 Probabilistic Safety Pin Coupling Failure Analysis to Explore S.J. Wang 114 Key Technology of Hydraulic System Design of Large-Scale Blow Molding Machine Y.W. Chen 118 Research on the Tire Rope Lift-Off Process L.J. Qiu and S.Y. Xu 122 Fatigue Life Assessment of Steel Structures of a Metallurgy Crane B. Xu, X.Y. Tang, Y. Jiang and W. Gong 126 Research on the Dynamic Characteristics of the Frame System of Material Wagon Y. Xie 130 Research on the Variety Law of Time-Dependent Reliability Model of Picking Link Rod in Sewing Machine F. Zhao, Y.J. Gong, H.B. Xin, H.Y. Xiang, C.L. Meng and Y. Zhang 135 Bridge Crane Random Stress Spectrum Processed and Fatigue Life Analysis A.H. Wang, Y.Q. Liu and Y.S. Gao 139 Modeling and Simulation Research of Time-Dependent Reliability Model of Link Rod in Needle Bar Mechanism Y.J. Gong, F. Zhao, H.B. Xin, H.Y. Xiang, C.L. Meng and Y. Zhang 143 Rapid Prototyping Technology in the Three Dimensional Model of Hierarchical Processing X.P. Li, Q.S. Wang and W. Sun 147 Smoothly Blending of Cylinders Whose Axes are Non-Coplanar Based on Smoothly Blended Axes G.Z. Bai, H. Wang, W. Zhi, Z.J. Yin and S.Y. Liu 152 Analysis of Commercial Vehicle Thrust Rod Load Simulation G.Y. Feng, W.K. Shi, J. Ke and L.L. Guo 159 Calculating the Torques and Meter Factor of Turbine Flow Meter with Numerical Simulation Y.Z. Huang, Y.T. Sun, B.S. Zhang, G. Chen and B.L. Zhu 164 Approximate Calculation of the Fundamental Frequency for Beam System Structures Y.J. Chen 169 Experimental Study of Elastohydrodynamic Lubrication under Heavy Loaded and Variable Velocity Conditions N.M. Miao 173 Valve-Shut off Scheme and Affected Zone Analysis of Multi-Sources Looped-Pipe Network Based on ARCGIS F. Wei 178 Research and Development of Overloading Velocity Jump Line Contact Elastohydrodynamic Lubrication Testbed N.M. Miao 182 The Optimization of Directly Buried Heating Pipe Elbow Based on the ANSYS Y.X. Wang, F. Wang, G.W. Wang and Y.G. Lei 187 Research on Returning Reference Point of CNC Machine with FANUC-31I J. Liu and L.X. Lai 191 Wind Turbine Gearbox Fault Diagnosis Based on Improved HHT Z.J. Dai, Y.F. Xu, X.J. Mei and Q.Q. Su 195 CAE Analysis on the Precision Forging of Big Semimonocoque of Vehicle Axle J.L. Li, X.X. Wang, R. He and X.X. Qian 200

4 b Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Accounting for Climate and Typology of Reuse of Offshore Structures with a Change of Function I.V. Dunichkin and P.K. Kalashnikov 205 Optimization of Tensile Residual Stress on Machined Surface in MQL Turning X. Ji, A.H. Shih, M. Rajora, Y.M. Shao and S.Y. Liang 209 Dynamic Simulation Analysis on Slider-Crank Mechanism of the Mechatronics Fitness and Entertainment Machine Based on ADAMS Y. Tian, M. Liu and X.X. Xu 213 Evaluating the Effect of PCD End Mill s Nose Radius on Machinability of Titanium Alloy Ti-6Al-4V in High Speed Milling S. Ali Abbasi and P.F. Feng 217 Study on Interaction Theory of Thermal Distortion Friction Pairs and Effect on Friction Coefficient J. Li, X.Y. Wang and Z.Y. Wang 223 Experiment on Damping Effects of Damping Ditch in Complex Environment L. Fan, X. Fang, J.M. Pan, M.J. Fu, L.T. Zhang and Z.R. Gao 228 Research on Thermal Effect Caused by Absorbing Inclusion in Dielectric Irradiated by Pulse Laser C.H. Huang, X.H. Sun, Y.H. Sun and J. Zou 231 Dynamic Simulation of FCCU under Abnormal Condition W.D. Tian, S.J. Mu, M.M. Jin, C.L. Wang and C.K. Li 235 Effect of Spark Timing on Performance of a Hydrogen Gasoline Engine W.B. Shi, X.M. Yu and P. Sun 239 Performance and Emissions of a Hydrogen-Gasoline SI Engine W.B. Shi, X.M. Yu and P. Sun 243 Calculation and Analysis of the Turbocharger Assembly Errors S.Y. Xu 247 The Multi-Factor Durability Evaluation Model of the FRP Applied to the Structure Based on Environmental Differences Y.X. Yang, Y.H. Zhang, Q.R. Yue, B. Li and P.F. Chen 251 The Innovative Product Design with Combining Engineering Science and "UCD" S.G. Wang, Z.X. Liu and X.S. Gao 255 Numerical Analysis of Hot Stamping Mold Cooling System Based on FLUENT L.J. Yan 259 A Virtual Environment for Simulation of Formation Flight Z.D. Xu, T. Shang, R.M. Sun and D.M. Wang 263 Calculation Model of Torpedo Ladle Number B.F. Huang, X.L. Zhou, G.F. Zhang and Z. Shi 267 Design Assistant Decision Model for Parafoil Precise Airdrop W. Feng, J.F. Zhao and S.Y. Ma 274 Modeling and Simulation for Trajectory of TV-Guided Projectile M. Hou, Q. Han, H.C. Wang and S.M. Bi 278 Research on Correction for Errors of TV-Guided Projectile Caused by Ballistic Vertical Wind M. Hou, H.X. Wang, J.W. Wang and X.Z. Fu 283 Research on Operating Speed Based on Driver and Vehicle Response X.R. Hu and J. Xiong 287 Reverse Design of the Card Buckle Based on Imageware S.G. Wang, F.S. Meng and Y. Han 291 Equivalent Stress Cycles Based on District Heating Operation Y.Y. Dong, F. Wang, Y.G. Lei and G.W. Wang 295 Energy Management for the Automotive Paint Workshop Q.L. Zhang 300 Analysis of the Ventilation Effects on Radon-222 Exhalation in a Dead-End Tunnel S.G. Wang, W. Yang, Q. Chen, J.H. Chen and C. Han 304 Gas Concentration Distribution Law in the Roadway after Coal and Gas Outburst C.L. Yang, Y.L. Zhao, X.C. Li, Y.Y. Meng and F.F. Zhu 314

5 Applied Mechanics and Materials Vols c The Study about Breakdown between the Electrodes Gap Law in WEDM D. Wang 319 Numerical Analysis of Cone-Jet Based on EHD Micro-Jet Technology S.S. Wang, Z.N. Tang, B.Y. Miao and J.X. Chen 323 Experimental Research of HCCI Combustion Based on Late Exhaust Duct EGR Strategy Y.H. Gao, Y.C. Jiang, P. Cheng, J.C. Chi and Y.K. Wang 327 Chapter 2: Measurement and Instrumentation, Monitoring, Testing and Detection Technologies Transformer Region Customer Information Detection System Z.P. Wu, J.J. Yang, Z.B. Lou, J.M. Yao and R.S. Fan 333 Underwater Target Detection Based on Electric-Field Sensor Line Array X.J. Wang, D.H. Liu, W.B. Zhu and D. Ji 337 Investigation on Z-Scan and its Application of Nonlinear Measurement Z.S. Feng, X.M. Li, X.Y. Jing, Z.H. Lan and C.D. Ning 343 The PCB Surface Defect Detection System Based on GPU Acceleration Y. Liu and S.Z. Li 347 The Application and Study of CLIPS in Fault Diagnosis of Self-Propelled Gun Servo System C.H. Gong, L.H. Huang and L. Peng 353 Application of Single Chip Microcomputer Technology in the Measurement of the Motion of the Rod Body J.H. Jiang and X.W. Wang 358 The Study of Relationship between Multivariate Capability Indices and Sampling Number Q.Y. An and S.X. Wang 362 A Study on Liquid Level Measurement and Control System Based on Single Chip Microcomputer J.H. Jiang and Z.G. Xiao 369 The Comparison of Segmentation Results for High-Resolution Remote Sensing Image between ecognition and EDISON X. Liu, J.W. Xu, J.F. Zhao, L. Yong and Z. Xin 373 Research on the Inspection and Mark on the Defects of Printed Matter Based on Template Matching Algorithm S.Y. Xing, Y.Q. Liu and Y.S. Zheng 377 Linearization of High Precision Human Body Temperature Measurement Circuit Based on NTC Thermistor D.J. Li and C.G. Xing 381 Research of Integrated Valve Plate Differential Pressure Leak Measuring Device M.Q. Zhang, K.C. Miao and G. Xu 385 The Method Study of Laser Alignment Applied to Complete Zero-Line Detection of Artillery W. Tang, L.Q. Wang, H.Z. Yu and X.P. Liu 389 An Optical-Triangulation-Based Method for Measurement of Blade Sections Y. Zhu, J.L. Liu, C.W. Li and Z.Y. Kang 395 Hair Detection in Mushroom Based on Image Processing Z.S. Deng and T.Q. Li 402 Study on Fast Calibration Model for Beam s Space Position of Point-Structured Optical Probe J.L. Liu, Y. Zhu, Z.Y. Kang and L. Wang 406 A Collision Detection Algorithm in Virtual Assembly Technology H.Q. Qiang and C.H. Qian 411 An Edge Detection Method Based on Adaptive Differential Operator R.F. Gong and M.X. Chu 415 Object Tracking System Based on Artificial Vision Algorithms M. Mauledoux, C. Hernandez, C. Segura and O.F. Aviles 420 Deformation Measurement and Pointing Model Analysis of 25m Antenna K.Y. Hu, A.L. Yusup and Q. Xu 424

6 d Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Research on Electronic Coin Recognition System Based on STC89C52 T. Wang and H. Wang 432 Comparative Analysis of Point to Point and Cascade Line Monitoring System X.L. Wu, M. Zhao, Y.C. Zhang and P. Jin 437 Intelligent Sensing System for Distribution Line Condition Monitoring K. Bi, J.B. Huang, Z.W. Liu and P. Jin 441 Study on Wavelet Packet Denoising Technique and its Application in Mechanical Fault Diagnosis Q.J. Xiao, Z.H. Luo and J.L. Wu 445 The Application of Finite Element Simulation on Sheet Plate Modal Acoustic Emission Testing H. Du and Y. Liu 449 Design of Remote Fault Diagnosis System for Automobile Engine Based on Internet C.S. Si 456 Design on Intelligent Video Surveillance System Based on Target Identification Algorithm Z.J. Meng and C. Jie 460 Model Based Protocol Conformance Test Study G.L. Deng, T. He, Y. Wei, H.Z. Li, S.X. Xu and D.F. Zhang 466 Application Research of Intelligent Monitoring System Based on Abnormal Events S.M. Wu, J.W. Song and X.N. Liu 471 The Modulation Index Optimization of Microwave Photonic Frequency Conversion Using Double-Sideband Suppressed-Carrier and Balance Detection W. Jiang, Q.G. Tan, D. Liang, X.J. Li and Z.B. Zhu 475 Effect Evaluation of Video Surveillance System on the Basis of Principal Component Analysis T. Zhu and W.J. Hong 479 Research on Monitoring System of Water Supply Pipe Network Based on GPRS Technology Y.J. Lin and Y. Zhao 482 Realization of an Execution System of Distributed Performance Testing Based on TTCN-3 S.M. Liu, X.M. Liu and Y.P. Liu 486 Based on Wireless Sensor Network (NWK) of Non-Contact Tremor Monitoring Equipment Improvement for Parkinson's Disease D.L. Sha, W.C. Xie, X.L. Fan and Y. Li 491 Ultra Surf Flow Detection Based on Statistical Classification X.Y. Ren and H.Q. Hu 495 Comparison and Analysis on Environmental Function Matrix Computing in Separation of Guidance Instrument Systematic Errors X.W. Dai and Y.Z. Xie 500 Ionosphere Delay Correction by Using Multifrequency Measuring Data Y.L. Wu and W.W. Yi 504 The Research of Embedded Remote Monitoring System Based on B/S Framework G.Q. Dang and X.Y. Cheng 508 In-Depth Research Information Differential Method of Measurement S.J. Wang, F. Dong and W.H. Luo 512 Research on the Carrier Aggregation Application in the Blind Detection of PDCCH Z. Li, X.W. Li and L. Xu 518 Obtain the Solar Direction by the Skylight Polarization Degree Measurement L. Li, J. Zhou and H. Huang 522 Mechanical Seal End Faces Friction Condition Monitoring Based on Particle Filter J.K. Zhang, E.Q. Zhang, Z.D. Ge and P. Fu 526 The Research and Design of Monitoring System for Submarine Cables Y.J. Wang, X.M. Fan, F. Yuan and H.B. Hao 534 Fault Diagnosis of New Certain Mine Sweeping Plough s Electrical Control System Based on Data Fusion Y. Zhao, X.Q. Yang, Y.H. Xu and J.B. Li 539 An Indoor Multi-Function Environment Detector Model H. Luo, N.J. Jin, X.Y. Ye, J.C. Li and L. Gao 544

7 Applied Mechanics and Materials Vols e Monitoring of Campylobacter jejuni Contamination in Different Links of Broiler Production Chain in Qingdao H.H. Zhai, W.S. Chang, J.W. Wang and J. Wang 548 An Efficient Two-Dimension BIST Compression Approach Z.L. Wang, T. Ji, M.S. Zheng, J.Y. Wang and L.J. Li 552 An Active Search and Rescue Device in Ruin Interstice: SnakeRescuer Z. Zhang, S. Mei, Y.F. Cao, Y.A. Zhang and H. Shang 558 A Multisection Snake Like Manipulator with Rear Actuators: SnakeHelper Z. Zhang, Y.F. Cao, Y.A. Zhang and H. Shang 563 Design of Underwater Acoustic Vector Sensor and its Elastic Suspension Element S. Liu, Y. Lan and Q. Li 569 Aircraft Fuel Tank CATIA Model Pretreatment Method for Quality Property Calculation Y.Q. Chen, S.M. Su, J.P. Chen and W. Chang 573 Directional Search for Spiral Trajectory Extraction X.F. Shao and H. Chen 577 Foot Pressure Intelligent Analysis System M.C. Wang, L.N. Zheng, H.D. Yang and T.J. Pan 581 The Application of Performance Degradation Analysis in Machine Tool Spindle W. Hu, K. Zeng, X.C. He, G.W. Cui, S.W. Yuan and E. Liu 585 Early Cancer Locating Method Based on Infrared Functional Imaging L.J. Shao, Z.M. Zhang, J.Y. Yang, H.M. Leng, W.J. Chen and Z. Wei 589 Finite Element Analysis of Circular Piezoelectric Resonator with Box Fixation X.W. Liu and C.Y. Liu 594 Research of Isokinetic Test on the Strength of Shoulder Joint of Elite Female Water Polo Athletes X.Y. Wang 598 Research on the Numerical Simulation of Internal Flow Field and Energy Efficiency of Ventilator Z.J. Tong, X.L. Wang, K. Zhang and S.X. Wu 602 Application of the Laser Alloy Cladding on Re-Manufacturing of the Machine Tool Axis Y.L. Zhang, B.F. He and J. Dai 606 Automobile Electrostatic Precipitator H.P. Mo, L.N. Gao and B. Xu 611 Method of Effectiveness Analysis and Use of CT Image S.J. Lian and J.H. Zhou 615 Proposing a Hybrid Index that Combines between Meteorological and Topographic Parameters to Predict Forest Fires A. Karouni, B. Daya and P. Chauvet 621 Research on Knowledge Change Rate-Based Attribute Importance Measure Method F.C. Li and Q.H. Hu 628 Manufacturing Process of Terahertz Radar Reflector Based on Ultra-Precision Machining Technology D. Li, S.B. Luo, J.M. Zhang, C.Y. Xu and C.T. Pang 633 Design and Research of Intelligent Warehouse Monitoring System of Multimedia Sensor Network Y. Zhang 637 A Planar Capacitive Sensor Parameter Design for Security Detection X.D. Yang, Y. Gong, N. Li and P. Wang 642 Research on Blasting Vibration Signal Denoising Based on Lifting Scheme Q.M. Xie, H.Z. Zhang, Y. Gao, H.A. Cao, S.Q. Guo, M.S. Zhong and H.Q. Liu 647 Parameter Estimation and Cramer-Rao Bound in Wideband Bistatic MIMO Radar System L. Li 651 The Research of Wearable Electronic Medical Devices X.L. Liu, J.F. Xu and H.T. Wang 656 Research on the Realization of the Maximum Benefit of Thermal Power J.M. Chen 660 Research on Ocean Wave Spectra Predicting Based on X-Band Radar System B.W. Shi and Z.J. Liu 664

8 f Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Application of Wind Profiler Radar in Guided Missile Range Experiment Q. Yang, Y.K. Wu and Z. Yang 668 Maneuvering Target Tracking Based on Radar/ESM Sensors X.X. Li and P.L. Wu 672 Study on Capacitance Proximity Fuze Burst Height Dispersion J. Yu, J.Y. Zeng and J.L. Zhong 676 Research on Model of Airborne Radar Reconnaissance for Joint Campaign Level Wargame Based on EBI D.Y. Wu, S.J. Liu and Y. Wang 680 Modeling the Near Infrared Light Propagation in Biological Tissues Y.X. Wu, M.F. Huang, T. Song and G.D. Xu 686 Imaging Characteristics Analysis of GLV-Based Thermal CTP System B.Y. Miao, Z.N. Tang, S.S. Wang and J.X. Chen 690 Research of Image Information Extraction Method Based on Structured Light X. Bai, Y.Z. Yang, J.W. Sheng, L. Qi, H.H. Ma and M.S. Zhang 694 Comparative Study of ECG Based Identification G. Zheng, Y.R. Wang, Q. Qin, Y. Li and Z.Y. Li 700 Character Analysis and Application of Resistance Sensor on Sizing Machine Y. Tong 704 Chapter 3: Mechatronics, Robotics, Automation and Control Design of a Laser Navigation System for Substation Inspection Robot Based on Map Matching P. Xiao, L.X. Yu, S.H. Chen, H.P. Wang and B.H. Wang 711 Research on a Current Electric Bus Battery Swapping System Based on the Cartesian Coordinate Robot X. Wang, J. Wang and Y. Zhang 715 A Study of Beer Fermentation Control System Based on the Technology of Computer Control J.H. Jiang and Q.Z. Zhuang 719 A Study on Speed Control System Based on STC89C51 J.H. Jiang and M.H. Liu 723 A UAV Longitudinal Control System Design Based on QFT C. Yong, J.Y. Yu, C.P. Zhang and H.W. Ma 726 Research of ADRC in Application to the Servo System of Self-Propelled Gun P. Lei, X.B. Liao, L.H. Huang and C.H. Gong 730 Simulation of Fuzzy PID Control for a Large Containership Speed at Slow Steaming Condition C. Guan, H. Chen and H.B. Gao 734 Fuzzy Tuning PID Control of the Rolling Mill Main Drive System L.P. Fan and Y. Liu 739 Analysis and Evaluation of Non-Singularity Workspace of Parallel Manipulator Y.J. Liu, T. Fu, H.S. Ding and Y.M. Wang 743 The Implementation of Skyhook Control for Semi-Active Suspension Based on Vi- CarRealTime B.W. Bi and F. Xiao 748 Design and Simulation of the Hydraulic Synchronous Control System of the Upper Roller in Bending Machine Y. Cao, K.W. Qiu, G.Q. Wu, R.C. Yu and C.C. Zhong 752 Research on Flux Damping Control Strategy of DFIG during Grid Voltage Dips X.G. Zhang and Z. Xie 756 The Reliability Analysis of Mechanical Leg (2UPS+UP) Based on a Discrete Time Repairable Markov Model J.L. Zhang, Z.L. Jin and D.M. Zhao 760 Research of Control System of the Large-Scale Blow Molding Machine L. Qiu 764

9 Applied Mechanics and Materials Vols g PID+CMAC Neural Network Control of Micro Positioning Platform X.J. Yang and Y. Li 768 Simulation of Motion Control for a Modular Robot of Five Degrees of Freedom R.A. Castillo Estepa, O.G. Rubiano Montaña and C.A. Hurtado Erasso 773 A Hybrid Differential Flatness and Sliding Modes Controller for Dynamical Structural Testing on Lower Limp Prostheses M. Mauledoux, O.I. Caldas, O.F. Avilés, E. Mejía-Ruda and S. Jiménez 777 Design and Implementation of Mechatronic Prosthesis for Amputees with Trans-Humeral Amputation M. Mauledoux, J. Hernández, O.I. Caldas, O.F. Avilés and H.F. Ramirez 781 Mechanical Design of a Self-Balancing Platform for Transporting Purposes M. Mauledoux, J.S. Cely and O.F. Avilés 785 Research on the Stiffness Modeling of the High Precision Positioning Platform under the Thermal Model J. Li, J.Z. Liu, W.W. Zhang, L.G. Chen, M.Q. Pan, T. Chen, Y.J. Wang and L.N. Sun 789 Evaluation of Dynamic Load-Carrying Capacity for Free-Floating Space Manipulators Y. Liu, Q.X. Jia, G. Chen, H.X. Sun and J.J. Peng 795 Multi-Objective Trajectory Optimization of Free-Floating Space Manipulator Using NSGA- II G. Chen, C. Wei, Q.X. Jia, H.X. Sun and B.Y. Yu 800 Introduce a Negative Pressure Wall-Climbing Robot with the ARM System D. Teng, F.X. Li, X.S. Gao and W. Guan 805 High Precision Synchronous Mechanical Motion Hydraulic Compensation Method H.J. Liu and S.Y. Zhi 810 The Design and Simulation of AC Asynchronous Motor Direct Torque Control System L.P. Zhang, X.G. Xin, W.Y. Wang and H.F. Wu 814 The Automatic Gain Control of the Digital Reconnaissance Receiver H.Q. Jiang, G.L. Zou and Y. Liu 820 Research on Architecture for Multi-UAV Systems Based on Autonomous Cooperation P.F. Peng, L. Gong and Q. Yu 825 Electro-Hydraulic Servo Loading System for the Pumping Unit L.P. Xu and S. Yao 829 Adaptive Cruise Control System: Comparing LQ and MP Controllers D. Liu and J. Xiong 833 Workspace Analyzing for Hybrid Serial-Parallel Mechanism of a New Bionic Quadruped Robot M.J. Song, C.J. Ding and C.J. Yu 837 The Design of Indoor Intelligent Lighting Control System M. Jiao 841 The Design of Seeding Machine Based on the Motion Controller D.H. Zhang and X.Q. Wu 845 Fuzzy PID Parameters Self-Tuning in the Application of the Furnace Temperature Control System Z.Q. Guan, X.M. Luo and L.P. Song 849 Fuzzy Self-Tuning PID Temperature Control Modeling and Simulation System Z.Q. Guan, X.M. Luo and L.P. Song 854 Research on Devices of Fault Setting and Eliminating for CNC Machine P. Zhang and W. Zuo 859 Study on Electrical Control System of X62W Milling Machine Based on PLC G.Y. Yang, S.P. Deng and Y.M. Qi 863 Velocity Optimal Control Algorithm Based on Hbrid Machine Tool X. Gu, L.N. Li and H.C. Sun 867 Modeling and Simulation of Kollmorgen Motor Movement Control System Based on SimScape J. Sun, B.B. Qian, X.J. Qin and Y. Huang 872 The Path Planning Control of a Mobile Robot Based on Fuzzy and Fuzzy Adaptive PID S.Y. Zhang, Y.K. Shen and W.S. Cui 876

10 h Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Design and Fabrication of a Mobile Self-Reconfigurable Microrobot with Wall-Climbing Ability D.W. Zhang, X.C. Zhao, J.C. Deng, Z.B. Li and J.P. Chen 881 Research on Control System of Large Capacity of Hollow Blow Molding Machine J. Huang, W.M. Li and G.L. Lu 885 Research on Strategy Intelligent Control of Traffic Signal Y.M. Zhang, H.B. Luo and J.Q. Wang 889 Diesel Engine Running at Constant Speed Base on Fuzzy Control Strategy F. Wu 893 Design of a Temperature Control System Based on Generalized Predictive Control Y.F. Peng, C. Shu, X.L. Tan and Z.C. Shao 897 Autonomous Car for Mining 1 ProtoType ACM1PT M. Mauledoux, J. Hernández, O.F. Avilés and H.F. Ramirez 901 Study on Control Model of Air-Conditioning System of Air-Conditioned Train in Qinghai- Tibet Railway Y.N. Li and Y. Wang 905 Applied of RBF Neural Network in Pressure and Flow Control System F. Wang, X.H. Sun, Z.J. Zou and H. Li 909 Real-Time Traffic Signal Control Based on Kalman Filtering Theory Y.X. Xu, W.Y. Yang and W. Shi 915 Grasping Optimization in a Three Fingers Final Effector M. Mauledoux, V. Prada and O.F. Avilés 919 Chapter 4: Electronics and Microelectronics, Embedded and Integrated Systems, Communications, Power and Energy, Electric and Magnetic Systems Research on Underwater Static Electric Field for Warship Based on Hybrid Model Q. Bian, D.H. Liu and X.J. Wang 925 Research on Micro-Grid Operation Control Strategy Y.A. Chen, L.S. Wang and J.H. Zhou 930 Research on Intelligent Campus System Construction Based on RFID J.L. Chen, H. Chen and T.F. Lei 934 Design and Thermal Analysis of SiGe HBT with Non-Uniform Segmented Emitter Fingers and Non-Uniform Emitter Finger Spacing L. Chen 938 Design of a 10 Bit 2GHz Digital to Analog Converter Circuit Y.J. Yang, W. Hu, J. Liu, Z. Yu, D.B. Fu and G.B. Chen 942 Distribution Automation Oriented Research on the Adaptability of the Communication Network Technologies C.F. Xu, B. Bo and Y. He 946 A Wavelet Based Directional Algorithm for UHVDC Line Protection Y.J. Li, J.C. Tan and S.X. Zhang 950 Comparison of Resource Scheduling Algorithms for LTE-Based Smart Grid Communications C.F. Xu, F.B. Tao and Y. He 954 The Identification Algorithm of Power System s Bad Data Based on Improved K-Means B.Y. Wang, L. Zhu and S.M. Zhang 958 Comparison of Downlink Channel Estimation Schemes for LTE-Based Smart Grid Communications H.J. Wang, Y. Zhen, Q.H. Ou, H.Y. Zhang, W.Q. Yang and Y.D. Xia 962 Design of the Independent Rescue System Based on the Passive Sound Source Localization and Machine Vision S. Dong, A.G. Zhao, L.Y. Xing, F. Wang, F.L. Song and L.X. Hao 966 The Design of Signal Generator Based on FPGA High Resolution C.Y. He, B.Q. Liu, M.Z. Liu and X.B. Mao 970

11 Applied Mechanics and Materials Vols i Study on AC Artificially Pollution Flashover Performance of Long Porcelain Insulator String Y. Shi, G. Hu and Y. Chen 975 The Embedded Video System Based on N32926 with RT-Thread Z.Y. Shi, B.B. Ding, J.F. Lin and C. Feng 979 Real-Time Precise IOT Positioning System Based on Chirp Spread Spectrum Technology for Transportation W. Wang, S. Hou, M.L. Lu and S. Liu 983 Design of Intelligent Wagon which Can Automatically Enter into Garage Based on STC89C52 T. Wang 987 Study on Personnel Positioning System of Ship Based on Zigbee Technology J.K. Mao and F. Zhan 992 Experimental Analysis of the Interaction Effect between Wave Power Platform Buoys of "Haiyuan 1" in Real Sea Conditions Q. Lyu, D.T. Li, Z.S. Chen, D.T. Li, W.T. Tang and W.N. Cao 997 Optimal Strategy of the Electricity Sale Distribution for Deterministic Generation in Long- Term and Real-Time Markets Based on Risk Factors J.Q. Li, M.J. Xie and Y.S. Zhang 1003 Development on Seismic Sensor System with MEMS Technology for Elevator s Seismic Condition Z.Q. Luo, S.L. Huang and J.R. Wan 1009 Coding and Decoding Device Design of Three-Value Quantum Computer H.Y. Liu 1015 PR Control of a Three-Phase Grid-Connected Inverter under Unbalanced Grid Voltages Condition K. Liu and Z. Xie 1019 High-Voltage Large-Current 4H-SiC JBS Diodes Y.H. Tao, S. Bai, R.H. Huang, G. Chen, L. Wang, A. Liu, Y. Li and Z.F. Zhao 1023 Steady-State Operation Analysis for a Three-Winding Single-Phase Capacitor Motor J.H. Zeng and J.G. Deng 1027 Design of DDS Based on FPGA Technology W. Jiang, F. Yuan and L.Q. Yang 1031 Fabrication and High Temperature Characterization of 1200V-15A 4H-SIC JBS Diode A. Liu, Y.H. Tao, S. Bai, G. Chen, L. Wang, R.H. Huang, Y. Li and Z.F. Zhao 1034 Research on the Package of High Voltage SiC JBS G. Chen, Y.N. Li, L. Wang, A. Liu, S. Bai, D.H. Li and Q.M. Zhang 1038 High-Speed Low-Power Bulk-Controlled Sense-Amplifier D Flip-Flop X.Y. Deng, Y.Y. Mo and J.H. Ning 1042 Design of an Ultra-Wideband Wilkinson Power Divider in Modern Electronic Engineering X. Cao and Z.X. Tang 1048 RTDS-Based Modeling and Simulation for Control System of HVDC M.S. Liu, L.J. Qian and Z.Y. Sun 1052 AGV Magnetic Sensor Data Acquisition System W.X. Wang 1056 Forest Fire Prevention Video Data Transmission System Design Based on Wireless Mesh Network L.Q. Yang 1061 Application of Coded Modulation for Physical-Layer Network Coding Q.S. Yuan, Y.J. Hu, C.L. Wang and Z.M. Yang 1068 Design of 1.15MWp Distributed Photovoltaic Power Generation Scheme J.Y. Sui, K. Bi, Z.W. Liu and P. Jin 1073 Research and Analysis of Business Systems for County Grid J. Dong, X. Wan, W.Y. Zhou and P. Jin 1077 Suppression of High-Frequency Interference in Signal Loop G.Q. Zhao, Z.Z. Wang, B. Dong, L.L. Zhao and K. Wang 1081 Research of Electric Energy-Saving Evaluation Analysis in Colleges and Universities P.D. Du, Y.J. Han and F.C. Liu 1086

12 j Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Distributed Cooperative Spectrum Sensing Algorithm Based on Average Consensus Y.X. Feng, A.Q. Bao and D.Y. Zhang 1090 Hardware Implementation Optimization of Extended Kalman Filter for the Estimation of State of Charge of Li-Ion Battery H.C. Zhang, P.S. Wang, J. Jiang and H.F. Cao 1094 Hoeffding Evolutionary Algorithm and its Application in Building Equivalent Circuit Models for Lithium-Ion Battery J.J. Wu, J. Huang, H.L. Li and W.L. Kang 1099 Research on Overlapped Time Division Multiplexing in the Amplify-and-Forward Cooperative Mode H. Zhang and W.P. Ma 1103 A Wind Power Prediction Method Based on RBF Neural Network Y.R. Wang 1107 Impact of Large-Scale Wind Power Penetration on the Static Voltage Stability Based on the L Index R.H. Liu, A.C. Xue, M.K. Li and C.R. Li 1111 Study of Resource Allocation Method of Communication Network in Dense Crowded Area J.J. Tan, N. Pan and K. Wang 1115 Application of RFID in the Intelligent Traffic System Z.B. Li 1119 Performance Analysis of GPS/BDS Precise Point Positioning X.Y. Li, J. Wang and Y.T. Liu 1123 Reliability Oriented Selective Triple Modular Redundancy for SRAM-Based FPGAs M.S. Zheng, Z.L. Wang, J. Tu, J.Y. Wang and L.J. Li 1127 The Research about Interference Location Based on Different Times of TDOA with Two Satellites F. Feng, Y.S. Zhang, B. Ou and G. Chen 1132 Coverage-Optimized Deployment Research for Maximizing the Sensor Network Coverage X.L. Zeng 1137 The Performance of Double-Binary Turbo Codes in the HAP-Based Communication System J.Y. Zheng, L. Li and Y.S. Zhu 1141 Study on Absorption and Utilization Technology of Renewable Electric Energy Y.J. Liu and N. Shi 1145 Research on MUSIC Algorithm Based on Single-Antenna G. Cui, S.Y. Su and Z.P. Chen 1151 Rapid Transfer Alignment Using Integrated Navigation System as Reference W. Sheng, X. Han and D.S. Sun 1156 The Power Delay Profile of the Single Antenna Full-Duplex Self-Interference Channel in Indoor Environments at 2.4 GHz X.Y. Wu, Y. Shen, Y.X. Tang and S.C. Xiao 1166 The Research of Assembling Computer Based on Augmented Reality J. Jiang and Y. Kuang 1171 A VLC Based Vehicle Collision Avoidance Scheme for Intelligent Transport Systems L.X. Li, Y. Deng, Y. Chen and J.H. Shen 1175 Study of Optimization of Microwave Cavity Filter Parameters Based on a Hybrid Algorithm of Trust Region S.E. Zhang, X. Wang and K. Wang 1180 Generation of Frequency 12-Tupling Millimeter-Wave Using one DPMZM to Overcome Chromatic Dispersion D. Liang, Q.G. Tan, W. Jiang, X.J. Li and Z.B. Zhu 1184 Symbol Timing Sequence Structure for OFDM-CDMA Communication System under Low SNR Z.Y. Zhang, F.C. Tian, F.X. Zeng, L.J. Ge and G.X. Xuan 1188 Coal Mine Voltage Fluctuation Analysis and Control Strategy X.X. Meng, L.Y. Zhao and Q.Z. Zhang 1193 Airborne Embedded Training System Architecture Design Y. Wu, B. Li, X.B. Wang and H.Y. Zhao 1198

13 Applied Mechanics and Materials Vols k A Modeling Method and I-V Characteristics for PV Array X.Y. Wei, B. Guo, D.Y. Li and G. Yang 1202 Resource Allocation Scheme for Device-to-Device Communications Underlaying Cellular Networks to Maximize Overall Throughput S.H. Kou, J. Sun and S.X. Shao 1208 A Distributed Interference Alignment Algorithm for Device-to-Device Communications with Multiple Antennas Underlaying Cellular Networks N.F. Li, S.X. Shao and J. Sun 1216 Reconditioning Equalizer Filter for Non-Constant Envelop Signals X.F. Li and L.J. Wang 1222 The Ship Strong Electromagnetic Environment and its Improvement H.C. Xia and Z. Teng 1226 Application of Four Quadrant Inverter for Mine Hoister R. Chen, Y.B. Chen and J.X. Chen 1230 A Study of the Structure Optimization of Silicon-Based Solar Cells Y. Xu and X.Y. Li 1234 DOA Estimation for Uniform Linear Array with Compressive Sensing Y. Zhang, G.Y. Xin and X.F. Zhang 1239 Optimization Model of the Cross Intersection Signal Timing Based on the Simulation L. Wang, L.Y. Wei and Y. Zhou 1244 Analysis on Estimation of PM2.5 Emissions on Coal-Fired Generating Unit X.Z. Han and Q.Q. Wang 1248 Study on Bus Assignment Algorithm for SOC Test X.M. Li and S.H. Huang 1252 Bisection Subspace Pursuit Algorithm for Compressive Sensing L. Zhou, K.L. Zhang, D.M. Li, F. Wang, X.J. Li and S.F. Liang 1256 Design of a Pulse Oximeter Based on STM32 Microcontroller Y.Z. Wang, J. Yang and T.L. Han 1261 A Novel Tri-Band Ultra-Wideband Antenna with Deformed Split Ring Resonator for WLAN/WIMAX Applications X.L. Zheng, Q.F. Shi, D.F. Lu and C.Y. Ji 1265 The Research of CIR Based on Communication Technology of GSM-R L.J. Wen and X. Li 1269 An Improved Symbol Synchronization Method in OFDM Systems Based on Training Sequence C. Ding 1273 The Analysis and Simulation of Contact Loss between Pantograph and Catenary on Electric Railway Y.H. Gao, J.X. Wang, K.Y. Yang, T.H. Wang and Z.Y. An 1277 Programmable Logic Controller Program Design Method Research Based on PLC L.W. Wang 1281 Whole Process Management Research for Municipal Power Supply Enterprises other Expenses Based on Value Management J. Li, R.C. Zhao and J.H. Wang 1285 Design of Capacitor Step-Down Regulated Power Supply Based on Current Conduction Angle Adjustable Mode H. Su and Y.G. Jin 1289 An Asynchronous Multi-Channel MAC Protocol Based on Cooperation Mechanism in Vehicular AdHoc Network X.Y. Li and L. Tang 1294 Research and Analysis of Reliability of Power Grid SVG Master Circuit in Rural Areas H.K. Li, W.L. Wang, J.X. Wang, S.H. Wang and L. Hong 1299 Research on Intensive SVG Integrated Power Unit Reliability Analysis Q.X. Jia, G. Tong, Y. Zhao, H.Y. Lv, Q.Y. Meng, S.H. Wang and W. Wang 1302 A Study on Operation Optimization of Chain SVG in Stabilized Voltage of Rural Power Grid 220kV Transformer Substation K.Y. Guo, P. Jin, S.H. Wang and J. Sun 1306

14 l Mechatronics Engineering and Modern Information Technologies in Industrial Engineering Rapid Ambiguity Resolution for Single Frequency Receiver Y.G. Yang and J.T. Xu 1309 A Semi-Blind Channel Estimation Method Based on Improved Particle Filtering for HF Channel S.Z. Zhang 1313 Design and Implementation of Multi-Master GPRS Transparent Transmission Module F.D. Wang, Z.F. Wang, J.B. Fan, J.L. Huang and L.G. Li 1317 A Study on Performance Test of the Self-Cooled System of High-Voltage SVC Valve Group Z.L. Zhang, Q.H. Gang, P. Qiu, S.H. Wang and C.Y. Bai 1322 The Application and Development of IGCC Power Generation Technology in China L. Wang, W.Y. Li and Y. Song 1325 The Numerical Simulation Analysis of the Power Station Boiler Heating Surface Slagging W.Y. Li, L. Wang and Y. Song 1331 Micro-Grid Power Quality Management Z.Q. Gao, H.Y. Chu, L. Meng, S.Q. Sheng, Z.J. Sun, X. Yang and B. Liang 1335 Matpower Based Power Flow Calculation with Grid-Connected Photovoltaic Y. Yang, D.T. Wang, Q.M. Yao and W.Z. Cai 1343 UHV AC and DC Coordinated Operation Techniques Based on Continuous Simulation Y.F. Rao and L.L. Yu 1347 Dynamic Performance Analysis of Extended Range/Plug-In Electric Bus H.W. Chen, X. Zhang and X.S. Zhang 1351 Exergy Distribution Characters Analysis of a 130t/h Biomass-Fired Boiler F. Yang, C.Q. Dong, Z.Z. Kang, Z.M. Zheng and X.Y. Hu 1356 Mobile Maintenance Room of GIS Equipment at the Voltage Class of 220kV G. Wei, M. Xiao, H.Y. Xia, L. Yao and Y.L. Tang 1360 Design of Electrostatic Focusing System for Space Electron Beam Gun D. Wang 1364 A Distribution Network Fault Location Method Based on Reverse Wave and Wavelet Analysis X.M. Zhai, H. Xia and L. An 1369 High Precision GPS Clock Synchronization Method Based on Time Different Compensation X.M. Zhai, L. Yang and L. Yang 1373 Research of Modeling Method of Transmission Line Information Based on IEC61850 X.M. Zhai, L. An and H. Xia 1377 Application and Development of MCGS Configuration Software in Wind/Solar Hybrid System D.M. Cao, Z.H. Tang and D.B. Li 1381 A Short-Term Distributed Load Forecasting Algorithm Based on Spark and IPPSO_LSSVM B.Y. Wang, D.Y. Wang and S.M. Zhang 1385 A Backoff Algorithm for LOWPAN Based on the Dynamically Backoff Exponent Y.J. Zhang, J.L. Shi and G.R. Chen Dimensional Localization Algorithm Research Based on Weighted Fusion with Projected Coordinate Q.Y. Wu, Z.M. Qiu and Z.K. Liu 1394 Harmonic Analyzing and Filtering of Motor Discrete Variable Frequency Soft Starter X.Y. Song, J. Chen, Q. Wang and S.J. Deng 1401 A Simulation Study of Nakagami-m Distribution Y.H. Yang, L.F. Wang and M.X. Shen 1405 Normalized p-norm Blind Equalization Algorithm with Adaptive Momentum under Impulsive Noise Environment R. Ruan and Y. Xiao 1409 Relay Selection Algorithms in D2D Cluster Underlaying Cellular Networks Z.H. Ruan, S.X. Shao and J. Sun 1413 Research and Simulation for Audio Stream Synchronization Algorithm of Multimedia Network R.C. Li 1419

15 Applied Mechanics and Materials Vols m Research on Routing Algorithm Based on Ant Colony Optimization for Wireless Sensor Networks D.Y. Chen, C.M. Zhang, G.Y. Li and T. Tian 1423 Research on the Technology of Service Pricing Optimization Strategy for Mobile Communication Enterprise P. Zhang 1427 Research on the Ultra-Short-Term Bus Load Forecasting Method Considering Meteorological Mutation D.X. Niu, B.J. Li, Y. Lu, Z. Chen and J.K. Liu 1431 The Application of Fuzzy Comprehensive Evaluation in Meteorological Mutation Identification of Load Forecasting D.X. Niu, H.H. Qin and B.J. Li 1436 Analytical Study on the Loss Reduction of Static Var Generator for Power Grid Based on the Soft Switch Technology Y.S. Zhang, Y.B. Dong, H.J. Cao, M. Jin, S.H. Wang and J.H. Wang 1440 Ultra-Short-Term Forecasting Based on Phase Space Reconstruction and Wind Power Wind D.Y. Du and B.F. Chen 1444 Design of FPGA-Based Missile-Borne Image Acquisition and Storage Recorder L. Lu, Y.F. Zhang and X.F. Li 1448 The Stochastic Resonance of Noise Frequency Modulation Signal Using Motion-Group Fourier Transform J.B. He and S.L. Hu 1452 UPT Chaos-Based Encryption Characteristic Analysis for Speech Signal H. Chen, C. Chen and S.B. Gu 1456 Analysis and Research of Mobile Station Location Based on NLOS Error Y.Y. Xu, S.J. Bao and Y.L. Wang 1460 Study on Power-Train Configuration of Hybrid Electric Vehicle Equipped with Dual Clutch Transmission G.P. Wang, Q.N. Wang, P.Y. Wang, Y.H. Zheng and G.M. Lu 1465 Modeling and Simulation of Power-Split Hybrid System L.H. Xi, X. Zhang and B.D. Zhang 1472 Analysis and Application of Pure Electric Buses on the Economic Environment J.D. Yu and Z.Q. Rao 1476 Chapter 5: Numerical Methods, Computation Methods and Algorithms for Modeling, Simulation and Optimization, Data Mining and Data Processing The Positive Integer Solutions of a Diophantine Equation Y. Wu and Z.P. Zhang 1483 A Collaborative Traffic Optimization Strategy to Maximize Airline s Net Income in Single- Aerodrome Terminal Airspace Z. Xiang, Y. Tang and F. Kang 1487 A Composite Framework of Cuckoo Search and PSO Algorithm Z.Q. Gao, L.X. Liu, W.W. Kong and X.H. Wang 1491 A Firepower Assignment Method for Barragging the JDAM Q. Zhang and Y.Y. Ren 1495 A Method for Predicting Air Traffic Network Flow by Short-Term Probability J.F. Kong and Y. Wang 1500 A New Algorithm for Solving TSP and its Applications L. Huo, B. Jiang and T. Ning 1504 A New Classification Method Based on Similar Gravity B. Liu 1509 A Novel Classification Method of Fish Based on Multi-Feature Fusion W.D. Du, B.W. Chen, H.S. Li and C. Xu 1513 A Novel Modeling Method for C4ISR Effectiveness Requirements Q.C. Dong, Y.D. Qi, W.C. Si and Q.H. Chen 1520

16 n Mechatronics Engineering and Modern Information Technologies in Industrial Engineering A Particle Swarm Optimizer Based Approach for Aircraft Parking Position Assignment D.M. Ai, Y.F. Jia, J.Y. Zhao and L.J. Kong 1525 A Personalized Recommendation Model Based on Contextual Information Y.Z. He 1530 A Predator-Prey Model Incorporating Prey Refuge and Allee Effect R.N. Fan 1534 A Review of the Hyperspectral Unmixing Methods that Based on Constrained NMF and Constrained Sparse Regression C.Y. Zheng 1540 A Stochastic Model with Saturation Infection for Internal HIV Dynamics J.Q. Wang and M.X. Liu 1546 A Study of the Designing Rhythm Annotation Rules and the Time Parameter Extraction for Tibetan Speech Y.H. Li and T. Sun 1552 A Study on Selection of the Main Parameters of SVG N. Wang and D.C. Zhang 1556 A Traffic Allocation Algorithm Base on Airline s Profit Maximization in Multi-Aerodrome Terminal Airspace Z. Xiang, Y. Tang and F. Kang 1560 A Traffic Prediction Method Based on the Hybrid Model of CLWT J.L. Fei, W. Lin, T. Han and Y.F. Zhu 1564 An Extraction Method Based on Invariance Geometric Feature R.F. Gong, M.X. Chu and Y.H. Yang 1570 An Improved Algorithm for Super-Resolution Video Y. Zhang and P.P. Jiang 1574 An Improved Cloud Adaptive Genetic Algorithm Based on Cloud Computing for Active Optimization Calculation S.M. Zhang, Z. Wu and B.Y. Wang 1579 An Improved DE Algorithm Based on the New Crossover Strategy C.L. Liang, W.R. Rong and L.M. Dan 1583 An Improved Mean Shift Segmentation Method of High-Resolution Remote Sensing Image Based on LBP and Canny Features Y. Li, J.W. Xu, J.F. Zhao, Y.D. Zhao and X. Li 1589 Analysis and Comparison of Image Enhancement Methods Y.B. Dong, M.J. Li and Y. Sun 1593 Analysis of Ceramic Pattern Primitives Transform Operation B.S. Li and J.F. Hu 1597 Analysis of KATL Operation Simulated by TAAM X.H. Zhang 1601 Analysis of Sad Speech and Neutral-Sad Speech Conversion Y.H. Hou, X.Y. Ma, R. Yuan and Z.Z. Xiao 1605 Analytic Hierarchy Process Method Based on the Cask Theory Y. Li, X.D. Mu, W. Song and H.W. Shi 1610 Application and Research on Distributed Collaborative Filtering Recommendation Algorithm Based on Hadoop X.J. Li and H.B. Yang 1615 Application of Comprehensive Evaluation and Sensitive Analysis in Certain Equipment N. Xie, S. Li, D. Li and X.F. Wang 1622 Application of Legendre Polynomial in Predicting Total Energy Consumption H.Q. Zhang and L.B. Gao 1627 Application of MetaSynthesis in Complex System Simulation L.J. Kong, J. Li, X.J. Zhao and F. Zhang 1631 Application of Moments in Qualitative Analysis on Borehole Trajectory Curving R. Yuan and Y.Q. Sun 1635 Application of Rough Sets Theory in Graduate Enrollment J. Huang 1640 Architecture of Cloud-Based Crime Spatial Data Mining Platform W.P. Yang and D.Q. Duan 1644

17 Applied Mechanics and Materials Vols o Attribute Reduction of Intuitionistic Fuzzy Concept Lattices H. Wang and H.J. Zhang 1649 Automatic Generation of Design Scheme Based on Improved Segmentation Genetic Algorithm J.W. Chen, B. Huang, B. Pang and L. Li 1655 Cleaning Uncertain Database with Aggregate Constraints Based on the Modified Simulated Annealing Algorithm J.C. Shan, B. Liu and Q.B. Liu 1661 Collision Simulation to Road Safety Barrel Based on LS-DYNA K. Song and B.C. Yang 1665 Crop Disease Leaf Image Segmentation Based on Genetic Algorithm and Maximum Entropy M.G. Du and S.W. Zhang 1670 Digital Audio Watermarking Based on QR Decomposition and Dither-Modulation Quantization L. Shi, B.L. Yang and P.H. Wu 1675 Drawing Hypergraphs in Hyperedge s Average Degree and Multi-Rules J. Jia, X.Y. He and X.F. Hu 1682 Electropalatographic Parameter Analysis of Single Consonant of Xiahe Tibetan Dialects Y.H. Li, P.C. Dawa and H. Wu 1689 EL-SVDD: An Improved and Localized Multi-Class Classification Algorithm J.X. Peng and J.X. Tan 1693 Energy Minimization Model Based Target Tracking W. Sun, S.H. Zhu and C.J. Sun 1699 Energy-Saving Scheduling Algorithm of Public Transport Bus Based on Passenger Flow Distribution in Different Time L.Y. Shi 1703 Environmental Quality Assessment Based on a New Kind of Neural Network Using Rational Spline Weight Functions D.Y. Zhang and S.J. Hou 1708 Equivalence Class Based Parallel Algorithm for Mining MFI H. Wang 1712 Error Analysis of Neural Network with Multiply Neurons Using Rational Spline Weight Functions D.Y. Zhang and L.L. Wang 1716 Fast Inpainting Algorithm of Woodblock New Year Pictures Damaged Area Based on Combination of Texture Distribution Analysis and Anisotropic Diffusion Technique W.W. Yi 1721 Global Stability of an Age Structured SEIRS Epidemic Model with Screening Z.H. Zhang and Y.H. Suo 1725 High-Rise Residential Complex Wind Aerodynamics Simulation O.O. Egorychev, S.I. Dubinsky and A.N. Fedosova 1729 Improved Algorithm Based on Item Code and Rough Intensive Reduction Algorithm in the Application of Disease of Vegetable Leaf Image Mining X.L. Luo 1733 Improved Genetic Algorithm on Minimum Spanning Tree of Length Constraint Problem Y.Y. Duan, K. Zhou, W.B. Dong and K. Shao 1737 Improved RSA Algorithm and Application in Digital Signature Z.J. Xiao, Z.T. Jiang, Y.B. Wang and H. Chen 1741 Intelligent Optimization of Urban Real-Time Traffic Route Based on DNA Non-Dominated Sorting Genetic Algorithm M. Zhu, B. Su and G.M. Ning 1746 Literature Review on Hidden Markov Model-Based Sequential Data Clustering M. Ji, F. Wang, J.N. Wan and Y. Liu 1750 Logistic Regression Analysis on the Survival Time for Patients with Lung Cancer S. Ma 1757 Logistics Route Optimization Based on Improved Fish Swarm Algorithm F.K. Xu 1761

18 p Mechatronics Engineering and Modern Information Technologies in Industrial Engineering MaxMining: A Novel Algorithm for Mining Maximal Frequent Itemset H. Wang 1765 Method for Selecting Storage Enterprises Based on IFHA J. Wu, L.N. Zheng and T.J. Pan 1769 Modeling Method Based on Smooth Support Vector Regression with Independent Component Analysis Feature Extraction X.S. Gan, X.Q. Tang and H.L. Gao 1773 Multi-Objective Optimization of Freeway Network Traffic Flow Using Particle Swarm Optimization K.G. Wen 1777 Numerical Simulation of Fluid-Structure Interaction Relations between Skull and Brain Based on ALE and Overlapping Mesh Methods J.X. Jin, J.Y. Zhang, X.W. Song, H. Hu and X.Y. Sun 1782 Numerical Simulation of Particle Separation in a Hydrocyclone J.J. Hong, D.Y. Xi and W.X. Jiao 1786 Numerical Simulation of the Fixed Assets Z.N. Li, Y.L. Chen and D.J. Ma 1790 Numerical Simulation on Pressure Field Characteristics of Underwater Explosion with Double Explosive Sources X. Lu, S.S. Wang, F. Ma and Y.P. Hao 1794 On Point Estimations of some Uniform Distributions J.L. Wang, M.F. Zhou and Q. Wu 1800 Orange Feature Extraction and Description Based on Image Processing C.H. Qian, H.Q. Qiang and S.R. Gong 1804 Outlier Detection Clustering Algorithm Based on Density Y.L. Leng, H. Shen and F.Y. Lu 1808 Population Analysis Based on Neural Network of Rational Spline Weight Functions with Cubic Numerator and Quadratic Denominator D.Y. Zhang and J.K. Wang 1813 Recursive Particle Swarm Optimization Application for the Radial Basis Function Networks Modeling System L. Liu, M. Chen and H.Y. Guo 1817 Research of Orange Quality Classification Technology Based on BP Neural Network Algorithm C.H. Qian, H.Q. Qiang and S.R. Gong 1821 Research of Topology Optimization of Nodal Density Based on Bilinear Interpolation Y.X. Du, S.Q. Yan, H.H. Xie, Y. Zhang and Q.H. Tian 1825 Research on Automatic Text Classification Algorithm Based on ITF-IDF and KNN R. Chen, F. Chen and Y. Sun 1830 Research on Bifurcation of Asymmetric System Based on Second-Order Averaging Method A.K. Hu, Y.C. Liu, Y. Lu and F.L. Han 1835 Research on Data Mining in the Information Network Application X. Zhao and Y.H. Huangfu 1839 Research on Digital Watermarking Algorithm Based on Discrete Wavelet Transform and Singular Value Decomposition Y.Y. Wang 1843 Research on Gesture Speed Estimation Model in 3D Interactive Interface Z.Z. Huang, Z.Q. Feng, N.N. He and X.W. Yang 1847 Research on Matching Pair Purification Methods of Image Based on SIFT Algorithm Q. Li and Q.Y. Sun 1851 Research on Nonlinear Approximation Model of Radial Basis Function Neural Network Trained Using Artificial Fish Swarm Algorithm with Adaptive Adjustment X.S. Gan, X.Q. Tang and H.L. Gao 1855 Research on Polarization Image Fusion Using Tetrolet Transform D.X. Zhang, B.H. Yuan and J.J. Zhang 1859 Research on Privacy Preserving Classification Algorithm X.Y. Ren and W. Yuan 1863

19 Applied Mechanics and Materials Vols q Research on Scheduling Model in Dynamic Environment Based on Computational Economy L.J. Duan 1868 Research on the Color Mixingand Embedding of Infrared Detectable Watermark Studies D.S. Cong, L.P. Feng and H.H. Lyu 1872 Research on the Confidence Regression Based on KNN Algorithm F.C. Jiang and S.F. Tian 1877 Research on the Era Environment of Data Mining X. Zhao and Y.H. Huangfu 1882 Research on the Image Based on the Visual Sensory Apply to the Layout Design G.L. Gu 1886 Research on the Validation Method of Advanced Driving Simulators Based on the Speed Perception Model L.W. Zhu, Y. Sun and Z.Y. Zhang 1890 Sediment Yield Simulation Using SWAT Model for Water Environmental Protection in an Agricultural Watershed K. Xu, H.Q. Peng, D.G.J. Rifu, R.X. Zhang, H. Xiao and Q. Shi 1894 Seeking Primary Functions of Complete Differential with Six Variables Y.G. Huang, W.S. Wang and H.Y. Zhong 1899 Shadow Removal Based on Multi-Feature Fusion of Multiple Moving Objects Scene Q.S. Yang and X.L. Wang 1903 Short-Term Forecast of Blast Furnace Gas Production Amount Based on Grey RBF Neural Network Z.M. Lv, Z. Wang and Z.Y. Wang 1907 Simulation and Prediction of Excellent Students Based on System Dynamics P.Q. Qi and Y.F. Chen 1914 Sleep Sensor Temperature Prediction Based on Neural Network Training Algorithm with Rational Spline Weight Functions D.Y. Zhang and H. Zhang 1918 Sorting Algorithm for Uniform-Distributed Data Y. Jia 1922 Spatial Resolution Enhancement for Hyperspectral Image Using Gaussian Scale Mixtures J. Liu and Y.F. Zhang 1926 Stereo Matching Algorithm Based on Belief Propagation System S.C. Pan 1931 Study of the Cluster Analysis Algorithm for Radio Advertising J.H. Liu, Y.T. Fu, Q. Zhang and Y.T. Geng 1935 Study on Prediction Model of Grain Yield Based on Principal Component Analysis and BP Neural Network X.M. Xu, L.Y. Cao and J. Zhou 1939 Study on the Differences in Grain Production Capacity of the Region in Jilin Province Based on Cluster Analysis X.M. Xu, L.Y. Cao and J. Zhou 1943 The Agriculture Vision Image Segmentation Algorithm Based on Improved Quantum- Behaved Particle Swarm Optimization M.H. Deng, Z.C. Li and S.P. Zhu 1947 The Analysis and Evaluation of Differentiated Transit Fare Structures D. Huang, Z.Y. Liu and J.C. Cheng 1951 The Application of Time Series Analysis Model in the Prediction of Rice Blast L.Y. Cao, H.L. Yu, G.F. Chen and P. Sun 1955 The Bus Data Model, the Principle and Algorithm Implementation of Query System Q. Zhang, J. Shi and J.J. Dong 1959 The Feasible Coalitional Structures in the Weighted Cooperative Games S.B. Chen, Z.D. Hu and M. Zhang 1963 The Limit is Calculated by Using the Main Part of the Function W.X. Duan 1967 The Method Research on Data Mining of Concept Lattice C. Liu, D.X. Wang and K. Tan 1970