MASTER PROJECT TITTLE (MECHANICAL ENGINEERING) SEMESTER III, SESSION 2014/2015

Size: px
Start display at page:

Download "MASTER PROJECT TITTLE (MECHANICAL ENGINEERING) SEMESTER III, SESSION 2014/2015"

Transcription

1 KOD TITTLE SUPERVISOR/CO-SUPERVISOR D01 Development of axial flow air swirler for emissions reduction from oil burner Prof. Dr. Mohammad Nazri Mohd. Jaafar D02 Study On Droplet Size Of Kerosene Prof. Dr. Mohammad Nazri bin Mohd Jaafar D03 Study On Droplet Size Of Biodiesel Blends Prof. Dr. Mohammad Nazri bin Mohd Jaafar D04 Performance Study Of Biodiesel Blends On Burner System Prof. Dr. Mohammad Nazri bin Mohd Jaafar D05 Performance Study Of Biodiesel Blends On Burner System Applying Air Staging Prof. Dr. Mohammad Nazri bin Mohd Jaafar D06 Study On Droplet Size Of Diesel Fuel Prof. Dr. Mohammad Nazri bin Mohd Jaafar D07 Feasibility Study Of Using Biodiesel Blends In Gas Turbine Engine Prof. Dr. Mohammad Nazri bin Mohd Jaafar D08 Pelletisation and Carbonization of Solid Biofuel Prof. Dr. Farid Nasir Hj. Ani D09 Processing of Biodiesel From non edible oil Prof. Dr. Farid Nasir Hj. Ani (New Title) D10 Design and Development of a Mini-Particulate Tunnel for Sampling of Diesel Particulates Prof. Ir. Dr. Azhar Dato' Abdul Aziz D11 Numerical simulation of heat transfer in biological system microchannels Prof. Madya Dr. Normah Mohd. Ghazali D12 Study of Vortices in a Standing Wave Acoustic Chamber Prof. Madya Dr. Normah Mohd. Ghazali D13 Numerical Simulation of an Oscillating Flow in an Expanded Channel Prof. Madya Dr. Normah Mohd. Ghazali D14 Entropy Minimization Analysis of a Therrmoacoustic Stack. Prof. Madya Dr. Normah Mohd. Ghazali D15 Simulation of Multiple micro-jet cooling microchip Prof. Madya Dr. Normah Mohd. Ghazali D16 Analysis of heat transfer in a microchannel close to rarefaction effects Prof. Madya Dr. Normah Mohd. Ghazali D17 Simulation Of Multiple Micro-Jet Cooling Of Microchip Prof. Madya Dr. Normah Mohd. Ghazali D18 Simulation OF Fluid Flow With Suspended Nanoparticles Prof. Madya Dr. Normah Mohd. Ghazali

2 D19 Simulation Of A Microchannel Heat Sink With Hot Spots Prof. Madya Dr. Normah Mohd. Ghazali D20 Mixed Convection in a Heated Partitioned Lid-Driven Enclosure Prof. Madya Dr. Normah Mohd. Ghazali D21 Acoustic streaming in a therrmoacoustic resonator Prof. Madya Dr. Normah Mohd Ghazali D23 D24 D25 Study Of Aerodynamic Noise Direction and Intensity Of A Side Mirror Of A Car Particle Image Velocimetry (PIV) Measurement Of Counter Rotating Vortex Pair In Cross Flow Development Of A Software Suite to Design Centrifugal Pump Blades Automatic 2-D Mesh Generation of Centrifugal Pump Blade Passage Using Boundary-Fitted Coordinate System Prof. Madya Dr. Tholudin bin Mat Lazim Prof. Madya Dr. Tholudin bin Mat Lazim / Prof. Madya Dr. Abu Hasan bin Abdullah D26 D27 Automatic 2-D Mesh Generation Procedure for Unstructured Tetrahedral Grids Development Of A Sofware Suite for Analytical Turbocharger-Engine Matching For LP Turbocharging Of Passenger Car Gasoline Engine D28 Analytical turbocharger-engine matching technique using a quasi-dynamic step-by-step computer program D29 Automatic 2D mesh generation of centrifugal pump blade passage using boundary-fitted coordinate system D30 Design, Analysis (AGMA) and Simulate of A Contra- Rotating Gear System Prof. Madya Dr. Mohd Shariff b Ammoo D31 Design and Analysis of a Microturbine Turbine Prof. Madya Ainullotfi Abdul Latif D32 Design & Analysis of a Microturbine Compressor Prof. Madya Ainullotfi Abdul Latif D33 Structural Design & Analysis of a CO2 Compressor for Airconditioning Systems Prof. Madya Ainullotfi Abdul Latif D34 Study Of The Impact On FRC Train Head Surface Prof. Madya Ainullotfi Abdul Latif D35 Modelling and Analysis Of The Eagle Composute Wing Structure Prof. Madya Ainullotfi Abdul Latif D36 D37 D38 Experimental Study Microwave Plasma Gasification Computer Simulation of Natural Ventilation on Buildings Experimental Study of Ejector Air-Conditioning System Prof. Dr. Farid Nasir Hj. Ani (New Title) Prof. Dr. Farid Nasir Hj. Ani Prof. Dr. Farid Nasir Hj. Ani (New Title)

3 D39 D40 D41 D42 D43 Study On Co-Pysolysis of Solid Waste Film Thickness in Elastohydrodynamic Lubrication For Bio-Based Lubricants in Rectangular Conjuction Neoro-Modelling of A Twin Rotor Multi System Kinematic of Human Arm and Finger for Product Design Evaluation Generic Data Acquistion Ptalform (DAQ) for Engineering Systems Prof. Dr. Farid Nasir Hj. Ani (New Title) Dr. Kahar Osman / Mr. Zubil Bahak Dr. Intan Zaurah Mat Darus Dr. Jamaludin bin Hj Mohd Taib Dr. Srithar a/l Rajoo D44 Modelling And Analysis Of The Active Control Turbocharging (ACT) With An 1- Dimension Engine Code Dr. Srithar a/l Rajoo D45 D46 D47 D48 D49 D50 Data Analysis For The Unsteady Flow Experiments of Turbocharger Turbines Study on the Optimum Size for Micro Pit on Extrusion Process Experimental Evaluation of Dead Metal Zone of Workpiece Extruded With Vegetable Oil Study on The Effect Of micro Grooves in Plane Strain Extrusion Process Mini Dilution Tunnel For Soluble Organic Fraction (SOF) and Solid Fraction (SOLID) Measurement. Transient Dynamics Of Pipe With Flowing Medium Dr. Srithar a/l Rajoo Dr. Syahrullail bin Samion Dr. Syahrullail bin Samion Dr. Syahrullail bin Samion Dr. Wira Jazair Yahya / Dr. Srithar Rajoo Prof. Madya Dr. Amran Ayob D51 Ratcheting of steel pipes subject to internal pressure and bending moment (NEW TITLE!!) Prof. Madya Dr. Amran Ayob (New Title) D52 Renewable Energy Support Policy in Malaysia: a Comparative analysis with EU Dr. Md. Mizanur Rahman D53 Long-term Energy Development Pathways for Malaysia: a Scenario Base Analysis Dr. Md. Mizanur Rahman D54 Providing Electricity Access for 1.2 Billion Un-electrified People in The World: Pathways and Challenges Dr. Md. Mizanur Rahman D55 Economics of Small-Scale Power Generation from Renewable and Hybrid Sources Dr. Md. Mizanur Rahman D56 System Identification and Control of Pieza Electric Actuator D57 Numerical Study of The Stability Limits of LPG-Air Premixed Flames Dr. Mohd Zarhamdy Md. Zain/Dr. Mohamed Hussein

4 D58 Theoretical Study of Flame Speed in Unconfined Gaseous Explosions D59 Simulation of The Turbulence-combustion Interaction in Non-Premixed Propane Flame D60 Numerical Study of CH4 Air Premixed Flame- Obstacle Interaction D61 Dynamic characteristics and energy absorption of fiber metallaminate (FML) thin D62 Numerical Study on Energy Absorption Capability of Multi-cell Turbular Strustures D63 Dynamic Energy Absorption Performances of Auxetic- foam- filled thin Walled tubes D64 Experimental Modal Analysis on Automotive Subframe Structure D65 Numerical and Experimental Studies on The Dynamic Characteristics of Automotive Door D66 Determination of Burning Rates and Properties Using Graphical User Interface D67 Measurement of Spark Ignition Energy D68 Thermal Analysis and Symulation of Hybrid Vehicle Battery Pack D69 Development of Liquid Cooling System For Battery Pack

5

6 D59 System Identification and Control Of Pieza Electric Actuator Dr. Mohd Zarhamdy Md. Zain / Dr. Mohamed Hussein D60 Numerical Study of The Stability Limits of LPG-Air Premixed Flames D61 Theoretical Study of Flame speed in unconfined gaseous explosions D62 Simulation of The Turbulence-combustion interaction in Non-Premixed Propane Flames D63 Numerical Study of CH4 -Air Premixed Flame-Obstacle Interaction D64 Dynamic characteristics and energy absorption of fiber metallaminate (FML) thin-walled tubes D65 Numerical study on energy absorption capabilityof multicell tubular structures D66 Dynamic energy absoption performances of auxeticfoam-filled thin-walled tubes D67 Expermental modal analysis on automotive subframe structures D68 Numerical and experimental studies on the dynamic characteristics of automotive door frame D69 Pneumatic Artificial Muscle Actuated Robot Arm using Hardware-in the-loop Simulation Prof. Dr. Musa Mailah Dr. Suhail Kazi D70 Dynamic Behaviour of Intermediate Vehicle Model Dr. Afandi Dzakaria Mr. Badri Abd Ghani D71 Dynamic Behaviour of 14 Degrees of Freedom of Model Dr. Afandi Dzakaria Mr. Badri Abd Ghani D72 Capturing Deep Thought For Creativity from the Viewpoint of 'Flow' Mental State Dr. Nor Fasiha Mohd Yusof (New Title) D73 Pattern of Concept Development in Design Activities Dr. Nor Fasiha Mohd Yusof D74 Pattern of Relationship Among Concepts in Design Activities Dr. Nor Fasiha Mohd Yusof (New Title) D75 Deep Pattern of Relationship Among Concepts in Design Activities Dr. Nor Fasiha Mohd Yusof D76 Determination of Burning Rates and Properties using Graphical User Interface D77 Measurement of Spark Ignition Energy (New Title)

7 D78 Thermal Analysis and Simulation of Hybrid Vehicle Battery Pack (New Title)

8 D79 Development of Liquid Cooling System For Battery Pack (New Title) D80 The Study of Limitations of Seevral Vehicles Handling Models Dr. Afandi Dzakaria / Dr. Jamaluddin Mohd Taib D81 Vehicles Motion Characteristics Under Driver Control Dr. Afandi Dzakaria / Dr. Jamaluddin Mohd Taib D82 Aerodynamic Forces on Human Body Assoc. Prof Sallehuddin Muhamad D83 Vortex Flow Behind An Inclined Flat Plane Assoc. Prof Sallehuddin Muhamad D84 Propulsive Effieciency of a small Diameter Propeller Assoc. Prof Sallehuddin Muhamad D85 Computational Fluid Dynamic of Fluid Characteristic on Cancellous Bone Structure Dr. Adriyansyah Syahrom / Dr. Muhamad Noor Harun D86 Comparison External and Internal Fixation of Plateau tibia Foxetune to Influence Stability of Bone and Implant. Dr. Adriyansyah Syahrom / Dr. Muhamad Noor Harun D87 Study of Fluid Characteristic of Cancellous Bone Structure (experimental) Dr. Adriyansyah Syahrom / Dr. Muhamad Noor Harun D88 D89 D90 D91 D92 D93 Fatigue Life Prediction in Cancellous Bone Structure with Physiological Activities (Normal Walking) as Loading Numerical Analysis of Ventilation System For A Multiple- Bed Hospital Ward With A Bay-Wards Arrangement Using CFD Simulation The Influence of Physical and Air-Curtain for Air Supply Diffuser on Air Flow and Contaminants Transport Patterns Inside A Hospital Operating Effects of Air Supply Parameters and Room Geometry on Contaminants Transport In A Hospital Operating Room Analysis of Ventilation System For A Multiple-Bed Hospital Ward With A Nightingle-Wards Arrangement Using CFD Method Design of Dimples For Metal-On-Metal Hip Joint Replacement Dr. Adriyansyah Syahrom / Dr. Muhamad Noor Harun Dr. Haslinda Mohamed Kamar / PM. Dr. Nazri Bin Kamsah Dr. Haslinda Mohamed Kamar / PM. Dr. Nazri Bin Kamsah Dr. Haslinda Mohamed Kamar / PM. Dr. Nazri Bin Kamsah Dr. Haslinda Mohamed Kamar / PM. Dr. Nazri Bin Kamsah Muhamad Noor Harun / Dr. Ardiyanshah Syarom